An in situ GISAXS study of selective solvent vapor annealing in thin block copolymer films: Symmetry breaking of in-plane sphere order upon deswelling

Thin films of asymmetric poly(styrene-b-4-vinylpyridine) (PS-b-P4VP) block copolymers are studied by means of in situ grazing-incidence small-angle X-ray scattering (GISAXS) during solvent vapor annealing in tetrahydrofuran, a solvent selective for the PS majority block of the copolymer. Upon swelling, PS-b-P4VP block copolymers form hexagonal arrays of spherical P4VP microdomains in a PS matrix in films 7–9 layers thick. Deswelling the films induces a transition from hexagonal to face-centered orthorhombic (fco) symmetry, which is stable only at ∼7 layers of spherical microdomains. Dry films show co-existing hexagonal and orthorhombic symmetries when the solvent is removed slowly, whereas instantaneous solvent removal suppresses the fco structure, resulting in films with only hexagonal structure. The in-plane order of microdomains is significantly deteriorated in dry films independent of the solvent removal rate.Spherical block copolymer microdomains are known to undergo a transition from hexagonal to orthorhombic packing in isothermally annealed thin films when the number of sphere layers is increased from 4 to 5. In this paper, in situ GISAXS experiments reveal that a similar transition occurs during solvent vapor annealing in a selective solvent. Interestingly, the transition from hexagonal to orthorhombic packing of spheres occurs as solvent is removed from a thin block copolymer film. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 331–338     

Reversible Morphology Control in Block Copolymer Films via Solvent Vapor Processing: An In Situ GISAXS study

The real time changes occurring within films of cylinder-forming poly(α-methylstyrene-block-4-hydroxystyrene) (PαMS-b-PHOST) were monitored as they were swollen in tetrahydrofuran (THF) and acetone solvent vapors. In situ information was obtained by combining grazing incidence small angle X-ray scattering (GISAXS) with film thickness monitoring of the solvent vapor swollen films. We show that for self assembly to occur, the polymer thin film must surpass a swollen thickness ratio of 212% of its original thickness when swollen in THF vapors and a ratio of 268% for acetone vapor annealing. As the polymer becomes plasticized by solvent vapor uptake, the polymer chains must become sufficiently mobile to self assemble, or reorganize, at room temperature. Using vapors of a solvent selective to one of the blocks, in our case PHOST-selective acetone, an order-order transition occured driven by the shift in volume fraction. The BCC spherical phase assumed in the highly swollen state can be quenched by rapid drying. Upon treatment with vapor of a non-selective solvent, THF, the film maintained the cylindrical morphology suggested by its dry-state volume fraction. In situ studies indicate that self-assembly occurs spontaneously upon attaining the threshold swelling ratios.     

Controlled chemical stabilization of self-assembled PS-P4VP nanostructures

Supramolecular self-assemblies in selective solvents give rise to many patterning possibilities. The diblock copolymer polystyrene-b-poly(4-vinylpyridine) (PS-P4VP) is one such polymer that self-assembles into neat nanostructures in toluene. These nanostructures once formed are highly susceptible to solvent influence. Unfortunately, for use as nanotemplates and in the synthesis of nanoparticles, the susceptibility of the films to solvents can be a problem. In this study, we present a method to stabilize the structures through chemical means in solution. We used 1,4-dibromobutane in solution to chemically crosslink the pyridine residues of each of PS-P4VP to yield a series of stable spherical aggregates. In this way, the cross-linking ratio can be precisely controlled. The solution properties were studied using dynamic light scattering and small angle X-ray scattering and the morphology of the resulting micellar film was studied using transmission electron microscopy (TEM). The size of the micelles formed was found to be dependent on the amount of cross-linking and the shape of the PS-P4VP micelles remains stable when exposed to a selective solvent for PS.     

Temperature-triggered micellization of block copolymers on an ionic liquid surface

In situ neutron reflectivity was used to study thermally induced structural changes of the lamellae-forming polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) block copolymer thin films floating on the surface of an ionic liquid (IL). The IL, 1-butyl-3-methylimidazolium trifluoromethanesulfonate, is a nonsolvent for PS and a temperature-tunable solvent for P2VP, and, as such, micellization can be induced at the air-IL interface by changing the temperature. Transmission electron microscopy and scanning force microscopy were used to investigate the resultant morphologies of the micellar films. It was found that highly ordered nanostructures consisting of spherical micelles with a PS core surrounded by a P2VP corona were produced. In addition, bilayer films of PS homopolymer on top of a PS-b-P2VP layer also underwent micellization with increasing temperature but the micellization was strongly dependent on the thickness of the PS and PS-b-P2VP layers.     

Ordered reactive nanomembranes/nanotemplates from thin films of block copolymer supramolecular assembly

We report on a unique, very simple method of preparation of reactive membranes and nanotemplates with nanoscopic cylindrical channels on the surface of various inorganic and polymeric substrates. Well-ordered nanostructured thin polymer films have been fabricated from the supramolecular assembly of poly(styrene-block-4-vinylpyridine) (PS-PVP) and 2-(4'-hydroxybenzeneazo)benzoic acid (HABA), consisting of cylindrical nanodomains formed by PVP-HABA associates surrounded by PS. Alignment of the domains has been shown to be switched upon exposure to vapors of different solvents from the parallel to perpendicular orientation to the confining surface and vice versa. The alignment of the cylindrical nanodomains is insensitive to the composition of the confining surface due to the self-adaptive behavior of the supramolecular PVP-HABA assembly. Extraction of HABA with selective solvent results in nanomembranes with a hexagonal lattice (24 nm in the period) of hollow channels of 8 nm in the diameter crossing the membrane from the top to the bottom. The walls of the channels are constituted from reactive PVP chains. The channels were filled with Ni clusters via the electrodeposition method to fabricate the ordered array of metallic nanodots of 1.2 tera per cm(2).     

Micellar structures of poly(styrene-b-4-vinylpyridine)s in THF/toluene mixtures and their functionalization with gold

The effects of the block copolymer composition and the solvent selectivity on the micellar morphologies of poly(styrene- b-4-vinylpyridine)s (PS- b-P4VPs) and their functionalizations with gold were studied in 10 mg/mL solutions using small-angle X-ray scattering and transmission electron microscopy (TEM). The solvent selectivity for the PS block was controlled by toluene/tetrahydrofuran (THF) mixtures in which toluene and THF are selective for PS and nonselective, respectively. The micellar structure was strongly dependent on phi (wt % toluene in toluene/THF mixture) and the composition of the block copolymers. PS(12K)- b-P4VP(11.8K) (symmetric) showed spherical micelles in the entire range of phi except phi = 0 (THF, nonselective solvent). PS(3.3K)- b-P4VP(18.7K) (asymmetric, longer P4VP) showed multiple morphologies with transitions from spheres to cylinders and finally to vesicles with an increase in phi. PS(19.6K)- b-P4VP(5.1K) (asymmetric, longer PS) showed spherical micelles only at the narrow ranges of 90 wt % 相似文献   

Temperature tunable micellization of polystyrene-block-poly(2-vinylpyridine) at Si-ionic liquid interface

Highly ordered and stable micelles formed from both symmetric and asymmetric block copolymers of polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) at the Si-ionic liquid (IL) interface have been investigated by scanning force microscopy (SFM) and transmission electron microscopy (TEM). The 1-butyl-3-methylimidazolium trifluoromethanesulfonate IL, a selective and temperature-tunable solvent for the P2VP block, was used and gave rise to block copolymer micelles having different morphologies that strongly depended on the annealing temperature. The effects of film thickness, molecular weight of block copolymers, and experimental conditions, such as preannealing, rinsing, and substrate properties, on the morphologies of block copolymer micelles were also studied. In addition, spherical micelles consisting of PS core and P2VP shell could also be obtained by core-corona inversion by annealing the as-coated micellar film in the IL at high temperatures. The possible mechanism for micelle formation is discussed.     

PI-b-PMMA diblock copolymers: nanostructure development in thin films and nanostructuring of thermosetting epoxy systems

Poly(isoprene-block-methyl methacrylate) (PI-b-PMMA) block copolymers with different block ratios have been used to generate nanostructures both in thin films and by nanostructuring a thermosetting epoxy system. Obtained morphologies have been analyzed in terms of atomic force microscopy. The nanostructuring of thin films was carried out by thermal and solvent vapor annealing, in which the copolymer films were exposed to acetone vapors, selective solvent for methyl methacrylate (PMMA) block. By solvent vapor annealing thin films of both copolymers self-assembled into a hexagonally packed cylindrical morphology. Thermal annealing was carried out above the glass transition temperature of both blocks, obtaining worm-like and lamellar morphologies, depending on the block ratio. One of the copolymers has also been used for nanostructuring an epoxy thermosetting system. Morphologies consisting of spherical-shaped PI domains dispersed in a continuous epoxy matrix in which PMMA remained miscible were obtained, independently of the copolymer amount.     

Selective swelling induced pore generation of amphiphilic block copolymers: The role of swelling agents

Swelling of block copolymers by selective solvents has emerged as an extremely simple and efficient process to produce nanoporous materials with well‐controlled porosities. However, the role of the swelling agents in this pore‐making process remains to be elucidated. Here we investigate the evolution of morphology, thickness, and surface chemistry of thin films of polystyrene‐block‐poly (2‐vinyl pyridine) (PS‐b‐P2VP) soaked in a series of alcohols with changing carbon atoms and hydroxyl groups in their molecules. It is found that, in addition to a strong affinity to the dispersed P2VP microdomains, the swelling agents should also have a moderate swelling effect to PS to allow appropriate plastic deformation of the PS matrix. Monohydric alcohols with longer aliphatic chains exhibit stronger ability to induce the pore formation and a remarkable increase in film thickness is associated with the pore formation. High‐carbon alcohols including n‐propanol, n‐butanol, and n‐hexanol produce cylindrical micelles upon prolonged exposure for their strong affinity toward the PS matrix. In contrast, methanol and polyhydric alcohols including glycol and glycerol show very limited effect to swell the copolymer films as their affinity to the PS matrix is low; however, they also evidently induce the surface segregation of P2VP blocks. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 926–933     

Ordering evolution of block copolymer thin films upon solvent-annealing process

Morphologies of polystyrene-block-poly(2-vinylpyridine) copolymer (S2VP) thin films, which are forming poly(2-vinylpyridine) cylinders in bulk phase, were investigated by atomic force microscopy (AFM) and transmission electron microscopy (TEM) to account for their ordering behavior induced by solvent annealing. Initially, when the copolymer was dissolved in toluene, which is selective solvent for majority polystyrene (PS) blocks, and was spin-coated on Si substrates, dimple-type micellar structures of S2VP were formed. After the film was placed in a solvent-annealing chamber covered with a lid under the existence of chloroform, surface morphologies of S2VP were measured as a function of annealing time. In this study, it was found that the morphologies of S2VP thin film repeated the cycle of the creation and extinction of various morphologies on ordering process. Namely, S2VP exhibited the various transformations between different morphologies, including highly disordered state, cylinders normal to the plane, and cylinders parallel to the plane. Each of the morphologies observed here was employed as a template to synthesize gold (Au) nanoparticles or nanowires. The arrays of Au nano-objects were used to tune a surface plasmon resonance.     

Responsive polymer/gold nanoparticle composite thin films fabricated by solvent-induced self-assembly and spin-coating

Self-assembled poly(4-vinylpyridine)-grafted gold (Au) nanoparticles (NPs) and polystyrene-b-poly(4-vinylpyridine) block copolymers were fabricated by the introduction of a selective solvent to a common solution. The assembled mixtures were spin-coated onto solid substrates to fabricate composite gold/polymer thin films composed of copolymer-hybridized Au NPs and independent copolymer micelles. The obtained composite Au thin films had variable localized surface plasmon resonance (LSPR) bands and microscopic morphologies upon vapor annealing with selective solvents because the adsorption and dissolving of solvent molecules into the films could rearrange the copolymer block. The hybrid nanostructured Au thin films may have potential in vapor sensing and organic assays.     

The preparation and characterization of the cross-linked spherical, cylindrical, and vesicular micelles of poly(styrene-b-isoprene) diblock copolymers

PI cores of the micelles of poly(styrene-b-isoprene) (PS-b-PI) diblock copolymers, in PS selective solvents, were cross-linked with sulfur monochloride (S2Cl2). The cross-linked micellar structure was maintained after dialysis in THF (neutral solvent) and did not change during heating. Cross-linking brought about the opportunity for TEM images in a solution state; otherwise, the micellar structure would be destroyed (or changed) during the evaporation of the solvent on a carbon-coated copper grid. The Flory interaction parameter, chi, between the PI block and the solvent was controlled by mixing two selective solvents (DMP/toluene, DMP/DEP and DEP/DBP) which have different degrees of selectivity for the PS block, as well as heating the solutions. Two block copolymers, PS(7.2K)-b-PI(7.8K) and PS(5.5K)-b-PI(18.8K), were studied in order to clarify the effects of the relative chain length of each block on the micelle structure in the selective solvents. PS(7.2K)-b-PI(7.8K), which is nearly symmetric, showed only spherical micelles in the DMP/toluene mixture. The basic spherical micellar shape of PS(7.2K)-b-PI(7.8K) did not change with chi, while the size and aggregation number of the micelles increased as chi increased until 2.05 and then were saturated after that. PS(5.5K)-b-PI(18.8K), which is asymmetric, showed a structural change from spherical to cylindrical to vesicular micelles with an increase in the selectivity of the DMP/DEP and DEP/DBP mixtures (which was also confirmed by TEM and SAXS studies). Giant vesicular micelles with a diameter of approximately 2.5 microm were observed in high-selectivity solvents. The size of the vesicular micelle seemed to decrease as selectivity decreased. The systematic changes of the micellar structures of PS(5.5K)-b-PI(18.8K), via changes in solvent selectivity, could be demonstrated through TEM images, which were prepared by evaporating the solvent of the cross-linked micellar solution onto the carbon-coated grid after dialysis.     

Photoactive additives for cross-linking polymer films: Inhibition of dewetting in thin polymer films

In this report, we describe a versatile photochemical method for cross-linking polymer films and demonstrate that this method can be used to inhibit thin polymer films from dewetting. A bifunctional photoactive molecule featuring two benzophenone chromophores capable of abstracting hydrogen atoms from various donors, including C-H groups, is mixed into PS films. Upon exposure to UV light, the bis-benzophenone molecule cross-links the chains presumably by hydrogen abstraction followed by radical recombination. Photoinduced cross-linking is characterized by infrared spectroscopy and gel permeation chromatography. Optical and atomic force microscopy images show that photocrosslinked polystyrene (PS) thin films resist dewetting when heated above the glass transition temperature or exposed to solvent vapor. PS films are inhibited from dewetting on both solid and liquid substrates. The effectiveness of the method to inhibit dewetting is studied as a function of the ratio of cross-linker to macromolecule, duration of exposure to UV light, film thickness, the driving force for dewetting, and the thermodynamic nature of the substrate.     

Cooperative Self‐Assembly‐Assisted Formation of Monodisperse Optically Active Spherical and Anisotropic Nanoparticles

We report a new method in which spontaneous self‐assembly is employed to synthesize monodisperse polymer nanoparticles with controlled size (<50 nm), shape, tunable functionality, and enhanced solvent and thermal stability. Cooperative noncovalent interactions, such as hydrogen bonding and aromatic π–π stacking, assist self‐assembly of amphiphilic macromolecules (polystyrene‐block‐polyvinylpyridine, PS? PVP) and structure directing agents (SDAs) to form both spherical and anisotropic solid polymer nanoparticles with SDAs residing in the particle core surrounded by the polymers. Through detailed investigations by scanning electron microscopy and transmission electron microscopy (TEM), we have rationalized nanoparticle morphology evolution and dependence on factors such as SDA concentration and PVP size. By keeping the PS chain size constant, the particle morphology progresses from continuous films to spherical particles, and on to cylindrical nanowires or rods with increasing the PVP chain size. The final nanoparticles are very stable and can be redispersed in common solvents to form homogenous solutions and thin films of ordered nanoparticle arrays through solvent evaporation processes. These nanoparticles exhibit tunable fluorescent colors (or emissions) depending on the choices of the central SDAs. Our method is simple and general without requiring complicated synthetic chemistry, stabilizing surfactants, or annealing procedures (e.g., temperature or solvent annealing), making scalable synthesis feasible.     

The morphology and structure of PS‐b‐P4VP block copolymer films by solvent annealing: effect of the solvent parameter

Lamellae (symmetric) forming polystyrene‐b‐poly(4‐vinylpyridine) (PS‐b‐P4VP) block copolymers (BCPs) were used to produce nanostructured thin films by solvent (toluene) casting (spin‐coating) onto silicon substrates. As expected, strong micellization of PS‐P4VP in toluene results in poorly ordered hexagonally structures films. Following deposition the films were solvent annealed in various solvents and mixtures thereof. A range of both morphologies including micelle and microphase separated structures were observed. It was found that nanostructures typical of films of regular thickness (across the substrate) and demonstrating microphase separation occurred only for relatively few solvents and mixtures. The data demonstrate that simple models of solvent annealing based on swelling of the polymer promoting higher polymer chain mobility are not appropriate and more careful rationalization is required to understand these data. Analysis suggests that regular phase separated films can only be achieved when the copolymer Hildebrand solubility parameter is very similar to the value of the solvent. It is suggested that the solvent anneal method used is best considered as a liquid phase technique rather than a vapor phase method. The results show that solvent annealing methods can be a very powerful means to control structure and in some circumstances dominate other factors such as surface chemistry and surface energies. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation of polymeric vesicles through ultrasonic treatment of poly(styrene‐block‐2‐vinylpyridine) micelles under alkaline conditions

An approach for the preparation of block copolymer vesicles through ultrasonic treatment of polystyrene‐block‐poly(2‐vinyl pyridine) (PS‐b‐P2VP) micelles under alkaline conditions is reported. PS‐b‐P2VP block copolymers in toluene, a selective solvent for PS, form spherical micelles. If a small amount of NaOH solution is added to the micelles solution during ultrasonic treatment, organic‐inorganic Janus‐like particles composed of the PS‐b‐P2VP block copolymers and NaOH are generated. After removal of NaOH, block copolymer vesicles are obtained. A possible mechanism for the morphological transition from spherical micelles to vesicles or Janus‐like particles is discussed. If the block copolymer micelles contain inorganic precursors, such as FeCl₃, hybrid vesicles are formed, which may be useful as biological and chemical sensors or nanostructured templates. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 953–959     

Solvent vapor mediated polymer adsorption in thin films

The effectiveness of a "solvent annealing" process was investigated for thin (approximately 150 nm) polystyrene films, in which the diffusion and reorganization of polymer chains were mediated by the controlled absorption of cyclohexane vapor. Results were compared with conventional "thermal annealing" of films under vacuum above the glass transition temperature. Elastic recoil detection analysis (ERDA) was used to determine the surface excesses of fluorocarbon end-capped polystyrene (hPSF) and poly(styrene-b-dimethylsiloxane) (hPS-PDMS) in deuterated polystyrene (dPS) films. Both annealing methods enabled diffusion of the surface-active polymers; however, only thermal annealing gave rise to a surface excess in hPSF/dPS films. The inhibition ofhPSF adsorption under solvent annealing was due to the low surface tension of cyclohexane. In contrast, hPS-PDMS, having a larger surface-active group than that of hPSF, was found in excess at the air surface under solvent annealing, and surface excesses were consistent with the formation of saturated monolayers in blended films. The mixing of hPS-PDMS with dPS was inhibited by the unfavorable interaction between the PDMS block of the copolymer and the homopolymer. The slow interdiffusion of hPS-PDMS in dPS is consistent with the formation of micelles, and the formation of an excess layer at the air surface may be kinetically inhibited by the rate of dissociation of hPS-PDMS micelles.     

One-step route to the fabrication of highly porous polyaniline nanofiber films by using PS-b-PVP diblock copolymers as templates

We report a new method to control both the nucleation and growth of highly porous polyaniline (PANI) nanofiber films using porous poly(styrene-block-2-vinylpyridine) diblock copolymer (PS-b-P2VP) films as templates. A micellar thin film composed of P2VP spheres within a PS matrix is prepared by spin coating a PS-b-P2VP micellar solution onto substrates. The P2VP domains are swollen in a selective solvent of acetic acid, which results in the formation of pores in the block copolymer film. PANI is then deposited onto the substrates modified with such a porous film using electrochemical methods. During the deposition, the nucleation and growth of PANI occur only at the pores of the block copolymer film. After the continued growth of PANI by the electrochemical deposition, a porous PANI nanofiber film is obtained.     

Ordered complex nanostructures from bimodal self-assemblies of diblock copolymer micelles with solvent annealing

We report the formation of ordered complex nanostructures from single-layered films of mixtures of polystyrene-poly(2-vinylpyridine) (PS-P2VP) and polystyrene-poly(4-vinylpyridine) (PS-P4VP) diblock copolymer micelles by THF (tetrahydrofuran) annealing. We first examined the influence of THF vapor on PS-P2VP and PS-P4VP micelles in their single-layered films. Due to the different solubility of PS-P2VP and PS-P4VP copolymers in THF, a hexagonal array of PS-P2VP micelles was changed into cylindrical nanodomains, but that of PS-P4VP micelles was not changed. The different influence of THF on PS-P2VP and PS-P4VP micelles was combined in single-layered films of mixtures of both micelles. For the purpose, we prepared mixture solutions of independently prepared small PS-P2VP and large PS-P4VP micelles. Then, bimodal self-assemblies of micelles were prepared from the mixtures, for which the hexagonal array of large PS-P4VP micelles was surrounded by small PS-P2VP micelles. When the bimodal self-assembly was annealed by THF vapor, PS-P2VP micelles were transformed into cylindrical nanodomains, but their reorganization was guided by hexagonally arranged PS-P4VP micelles. As a result, we were able to produce ordered complex nanostructures in the form of a hexagonal array of PS-P4VP micelles surrounded by PS-P2VP cylinders, which was further utilized for the synthesis of Au nanoparticles.     

Control on the Morphology of ABA Amphiphilic Triblock Copolymer Micelles in Dioxane/Water Mixture Solvent

This work offers a typical understanding of the factors that govern the nanostructures of poly(4-vinyl pyridine)-b-polystyrene-bpoly(4-vinyl pyridine)(P4 VP-b-PS-b-P4 VP) block copolymers(BCs) in dioxane/water, in which water is a selective solvent for the P4 VP block. It is achieved through an investigation of the amphiphilic triblock copolymer micelles by variation of three different factors, including water content(above CWC but under the immobile concentration), temperature(ranging from 20 °C to 80 °C), and copolymer composition(low and high PS block length). Transition of bead-like micelles to vesicles is observed with the increase of water content due to the increase of interfacial energy between the copolymer and the solvent. Effect of temperature superposed on that of water content results in various morphologies, such as beads, fibers, rods, capsules, toroids, lamellae, and vesicles. The interfacial tension between the BC and the solvent increases with the increase of water content but decreases with the increase of temperature, indicating that the micellar morphologies are resulted from the competitive interplay between the temperature and the water content and always change in a direction that decreases the interfacial energy. Based on the micellar structures obtained in this work and the effects of temperature superposed on water concentration, a diagram of phase evolution of different micellar morphologies is illustrated here, covering the temperature range from 20 °C to 80 °C and the water content changing from 20 vol% to 35 vol%. For the investigation of BC composition, morphological transition of vesicle-to-fiber, for high PS length, is observed as compared with bead-to-capsule for low PS length, as the temperature changes from 20 °C to 80 °C. Our research complements the protocols to control over the morphologies and the phase diagram describing P4 VP-b-PS-b-P4 VP micellar nanostructures in aqueous solution.