Generation of optical vortices with arbitrary shape and array via helical phase spatial filtering

We report a method for generation of arbitrary shape and array of optical vortices by use of a superposition of coherent elementary vortices based on helical phase spatial filtering in spatial frequency domain. In this method, a helical phase spatial filter (HPSF) is placed in the spatial frequency plane of a 4-f imaging processing system. We demonstrated that the output field distribution represents the convolution between the input field and an elementary vortex field introduced by the HPSF, which results in a special shape or array of optical vortices determined by the “degenerate” properties of coherent elementary vortices and the distribution formats of the input field.     

微射流阵列冲击恒热流壁面换热数值模拟

微射流冲击作为一种高热流冷却技术,在大功率激光器、微电子芯片等微型高热流器件冷却方面有广阔应用前景.本文对微射流阵列冲击恒热流表面的换热情况进行数值模拟,详细分析了微射流阵列的换热特点,对比了射流孔顺排和叉排方式的冷却性能,得出射流入口雷诺数、射流孔间距、射流高度等因素对冷却特性的影响规律.     

液幕式吸收塔中传质模型研究

对液幕式吸收塔脱硫性能进行了实验研究,研究了烟气流量、循环浆液量、浆液浓度,喷嘴阵列形式等参数对脱硫性能的影响,合理选择装置结构和运行参数时,脱硫效率可达90%以上;提出了液幕式吸收塔中当量传质面积的计算方法,建立了液幕式吸收塔的传质模型,得到了液幕式吸收塔的传质系数关于气相和液相雷诺数及喷嘴阵列的经验关系式。     

阵列射流冲击冷却局部对流换热特性的数值计算与试验验证

本文运用数值计算的方法对具有初始横流的阵列射流在不同的排列方式、冲击间距和横流/射流质量流量比下 的流动换热进行了三维数值研究,并采用热色液晶测试技术对阵列射流冲击的冷却表面温度分布进行了试验研究。获得了 每一股射流的冲击冷却局部对流换热系数分布的特征,研究结果表明本文的计算结果与实验特征是基本吻合的。     

直线阵光学综合孔径成像中的子孔径尺寸效应

光学综合孔径阵列中的子孔径的位置和直径的大小对成像质量有着重要的影响。详细分析了几种不同优化排列的光学综合孔径直线阵列的无像差点扩展函数、光学传递函数和衍射成像特性．结果表明,子孔径的位置不同．光学传递函数的空间频率覆盖有很大的差异。增大子孔径的直径可以增大空间频率覆盖程度．但子孔径直径过大时义会产生空间频率冗余度和增加制造成本。直线阵光学综合孔径的衍射成像是多重像,子孔径直径的增大还可以减小重影的程度,提高成像质量。结果说明,在进行光学综合孔径阵列优化排列时必须考虑子孔径的直径大小这个重耍的因素。     

平板蒸汽腔与微热管阵列组合式传热装置

本文对一种平板式蒸汽腔(均温板)与微热管阵列组合式换热装置进行了传热特性的研究,并将其用于大功率LED的散热.这种组合式换热装置既具有均温板的超高临界热流密度与全向传热的特性,同时具备微热管阵列远距离热输运的优良特性,是解决诸多高热流及其它极端条件下的散热,尤其是被动散热问题的有效方式.     

Electronic transport through a periodic array of quantum-dot rings

Using the tight-binding approximation and the transfer matrix method, this paper studies the electronic transport properties through a periodic array of quantum-dot (QD) rings threaded by a magnetic flux. It demonstrates that the even--odd parity of the QD number in a single ring and the number of the QD rings in the array play a crucial role in the electron transmission. For a single QD ring, the resonance and antiresonance transmission depend not only on the applied magnetic flux but also on the difference between the number of QDs on the two arms of the ring. For an array of QD rings, the transmission properties are related not only to the even--odd parity of the number $N_{0}$ of QDs in the single ring but also to the even--odd parity of the ring number $N$ in the array. When the incident electron energy is aligned with the site energy, for the array of $N$ rings with $N_{0}={\rm odd}$ the antiresonance transmission cannot occur but the resonance transmission may occur and the transmission spectrum has $N$ resonance peaks ($N-1$ resonance peaks) in a period for $N={\rm odd}$ (for $N={\rm even}$). For the array of $N$ rings with $N_{0}={\rm even}$ the transmission properties depend on the flux threading the ring and the QD number on one arm of the ring. These results may be helpful in designing QD devices.     

基于微透镜阵列匀束的激光二极管面阵抽运耦合系统分析

为了提升高功率固体激光器中激光二极管(LD)面阵抽运场性能,采用几何光学和数理统计分析的方法,建立了基于微透镜阵列匀束的LD面阵抽运耦合系统的数学与物理模型,对微透镜阵列参数与最终耦合输出抽运场参数之间的关系进行分析,明确了微透镜单元F数、微透镜通光单元数以及微透镜阵列空间周期参数的设计原则.经实验测试,优化设计完成的LD面阵抽运耦合系统光场不均匀度为7.9%,耦合效率为90.7%.     

基于深度神经网络的水声信号恢复方法研究*

针对干扰或噪声环境下水声目标信号难以获取的问题,该文提出研究基于深度神经网络的自适应水声被动信号波形恢复方法。在单阵元情况下,该方法提取对数功率谱特征作为输入,采用深度神经网络回归模型自适应学习目标信号的自身特征,输出降噪后的对数功率谱特征并还原时域波形。在多阵元情况下,提出阵列深度神经网络降噪方法,将部分或全部阵元特征拼接为长向量作为输入,从而利用空域信息。为全面利用阵列丰富的时频域信息,该文提出一种两阶段特征融合深度神经网络,在第一阶段将阵列分为若干个子阵,将每个子阵分别用阵列深度神经网络进行处理,在第二阶段将第一阶段的各子阵处理结果与阵列接收信号同时输入一个深度神经网络进行融合学习。实验表明,所提出的单阵元和两阶段融合深度神经网络取得了显著优于常规波束形成的恢复结果,能够准确估计目标信号波形和功率并显著提高输出信噪比。     

Non-Uniform Onset of Nucleate Flow Boiling of R-134a Inside a Glass Minichannel

The present work is an experimental investigation of the incipient boiling of R134a inside a circular glass minichannel mounted horizontally and equipped with a series of transparent indium tin oxide heaters. The effects of heat flux input levels and refrigerant mass fluxes on the onset nucleate boiling process and on the saturated boiling heat transfer rate are quantitatively explored. The flow pattern visualizations, carried on by means of a high-speed camera, show that the nucleation process is oddly non-uniform: the first vapor bubbles are always generated on the upper side of the tube and lead to a first wall temperature drop. A further increase in the heat flux values results in an increased wall superheat until bubble nucleation also originates on the lower side of the tube, causing a second wall temperature drop. Finally, at higher heat input levels, the boiling process becomes uniformly distributed on the inner tube surface. This phenomenon occurred also after a 180° rotation of the glass tube, and, after a critical analysis of the potential origins, it remains presently unexplained. An evaluation of heat transfer coefficients for low vapor quality regimes is finally presented.     

一种新型的液闪阵列成像屏空间分辨特性

针对低强度射线成像,自主研制了一种像元为0.1 mm高探测效率的液闪阵列屏.为此,基于倾斜刀口边缘响应的测量原理,建立了理论模拟方法和实验研究方法,对该液闪阵列屏开展了空间分辨性能研究.通过理论模拟,给出了液闪阵列屏在14 MeV中子和1.25 MeV伽马射线激发下的调制传递函数,并与像元为0.1,0.3和0.5 mm的闪烁纤维阵列屏进行了理论对比.在60Co伽马射线源上,对液闪阵列屏和像元为0.3和0.5 mm的两种国产闪烁纤维阵列屏进行了调制传递函数实测研究.理论模拟和实验结果一致,均表明液闪阵列的空间特性优于闪烁纤维阵列屏,而且具有更好的均匀性,对1.25 MeV伽马,空间分辨接近0.9 lp/mm,而其他两种纤维阵列屏仅达到0.5 lp/mm,对于14 MeV中子,液闪阵列屏的空间分辨可达到1.8 lp/mm.     

Least squares approach in wavenumber domain for sound field recording and reproduction using multiple parallel linear arrays

A novel signal processing method is proposed for sound field recording and reproduction using multiple parallel linear microphone and loudspeaker arrays. In sound field recording and reproduction, the problem is how to calculate the transfer filters that transform the signals recorded by microphones into the driving signals of the loudspeakers. The proposed method is based on the spatial Fourier transform in the horizontal angle combined with the least squares (LS) approach in the elevation angle. In the proposed method, the signals recorded by each linear microphone array and those that drive each loudspeaker array are decomposed into the wavenumber domain by the spatial Fourier transform in the horizontal direction. The transfer filters are then calculated by the LS approach in the wavenumber domain. As a result, the size of the matrix of each transfer function in the wavenumber domain is much smaller than that of the conventional LS approach in the temporal frequency domain (LSTF), and well-conditioned stable transfer filters can be obtained with low computational cost without regularization. Computer simulation results show that the proposed method reconstructed a sound field around the control points as accurately as the conventional LSTF.     

竖直管道内湍流混合对流换热研究

本文对空气在竖直圆管中的湍流混合对流换热进行了实验研究和数值模拟,并对异种气体(氦气)对混合对流换热的影响进行了初步的实验研究。研究发现,空气在竖直圆管中向上流动时,随着热流密度的不断增大,出现换热恶化现象。如果浮升力足够大,则换热效果在降到最低点后又好转。在实验过程中,由于实验条件所限没有发现异种气体对混合对流换热有显著的影响。     

超流氦浴中的热波传热研究

热波传热机制是超流氦传热非常重要的一个方面.在小热流密度的情况下,超流氦中的热波完全保持加热热流的波形,热量的传输完全靠热波来完成;随着热流密度的增加到一定程度,会在超流氦浴中激发量子涡旋.量子涡旋使热波发展成为热激波.在开放氦浴中,热波的波形不同于狭窄通道里的热波,在热波的尾部会出现一个冷却波;并且随着加热时间的变化,冷却波的形状和幅度会发生很大的变化.运用二流体模型和涡旋方程对超流氦中的热波进行了计算,实验结果与计算结果吻合得较好. 关键词： 超流氦 热波 量子涡旋 热激波     

HL-2A ��������λ���ؽ��о�

采用了新的放电方案,消除了环向场对磁测量的影响。通过修改信号调理电路,解决了积分器不能响应磁通快速变化的问题;通过改进磁测量的标定方法,在准确标定磁通和极向磁探针测量的同时,有效地标定了径向磁探针的测量信号。输入这些有效标定数据后,EFIT能快速收敛,获得了准确可靠的位形重建结果,与探针、氢阿尔法和CCD等诊断结果很好符合。同时介绍了自行研制的sFIT位形重建代码,该代码得到的位形重建结果,与EFIT反演结果一致。     

HL-2A 等离子体位形重建研究

采用了新的放电方案,消除了环向场对磁测量的影响。通过修改信号调理电路,解决了积分器不能响应磁通快速变化的问题;通过改进磁测量的标定方法,在准确标定磁通和极向磁探针测量的同时,有效地标定了径向磁探针的测量信号。输入这些有效标定数据后,EFIT 能快速收敛,获得了准确可靠的位形重建结果,与探针、氢阿尔法和CCD 等诊断结果很好符合。同时介绍了自行研制的sFIT 位形重建代码,该代码得到的位形重建结果,与EFIT 反演结果一致。     

二维圆周光综合孔径阵的优化排列及其成像特性研究

光综合孔径成像的原理是应用干涉原理在空间频率域中进行采样,并通过傅里叶反变换或其他数值变换方法得到空间分辨力远高于单个孔径成像系统的目标图像。由若干个相同的小孔径在二维圆周上优化排列组成的综合孔径成像系统可以在二维空间频率域中实现较为均匀分布的、具有无冗余度的采样点覆盖,为高质量实时成像提供了一个有效的途径。运用模拟退火算法对由7～16个子孔径组成的二维圆周综合孔径阵列进行优化排列。并依据光学衍射成像原理,从空域和频域两个方面详细分析了二维圆周上优化排列与均匀排列光综合孔径阵的成像特性。对7～16个子孔径组成的光综合孔径的仿真结果表明：无论是在空域还是频域上,子孔径直径增大、孔径数目增多以及综合孔径阵的优化排列都是有利于提高成像质量的。但综合后的子孔径的直径的增大,虽然能获得极高的角分辨力,却并不利于成像质量的提高。     

Simulation of a polarization pupil filter using magneto-optic lens under elliptically polarized illumination

An active lens made of magneto-optic glass element and placed before a linear polarizer is shown to simulate the pupil plane amplitude and phase filter due to thickness dependent Faraday rotation variation in radial direction. Changing the applied magnetic flux density can dynamically change the pupil characteristics. The variation of intensity point spread function (IPSF) and optical transfer function (OTF) with magnetic flux density for elliptically polarized input beam is studied.     

Simultaneous Determination of the Amplitude-Phase Structure of an Optical Signal and a Transfer Function with the Influence of the Medium Given by a Modulation Function

We consider a solution to the phase problem in optics as applied to registering and analyzing amplitude-phase structures of 1) d optical fields that form or transfer images and 2) transfer or spread functions of the medium where optically inhomogeneous fields propagate or those of the systems forming fields and producing distortions. The influence of the medium is characterized by the modulation function and is described by the operation of multiplication. In order to measure the amplitude and phase field characteristics and transfer or spread functions, we use an original development of the modulation-spectral method proposed earlier by the authors. There are two variants of optical schemes considered. They include identical parts designed to form the light field to be processed. Using the first optical system, one forms the spectrum of spatial frequencies and introduces the first additional space modulation in the plane of spatial frequencies. The second optical system is placed in the same plane to form the image of the investigated field in the input plane of the developing scheme after passing the transmitting medium. In the first variant, the second part of the scheme contains at the input the third optical system forming the spatial spectrum in the registration plane. At the input of this scheme, the second additional spatial modulation is introduced. In the second variant, the third optical system forms the image of the developing scheme input plane in the registration plane. The second additional spatial modulator is placed in the spatial frequency plane of the third optical system. In the output, in both cases four independent two-dimensional intensity distributions are registered, which allow one to solve the formulated problem.     

基于实际空间截止频率的稀疏孔径双圆周阵列的优化

提出了一种新的稀疏孔径光瞳结构-两个圆周阵内外嵌套而成的双圆周结构,并研究了该结构的调制传递函数.该结构以实际空间截止频率作为约束条件,保证调制传递函数在最小截止频率以内无零频,以阵列的u-v覆盖点间距最大化及最小冗余度来设计目标函数,并采用这种优化方法对3-3、5-3以及6-3双圆周阵列进行了优化排列.将优化结果与相同子孔径数目的均匀圆周阵以及Golay结构进行仿真实验和比较.结果表明,优化后的双圆周阵列,具有最大的实际空间截止频率和实际等效口径.