Integrated strong cation exchange/capillary reversed-phase liquid chromatography/on-target digestion coupled with mass spectrometry for identification of intact human liver tissue proteins

We present a comprehensive method for proteome analysis that integrates both intact protein separation and proteolytic fragment characterization mass spectrometric approaches. Strong cation exchange chromatography (SCX) was used as the first separation dimension and capillary reversed-phase liquid chromatography (cRPLC) was integrated as the second separation dimension. Fractions from SCX were collected offline and loaded onto cRPLC. Effluents from cRPLC were directly deposited onto the MALDI target plates and further digested by using a rapid on-probe tryptic digestion technique. This approach minimizes the amount of time and extensive labor required for traditional in-solution digestion followed by exhaustive sample cleanup and transfer. MALDI-TOF/TOF was used for subsequent analyses. The sensitivity of on-target digestion is showed by analyzing 0.07 ng of myoglobin, 0.07 ng of cytochrome c and 0.7 ng BSA. The high efficiency of the overall system was demonstrated by the analysis of intact proteins extracted from normal human liver tissue. In total, 458 proteins were identified, which proved the system's promising potential for analysis and application in proteomics.     

Large-scale muLC-MS/MS for silver- and Coomassie blue-stained polyacrylamide gels

2-DE combined with LC-MS/MS has become a routine, reliable protein separation and identification technology for proteome analysis. The demand for large-scale protein identifications after 2-DE separation requires a sensitive and high-throughput LC-MS/MS method. In this report, a simple, splitless, fully automated capillary LC-MS/MS system was described for the large-scale identification of proteins from gels stained with either silver or CBB. The gel samples were digested and peptides were extracted using an in-gel digestion workstation. The peptides were automatically introduced into a capillary column by an autosampler connected to an HPLC pump. A nanoLC pump was then used to deliver the gradient and elute the peptides from the capillary column directly into an LCQ IT mass spectrometer. Neither a peptide trapping setting nor a flow split is needed in this simple setup. The collected MS/MS spectra were then automatically searched by SEQUEST, and filtered and organized by DTASelect. Hundreds of silver-stained or CBB-stained Shewanella oneidensis, Geobacter sulfurreducens, and Geobacter metallireducens proteins separated by denaturing or nondenaturing 2-DE were digested and routinely analyzed using this fully automated muLC-MS/MS system. High peptide hits and sequence coverage were achieved for most CBB-stained gel spots. About 75% of the spots were found to contain multiple proteins. Although silver staining is not commonly thought to be optimal for MS analysis, protein identifications were successfully obtained from silver-stained 2-DE spots detected using methods with and without formaldehyde for protein fixation.     

Combining capillary electrophoresis with mass spectrometry for applications in proteomics

Mass spectrometry (MS)-based proteomics is currently dominated by the analysis of peptides originating either from digestion of proteins separated by two-dimensional gel electrophoresis (2-DE) or from global digestion; the simple peptide mixtures obtained from digestion of gel-separated proteins do not usually require further separation, while the complex peptide mixtures obtained by global digestion are most frequently separated by chromatographic techniques. Capillary electrophoresis (CE) provides alternatives to 2-DE for protein separation and alternatives to chromatography for peptide separation. This review attempts to elucidate how the most promising CE modes, capillary zone electrophoresis (CZE) and capillary isoelectric focusing (CIEF), might best be applied to MS-based proteomics. CE-MS interfacing, mass analyzer performance, column coating to minimize analyte adsorption, and sample stacking for CZE are considered prior to examining numerous applications. Finally, multidimensional systems that incorporate CE techniques are examined; CZE often finds use as a fast, final dimension before ionization for MS, while CIEF, being an equilibrium technique, is well-suited to being the first dimension in automated fractionation systems.     

Miniaturized on-line proteolysis-capillary liquid chromatography-mass spectrometry for peptide mapping of lactate dehydrogenase

In this study, methodology was developed for on-line and miniaturized enzymatic digestion with liquid chromatographic (LC) separation and mass spectrometric (MS) detection. A packed capillary LC-MS system was combined with on-line trypsin cleavage of a model protein, lactate dehydrogenase, to provide an efficient system for peptide mapping. The protein was injected onto an enzymatic capillary reactor and the resulting peptides were efficiently trapped on a capillary trapping column. Different trapping columns were evaluated to achieve a high binding capacity for the peptides generated in the enzyme reactor. The peptides were further eluted from the pre-column and separated on an analytical capillary column by a buffer more suitable for the following an electrospray ionisation (ESI) MS process. An important aspect of the on-line approach was the desalting of peptides performed in the trapping column to avoid detrimental signal suppression in the ESI process. The developed on-line system was finally compared to a classical digestion in solution, with reference to peptide sequence coverage and sensitivity. It was shown that the on-line system gave more than 100% higher peptide sequence coverage than traditional digestion methods.     

A flow injection-capillary electrophoresis system with high-voltage contactless conductivity detection for automated dual opposite end injection

The system comprises two flow injection-capillary electrophoresis interfaces into which the opposite ends of the separation capillary are inserted. The electrolyte solution flows through both interfaces by use of hydrostatic pressure. The injection of the samples into the electrolyte flow is accomplished by a rotary-type chromatographic valve at the grounded side and by a pinch-valve injector at the high-voltage side that provides sufficient isolation from the high electric field. The system allows a fully automated dual-injection sequence of samples from both capillary ends and simultaneous electrophoretic separation of anions and cations in the samples. The analytes are detected by a high-voltage contactless conductometric detector positioned approximately in the middle of the separation capillary. The parameters of the system were evaluated. The repeatability of the flow injection-capillary electrophoresis system for the simultaneous determination of anions and cations was evaluated for ten consecutive injections and relative standard deviation (RSD) values for peak areas were better than 1.0%. The sample throughput for total ionic analysis was estimated to be 25 samples per hour. The system was used for automated simultaneous analysis of anions and cations in various real samples. Using a short separation capillary, rapid total ionic analysis in less then 1 min is demonstrated.     

Rapid electrophoretic separations in short capillaries using contactless conductivity detection and a sequential injection analysis manifold for hydrodynamic sample loading

A sequential injection-capillary electrophoresis (SI-CE) system for the fast and automated quantitative analysis of anions and cations is described. Because of the low sample load in capillary electrophoresis a split injection approach had to be used to achieve reliable hydrodynamic injection. The use of a capillary of 8 cm effective length allowed for the separation of five inorganic cations within 11 s. One common electrolyte solution containing 12 mM l-histidine and 2 mM 18-crown-6 whose pH value was adjusted to 4.0 with 10% v/v acetic acid was used for anions and cations, thus the analysis of both groups of analytes could be carried out in rapid sequence simply by switching the polarity of the high voltage supply. The system also allows automated flushing of the capillary. Detection limits between about 2 and 5 micromol l(-1) could be achieved with the contactless conductivity detector employed.     

Integration of immobilized trypsin bead beds for protein digestion within a microfluidic chip incorporating capillary electrophoresis separations and an electrospray mass spectrometry interface

A microfluidic device is described in which an electrospray interface to a mass spectrometer is integrated with a capillary electrophoresis channel, an injector and a protein digestion bed on a monolithic substrate. A large channel, 800 microm wide, 150 microm deep and 15 mm long, was created to act as a reactor bed for trypsin immobilized on 40-60 microm diameter beads. Separation was performed in channels etched 10 microm deep, 30 microm wide and about 45 mm long, feeding into a capillary, attached to the chip with a low dead volume coupling, that was 30 mm in length, with a 50 microm i.d. and 180 microm o.d. Sample was pumped through the reactor bed at flow rates between 0.5 and 60 microL/min. The application of this device for rapid digestion, separation and identification of proteins is demonstrated for melittin, cytochrome c and bovine serum albumin (BSA). The rate and efficiency of digestion was related to the flow rate of the substrate solution through the reactor bed. A flow rate of 1 or 0.5 microL/min was found adequate for complete consumption of cytochrome c or BSA, corresponding to a digestion time of 3-6 min at room temperature. Coverage of the amino acid sequence ranged from 92% for cytochrome c to 71% for BSA, with some missed cleavages observed. Melittin was consumed within 5 s. In contrast, a similar extent of digestion of melittin in a cuvet took 10-15 min. The kinetic limitations associated with the rapid digestion of low picomole levels of substrate were minimized using an integrated digestion bed with hydrodynamic flow to provide an increased ratio of trypsin to sample. This chip design thus provides a convenient platform for automated sample processing in proteomics applications.     

Automation of nanoflow liquid chromatography-tandem mass spectrometry for proteome and peptide profiling analysis by using a monolithic analytical capillary column

An automated nano-LC-MS/MS platform without trap column was established, which only used a 20 cm lauryl methacrylate-ethylene dimethacrylate (LMA-EDMA) monolithic capillary column to allow preconcentration and separation of peptides. The monolithic column had the advantages of good permeability and low backpressure resulting in higher flow rates for capillary columns. Tryptic digests of bovine albumin and yeast protein extract were tested using the monolithic column system. High proteomic coverage using this approach were demonstrated in this study. Furthermore, peptide samples extracted from mouse liver were separated by using the monolithic column system combined with size-exclusion chromatography prefractionation. This monolithic column system might be a promising alternative for the automated system previously using a trap column for routine proteome and peptide profiling analysis.     

Applications of an automated apparatus for two-dimensional electrophoresis, Model TEP-1, for microsequence analyses of proteins.

Two-dimensional electrophoresis has become a rapid and powerful separation method for the preparation of samples for sequence analysis depending on the development of automated microsequencers accompanied by a blotting technique. We have constructed an automated apparatus for two-dimensional electrophoresis, Model TEP-1, which allows precise analytical runs under computer-control with a fully automated transfer from the first- to the second-dimensional gel. In the present paper we describe several applications of TEP-1 followed by blotting and sequencing to reveal the primary structure of proteins in a complex mixture. Several known and unknown proteins were analyzed. Enzymatic digests of proteins could be directly applied onto the TEP-1, in which a gel of lower molecular weight proteins was used as the second dimension. Subsequent blotting and sequencing provided internal sequence information. The use of TEP-1, followed by blotting, provides spots containing ca. 10-100 pmol protein. These figures permitted the identification of 10-40 amino acid residues from the N-terminus. The TEP-1 provides a simple and rapid separation of complex mixtures obtained from natural sources and chemical, biological or genetic products.     

On-line coupling of micro-enzyme reactor with micro-membrane chromatography for protein digestion, peptide separation, and protein identification using electrospray ionization mass spectrometry

To miniaturize high-performance membrane chromatography, a poly(vinylidene fluoride) membrane medium, employed as the stationary phase, is sandwiched between two poly(dimethylsiloxane) substrates containing the microchannels. The microchannels are fabricated by the capillary molding technique, involving the use of capillaries as the channel template and the fluid inlet/outlet. The micro(micro)-membrane chromatography system is coupled with a micro-enzyme reactor containing immobilized trypsins for performing rapid protein digestion, peptide separation, and protein identification using electrospray ionization mass spectrometry. Separation performance of cytochrome c digest in micro-membrane chromatography is compared with the results obtained from a regular reversed-phase micro-liquid chromatography. The efficacy and the potentials of micro-membrane chromatography in tryptic mapping are reported. On-line integration of the micro-enzyme reactor with micro-chromatographic separation techniques and electrospray ionization mass spectrometry clearly provides a microanalytical platform for automated sample handling, minimized sample loss, and reduced sample consumption. It also provides enhanced detection sensitivity and dynamic range for the analysis of complex protein mixtures such as cell lysates in proteomics research.     

A replaceable microreactor for on-line protein digestion in a two-dimensional capillary electrophoresis system with tandem mass spectrometry detection

We describe a two-dimensional capillary electrophoresis system that incorporates a replaceable enzymatic microreactor for on-line protein digestion. In this system, trypsin is immobilized on magnetic beads. At the start of each experiment, old beads are flushed to waste and replaced with a fresh plug of beads, which is captured by a pair of magnets at the distal tip of the first capillary. For analysis, proteins are separated in the first capillary. A fraction is then parked in the reactor to create peptides. Digested peptides are periodically transferred to the second capillary for separation; a fresh protein fraction is simultaneously moved to the reactor for digestion. An electrospray interface is used to introduce peptides into a mass spectrometer for analysis. This procedure is repeated for several dozen fractions under computer control. The system was demonstrated by the separation and digestion of insulin chain b oxidized and β-casein as model proteins.     

Comparison of automated in-gel digest methods for femtomole level samples

A comparison of automated in-gel digestion methods for low picomolar to femtomolar levels of protein is presented. Gel spots with 4 pmol to 120 fmol of protein were stained with either Coomassie colloidal blue or SYPRO Ruby and digested using an automated platform. The sequence coverages and average peak intensities obtained from a matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) analysis are compared. Results show that methods using an acetonitrile extraction or digest times greater than the standard 4 h give no significant increase in peptide sequence coverage for automated digestion of low protein level samples. It is also shown that digests from SYPRO Ruby-stained gels show a greater improvement upon ZipTip cleanup than digests from Coomassie colloidal blue-stained gels. The digests from SYPRO Ruby-stained gels are also shown to give a higher average peptide intensity if a method with minimal gel plug washing is used.     

Automated nanoflow liquid chromatography-tandem mass spectrometry for a differential display proteomic study on Xenopus laevis neuroendocrine cells

Many proteomic projects based on a comparison of protein profiles displayed on two-dimensional polyacrylamide gel electrophoresis rely on the identification of these proteins using peptide mass fingerprinting on a matrix-assisted laser desorption/ionization mass spectrometer after tryptic digestion. However, this approach is limited to an organism of which genomic information is largely available, i.e. when the total genome sequence is known. For other organisms, mass spectrometric sequence analysis is necessary for protein identification. We established a nano-LC-MS-MS system based on a quadrupole time-of-flight mass spectrometer, which allows automated sequence analysis of tryptic digestion mixtures from single gel spots. This system is applied in a differential-display proteomic study to identify differentially expressed proteins in the neuroendocrine cells of the neurointermediate pituitary of black- and white-background adapted Xenopus laevis.     

High-throughput genotyping of factor V Leiden mutation by ultrathin-layer agarose gel electrophoresis.

Ultrathin-layer agarose gel electrophoresis is a novel combination of the established methodologies of slab gel electrophoresis and capillary gel electrophoresis. This new format provides a multilane separation platform with rapid analysis time and excellent sensitivity by using laser-induced fluorescence scanning detection system. Sample injection onto the ultrathin-layer separation platform is easily accomplished by membrane mediated loading technology. In this paper, we demonstrate the sensitivity and high-throughput fashion of this novel separation and detection system for rapid genotyping of the coagulation factor V Leiden mutation by polymerase chain reaction (PCR)-restriction fragment length polymorphism (RFLP) analysis. The PCR amplified fragment from exon 10 of the factor V gene was digested by the Mnl I restriction enzyme, followed by automated ultrathin-layer agarose gel electrophoresis analysis with "in migratio" fluorescent labeling during the separation process. Due to its speed and automation, this method should be considered for large scale screening of factor V Leiden mutation.     

Characterization of a biopharmaceutical protein and evaluation of its purification process using automated capillary Western blot

This paper describes the application of an automated size‐based capillary Western blot system (Sally instrument) from ProteinSimple, Inc., for biopharmaceutical fusion‐Fc protein characterization and evaluation of its purification process. The fusion‐Fc protein column purification from an excess of single chain Fc polypeptide and removal of an enzyme coexpressed for protein maturation have been demonstrated using an automated capillary Western system. The clearance of a selected host cell protein (HCP) present in cell culture of fusion‐Fc protein was also quantitatively monitored throughout the protein purification process. Additionally, the low levels of fusion‐Fc product‐related impurities detected by traditional slab gel Western blot were confirmed by the automated capillary Western system. Compared to the manual approach, the automated capillary Western blot provides the advantages of ease of operation, higher sample throughput, greater linearity range, and higher precision for protein quantitation.     

Characterization of femtomole levels of proteins in solution using rapid proteolysis and nanoelectrospray ionization mass spectrometry

A method for the rapid proteolytic digestion of low picomole to low femtomole amounts of proteins in solution using a capillary immobilized protease column is presented. Dilute protein samples are passed through a “μ-digestion” column packed with Poroszyme^? immobilized trypsin for generation of proteolytic fragments in less than 10 min. After digestion, nanoelectrospray ionization mass spectrometry (NanoES) is used to generate a peptide map, and peptides of interest are subjected to MS/MS from the same sample. By digesting only 100 fmol of the protein src kinase and 30 fmol of the protein lck kinase with a tryptic μ-digestion column, we obtained sufficient data from NanoES-MS and MS/MS to unambiguously identify both proteins using database searching. This approach was also used to locate a phosphorylation site on lck kinase starting with only 300 fmol of protein. The method was successfully used to identify an E. coli cold shock protein in a fraction collected from a two-dimensional HPLC separation of an E. coli cell lysate. The μ-digestion column was found to be less susceptible to adsorptive losses than solution digests, thus allowing for digestion and enhanced recovery of peptides from even low fmol amounts of protein in solution.     

Analysis of cationic nutrients from foods by ion chromatography

This paper describes the feasibility of combining two relatively new technologies to generate data on the cationic nutrient content of foods. Single column ion chromatography was used to monitor several analytes following the use of a microwave digestion scheme aimed at rapid, multiple sample digestion. The result is a more streamline and productive approach to multi-sample preparation and multi-analyte determination when investigating the cation content of foods.

Linearity and limits of detection for the chromatographic procedure were established. Sample size as well as digestion acid type and amount were investigated during the microwave process. The method was applied to a variety of food matrices to evaluate its scope. Results generated with this method compare favorably to those from atomic absorption.

Finally, capillary ion electrophoresis (Waters' trade name: Capillary Ion Analysis), a subset of capillary electrophoresis which has been optimized for ion analysis, was applied to the sample digest to investigate the usefulness of this technology to the analysis of mono-/divalent cations from foods.     

Protein- versus peptide fractionation in the first dimension of two-dimensional high-performance liquid chromatography-matrix-assisted laser desorption/ionization tandem mass spectrometry for qualitative proteome analysis of tissue samples

The availability of robust and highly efficient separation methods represents a major requirement for proteome analysis. This study investigated the characteristics of two different gel-free proteomic approaches to the fractionation of proteolytic peptides and intact proteins, respectively, in a first separation dimension. Separation and mass spectrometric detection by matrix-assisted laser desorption/ionization tandem mass spectrometry (MALDI-MS/MS) were performed at the peptide level in both methods. Bottom-up analysis (BU) was carried out employing well established peptide fractionation in the first separation dimension by strong cation-exchange chromatography (SCX), followed by ion-pair reversed-phase chromatography (IP-RPC) in the second dimension. In the semi-top-down approach (STD), which involved intact protein fractionation in the first dimension, the separation mode in both dimensions was IP-RPC utilizing monolithic columns. Application of the two approaches to the proteome analysis of proteins extracted from a tumor tissue revealed that the BU method identified more proteins (1245 in BU versus 920 in STD) while STD analysis offered higher sequence coverage (14.8% in BU versus 17.5% in STD on average). The identification of more basic and larger proteins was slightly favored in the BU approach, most probably due to higher losses of these proteins during intact protein handling and separation in the STD method. A significant degree of complementarity was revealed by an approximately 33% overlap between one BU and STD replicate, while 33% each of the protein identifications were unique to both methods. In the STD method, peptides obtained upon digestion of the proteins contained in fractions of the first separation dimension covered a broad elution window in the second-dimension separation, which demonstrates a high degree of “pseudo-orthogonality” of protein and peptide separation by IP-RPC in both separation dimensions.     

Ultrathin-layer gel electrophoresis of biopolymers

Emerging need for large-scale, high-resolution analysis of biopolymers, such as DNA sequencing polymerase chain reaction, (PCR) product sizing, single nucleotide polymorphism (SNP) hunting and analysis of protein molecules necessitated the development of automated and high-throughput gel electrophoresis based methods enabling rapid, high-performance separations in a wide molecular weight range. Scaling down electric field mediated separation processes supports higher throughput due to the applicability of higher voltages, thus speeding up analysis time. Indeed, efforts in miniaturization resulted in faster, easier, less costly and more convenient analyses, fulfilling the needs of the emerging biotechnology industry for microscale and massively parallel assays. The two primary approaches in miniaturizing electrophoresis dimensions are the capillary and microslab formats. This latter one evolved towards ultrathin-layer gel electrophoresis which is, except from the thickness of the separation platform, slightly in the upper side of the scale, resulting in considerably easier handling. Ultrathin-layer gel electrophoresis combines the advantages of conventional slab-gel electrophoresis (multilane format) and capillary gel electrophoresis (rapid, high-efficiency separations). It is readily automated, automatic versions of it have been extensively used for large-scale DNA sequencing in the Human Genome Project and more recently became popular in high throughput DNA fragment analysis. Ultrathin-layer techniques are the first step towards the wider use of electrophoresis microchips in perfecting a user-friendly interface between the user and the microdevice.