Preparation, Characterization and Catalytic Performance of La-SO4/SBA-15 in Esterification of Acetic Acid with n-Butanol

La-SO42-/SBA-15 was synthesized with various amounts of lanthanum via incipient-wetness impregnation. Characterization was done by X-ray diffraction（XRD）, transmission electron micrographs（TEM）, nitrogen adsorption, FTIR spectroscopic analysis, thermogravimetric analysis, and the total amount of acidity of catalyst was estimated by TPD of NH3. The results indicate that lanthanum has been incorporated into SBA-15 molecular sieve. The prepared materials（La-SO42-/SBA-15） keep the highly ordered mesoporous two-dimensional hexagonal structure and do not change the mesoporous channel structure of the support SBA-15. The catalyst showed best catalytic activity in the synthesis of n-butyl acetate. The optimum conditions of the esterification by orthogonal experiments were studied： the molar ratio of n-butanol to acetic acid 1：1.2, the amount of catalyst 7.5%, reaction time 80 min. The yield of n-butyl acetate could reach 93.2% under the optimum conditions. The catalyst was recyclable, cost effective and environmental friendly.     

Synthesis of Mesoporous Silica and Ti-containing Molecular Sieves via A Novel Assembly

Although titanium silicate-1 (denoted TS-1) is an effective catalyst for the selective oxidation of organic substrates1,2, the substrates that can be oxidized by TS-1 are limited to species having kinetic diameters ( 6 ?. However, the recently discovered silica-based mesoporous molecular sieve offers new opportunities for the preparation of large-pore TS-1 analogs capable of transforming larger organic molecules. The Ti-containing mesoporous molecular sieve catalysts thus obtained, are promi…     

Ruthenium promotion of Co/SBA-15 catalysts for Fischer-Tropsch synthesis in slurry-phase reactors

The aim of this work was to evaluate the catalytic properties of a Ru promoted Co/SBA-15 catalyst for Fischer-Tropsch synthesis(FTS).The Ru promoted Co/SBA-15 catalyst was prepared by wet impregnation method and was characterized by X-ray diffraction,X-ray energy dispersion spectrophotometer,N2 adsorption-desorption,temperature-programmed reduction and transmission electron microscopy.The Fischer-Tropsch synthesis using the catalyst was carried out to evaluate the catalyst activity and its effect on FTS product distribution.The synthesis was carried out in a slurry reactor operating at 513 K,20 atm,CO:H2 molar ratio of 1:1.X-ray diffraction showed that the calcined cobalt catalyst did not modify the structure of SBA-15,proving that Co was present in the form of Co3O4 in the catalyst.The addition of cobalt in SBA-15 decreased the specific superficial area of the molecular sieve.Fischer-Tropsch synthesis activity and C5+hydrocarbon selectivity increased with the addition of Ru.The increases in activity and selectivity were attributed to the increased number of active sites resulting from higher reducibility and the synergetic effect of Ru and Co.Ru/Co/SBA-15 catalysts showed moderate conversion(40%)and high selectivity towards the production of C5+(80 wt%).     

A microbially based approach for the asymmetric synthesis of both enantiomers of R-and S-fluoxetine

Both enantiomers of fluoxetine were synthesized in five steps from ethyl benzoylacetate(1)using microbial-chemical approach with overall yields of 59% and 62% respectively.(S)-Enan-tiomer can be obtained in >99% e.e.by resting cell of baker's yeast and the R form was produced in 81 %e.e.by immobilized Geotrichum sp.G 38.     

β-环糊精修饰MCM-41复合介孔材料的合成与表征

The β-CD was first successfully introduced into the pore of MCM-41 mesoporous sieve, with γ-glycidoxypr- opyltrimethoxy silane (GPTS) as a coupling agent. An inorganic/organic complex mesoporous material β-CD- MCM-41 was synthesized, and characterized by XRD, nitrogen adsorption-desorption, elemental analysis, FT-IR and spectrophotofluorimetry. The results show that β-CD molecular not only get into the modified inner wall, but also remain the ordered mesoporou structure of MCM-41.     

SYNTHESIS AND PROPERTIES OF HIGH MOLECULAR WEIGHT POLY(LACTIC ACID) AND ITS RESULTANT FIBERS

Direct melt/solid polycondensation of lactic acid(LA)was carried out to obtain high molecular weight poly(lactic acid)(PLA)by a process using various catalysts in the first-step melt polycondensation,and followed solid polycondensation by using p-toulenesulfonic acid monohydrate(TSA)as the catalyst in the second step.Effects of various catalysts and reaction temperature on the molecular weight and crystallinity of resulting PLA polymers were examined.It was shown that SnCl_2·2H_2O/TSA,SnCl_2·2H_2O/succin...     

固载Ru基催化剂上二氧化碳加氢合成甲酸Ⅱ反应条件对催化剂性能的影响

The synthesis of formic acid from carbon dioxide and hydrogen using a silica immobilized ruthenium catalyst as precursor has been studied in different reaction conditions. The results revealed that the TOF （turn over frequency） of HCOOH achieved 1481.5 h^-1 on immobilized ruthenium catalyst near the critical pressure point of CO2 with H2 pressure of 4.0 MPa, reaction temperature of 80℃ and PPh3/Ru molar ratio of 6：1. The reaction activity of immobilized catalyst was higher than that of homogeneous catalyst, and the immobilized catalyst also offered the practical advantages such as easy separation and reuse.     

Modification of the(SiO_2/MgO/MgCl_2)·TiCl_x Ziegler-Natta Polyethylene Catalysts Using the Third Metal Elements

Various(SiO_2/MgO/MgCl_2)·Ti Clx Ziegler-Natta catalysts modified by the third metal elements were synthesized by the co-impregnation of water-soluble magnesium and the third metal salts. Several key factors including the electronegativity of the third metal elements, catalyst performances in ethylene homo-polymerization, ethylene/1-hexene copolymerization and hydrogen response were systematically investigated. Both the catalyst performance and the polymer properties are influenced by the introduction of the third metal elements. Compared with the unmodified(SiO_2/MgO/MgCl_2)·Ti Clx Ziegler-Natta catalyst, activity and 1-hexene incorporation are enhanced by the introduction of zirconium, vanadium, aluminum and chromium, while deteriorated by the addition of ferrum, nickel, molybdenum and tungsten. Correlations of the catalyst activities and 1-hexene incorporation ability with the electronegativity of the third metal elements are discovered. It is found that the lower electronegativity of the third metal elements leads to the catalyst with higher activity and higher α-olefin co-polymerization ability. The polyethylene produced by a nickel modified catalyst showed broad molecular weight distribution(MWD) and the lowest average molecular weight(MW), while by using a ferrum modified catalyst, the resulting polyethylene had the highest MW, reaching the ultra-high MW area. Vanadium and chromium modified catalysts demonstrated the best hydrogen response.     

Immobilization of chiral Rh catalyst on glass and application to asymmetric transfer hydrogenation of aryl ketones in aqueous media

A chiral catalyst, Cp＊RhTsDPEN （Cp＊ = pentamethyl cyclopentadiene, TsDPEN = substitutive phenylsulfonyl-l,2-diphenylethylenediamine）, was synthesized and immobilized at the surface of glass. The immobilized catalyst exhibited good catalytic efficiency for asymmetric transfer hydrogenation of aromatic ketones in water with HCOONa as hydrogen source.     

Suzuki Reaction of Aryl Bromides Using a Phosphine-Free Magnetic Nanoparticle-Supported Palladium Catalyst

A palladium catalyst immobilized on superparaganetic nanoparticles was prepared with a palladium loading of 0.30 mmol/g. The catalyst was characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry, thermogravimetric analysis, Fourier transform infrared, atomic absorption spectrophotometry, and nitrogen adsorption. The immobilized palladium catalyst was an efficient catalyst without added phosphine ligands for the Suzuki cross-coupling reaction of several aryl bromides with phenylboronic acid. The recovery of catalyst was simply by magnetic decantation in the presence of a magnet. The immobilized palladium catalyst can be reused many times without significant degradation in catalytic activity. No leaching of active palladium species into the reaction solution was detected.     

Selective response of antigen‐antibody reactions on chiral surfaces modified with 1,2‐diphenylethylenediamine enantiomers

This work reported a comparative analysis of the amperometric responses of antigen‐antibody reactions on two stable chiral surfaces which were modified with 1,2‐diphenylethylenediamine enantiomers. Alpha‐fetoprotein antibody and antigen (anti‐AFP and AFP) were selected as model systems. First, (1R,2R)‐1,2‐diphenylethylenediamine or (1S,2S)‐1,2‐diphenylethylenediamine was modified on the gold surface of the electrode through amide linkage to construct chiral surfaces. Then, anti‐AFP was immobilized on the chiral electrode surface by electrostatic and hydrogen bonding interactions. The electrochemical characteristics of the modified electrodes were studied via cyclic voltammetry. The selective current responses of antigen‐antibody reactions on chiral electrode surfaces for different incubation time and varying AFP concentrations were monitored. The antigen‐antibody reactions were greatly influenced by the chirality of 1,2‐diphenylethylenediamine enantiomers, and the amperometric responses obtained from the (1S,2S)‐1,2‐diphenylethylenediamine modified electrode was obviously stronger than that from the (1R,2R)‐1,2‐diphenylethylenediamine modified electrode. Such work may not only offer valuable reference to the research of chiral drugs, but also help to comprehend the high selectivity of chiral molecular species in biosystems. Copyright © 2011 John Wiley & Sons, Ltd.     

Catalytic asymmetric 1,2‐Addition/Lactonization tandem reactions for the syntheses of chiral 3‐Substituted phthalides using organozinc reagents

Using chiral phosphoramide ligand 2d‐ Zn (II) complex derived from (1R,2R)‐1,2‐diphenylethylenediamine as the catalyst, we have developed efficient catalytic asymmetric 1,2‐addition/lactonization tandem reactions of diverse organozinc reagents with varied methyl 2‐formylbenzoates for the construction of optically enriched 3‐aryl or alkyl substituted phthalides, which are significant building blocks of many important chiral pharmaceuticals and natural products. The corresponding products could be afforded with good to excellent yields (up to 95%) and moderate to good enantioselectivities (up to 89%).     

Polymer‐Supported Enantioselective Bifunctional Catalysts for Nitro‐Michael Addition of Ketones and Aldehydes

Introduction of an L ‐amino acid as a spacer and a urea‐forming moiety in a polymer‐supported bifunctional urea–primary amine catalyst, based on (1R, 2R)‐(+)‐1,2‐diphenylethylenediamine, significantly improves the catalyst’s activity and stereoselectivity in the asymmetric addition of ketones and aldehydes to nitroolefins. Yields and enantioselectivities, unprecedented for immobilized catalysts, were obtained with such challenging donors as acetone, cyclopentanone, and α,α‐disubstituted aldehydes, which usually perform inadequately in this reaction (particularly when a secondary‐amine‐based catalyst is used). Remarkably, though in the examined catalysts the D ‐amino acids as spacers were significantly inferior to the L isomers, for the chosen configuration of the diamine (match–mismatch pairs) the size of the side chain of the amino acid hardly influenced the enantioselectivity of the catalyst. These results, combined with the reactivity profile of the catalysts with substrates bearing two electron‐withdrawing groups and the behavior of the catalysts’ analogues based on tertiary (rather than primary) amine, suggest an enamine‐involving addition mechanism and a particular ordered C? C bond‐forming transition state as being responsible for the catalytic reactions with high enantioselectivity.     

Synthesis,characterization and catalytic performance in enantioselective reactions by mesoporous silica materials functionalized with chiral thiourea-amine ligand

Chiral heterogeneous catalysts have been synthesized by grafting of silyl derivatives of (1R, 2R)- or (1S, 2S)-1,2-diphenylethane-1,2-diamine on SBA-15 mesoporous support. The mesoporous material SBA-15 and so-prepared chiral heterogeneous catalysts were characterized by a combination of different techniques such as X-ray diffractometry (XRD), Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FESEM), and Brunauer–Emmett–Teller (BET) surface area. Results showed that (1R, 2R)- and (1S, 2S)-1,2-diphenylethane-1,2-diamine were successively immobilized on SBA-15 mesoporous support. Chiral heterogeneous catalysts and their homogenous counterparts were tested in enantioselective transfer hydrogenation of aromatic ketones and enantioselective Michael addition of acetylacetone to β-nitroolefin derivatives. The catalysts demonstrated notably high catalytic conversions (up to 99%) with moderate enantiomeric excess (up to 30% ee) for the heterogeneous enantioselective transfer hydrogenation. The catalytic performances for enantioselective Michael reaction showed excellent activities (up to 99%) with poor enantioselectivities. Particularly, the chiral heterogeneous catalysts could be readily recycled for Michael reaction and reused in three consecutive catalytic experiments with no loss of catalytic efficacies.

     

Chiral and Nonchiral [OsX2(diphosphane)(diamine)] (X: Cl,OCH2CF3) Complexes for Fast Hydrogenation of Carbonyl Compounds

The osmium complexes trans‐[OsCl₂(dppf)(diamine)] (dppf: 1,1′‐bis(diphenylphosphino)ferrocene; diamine: ethylenediamine in 3 , propylenediamine in 4 ) were prepared by the reaction of [OsCl₂(PPh₃)₃] ( 1 ) with the ferrocenyl diphosphane, dppf and the corresponding diamine in dichloromethane. The reaction of derivative 3 with NaOCH₂CF₃ in toluene afforded the alkoxide cis‐[Os(OCH₂CF₃)₂(dppf)(ethylenediamine)] ( 5 ). The novel precursor [Os₂Cl₄(P(m‐tolyl)₃)₅] ( 2 ) allows the synthesis of the chiral complexes trans‐[OsCl₂(diphosphane)(1,2‐diamine)] ( 6 – 9 ; diphosphane: (R)‐[6,6′‐dimethoxy(1,1′‐biphenyl)‐2,2′‐diyl]bis[1,1‐bis(3,5‐dimethylphenyl)phosphane] (xylMeObiphep) or (R)‐(1,1′‐binaphthalene)‐2,2′‐diylbis[1,1‐bis(3,5‐dimethylphenyl)phosphane] (xylbinap); diamine=(R,R)‐1,2‐diphenylethylenediamine (dpen) or (R,R)‐1,2‐diaminocyclohexane (dach)), obtained by the treatment of 2 with the diphosphane and the 1,2‐diamine in toluene at reflux temperature. Compounds 3 – 5 in ethanol and in the presence of NaOEt catalyze the reduction of methyl aryl, dialkyl, and diaryl ketones and aldehydes with H₂ at low pressure (5 atm), with substrate/catalyst (S/C) ratios of 10 000–200 000 and achieving turnover frequencies (TOFs) of up to 3.0×10⁵ h^?1 at 70 °C. By employment of the chiral compounds 6 – 9 , different ketones, including alkyl aryl, bulky tert‐butyl, and cyclic ketones, have successfully been hydrogenated with enantioselectivities up to 99 % and with S/C ratios of 5000–100 000 and TOFs of up to 4.1×10⁴ h^?1 at 60 °C.     

Preparation and structures of a series of phosphorus‐free Nickel(II) diamine complexes and their applications in hydrogenation of acetophenone

To develop economical and phosphorus‐free catalysts for hydrogenation of ketones, three new complexes, [Ni(1R,2R‐dpen)₂(H₂O)Cl]₂Cl₂· 2Et₂O (1), [Ni(1R,2R‐dpen)(phen)(CH₃OH)₂]Cl₂·2CH₃OH (2) and [Ni(1,8‐dan)₂(DMF)Cl]₂Cl₂· 3H₂O (3), and three reported compounds, [Ni(opda)(phen)Cl₂]·CH₃OH (4), [Ni(opda)₂Cl₂] (5) and [Ni(1,2‐dach)₂]Cl₂ (6), were prepared and the structures of new compounds were determined by single crystal X‐ray diffraction analysis, in which 1R,2R‐dpen, phen, 1,8‐dan, opda and 1,2‐dach denote 1R,2R‐1,2‐diphenylethylenediamine, 1,10‐phenanthroline, 1,8‐diaminonaphthalene, o‐phenylenediamine and 1,2‐diaminocyclohexane, respectively. The catalytic effects for hydrogenation of acetophenone of these compounds were tested. This revealed very poor or no catalytic effects of these complexes in transfer hydrogenation of acetophenone using isopropanol or HCOOH? NEt₃ as hydrogen source. However, they presented much better catalytic effects in ionic hydrogenation of acetophenone using H₂ gas as hydrogen source with a dependence of the catalytic effects on the base used in the hydrogenation reactions. The complexes represent a kind of green hydrogenation catalyst, although the conversion in the hydrogenation reactions is not as high as expected. Copyright © 2010 John Wiley & Sons, Ltd.     

Functionalized Periodic Mesoporous Organosilica: A Highly Enantioselective Catalyst for the Michael Addition of 1,3‐Dicarbonyl Compounds to Nitroalkenes

A functionalized periodic mesoporous organosilica with incorporated chiral bis(cyclohexyldiamine)‐based Ni^II complexes within the silica framework was developed by the co‐condensation of (1R,2R)‐cyclohexyldiamine‐derived silane and ethylene‐bridge silane, followed by the complexation of NiBr₂ in the presence of (1R,2R)‐N,N′‐dibenzylcyclohexyldiamine. Structural characterization by XRD, nitrogen sorption, and TEM disclosed its orderly mesostructure, and FTIR and solid‐state NMR spectroscopy demonstrated the incorporation of well‐defined single‐site bis(cyclohexyldiamine)‐based Ni^II active centers within periodic mesoporous organosilica. As a chiral heterogeneous catalyst, this functionalized periodic mesoporous organosilica showed high catalytic activity and excellent enantioselectivity in the asymmetric Michael addition of 1,3‐dicarbonyl compounds to nitroalkenes, comparable to those with homogeneous catalysts. In particular, this heterogeneous catalyst could be recovered easily and reused repeatedly up to nine times without obviously affecting its enantioselectivity, thus showing good potential for industrial applications.     

Desymmetrization of meso diols using enantiopure zinc (II) dimers: Synthesis and chiroptical properties

The one‐pot metal templated synthesis of enantiopure binuclear Zn (II) complexes Zn₂L¹–Zn₂L⁴ were obtained by treating (1R,2R)‐diphenylethylenediamine or (1S,2S)‐diphenylethylenediamine with 2‐hydroxy‐5‐methyl‐1,3‐benzenedicarboxaldehyde or 4‐tert‐butyl‐2,6‐diformylphenol and zinc acetate. The chiroptical properties of the complexes were studied by using circular dichroism spectroscopy. These ΔΔ and ΛΛ complexes were used as enantioselective catalysts for desymmetrization of meso diol to achieve monobenzoylated product with 96% yield and 88% ee.     

Stereoselective Interaction between DNA and Stable Chiral Surfaces Modified with 1,2‐Diphenylethylenediamine Enantiomers

This work described an interesting phenomenon of the stereoselective adsorption behaviors of DNA on stable chiral surfaces which were modified with 1,2‐diphenylethylenediamine enantiomers on gold electrodes. The modification process and electrochemical characterization of the chiral surfaces were measured by cyclic voltammetry (CV). The stereoselective adsorption behaviors of DNA on the two chiral surfaces were investigated via atomic force microscopy (AFM), CV, electrochemical impedance spectroscopy (EIS) and quartz crystal microbalance (QCM). All results confirmed that (1R,2R)‐1,2‐diphenylethylenediamine modified surface had stronger interaction with DNA molecules than (1S,2S)‐1,2‐diphenylethylenediamine modified surface, and the chirality of the surfaces created an different effect on the morphology and adsorption quantity of DNA.     

基于杯[4]芳烃的对N-乙酰基-天冬氨酸盐对映选择性识别的荧光传感器

合成了携带有丹磺酰基荧光团和（1R,2R）- 或（1S,2S）-1,2-二苯基乙二胺键合单元的双臂杯[4]芳烃手性阴离子受体（1和2）。通过荧光光谱检测了受体对手性氨基酸阴离子的键和能力。非线型曲线拟合的结果表明受体（1或2）与N-乙酰基-L或D－天冬氨酸盐通过多重氢键的相互作用形成了1：1的络合物。并且展现了对N-乙酰基天冬氨酸盐对映体良好的对映选择性的荧光识别（受体1： K_ass(D)/ K_ass(L)=6.74;受体2： K_ass(L)/ K_{ass (D)}=6.48）。明显不同的荧光响应说明受体1和2能被用作为对N-乙酰基天冬氨酸盐的荧光化学传感器。