质子化甜菜碱阳离子与双三氟甲磺酰亚胺阴离子相互作用的理论研究

利用密度泛函理论(DFT)方法, 在B3LYP/6-311＋G(d,p)水平下, 对质子化甜菜碱阳离子与双三氟甲磺酰亚胺阴离子形成的气态阴阳离子对([Hbet][Tf₂N])进行理论研究, 通过几何结构优化和频率分析得到势能面上的六个稳定构型. 计算结果表明[Hbet]^＋和[Tf₂N]^－之间能够形成较强的氢键相互作用, 氢键相互作用的稳定化能主要来源于[Tf₂N]^－中O, N原子的孤对电子和[Hbet]^＋中参与形成氢键的O-H, C-H反键轨道之间的相互作用. 自然布局分析(NPA)给出气态[Hbet][Tf₂N]离子对中阴阳离子间的电荷转移比传统离子液体中电荷转移的数值小. AIM (atoms in molecules)分析得到[Hbet]^＋和[Tf₂N]^－之间的氢键相互作用以静电作用为主. 通过实验和理论结果相比较, 初步探讨影响离子液体熔点及其对金属离子选择性溶解的结构因素.     

反气相色谱法表征离子液体1-己基-3-甲基咪唑四氟硼酸盐的热力学参数

采用反气相色谱法(IGC)表征了离子液体(IL)1-己基-3-甲基咪唑四氟硼酸盐([HMIM]BF₄)在343.15~373.15 K温度范围内的热力学参数.使用了一系列不同化学结构的探针分子测定[HMIM]BF₄与溶剂之间的相互作用力.根据探针分子的保留时间计算得到探针分子与[HMIM]BF₄之间的Flory-Huggins相互作用参数、摩尔吸附焓、无限稀释摩尔混合焓、摩尔蒸发焓、无限稀释活度系数以及[HMIM]BF₄的溶解度参数.结果表明,n-C₆、n-C₇、n-C₈、n-C₉、乙醚、四氢呋喃、苯、环己烷为[HMIM]BF₄的不良溶剂;甲苯、间二甲苯、甲醇、乙醇、二氯甲烷、四氯化碳、氯仿、丙酮、乙酸乙酯、乙酸甲酯为[HMIM]BF₄的良溶剂.运用外推法得到了[HMIM]BF₄在室温(298.15K)时的溶解度参数为23.70 (J·^-3)^0.5.实验结果证明反气相色谱法是一种简便准确的获得离子液体热力学参数的方法.获得的热力学参数体现了这种离子液体与探针分子之间的相互作用力.本研究为离子液体的进一步应用提供了参考.     

FLiNaK–ThF4的微观结构及热力学性质的深度势能分子动力学研究

钍基熔盐堆是六种第四代先进反应堆之一,深入研究熔盐堆燃料的基础物性对反应堆的安全有效运行和乏燃料后处理意义重大.首先,使用深度神经网络对FLiNaKTh熔盐燃料的力场进行了深度学习,得到了高精度的力场模型.其次,系统研究了FLiNaKTh燃料的配位结构、热力学和动力学性质.径向分布函数和平均力势表明各离子对的相互作用强弱为:Th–F>Li–F>Na–F>K–F,且均随ThF₄浓度增大或升温而变弱.在燃料服役温度900 K下,FLiNaK–10 wt.%ThF₄体系中Th离子主要以[ThF_x]^4–x形式存在,Th浓度增大有利于Th离子间形成团簇,导致[Th₂F_x]^8–x和[Th₃F_x]^12–x等占比增大.模拟的扩散系数、热容和密度值与实验值吻合的很好,证明了力场的精确性,进一步预测了0～50wt.%ThF₄浓度范围和更多温度下熔盐体...     

溶液中杯[4]芳烃双冠-6与Cs~+配位化学研究

研究了溶液中杯[4]芳烃双冠-6(BisC₆)与Cs⁺配位行为.常温下,BisC₆/NPME(邻硝基苯甲醚)体系单级萃铯百分率达99.36%,模拟料液中,Cs⁺/Na⁺和Cs⁺/K²⁺分离系数分别为3.92×10⁴和2.21×10⁴.局域结构模型实验表明,配合物分子中可能存在水或(和)硝酸(根).ESI-MS谱表明,NPME体系中,铯离子与BisC₆同时形成1:1(单核)和2:1(双核)的配合物,并且存在[BisC₆·H₂O],[BisC₆·Cs⁺]⁺,[BisC₆·2Cs⁺·H₂O]₂+和[BisC₆·2Cs₁₀⁺·No₁₀^-3]10⁺等多种配合物分子.EXAFS实验表明,溶液中铯离子的配位数为7,形成7个氧配位的稳定结构,ADF计算验证了EXAFS实验结果.     

二苯并噻吩及其氧化物与离子液体相互作用的理论研究

采用密度泛函理论方法比较了DBT/DBTO₂和[BMIM]⁺[PF₆]^-/[BMIM]⁺[BF₄]^-的相互作用。对最稳定的[BMIM]⁺[PF₆]^-、[BMIM]⁺[PF₆]^--DBT、[BMIM]⁺[PF₆]^--DBTO₂、[BMIM]⁺[BF₄]^-、[BMIM]⁺[BF₄]^--DBT、[BMIM]⁺[BF₄]^--DBTO₂进行了NBO和AIM分析。结果表明,DBT和[BMIM]⁺[PF₆]^-/[BMIM]⁺[BF₄]^-中的咪唑环彼此相互平行,NBO和AIM分析表明它们之间发生了π-π相互作用。H1'和H9'形成的F…H氢键有利于π-π堆积作用的形成。DBTO₂倾向于趋近C2-H2和甲基基团形成O…H相互作用;DBTO₂优先吸附在[BMIM]⁺[PF₆]^-/[BMIM]⁺[BF₄]^-。在模拟油中,[BMIM]⁺[PF₆]^-和[BMIM]⁺[BF₄]^-离子液体对DBTO₂的萃取能力大于DBT,其原因是可能是DBTO₂具有较大的极性和O…H与F…H的氢键作用。     

离子液体[bmim][PF6]与[moemim][PF6]结构微不均匀性以及微粘度的光谱探测

室温离子液体由于其极低的蒸汽压、比较好的热稳定性和化学稳定性、良好的分子结构与性能的可设计性等优点,作为一种新型的环境友好溶剂在很多领域有着广泛的应用.对于离子液体的微观结构和微观性能的研究是设计新型离子液体以及扩展离子液体应用的关键.本文通过荧光探针分子香豆素153(C153)的转动动力学和对微观环境敏感的荧光探针分子1, 3-二(1-芘基)丙烷(BPP)的稳态荧光光谱,探测和表征了烷基取代的离子液体1-丁基-3-甲基咪唑六氟磷酸盐([bmim][PF₆])和与其具有相似结构的醚键官能化的离子液体1-甲氧基乙基-3-甲基咪唑六氟磷酸盐([moemim][PF₆])的微观结构和微粘度. C153探针分子在离子液体[bmim][PF₆]中的转动过程具有快、慢两个组分表明离子液体[bmim][PF₆]内部存在松散和紧密的两种结构微区;而C153探针分子在离子液体[moemim][PF₆]中的转动动力学只存在一种过程,说明醚键的引入使得[moemim][PF₆]内部趋于一种类型的微环境.通过C153探针分子的转动时间研究发现,醚键官能化的离子液体[moemim][PF₆]的微粘度小于烷基链取代的离子液体[bmim][PF₆],同时通过BPP探针分子的二聚体激基复合物(excimer)与单体(monomer)荧光发射强度的比值(I_E/I_M)研究也证明这一结果.醚键的引入使得离子液体[moemim][PF₆]相对于离子液体[bmim][PF₆],侧链的极性更大、柔顺性更好,同时醚键有可能作为氢键的受体与阳离子形成氢键从而削弱离子液体中阴、阳离子间的相互作用,使得离子液体[moemim][PF₆]的微观环境比离子液体[bmim][PF₆]更为均一,同时具有更小的微粘度.     

对位取代酚钾与10′10′-二烃基-9,9′-联二吖啶盐电荷转移光谱的研究

10,10′-二烃基-9, 9′-联二吖啶盐有很强的荧光, 在光学材料^[1]和重金属离子的分析^[2]中有重要的应用价值。     

吡啶离子液体[BPy][BF4]与乙腈混合体系中杜醌的光化学反应动力学

用激光闪光光解方法研究了杜醌(DQ)在吡啶型离子液体N-丁基吡啶四氟硼酸盐([BPy][BF₄])与乙腈(MeCN)组成的共混溶剂中的光化学反应机理与动力学. 实验结果表明, 离子液体[BPy][BF₄]对混合体系中杜醌激发三线态(³DQ^*)的瞬态吸收峰位置和吸光度大小都没有产生明显影响. 在N₂饱和条件下, 无论是在乙腈溶液中还是在[BPy][BF₄]/MeCN混合溶液中³DQ^*的衰减都遵循一级反应动力学规律. 而[BPy][BF₄]的存在对³DQ^*与三乙胺(TEA)之间的电子转移影响显著. 随着[BPy][BF₄]/MeCN 体系中离子液体比例的增加, 杜醌三线态³DQ^*与TEA间的瞬态反应机理没有改变, 但它们之间的光诱导电子转移反应速率和生成自由基的量子产额逐渐降低, 通过改变离子液体的比例可以调节该体系中光诱导电子转移反应的速率和效率.     

过渡金属吡啶配离子的TCNQ电荷转移盐的合成和物理性质

合成了通式为[M(Py)_m][TCNQ]_n(M=Mn,m＝4;M＝Co,Ni,Cu,m＝2;TCNQ＝7,7,8,8-四氰基对苯醌二甲烷,n＝2,3)的8个过渡金属吡啶配离子的TCNQ电荷转移盐,通过元素分析、红外光谱、顺磁共振谱、光电子能谱、磁化率和电导率对这些电荷转移盐进行了表征,结果表明,在这些电荷转移盐分子中存在TCNQ^-和TCNQ⁰,且TCNQ^-与TCNQ⁰相互作用形成结构单元[TCNQ]_n^2-(n＝2,3),各个结构单元沿一维方向堆积形成分子柱,部分电荷从[TCNQ]_n^2-向[M(Py)_m]²⁺转移,导致化合物中的金属表现为混合价态.其中3个电荷转移盐具有良好的导电性.     

反气相色谱测定非对称双阳离子型离子液体的溶解度参数

在343.15~363.15 K下采用反气相色谱法对实验室合成的3种非对称双阳离子型离子液体[PyC₅Pi]NTf₂]₂、[MpC₅Pi]NTf₂]₂和[PyC₆Pi]NTf₂]₂的溶解度参数进行了测定。以正辛烷、正癸烷、正十二烷、正十四烷和正十六烷作为探针溶剂,计算了在不同温度下探针溶剂在3种离子液体中的特性保留体积(V_g⁰)、摩尔吸收焓(ΔH₁^S)、无限稀释摩尔混合焓(ΔH_l^∞)、摩尔蒸发焓(ΔH_v)、无限稀释活度系数(Ω₁^∞)以及探针溶剂与3种离子液体的Flory-HuggirIs相互作用参数(χ₁₂^∞),得到了室温下3种离子液体的溶解度参数(δ₂)为28.52~32.66 (J·cm^-3)^1/2。分子结构中含有4-甲基吗啉比含有吡啶时溶解度参数更大。随着两个阳离子间连接基碳数的增加,溶解度参数增大。这一结果对研究离子液体的溶液性质和应用有指导作用。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.