Group 9 Chalcogenometalates

The compounds [K(18-crown-6)](3)[Ir(Se(4))(3)] (1), [K(2.2.2-cryptand)](3)[Ir(Se(4))(3)].C(6)H(5)CH(3) (2), and [K(18-crown-6)(DMF)(2)][Ir(NCCH(3))(2)(Se(4))(2)] (3) (DMF = dimethylformamide) have been prepared from the reaction of [Ir(NCCH(3))(2)(COE)(2)][BF(4)] (COE = cyclooctene) with polyselenide anions in acetonitrile/DMF. Analogous reactions utilizing [Rh(NCCH(3))(2)(COE)(2)][BF(4)] as a Rh source produce homologues of the Ir complexes; these have been characterized by (77)Se NMR spectroscopy. [NH(4)](3)[Ir(S(6))(3)].H(2)O.0.5CH(3)CH(2)OH (4) has been synthesized from the reaction of IrCl(3).nH(2)O with aqueous (NH(4))(2)S(m)(). In the structure of [K(18-crown-6)](3)[Ir(Se(4))(3)] (1) the Ir(III) center is chelated by three Se(4)(2)(-) ligands to form a distorted octahedral anion. The structure contains a disordered racemate of the Deltalambdalambdalambda and Lambdadeltadeltadelta conformers. The K(+) cations are pulled out of the planes of the crowns and interact with Se atoms of the [Ir(Se(4))(3)](3)(-) anion. [K(2.2.2-cryptand)](3)[Ir(Se(4))(3)].C(6)H(5)CH(3) (2) possesses no short K.Se interactions; here the [Ir(Se(4))(3)](3)(-) anion crystallizes as the Deltalambdalambdadelta/Lambdadeltadeltalambda racemate. In the crystal structure of [K(18-crown-6)(DMF)(2)][Ir(NCCH(3))(2)(Se(4))(2)] (3), the K(+) cation is coordinated by an 18-crown-6 ligand and two DMF molecules and the anion comprises an octahedral Ir(III) center bound by two chelating Se(4)(2)(-) chains and two trans acetonitrile groups. The [Ir(Se(4))(3)](3)(-) and [Rh(Se(4))(3)](3)(-) anions undergo conformational transformations as a function of temperature, as observed by (77)Se NMR spectroscopy. The thermodynamics of these transformations are: [Ir(Se(4))(3)](3)(-), DeltaH = 2.5(5) kcal mol(-)(1), DeltaS = 11.5(2.2) eu; [Rh(Se(4))(3)](3)(-), DeltaH = 5.2(7) kcal mol(-)(1), DeltaS = 24.7(3.0) eu.     

Temperature-dependent coordination of phosphine to five-coordinate alkenylruthenium complexes

The red, five-coordinate complexes Ru(CO)Cl(PPh(3))2(CH=CHPh) and [Ru(CO)Cl(PPh(3))2]2(mu-CH=CHC(6)H(4)CH=CH) undergo reversible coordination of PPh(3) at low temperature to produce the pale yellow, six-coordinate complexes Ru(CO)Cl(PPh(3))3(CH=CHPh) and [Ru(CO)Cl(PPh(3))3]2(mu-CH=CHC(6)H(4)CH=CH). X-ray crystal structures of the latter complex and of the hydride complex RuH(CO)Cl(PPh(3))3 were obtained. 1H and 31P NMR spectra between 20 and -70 degrees C exhibit large changes in both equilibrium constants and dynamic effects. Thermodynamic parameters, DeltaH = -17.5 +/- 2.0 kcal/mol and DeltaS = -57.5 +/- 7.6 eu, were obtained for PPh(3) coordination to the monoruthenium complex, and activation parameters, DeltaH = 20.6 +/- 0.7 kcal/mol and DeltaS = 41.6 +/- 2.0 eu, were obtained for the reverse decoordination. Coordination of PPh(3) was not observed upon cooling of the shorter bridged complex, [Ru(CO)Cl(PPh(3))2]2(mu-CH=CHCH=CH).     

Reductive elimination/oxidative addition of carbon-hydrogen bonds at Pt(IV)/Pt(II) centers: mechanistic studies of the solution thermolyses of Tp(Me2)Pt(CH3)2H

Reductive elimination of methane occurs upon solution thermolysis of kappa(3)-Tp(Me)2Pt(IV)(CH(3))(2)H (1, Tp(Me)2 = hydridotris(3,5-dimethylpyrazolyl)borate). The platinum product of this reaction is determined by the solvent. C-D bond activation occurs after methane elimination in benzene-d(6), to yield kappa(3)-Tp(Me)2Pt(IV)(CH(3))(C(6)D(5))D (2-d(6)), which undergoes a second reductive elimination/oxidative addition reaction to yield isotopically labeled methane and kappa(3)-Tp(Me)2Pt(IV)(C(6)D(5))(2)D (3-d(11)). In contrast, kappa(2)-Tp(Me)2Pt(II)(CH(3))(NCCD(3)) (4) was obtained in the presence of acetonitrile-d(3), after elimination of methane from 1. Reductive elimination of methane from these Pt(IV) complexes follows first-order kinetics, and the observed reaction rates are nearly independent of solvent. Virtually identical activation parameters (DeltaH(++)(obs) = 35.0 +/- 1.1 kcal/mol, DeltaS(++)(obs) = 13 +/- 3 eu) were measured for the reductive elimination of methane from 1 in both benzene-d(6) and toluene-d(8). A lower energy process (DeltaH(++)(scr) = 26 +/- 1 kcal/mol, DeltaS(++)(scr) = 1 +/- 4 eu) scrambles hydrogen atoms of 1 between the methyl and hydride positions, as confirmed by monitoring the equilibration of kappa(3)-Tp(Me)()2Pt(IV)(CH(3))(2)D (1-d(1)()) with its scrambled isotopomer, kappa(3)-Tp(Me)2Pt(IV)(CH(3))(CH(2)D)H (1-d(1'). The sigma-methane complex kappa(2)-Tp(Me)2Pt(II)(CH(3))(CH(4)) is proposed as a common intermediate in both the scrambling and reductive elimination processes. Kinetic results are consistent with rate-determining dissociative loss of methane from this intermediate to produce the coordinatively unsaturated intermediate [Tp(Me)2Pt(II)(CH(3))], which reacts rapidly with solvent. The difference in activation enthalpies for the H/D scrambling and C-H reductive elimination provides a lower limit for the binding enthalpy of methane to [Tp(Me)2Pt(II)(CH(3))] of 9 +/- 2 kcal/mol.     

Structure and reactivity of bis(silyl) dihydride complexes (PMe(3))(3)Ru(SiR(3))(2)(H)(2): model compounds and real intermediates in a dehydrogenative C-Si bond forming reaction

A series of stable complexes, (PMe(3))(3)Ru(SiR(3))(2)(H)(2) ((SiR(3))(2) = (SiH(2)Ph)(2), 3a; (SiHPh(2))(2), 3b; (SiMe(2)CH(2)CH(2)SiMe(2)), 3c), has been synthesized by the reaction of hydridosilanes with (PMe(3))(3)Ru(SiMe(3))H(3) or (PMe(3))(4)Ru(SiMe(3))H. Compounds 3a and 3c adopt overall pentagonal bipyramidal geometries in solution and the solid state, with phosphine and silyl ligands defining trigonal bipyramids and ruthenium hydrides arranged in the equatorial plane. Compound 3a exhibits meridional phosphines, with both silyl ligands equatorial, whereas the constraints of the chelate in 3c result in both axial and equatorial silyl environments and facial phosphines. Although there is no evidence for agostic Si-H interactions in 3a and 3b, the equatorial silyl group in 3c is in close contact with one hydride (1.81(4) A) and is moderately close to the other hydride (2.15(3) A) in the solid state and solution (nu(Ru.H.Si) = 1740 cm(-)(1) and nu(RuH) = 1940 cm(-)(1)). The analogous bis(silyl) dihydride, (PMe(3))(3)Ru(SiMe(3))(2)(H)(2) (3d), is not stable at room temperature, but can be generated in situ at low temperature from the 16e(-) complex (PMe(3))(3)Ru(SiMe(3))H (1) and HSiMe(3). Complexes 3b and 3d have been characterized by multinuclear, variable temperature NMR and appear to be isostructural with 3a. All four complexes exhibit dynamic NMR spectra, but the slow exchange limit could not be observed for 3c. Treatment of 1 with HSiMe(3) at room temperature leads to formation of (PMe(3))(3)Ru(SiMe(2)CH(2)SiMe(3))H(3) (4b) via a CH functionalization process critical to catalytic dehydrocoupling of HSiMe(3) at higher temperatures. Closer inspection of this reaction between -110 and -10 degrees C by NMR reveals a plethora of silyl hydride phosphine complexes formed by ligand redistribution prior to CH activation. Above ca. 0 degrees C this mixture converts cleanly via silane dehydrogenation to the very stable tris(phosphine) trihydride carbosilyl complex 4b. The structure of 4b was determined crystallographically and exhibits a tetrahedral P(3)Si environment around the metal with the three hydrides adjacent to silicon and capping the P(2)Si faces. Although strong Si.HRu interactions are not indicated in the structure or by IR, the HSi distances (2.00(4) - 2.09(4) A) and average coupling constant (J(SiH) = 25 Hz) suggest some degree of nonclassical SiH bonding in the RuH(3)Si moiety. The least hindered complex, 3a, reacts with carbon monoxide principally via an H(2) elimination pathway to yield mer-(PMe(3))(3)(CO)Ru(SiH(2)Ph)(2), with SiH elimination as a minor process. However, only SiH elimination and formation of (PMe(3))(3)(CO)Ru(SiR(3))H is observed for 3b-d. The most hindered bis(silyl) complex, 3d, is extremely labile and even in the absence of CO undergoes SiH reductive elimination to generate the 16e(-) species 1 (DeltaH(SiH)(-)(elim) = 11.0 +/- 0.6 kcal x mol(-)(1) and DeltaS(SiH)(-)(elim) = 40 +/- 2 cal x mol(-)(1) x K(-)(1); Delta = 9.2 +/- 0.8 kcal x mol(-)(1) and Delta = 9 +/- 3 cal x mol(-)(1).K(-)(1)). The minimum barrier for the H(2) reductive elimination can be estimated, and is higher than that for silane elimination at temperatures above ca. -50 degrees C. The thermodynamic preferences for oxidative additions to 1 are dominated by entropy contributions and steric effects. Addition of H(2) is by far most favorable, whereas the relative aptitudes for intramolecular silyl CH activation and intermolecular SiH addition are strongly dependent on temperature (DeltaH(SiH)(-)(add) = -11.0 +/- 0.6 kcal x mol(-)(1) and DeltaS(SiH)(-)(add) = -40 +/- 2 cal.mol(-)(1) x K(-)(1); DeltaH(beta)(-CH)(-)(add) = -2.7 +/- 0.3 kcal x mol(-)(1) and DeltaS(beta)(-CH)(-)(add) = -6 +/- 1 cal x mol(-)(1) x K(-)(1)). Kinetic preferences for oxidative additions to 1 - intermolecular SiH and intramolecular CH - have been also quantified: Delta = -1.8 +/- 0.8 kcal x mol(-)(1) and Delta = -31 +/- 3 cal x mol(-)(1).K(-)(1); Delta = 16.4 +/- 0.6 kcal x mol(-)(1) and Delta = -13 +/- 6 cal x mol(-)(1).K(-)(1). The relative enthalpies of activation (-)(1) x K(-)(1)). Kinetic preferences for oxidative additions to 1 - intermolecular SiH and intramolecular CH - have been also quantified: Delta (H)SiH(add) = 1.8 +/- 0.8 kcal x mol(-)(1) and Delta S((SiH-add) =31+/- 3 cal x mol(-)(1) x K(-)(1); Delta S (SiH -add) = 16.4 +/- 0.6 kcal x mol(-)(1) and =Delta S (SiH -CH -add) =13+/- 6 cal x mol(-)(1) x K(-)(1). The relative enthalpies of activation are interpreted in terms of strong SiH sigma-complex formation - and much weaker CH coordination - in the transition state for oxidative addition.     

Influence of terpyridine as pi-acceptor ligand on the kinetics and mechanism of the reaction of NO with ruthenium(III) complexes

The kinetics of the unusually fast reaction of cis- and trans-[Ru(terpy)(NH3)2Cl]2+ (with respect to NH3; terpy=2,2':6',2"-terpyridine) with NO was studied in acidic aqueous solution. The multistep reaction pathway observed for both isomers includes a rapid and reversible formation of an intermediate Ru(III)-NO complex in the first reaction step, for which the rate and activation parameters are in good agreement with an associative substitution behavior of the Ru(III) center (cis isomer, k1=618 +/- 2 M(-1) s(-1), DeltaH(++) = 38 +/- 3 kJ mol(-1), DeltaS(++) = -63 +/- 8 J K(-1) mol(-1), DeltaV(++) = -17.5 +/- 0.8 cm3 mol(-1); k -1 = 0.097 +/- 0.001 s(-1), DeltaH(++) = 27 +/- 8 kJ mol(-1), DeltaS(++) = -173 +/- 28 J K(-1) mol(-1), DeltaV(++) = -17.6 +/- 0.5 cm3 mol(-1); trans isomer, k1 = 1637 +/- 11 M(-1) s(-1), DeltaH(++) = 34 +/- 3 kJ mol(-1), DeltaS(++) = -69 +/-11 J K(-1) mol(-1), DeltaV(++) = -20 +/- 2 cm3 mol(-1); k(-1)=0.47 +/- 0.08 s(-1), DeltaH(++)=39 +/- 5 kJ mol(-1), DeltaS(++) = -121 +/-18 J K(-1) mol(-1), DeltaV(++) = -18.5 +/- 0.4 cm3 mol(-1) at 25 degrees C). The subsequent electron transfer step to form Ru(II)-NO+ occurs spontaneously for the trans isomer, followed by a slow nitrosyl to nitrite conversion, whereas for the cis isomer the reduction of the Ru(III) center is induced by the coordination of an additional NO molecule (cis isomer, k2=51.3 +/- 0.3 M(-1) s(-1), DeltaH(++) = 46 +/- 2 kJ mol(-1), DeltaS(++) = -69 +/- 5 J K(-1) mol(-1), DeltaV(++) = -22.6 +/- 0.2 cm3 mol(-1) at 45 degrees C). The final reaction step involves a slow aquation process for both isomers, which is interpreted in terms of a dissociative substitution mechanism (cis isomer, DeltaV(++) = +23.5 +/- 1.2 cm3 mol(-1); trans isomer, DeltaV(++) = +20.9 +/- 0.4 cm3 mol(-1) at 55 degrees C) that produces two different reaction products, viz. [Ru(terpy)(NH3)(H2O)NO]3+ (product of the cis isomer) and trans-[Ru(terpy)(NH3)2(H2O)]2+. The pi-acceptor properties of the tridentate N-donor chelate (terpy) predominantly control the overall reaction pattern.     

Effects of protonation of alkyldimethylamine oxides on the dissolution temperature in aqueous media

The effects of protonation (ionization) of hexadecyldimethylamine oxides on the dissolution temperature in aqueous media were investigated by differential scanning calorimetry. Only one endothermic peak was reproducibly observed at all the degrees of ionization alpha examined that were assigned to the transition from the solid (the gel phase) to the solution containing micelles. The dissolution temperature versus alpha curves showed a maximum at alpha=0.5, strongly suggesting the formation of a stable complex of 1-to-1 composition of the nonionic and cationic species through the proposed hydrogen bond. From the shape of the dissolution curve as well as the composition analysis of the solid phase, the solid solution was found to be formed over all alpha values. Effects of alkylchain length on the dissolution temperature for a homologous series of octadecyl- (C18DAO), hexadecyl- (C16DAO), and tetradecyldimethylamine oxide (C14DAO) were also examined for alpha=0.5 and alpha=1. Both the transition temperature and the associated thermodynamic quantities DeltaH and DeltaS increased systematically with the chain length, but for alpha=0.5 smaller increases in DeltaH and DeltaS values with the chain length were observed [DeltaH/CH2 (kJ mol(-1))=7.2+/-0.2 and 2.2+/-0.5 for alpha=1 and alpha=0.5, respectively, and DeltaS/CH2 (J mol(-1) K(-1))=21.9+/-1.8 for alpha=1 and 4.6+/-1.9 for alpha=0.5]. By annealing procedures, the metastable nature of the gel phase was demonstrated for the C16DAO (alpha=1) solid.     

The first example of a nitrile hydratase model complex that reversibly binds nitriles

Nitrile hydratase (NHase) is an iron-containing metalloenzyme that converts nitriles to amides. The mechanism by which this biochemical reaction occurs is unknown. One mechanism that has been proposed involves nucleophilic attack of an Fe-bound nitrile by water (or hydroxide). Reported herein is a five-coordinate model compound ([Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+)) containing Fe(III) in an environment resembling that of NHase, which reversibly binds a variety of nitriles, alcohols, amines, and thiocyanate. XAS shows that five-coordinate [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) reacts with both methanol and acetonitrile to afford a six-coordinate solvent-bound complex. Competitive binding studies demonstrate that MeCN preferentially binds over ROH, suggesting that nitriles would be capable of displacing the H(2)O coordinated to the iron site of NHase. Thermodynamic parameters were determined for acetonitrile (DeltaH = -6.2(+/-0.2) kcal/mol, DeltaS = -29.4(+/-0.8) eu), benzonitrile (-4.2(+/-0.6) kcal/mol, DeltaS = -18(+/-3) eu), and pyridine (DeltaH = -8(+/-1) kcal/mol, DeltaS = -41(+/-6) eu) binding to [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) using variable-temperature electronic absorption spectroscopy. Ligand exchange kinetics were examined for acetonitrile, iso-propylnitrile, benzonitrile, and 4-tert-butylpyridine using (13)C NMR line-broadening analysis, at a variety of temperatures. Activation parameters for ligand exchange were determined to be DeltaH(+ +) = 7.1(+/-0.8) kcal/mol, DeltaS(+ +) = -10(+/-1) eu (acetonitrile), DeltaH(+ +) = 5.4(+/-0.6) kcal/mol, DeltaS(+ +) = -17(+/-2) eu (iso-propionitrile), DeltaH(+ +) = 4.9(+/-0.8) kcal/mol, DeltaS(+ +) = -20(+/-3) eu (benzonitrile), and DeltaH(+ +) = 4.7(+/-1.4) kcal/mol DeltaS(+ +) = -18(+/-2) eu (4-tert-butylpyridine). The thermodynamic parameters for pyridine binding to a related complex, [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) (DeltaH = -5.9(+/-0.8) kcal/mol, DeltaS = -24(+/-3) eu), are also reported, as well as kinetic parameters for 4-tert-butylpyridine exchange (DeltaH(+ +) = 3.1(+/-0.8) kcal/mol, DeltaS(+ +) = -25(+/-3) eu). These data show for the first time that, when it is contained in a ligand environment similar to that of NHase, Fe(III) is capable of forming a stable complex with nitriles. Also, the rates of ligand exchange demonstrate that low-spin Fe(III) in this ligand environment is more labile than expected. Furthermore, comparison of [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) and [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) demonstrates how minor distortions induced by ligand constraints can dramatically alter the reactivity of a metal complex.     

Stepwise oxidation of anilines by cis-[RuIV(bpy)2(py)(O)]2+

The net six-electron oxidation of aniline to nitrobenzene or azoxybenzene by cis-[Ru(IV)(bpy)(2)(py)(O)](2+) (bpy is 2,2'-bipyridine; py is pyridine) occurs in a series of discrete stages. In the first, initial two-electron oxidation is followed by competition between oxidative coupling with aniline to give 1,2-diphenylhydrazine and capture by H(2)O to give N-phenylhydroxylamine. The kinetics are first order in aniline and first order in Ru(IV) with k(25.1 degrees C, CH(3)CN) = (2.05 +/- 0.18) x 10(2) M(-1) s(-1) (DeltaH(++) = 5.0 +/- 0.7 kcal/mol; DeltaS(++) = -31 +/- 2 eu). On the basis of competition experiments, k(H)2(O)/k(D)2(O) kinetic isotope effects, and the results of an (18)O labeling study, it is concluded that the initial redox step probably involves proton-coupled two-electron transfer from aniline to cis-[Ru(IV)(bpy)(2)(py)(O)](2+) (Ru(IV)=O(2+)). The product is an intermediate nitrene (PhN) or a protonated nitrene (PhNH(+)) which is captured by water to give PhNHOH or aniline to give PhNHNHPh. In the following stages, PhNHOH, once formed, is rapidly oxidized by Ru(IV)=O(2+) to PhNO and PhNHNHPh to PhN=NPh. The rate laws for these reactions are first order in Ru(IV)=O(2+) and first order in reductant with k(14.4 degrees C, H(2)O/(CH(3))(2)CO) = (4.35 +/- 0.24) x 10(6) M(-1) s(-1) for PhNHOH and k(25.1 degrees C, CH(3)CN) = (1.79 +/- 0.14) x 10(4) M(-1) s(-1) for PhNHNHPh. In the final stages of the six-electron reactions, PhNO is oxidized to PhNO(2) and PhN=NPh to PhN(O)=NPh. The oxidation of PhNO is first order in PhNO and in Ru(IV)=O(2+) with k(25.1 degrees C, CH(3)CN) = 6.32 +/- 0.33 M(-1) s(-1) (DeltaH(++) = 4.6 +/- 0.8 kcal/mol; DeltaS(++) = -39 +/- 3 eu). The reaction occurs by O-atom transfer, as shown by an (18)O labeling study and by the appearance of a nitrobenzene-bound intermediate at low temperature.     

Molecular encapsulation via metal-to-ligand coordination in a Cu(I)-folded molecular basket

A molecular basket, composed of a semirigid C3v symmetric tris-norbornadiene framework and three pyridine flaps at the rim, has been shown to coordinate to a Cu(I) cation and thereby fold in a multivalent fashion. The assembly was effective (Ka = 1.73 +/- 0.08 x 10(5) M(-1)) and driven by enthalpy (DeltaH(o) = -7.2 +/- 0.1 kcal/mol, DeltaS(o) = -0.25 eu). Variable temperature (1)H NMR studies, assisted with 2D COSY and ROESY investigations, revealed the existence of Cu(I)-folded basket 10b with a molecule of acetonitrile occupying its interior and coordinated to the metal. Interestingly, 10b is in equilibrium with Cu(I)-folded 10a , whose inner space is solvated by acetone or chloroform. The incorporation of a molecule of acetonitrile inside 10a was found to be driven by enthalpy (DeltaH(o) = -3.3 +/- 0.1 kcal/mol), with an apparent loss in entropy (DeltaS(o) = -9.4 +/- 0.4 eu); this is congruent with a complete immobilization of acetonitrile and release of a "loosely" encapsulated solvent molecule during 10a/b interconversion. From an Eyring plot, the activation enthalpy for incorporating acetonitrile into 10a was found to be positive (DeltaH(double dagger) = 6.5 +/- 0.5 kcal/mol), while the activation entropy was negative (DeltaS(double dagger) = -20 +/- 2 eu). The results are in agreement with an exchange mechanism whereby acetonitrile "slips" into an "empty" basket through its side aperture. In fact, DFT (BP86) calculations are in favor of such a mechanistic scenario; the calculations suggest that opening of the basket's rim to exchange guests is energetically demanding and therefore less feasible.     

A cadmium hydroxide complex of a N3S-donor ligand containing two hydrogen bond donors: synthesis, characterization, and CO2 reactivity

Treatment of the ebnpa (N-2-(ethylthio)ethyl-N,N-bis((6-neopentylamino-2-pyridyl)methyl)amine) ligand with a molar equivalent amount of Cd(ClO(4))(2).5H(2)O in CH(3)CN followed by the addition of [Me(4)N]OH.5H(2)O yielded the cadmium hydroxide complex [(ebnpaCd)(2)(mu-OH)(2)](ClO(4))(2) (1). Complex 1 has a binuclear cation in the solid-state with secondary hydrogen-bonding and CH/pi interactions involving the ebnpa ligand. In acetonitrile, 1 forms a binuclear/mononuclear equilibrium mixture. The formation of a mononuclear species has been confirmed by conductance measurements of 1 at low concentrations. Variable temperature studies of the binuclear/mononuclear equilibrium provided the standard enthalpy and entropy associated with the formation of the monomer as DeltaH degrees = +31(2) kJ mol(-1) and DeltaS degrees = +108(8) J mol(-1) K(-1), respectively. Enhanced secondary hydrogen-bonding interactions involving the terminal Cd-OH moiety may help to stabilize the mononuclear complex. Treatment of 1 with CO(2) in acetonitrile results in the formation of a binuclear cadmium carbonate complex, [(ebnpaCd)(2)(mu-CO(3))](ClO(4))(2) (2).     

Equilibrium and kinetic studies on the reactions of alkylcobalamins with cyanide

Ligand substitution equilibria of different alkylcobalamins (RCbl, R = Me, CH(2)Br, CH(2)CF(3), CHF(2), CF(3)) with cyanide have been studied. It was found that CN(-) first substitutes the 5,6-dimethylbenzimidazole (Bzm) moiety in the alpha-position, followed by substitution of the alkyl group in the beta-position trans to Bzm. The formation constants K(CN) for the 1:1 cyanide adducts (R(CN)Cbl) were found to be 0.38 +/- 0.03, 0.43 +/- 0.03, and 123 +/- 9 M(-1) for R = Me, CH(2)Br, and CF(3), respectively. In the case of R = CH(2)CF(3), the 1:1 adduct decomposes in the dark with CN(-) to give (CN)(2)Cbl. The unfavorable formation constants for R = Me and CH(2)Br indicate the requirement of very high cyanide concentrations to produce the 1:1 complex, which cause the kinetics of the displacement of Bzm to be too fast to follow kinetically. The kinetics of the displacement of Bzm by CN(-) could be followed for R = CH(2)CF(3) and CF(3) to form CF(3)CH(2)(CN)Cbl and CF(3)(CN)Cbl, respectively, in the rate-determining step. Both reactions show saturation kinetics at high cyanide concentration, and the limiting rate constants are characterized by the activation parameters: R = CH(2)CF(3), DeltaH = 71 +/- 1 kJ mol(-1), DeltaS = -25 +/- 4 J K(-1) mol(-1), and DeltaV = +8.9 +/- 1.0 cm(3) mol(-1); R = CF(3), DeltaH = 77 +/- 3 kJ mol(-1), DeltaS = +44 +/- 11 J K(-1) mol(-1), and DeltaV = +14.8 +/- 0.8 cm(3) mol(-1), respectively. These parameters are interpreted in terms of an I(d) and D mechanism for R = CH(2)CF(3) and CF(3), respectively. The results of the study enable the formulation of a general mechanism that can account for the substitution behavior of all investigated alkylcobalamins including coenzyme B(12).     

Hydroxylation of phenolic compounds by a peroxodicopper(II) complex: further insight into the mechanism of tyrosinase

The dicopper(I) complex [Cu2(MeL66)]2+ (where MeL66 is the hexadentate ligand 3,5-bis-{bis-[2-(1-methyl-1H-benzimidazol-2-yl)-ethyl]-amino}-meth ylbenzene) reacts reversibly with dioxygen at low temperature to form a mu-peroxo adduct. Kinetic studies of O2 binding carried out in acetone in the temperature range from -80 to -55 degrees C yielded the activation parameters DeltaH1(not equal) = 40.4 +/- 2.2 kJ mol(-1), DeltaS1)(not equal) = -41.4 +/- 10.8 J K(-1) mol(-1) and DeltaH(-1)(not equal) = 72.5 +/- 2.4 kJ mol(-1), DeltaS(-1)(not equal) = 46.7 +/- 11.1 J K(-1) mol(-1) for the forward and reverse reaction, respectively, and the binding parameters of O2 DeltaH degrees = -32.2 +/- 2.2 kJ mol(-1) and DeltaS degrees = -88.1 +/- 10.7 J K(-1) mol(-1). The hydroxylation of a series of p-substituted phenolate salts by [Cu2(MeL66)O2]2+ studied in acetone at -55 degrees C indicates that the reaction occurs with an electrophilic aromatic substitution mechanism, with a Hammett constant rho = -1.84. The temperature dependence of the phenol hydroxylation was studied between -84 and -70 degrees C for a range of sodium p-cyanophenolate concentrations. The rate plots were hyperbolic and enabled to derive the activation parameters for the monophenolase reaction DeltaH(not equal)ox = 29.1 +/- 3.0 kJ mol(-1), DeltaS(not equal)ox = -115 +/- 15 J K(-1) mol(-1), and the binding parameters of the phenolate to the mu-peroxo species DeltaH degrees(b) = -8.1 +/- 1.2 kJ mol(-1) and DeltaS degrees(b) = -8.9 +/- 6.2 J K(-1) mol(-1). Thus, the complete set of kinetic and thermodynamic parameters for the two separate steps of O2 binding and phenol hydroxylation have been obtained for [Cu2(MeL66)]2+.     

Equilibria between alpha- and beta-agostic stabilized rotamers of secondary alkyl niobium complexes.

The isopropyl chloro complex Tp(Me2)NbCl(i-Pr)(PhC&tbd1;CMe) (2) [Tp(Me2) = hydrotris(3,5-dimethylpyrazolyl)borate] exhibits a beta-agostic structure in the crystal. The conformation of the alkyl group is such that the agostic methyl group lies in the Calpha-Nb-Cl plane and the nonagostic one, in a wedge formed by two pyrazole rings. As observed by solution NMR spectroscopy, restricted rotation about the Nb-C bond allows the observation of an equilibrium between this species, 2beta, and a minor alpha-agostic rotamer 2alpha. A putative third rotamer which would have the secondary hydrogen in the wedge is not observed. Similar behavior is observed for related Tp'NbCl(i-Pr)(R(2)C=CMe) [Tp' = Tp(Me2), R(2) = Me (3); Tp' = Tp(Me2,4Cl), R(2) = Ph (4)]. The two diastereomers of the sec-butyl complex Tp(Me2)NbCl(sec-Bu)(MeC=CMe) (5) have been separated. In the crystal, 5CR-AS has a beta-agostic methyl group with the ethyl group located in the wedge formed by two pyrazole rings. The same single beta-agostic species is observed in solution. The other diastereomer, 5AR-CS has a beta-agostic methylene group in the solid state, and the methyl group sits in the wedge. In solution, an equilibrium between this beta-agostic methylene complex 5AR-CSbeta and a minor alpha-agostic species 5AR-CSalpha, where the ethyl substituent of the sec-Bu group is located in the wedge between two pyrazole rings, is observed. NMR techniques have provided thermodynamic parameters for these equilibria (K = 2beta/2alpha = 4.0 +/- 0.1 at 193 K, DeltaG(o)(193) = -2.2 +/- 0.1, DeltaH(o) = -7.4 +/- 0.1 kJ mol(-)(1), and DeltaS(o) = -27 +/- 1 J K(-)(1) mol(-)(1)), as well as kinetic parameters for the rotation about the Nb-C bond (at 193 K, DeltaG(2)= 47.5 +/- 2.5, DeltaH= 58.8 +/- 2.5 kJ mol(-)(1), and DeltaS = 59.0 +/- 10 J K(-)(1) mol(-)(1)). Upon selective deuteration of the beta-methyl protons in Tp(Me2)NbCl[CH(CD(3))(2)](PhC=CMe) (2-d(6)), an expected isotope effect that displaces the equilibrium toward the alpha-agostic rotamer is observed (K = 2-d(6)beta/2-d(6)alpha = 3.1 +/- 0.1 at 193 K, DeltaG(o)(193) = -1.8 +/- 0.1, DeltaH(o) = -8.3 +/- 0.4 kJ mol(-)(1) and DeltaS(o)= -34 +/- 2 J K(-)(1) mol(-)(1)). The anomalous values for DeltaH(o) and DeltaS(o) are discussed. Hybrid quantum mechanics/molecular mechanics calculations (IMOMM (B3LYP:MM3)) on the realistic model Tp(Me2)NbCl(i-Pr)(HC=CMe) have reproduced the energy differences between the alpha- and beta-agostic species with remarkable accuracy. Similar calculations show that Tp(Me2)NbCl(CH(2)Me)(HC=CMe) is alpha-agostic only and that Tp(5)(-)(Me)NbCl(CH(2)Me)(HC=CMe), which has no methyl groups at the 3-positions of the pyrazole rings, is beta-agostic only. Analysis and discussion of the computational and experimental data indicate that the unique behavior observed for the secondary alkyl complexes stems from competition between electronic effects favoring a beta-agostic structure and steric effects directing a bulky substituent in the wedge between two pyrazole rings of Tp(Me2). All of the secondary alkyl complexes thermally rearrange to the corresponding linear alkyl complexes via a first-order reaction.     

Influence of media and homoconjugate pairing on transition metal hydride protonation. An IR and DFT study on proton transfer to CpRuH(CO)(PCy3)

The interaction of the ruthenium hydride complex CpRuH(CO)(PCy(3)) (1) with proton donors HOR of different strength was studied in hexane and compared with data in dichloromethane. The formation of dihydrogen-bonded complexes (2) and ion pairs stabilized by hydrogen bonds between the dihydrogen ligand and the anion (3) was observed. Kinetics of the interconversion from 2 to 3 was followed at different (CF(3))(3)COH concentrations between 200 and 240 K. The activation enthalpy and entropy values for proton transfer from the dihydrogen-bonded complex 2 to the (eta(2)-H(2))-complex 3 (DeltaH() = 11.0 +/- 0.5 kcal/mol and DeltaS() = -19 +/- 3 eu) were obtained for the first time. The results of the DFT study of the proton transfer process, taking CF(3)COOH and (CF(3))(3)COH as a proton donors and introducing solvent effects in the calculation with the PCM method, are presented. The role of homoconjugate pairs [ROHOR](-) in the protonation is analyzed by means of the inclusion of an additional ROH molecule in the calculations. The formation of the free cationic complex [CpRu(CO)(PCy(3))(eta(2)-H(2))](+) is driven by the formation of the homoconjugated anionic complex [ROHOR](-). Solvent polarity plays a significant role stabilizing the charged species formed in the process. The theoretical study also accounts for the dihydrogen release and production of CpRu(OR)(CO)(PCy(3)), observed at temperatures above 250 K.     

Proton exchange kinetics from the bound waters on the oxo-centered rhodium(III) trimer [Rh3(mu3-O)(mu-O2CCH3)6(OH2)3]+: a variable pH and temperature 1H NMR study

Proton exchange from the bound to the bulk waters on the oxo-centered rhodium(III) trimer, [Rh(3)(micro(3)-O)(micro-O(2)CCH(3))(6)(OH(2))(3)](+)(abbreviated as Rh(3)(+)), was investigated over the temperature range of 219.1-313.9 K using a (1)H NMR line-broadening technique. By solving the modified Bloch equations for a two-site chemical exchange, lifetimes (tau) for proton transfer at pH = 2.7, 3.6, and 7.0 ([Rh(3)(+)]= 26 mM, T= 298 K) were determined to be 0.3 (+/-.08) ms, 2 (+/-0.3) ms, and 0.2 (+/-0.2) ms, respectively. From the temperature dependence of the rate, the activation parameters were determined to be DeltaH(++)= 16.2 (+/-0.5) kJ mol(-1) and DeltaS(++)=- 123 (+/-2) J mol(-1) K(-1), DeltaH(++)= 14.9 (+/-0.5) kJ mol(-1) and DeltaS(++)=- 141 (+/-2) J mol(-1) K(-1), and DeltaH(++)= 45 (+/-2) kJ mol(-1) and DeltaS(++)=- 22 (+/-5) J mol(-1) K(-1) for pH = 2.7, 3.6 and 7.0, respectively. All results are reported for a mixed solvent system [acetone : 250 mM NaClO(4)(aq)(3:1)], which was necessary to depress the freezing point of the solution so that the (1)H NMR signal due to bound water could be observed. The pK(a) of Rh(3)(+) was measured to be 8.9 (+/-0.2) in the mixed solvent, which is near the pK(a) for an aqueous solution (8.3 (+/-0.2)). Surprisingly, the lifetimes for protons on Rh(3)(+) are close to those observed for the Rh(OH(2))(6)(3+) ion, in spite of the considerable difference in structure, Br?nsted acidity of the bound waters and average charge on the metal ion.     

High temperature shock-tube study of the reaction of gallium with ammonia

The gas-phase reaction of Ga atoms with NH(3) was studied behind reflected shock waves in the temperature range of 1380 to 1870 K at pressures of 1.4 to 4.0 bar. Atomic-resonance-absorption spectroscopy (ARAS) at 403.299 nm was applied for the time-resolved determination of the Ga-atom concentration. Trimethylgallium (Ga(CH(3))(3)) was used as a precursor of Ga atoms. After the initial increase in Ga concentration due to Ga(CH(3))(3) decomposition, the Ga concentration decreases rapidly in the presence of NH(3). For the simulation of the measured Ga-atom concentration profiles from the studied reaction, additional knowledge about the thermal decomposition of Ga(CH(3))(3) is required. The rate coefficient k(4) of the reaction Ga + NH(3) → products (R4) was determined from the Ga-atom concentration profiles under pseudo-first-order assumption and found to be k(4)(T) = 10(14.1±0.4) exp(-11?900 ± 700 K/T) cm(3) mol(-1) s(-1) (error limits at the one standard deviation level). No significant pressure dependence was noticeable within the scatter of the data at the investigated pressure range.     

An unusual exchange between alkylidyne alkyl and bis(alkylidene) tungsten complexes promoted by phosphine coordination: kinetic, thermodynamic, and theoretical studies

d0 Tungsten alkylidyne alkyl complex (Me3SiCH2)3W(CSiMe3)(PMe3) (4a) was found to undergo a rare, PMe3-promoted exchange with its bis(alkylidene) tautomer (Me3SiCH2)2W(=CHSiMe3)2(PMe3) (4b). Thermodynamic studies of the exchange showed that 4b is favored and gave Keq and the enthalpy and entropy of the equilibrium: DeltaH degrees = -1.8(0.5) kcal/mol and DeltaS degrees = -1.5(1.7) eu. Kinetic studies of the alpha-H migration between 4a and 4b by variable-temperature NMR gave rate constants k1 and k-1 for the reversible reactions and activation enthalpies and entropies: DeltaH1 = 16.2(1.2) kcal/mol and DeltaS1 = -22.3(4.0) eu for the forward reaction (4a --> 4b); DeltaH2 = 18.0(1.3) kcal/mol and DeltaS2 = -20.9(4.3) eu for the reverse reaction (4b --> 4a). Ab initio calculations at the B3LYP level revealed that PMe3 binds with the bis(alkylidene) tautomer relatively more strongly than with the alkylidyne tautomer and thus stabilizes the bis(alkylidene) tautomer.     

Synthesis, structure, and substitution mechanism of new Ru(II) complexes containing 1,4,7-trithiacyclononane and 1,10-phenanthroline ligands

Two new Ru complexes containing the 1,10-phenanthroline (phen) and 1,4,7-trithiacyclononane ([9]aneS3, SCH2CH2SCH2CH2SCH2CH2) ligands of general formula [Ru(phen)(L)([9]aneS3)]2+ (L = MeCN, 3; L = pyridine (py), 4) have been prepared and thoroughly characterized. Structural characterization in the solid state has been performed by means of X-ray diffraction analyses, which show a distorted octahedral environment for a diamagnetic d6 Ru(II), as expected. 1H NMR spectroscopy provides evidence that the same structural arrangement is maintained in solution. Further spectroscopic characterization has been carried out by UV-vis spectroscopy where the higher acceptor capability of MeCN versus the py ligand is manifested in a 9-15-nm blue shift in its MLCT bands. The E1/2 redox potential of the Ru(III)/Ru(II) couple for 3 is anodically shifted with respect to its Ru-py analogue, 4, by 60 mV, which is also in agreement with a higher electron-withdrawing capacity of the former. The mechanism for the reaction Ru-py + MeCN--> Ru-MeCN + py has also been investigated at different temperatures with and without irradiation. In the absence of irradiation at 326 K, the thermal process gives kinetic constants of k2 = 1.4 x 10(-5) s(-1) (DeltaH(++) = 108 +/- 3 kJ mol(-1), DeltaS(++) = -8 +/- 9 J K(-1) mol(-1)) and k-2 = 2.9 x 10(-6) s(-1) (DeltaH(++) = 121 +/- 1 kJ mol(-1), DeltaS(++) = 18 +/- 3 J K(-1) mol(-1)). The phototriggered process is faster and consists of preequilibrium formation of an intermediate that thermally decays to the final Ru-MeCN complex with an apparent rate constant of (k1Khnu)app = 1.8 x 10(-4) s(-1) at 304 K, under the continuous irradiation experimental conditions used.     

Complex formation of trimethylaluminum and trimethylgallium with ammonia: evidence for a hydrogen-bonded adduct

We have investigated the formation of gas-phase adducts of trimethylaluminum and trimethylgallium with ammonia using room-temperature Fourier transform infrared experiments and density functional theory calculations. Our results indicate for the first time that, at higher partial pressures, a product distinct from the well-known (CH3)3M:NH3 adduct grows in for both M = Al and M = Ga. Comparison of the experimental and calculated IR spectra, along with calculations of the energetics, indicates that this second product is the result of hydrogen bonding of a second NH3 molecule to the (CH3)3M:NH3 adduct and can be written as (CH3)3M:NH3...NH3. The binding energy of this hydrogen-bonded adduct is calculated to be 26.8 kcal/mol for M = Al and 18.4 kcal/mol for M = Ga and is lower in energy (more stable) relative to the 1:1 (CH3)3M:NH3 adduct by 7.2 kcal/mol for M = Al and 6.6 kcal/mol for M = Ga. In contrast, an alternative complex involving the formation of two separate M-N donor-acceptor bonds, which is written as H3N:(CH3)3M:NH3, is calculated to be lower in energy relative to (CH3)3M:NH3 by only 0.1 kcal/mol for M = Al and 0.2 kcal/mol for M = Ga and is not observed experimentally. These results show that hydrogen bonding plays an important role in the interaction of ammonia with metal organic precursors involving Al, Ga, and In, under typical metal organic chemical vapor deposition AlGaInN growth conditions.     

Monolayer-based selective optical recognition and quantification of FeCl3 via electron transfer

Reagentless optical recognition and parts-per-million (ppm) quantification of FeCl3 in CH3CN was demonstrated using a redox-active Os(II)-chromophore-based monolayer on glass. The Fe3+-induced oxidation of the monolayer is fully reversible and can be monitored optically with a conventional UV/vis spectrophotometer (260-800 nm). The system can be reset with water within <1 min. Selectivity of the sensor toward FeCl3 is not affected by the presence of representative alkali metals, alkaline earth metals, and other transition-metal salts. Sensing of Fe3+ and concurrent generation of Fe2+ can be also observed with the naked eye by adding 2,2'-bipyridyl (bipy) to the solution to generate [Fe(bipy)3]2+. Validation of the analytical performance characteristics of the sensor was performed including reversibility, reproducibility, stability, and the detection range (0.5-162 ppm of FeCl3 in CH3CN, 100-1000 ppm in water). The monolayer is sensitive and specifically responsive to its target ion. In addition, a blind test was conducted to probe the reproducibility and reproducibility variances of the system. The reaction of the monolayer with a CH3CN solution containing 5 ppm of FeCl3 follows pseudo first-order kinetics in the monolayer with DeltaG298K = 21.6 +/- 0.1 kcal/mol, DeltaH = 10.2 +/- 1.5 kcal/mol, DeltaS = -38.3 +/- 4.9 eu.