On the Transition from Tin-Rich to Antimony-Rich European White Soda-Glass Trade Beads for the Senecas of Northeastern North America

It has been shown that several modifications occurred, over the span of the 17th to 19th centuries, in the agents used to opacify European-made white soda-glass beads that were transmitted as trade goods to northeastern North America. Tin was used at the beginning of the 17th century, followed by Sb later in the century, and then by As during the 18th and 19th centuries. In an attempt to define more closely the transition from Sn-rich to Sb-rich white beads, we analyzed 198 white glass beads from a number of archaeological sites in western New York State. Chemical analysis shows that the arrival of Sb-white soda-glass trade beads began in this region during the period from approximately A.D. 1625–1640, and that they had completely replaced Sn-white beads by A.D. 1675. Specific bead chemistries link a number of the archaeological sites.     

A radiofrequency glow-discharge-time-of-flight mass spectrometer for direct analysis of glasses

A radiofrequency (rf) glow-discharge (GD) ion source coupled to a commercial on-axis time-of-flight mass spectrometer (TOFMS) has been developed for the direct analysis of non-conducting samples. Different instrumental configurations of the rf-GD source, including the optional use of a sampler cone and the possibility of allowing electrical floating of the discharge, were evaluated first with a conducting sample. Higher ion signals were obtained when the GD was electrically floating and no sampler cone was used. A homogeneous glass was then analyzed using two different rf-GD configurations—with a sampler cone and discarding the use of the sampler cone. The atomic mass spectra obtained with the TOFMS using both configurations were compared. Analyte signals were systematically higher for the latest mode which avoids the sampler cone. The analytical capability of the proposed rf-GD–TOFMS system for the analysis of thick glasses, up to 6 mm, has been investigated in terms of sensitivity, isotopic ratio accuracy, and mass-resolving power. Different homogeneous glasses (including glasses as thick as 6 mm) have been analyzed and major and minor elements were detected. Isotope ratio accuracies of about ±1% and mass resolving powers of about 700 were observed.     

Simple fabrication of a smart microarray of polystyrene microbeads for immunoassay

We describe a simple method to fabricate an array of polystyrene microbeads (PS μbeads) conjugated with an elastin-like polypeptide (ELP) on a glass surface using a removable polymer template (RPT). A thin layer of adhesive was spun-cast on glass and cured by UV radiation. Micropatterns of an RPT were then transferred onto the surface by microcontact printing. The adhesion of PS μbeads on the surface depended on the adhesion performance of the adhesive layer, which could be adjusted by irradiation time. An array of PS μbeads conjugated with ELP was used for a smart immunoassay of prostate-specific antigen (PSA), a cancer marker. By controlling the phase transition of ELP molecules, PSA molecules were selectively adhered or released from the bead surface. The selective and reversible binding of PSA molecules on the bead surface was characterized with fluorescence microscopy.     

Die spezifische Wärme des Polyvinylchlorids

Zusammenfassung Die spezifische Wärme verschiedener handelsüblicher Polyvinylchlorid-Sorten (Suspensions- und Emulsions-PVC, schlagfestes PVC und ein Vinylchlorid-Vinylacetat-Copolymerisat) wurde im Temperaturbereich 20 (bzw. –50) bis 140 °C mit einem adiabatischen Kalorimeter gemessen. Besondere Aufmerksamkeit wurde dem Einfluß der thermischen Vorgeschichte gewidmet. Messungen an getemperten Proben ergaben — in Übereinstimmung mit den Ergebnissen anderer Autoren —einfache Kurvenzüge mit einem Steilanstieg der spezifischen Wärme im Einfriergebiet. Untersuchungen an abgeschreckten Proben ließen zu Beginn des Einfrierbereiches Minima der spezifischen Wärme infolge Enthalpierelaxation erkennen. Oberhalb des Einfrierbereichs zeigten sich Kristallisationserscheinungen mit Wärmetönungen von etwa –1,3 cal/g (exotherm). Hieraus wurde der kristalline Anteil des Polyvinylchlorids zu rund 3% abgeschätzt. Der Schmelzpunkt der PVC-Kristallite wurde differentialthermoanalytisch zu 156 bzw. 170 °C gefunden. Das schlagfeste PVC ließ das Schmelzen einer Spur Polyäthylen zwischen 102 und 125 °C erkennen. Die kalorimetrisch bestimmten Einfriertemperaturen stimmen mit dilatometrisch gemessenen — gleiche thermische Vorbehandlung vorausgesetzt — überein.

---

Summary The specific heat of some commercially available samples of polyvinyl chloride (suspension PVC, emulsion PVC, high impact PVC, and a copolymerisate of vinylchloride and vinylacetate) was measured in the temperature range from 20 (or –50) to 140 °C, using an adiabatic calorimeter. Special attention was paid to the influence of thermal history of the samples. Investigations of annealed samples gave simple curves with a steep slope in the glass transition range, in agreement with the results of other authors. Measurements with samples quenched in ice water showed specific heat curves with a minimum at the beginning of the glass transition range caused by enthalpy relaxation. Above the glass transition range crystallization occurred accompanied by heat effects of about –1,3 cal/g (exothermal). From this the fraction of crystalline PVC was estimated to be about 3%. The melting point of the PVC crystallites as determined by differential thermal analysis was 156 or 170 °C. With high impact PVC the melting of traces of polyethylene was observed between 102 and 125 °C. The glass transition temperatures as determined by calorimetry agreed with those determined by dilatometric measurements, provided thermal pretreatment being equal in both cases.

---

---

Mit 14 Abbildungen und 5 Tabellen     

Thermal Analysis of Sulfide Ge—Ga Glasses Doped by Praseodymium

The present study shows the dependence of the temperature of glass transition — T _g upon the presence and quantity of doping Pr atoms. Substantial effect of the form — chemical nature of compound from which the doping atoms are incorporated into the glass has been displayed as well. With the increase of the content of sulfidic form T _g values approach the level of undoped glasses. Thus, if the studied glasses are doped by sulfidic form, bonded areas atoms of Pr so atoms of S. Glasses doped by halogenous source of Pr behave differently; the shift of the T _g value does not change with the amount of the dopand, displaying the anion deficiency of glass stoichiometry in studied interval of halogenous dopands. Generally, a very slight non-stability of the glass against the oxidation in temperature region of glass transition is observed.This revised version was published online in November 2005 with corrections to the Cover Date.     

Advances in the chemistry of natural flavins

The review discusses advances in the chemistry of isoalloxazines in the last 10 years, including 1978, in the field of the detection of new derivatives of flavin (7,8-dimethylisoalloxazine) and modifications of it in natural sources — microorganisms, fungi, and plant and animal tissues — and their isolation from these sources. Questions of the establishment of structure, chemical and physicochemical properties, chemical synthesis, and the biological activity of the new flavin vitamins and prosthetic groups of flavoproteins are considered. The priority of Soviet scientists in the discovery of the covalent type of bond with the prosthetic group in some flavin enzymes is noted.All-Union Scientific-Research Vitamin Institute, Moscow. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 255–275, May–June, 1979.     

A composite Bayesian hierarchical model of compositional data with zeros

We present an effective approach for modelling compositional data with large concentrations of zeros and several levels of variation, applied to a database of elemental compositions of forensic glass of various use types. The procedure consists of the following: (i) partitioning the data set in subsets characterised by the same pattern of presence/absence of chemical elements and (ii) fitting a Bayesian hierarchical model to the transformed compositions in each data subset. We derive expressions for the posterior predictive probability that newly observed fragments of glass are of a certain use type and for computing the evidential value of glass fragments relating to two competing propositions about their source. The model is assessed using cross‐validation, and it performs well in both the classification and evidence evaluation tasks. Copyright © 2014 John Wiley & Sons, Ltd.     

Heterocyclic enamides — Derivatives of imidazolidine nitrosyl radicals: Reactions with nucleophilic and electrophilic reagents

The reactions of the heterocyclic enamides — 4-alkyliden-2,2,5,5-tetraalkyl-3-formylimidazolidin-1-oxyls — with organomagnesium and organolithium compounds takes place at two reaction centers — the N-formyl group and the C=C endocyclic carbon atom — to give three types of product: 3-imidazoline derivatives, substituted formyl derivatives, or acyclic nitroxyl radicals. Enamides with POCl₃ in DMF gives products of electrophilic substitution at the exocyclic methylene group with retention of the N-formyl.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 620–624, May, 1988.     

Structural Studies on Saturated Aqueous Solutions of Manganese(II), Cobalt(II), and Nickel(II) Chlorides by X-ray Diffraction

As a part of our studies on crystallization processes of electrolytes, the structure of aqueous solutions of MCl₂ (M = Mn, Co, Ni) equilibrated with hydrate crystals, MCl₂ · mH₂O (m = 6, 4, 2), was investigated by means of X-ray diffraction at 25, 40, 55, and 70°C. The complexes formed in MnCl₂ solutions, were found to be mixed–ligand chloroaqua octahedral complexes of M²⁺ ions with the Mn—O and Mn—Cl distances of about 220 and 251 pm, respectively. The average number of Mn—Cl and Mn—O interactions increased from 1.2 to 1.9 and decreased from 4.8 to 4.1, respectively, with changing MnCl₂ solutions from Mn25 (MnCl₂ solution at 25°C) to Mn70 (MnCl₂ solution at 70°C). In the octahedral species of Co²⁺, the Co—O and Co—Cl distances were found to be about 211 and 240 pm, respectively. With an increase in the saturated concentration by changing temperature from 25 to 70°C, the average coordination number of the Co—Cl contact per Co²⁺ increased from 0.5 to 1.2, and the average number of Co—O interactions decreased from 5.5 to 4.8. The structural analysis was carried out by taking into consideration the existence of the tetrahedral species in the solutions saturated at 40, 55, and 70°C, on the assumption of the existence of [CoCl₄]^2–. The Co—Cl distance was found to be 228 pm, while the number of Co—Cl interactions in the [CoCl₄] complex was calculated to be 3.7 by the least-squares calculations. The Ni—O and Ni—Cl distances were estimated to be about 206 and 237 pm, respectively. The frequency factor n of the Ni—O and Ni—Cl interactions decreased monotonously from 5.6 to 5.0 and increased from 0.4 to 1.0, respectively, with increasing NiCl₂ concentration. The n values of the Co—Cl and Ni—Cl interactions of the octahedral complexes increased sharply with concentration at higher concentrations. Comparing structures of the complexes in the saturated solutions and the hydrate crystals of these metal ions, we discussed a role of the complexing species on crystallization of the hydrates.     

Boson peak and fast relaxation process near the glass transition in polystyrene

Atactic polystyrene, both side group and main chain deuterated, was investigated by inelastic neutron scattering in a wide temperature range around the glass transition from 2 to 450 K. In the glass the Boson peak position is only very weakly influenced by the deuteration of the phenyl group. In the neighborhood of the glass transition temperatureT _g we find a fast relaxation process similar to other glasses. The onset of the fast relaxation in polystyrene, however, is observed already at temperaturesT _g — 200 K. Results from partially deuterated polystyrene suggest a change of the phenyl ring dynamics already far belowT _g.     

Simultaneous activation determinatio of aluminium,magnesium, and silicon in rocks,glasses, and pottery

A method for simultaneous neutron activation determination of Al, Mg and Si using two irradiations in a nuclear reactor—the first one with epithermal and the second one with pile neutrons is proposed. The applicability of the method is demonstrated by the analysis of standard reference materials—rocks, glass, as well as of archaeological finds from medieval glass and sgraffito ceramics.     

DSC and p-V-T Study of PVC/PMMA Blends

Poly(vinyl chloride)/Poly(methyl methacrylate) — PVC/PMMA — blends were investigated by comparative p-V-T and differential scanning calorimetry (DSC) measurements. The study was concentrated on the glass transition range of the blends, and it was found that the blends are characterized by a single glass transition temperature suggesting miscibility of the blend components. It is shown that the glass temperature of the blends increases with both increasing heating rate and pressure. In parallel hereto one observes a decrease in the volume expansion coefficients, which is more accentuated for the polymeric melts than for the polymeric glasses. The dependence of the glass temperature on the composition of the polymer blends shows a sigmoidal behaviour which is due to the fact that positive deviations of the glass temperature from values predicted by additivity rules are observed in the high PVC concentration range, whereas in the high PMMA range negative deviations occur. This suggests a denser packing of the blends and thus a stronger interaction between the blend components in the high PVC concentration range. These packing differences increase with increasing pressure and decreasing heating rate and are generally more accentuated for the glass temperatures evaluated from p-V-T measurements.This revised version was published online in November 2005 with corrections to the Cover Date.     

Thermal Analysis of Poly(AN—co—St) and Poly(AN—St—MMA)

Poly(AN—co—St) (PAS) and poly(AN—St—MMA)(PASM) were synthetized by emulsion polymerisation. The glass transition temperatures (T_g) of the copolymers and the relationship between T_g and the components of the copolymers were investigated by differential scanning calorimetry. The results show that T_g for the AN—St bipolymers has apeak value in the range 115–118°C at a content of 50 mass% St. When methyl methacrylate was added, the T_g of the terpolymer was decreased by about 2–6°C.The thermostability and the activation energy E of degradation were determined by thermogravimetric analysis.This revised version was published online in November 2005 with corrections to the Cover Date.     

Comparison of galactomannan crosslinking with organotitanates and borates

Water-soluble polymers crosslinked with metal ions form stable gels that are used in oil and gas production processes. We present an investigation of the chemistry of the binding between guar galactomannans and both borates and titanates using NMR and dynamic light scattering. The two monosaccharides comprising guar — methyl--D-galactopyranoside and methyl--D-mannopyranoside — have been studied as model compounds. High resolution¹³C NMR detected complexation of the sugars with borate but displayed no sign of complexation with either of the two titanates even at high titanate concentrations. Dynamic light scattering studies demonstrated the existence of colloidal titanium dioxide particles for both titanate crosslinkers. The loss of free titanium to the colloidal particles reduces the concentration of titanium crosslinking sites to below the detectable limits of NMR. The role of colloidal titanium dioxide colloids in these crosslinking reactions has not been reported previously. Data are presented following the growth of these particles with time as a function of pH and salt concentration. The observed particle growth kinetics explains the observed sensitivity of the guar gelation process to these variables.     

Alkaloids ofColchicum luteum

The paper gives a review of the alkaloids ofColchium luteum Baker from various growth sites. The structure of luteidine — one of the main alkaloids of the plant — has been established. In addition, two new alkaloids have been isolated from the plant and the structure of one of them has been established as collutine N-oxide.M. I Kalinin Turkmen Agricultural Institute, Ashkhabad, and V. I. Lenin Tashkent State University. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 810–815, November–December, 1985.     

Mass spectrometry of stereoisomeric 3-hydroxy-4-piperidones

The existence of several sites of charge localization upon the mass spectrometric decomposition of stereoisomeric 3-hydroxy-4-piperidones leads to a large number of fragmentation products both with retention and destruction of the piperidine ring. Analysis of the mass spectra of the compounds studied showed that the appearance of [M — CO]⁺ ion peaks for isomers with an axial hydroxyl group may serve as a method for determining the configuration of the carbinol site of such cyclic structures.Translated from Khimiya Geterotsiklichesikh Soedinenii, No. 3, pp. 375–379, March, 1986.     

Multiscale structure of the underwater adhesive of Phragmatopoma californica: a nanostructured latex with a steep microporosity gradient

Phragmatopoma Californica builds a tubular dwelling by gluing bits of sand and seashell together underwater with a proteinaceous adhesive. In the lab, the animals will build with 0.5 mm glass beads. Two spots of glue with a consistent volume of about 100 pL each are deposited on the glass beads before placement on the end of the tube. The animals wriggled the particles for 20-30 s before letting go, which suggested that the adhesive was sufficiently set within 30 s to support the glass beads. The structure of the adhesive joints was examined at the micro- and nanoscopic length scales using laser scanning confocal and atomic force microscopies. At the microscale, the adhesive was a cellular solid with cell diameters ranging from 0.5 to 6.0 mum, distributed to create a steep porosity gradient that ranged from near zero at the outside edges to about 50% at the center of the adhesive joint. At the nanoscale, the adhesive appeared to be an accretion of trillions of deformable nanospheres, reminiscent of a high-solids-content latex adhesive. The implications of the structure for the functionality of the adhesive is discussed.     

Development of Na+-sensitive membranes based on sputtered Na-Al-Si glasses

Na⁺-sensitive microdevices are of increasing interest for integration in microanalytical systems e.g. for biomedical applications or for industrial process control. In order to produce ultra thin Na⁺-sensitive layers with fixed and reproducible composition and, in particular, defined Na concentration by means of RF sputtering, an off-axis geometry of a magnetron with cylindrical target was chosen for minimizing back-sputtering effects from the already deposited material. With this inverted cylindrical magnetron (ICM) it was possible to obtain reproducible and controllable sodium aluminosilicate glass layers on semiconductor substrates. Several surface and thin layer analytical techniques were applied for characterization of the membranes and for stoichiometry control. Especially by the non-destructive nuclear reaction analysis method a constant Na profile throughout the glass layer and — together with AES depth profiles — the diffusion barrier effect of an Si₃N₄ interface layer could be verified. Electrochemical measurements proved Nernstian sensitivity down to 10^–4 M Na⁺ in solutions of pH 7, supporting sufficient stability and reproducibility of the sputtered Na⁺-sensitive layers.     

Dipole moments and azole structures (review)

Data on the dipole moments of azoles are correlated and systematized. The possibilities of the method of dipole moments in the solution of a number of problems of the chemistry of azole-containing systems — the electronic structures of azoles, intermolecular association, tautomeric and conformational equilibria, and reactivities — are demonstrated. The experimental values of the dipole moments of azoles are tabulated.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 867–892, July, 1971.     

A New Predictive Equation for the Depression in Freezing Points of Multicomponent Aqueous Solutions Conforming to the Linear Isopiestic Relation

The linear isopiestic relation has been used together with a well-known thermodynamic equation to establish a new predictive equation for freezing point depression. This equation can provide predictions for multicomponent solutions conforming to the linear isopiestic relation using only information on the corresponding binary subsystems. The predictive capability of the equation has been tested by comparing with the experimental data at 25°C reported in the literature and particularly those of Pathwardhan and Kumar. The systems used are NaCl—MgCl₂—H₂O, NaCl—BaCl₂—H₂O, NaCl—CaCl₂—H₂O, LiCl—NaCl—H₂O, LiCl—KCl—H₂O, LiCl—CsCl—H₂O, NaCl—KCl—H₂O, and NaBr—KBr—H₂O. The predictions of the two equations agree well with the experimental data although our new equation is, in general, better.