Probing the effects of one-electron reduction and protonation on the electronic properties of the Fe-S clusters in the active-ready form of [FeFe]-hydrogenases. A QM/MM investigation

A QM/MM investigation of the active-ready (H(ox)) form of [FeFe]-hydrogenase from D. desulfuricans, in which the electronic properties of all Fe-S clusters (H, F and F') have been simultaneously described using DFT, was carried out with the aim of disclosing a possible interplay between the H-cluster and the accessory iron-sulfur clusters in the initial steps of the catalytic process leading to H(2) formation. It turned out that one-electron addition to the active-ready form leads to reduction of the F'-cluster and not of the H-cluster. Protonation of the H-cluster in H(ox) is unlikely, and in any case it would not trigger electron transfer from the accessory Fe(4)S(4) clusters to the active site. Instead, one-electron reduction and protonation of the active-ready form trigger electron transfer within the protein, a key event in the catalytic cycle. In particular, protonation of the H-cluster after one-electron reduction of the enzyme lowers the energy of the lowest unoccupied molecular orbitals localized on the H-cluster to such an extent that a long-range electron transfer from the F'-cluster towards the H-cluster itself is allowed.     

A QM/MM investigation of the activation and catalytic mechanism of Fe-only hydrogenases

Fe-only hydrogenases are enzymes that catalyze dihydrogen production or oxidation, due to the presence of an unusual Fe(6)S(6) cluster (the so-called H-cluster) in their active site, which is composed of a Fe(2)S(2) subsite, directly involved in catalysis, and a classical Fe(4)S(4) cubane cluster. Here, we present a hybrid quantum mechanical and molecular mechanical (QM/MM) investigation of the Fe-only hydrogenase from Desulfovibrio desulfuricans, in order to unravel key issues regarding the activation of the enzyme from its completely oxidized inactive state (Hoxinact) and the influence of the protein environment on the structural and catalytic properties of the H-cluster. Our results show that the Fe(2)S(2) subcluster in the Fe(II)Fe(II) redox state - which is experimentally observed for the completely oxidized form of the enzyme - binds a water molecule to one of its metal centers. The computed QM/MM energy values for water binding to the diferrous subsite are in fact over 70 kJ mol(-1); however, the affinity toward water decreases by 1 order of magnitude after a one-electron reduction of H(ox)(inact), thus leading to the release of coordinated water from the H-cluster. The investigation of a catalytic cycle of the Fe-only hydrogenase that implies formation of a terminal hydride ion and a di(thiomethyl)amine (DTMA) molecule acting as an acid/base catalyst indicates that all steps have reasonable reaction energies and that the influence of the protein on the thermodynamic profile of H(2) production catalysis is not negligible. QM/MM results show that the interactions between the Fe(2)S(2) subsite and the protein environment could give place to structural rearrangements of the H-cluster functional for catalysis, provided that the bidentate ligand that bridges the iron atoms in the binuclear subsite is actually a DTMA residue.     

Structural and electronic properties of the [FeFe] hydrogenase H-cluster in different redox and protonation states. A DFT investigation

The molecular and electronic structure of the Fe 6S 6 H-cluster of [FeFe] hydrogenase in relevant redox and protonation states have been investigated by DFT. The calculations have been carried out according to the broken symmetry approach and considering different environmental conditions. The large negative charge of the H-cluster leads, in a vacuum, to structures different from those observed experimentally in the protein. A better agreement with experimental data is observed for solvated complexes, suggesting that the protein environment could buffer the large negative charge of the H-cluster. The comparison of Fe 6S 6 and Fe 2S 2 DFT models shows that the presence of the Fe 4S 4 moiety does not affect appreciably the geometry of the [2Fe] H cluster. In particular, the Fe 4S 4 cluster alone cannot be invoked to explain the stabilization of the mu-CO forms observed in the enzyme (relative to all-terminal CO species). As for protonation of the hydrogen cluster, it turned out that mu-H species are always more stable than terminal hydride isomers, leading to the conclusion that specific interactions of the H-cluster with the environment, not considered in our calculations, would be necessary to reverse the stability order of mu-H and terminal hydrides. Otherwise, protonation of the metal center and H 2 evolution in the enzyme are predicted to be kinetically controlled processes. Finally, subtle modifications in the H-cluster environment can change the relative stability of key frontier orbitals, triggering electron transfer between the Fe 4S 4 and the Fe 2S 2 moieties forming the H-cluster.     

The electronic structure of the H-cluster in the [FeFe]-hydrogenase from Desulfovibrio desulfuricans: a Q-band 57Fe-ENDOR and HYSCORE study

The active site of the (57)Fe-enriched [FeFe]-hydrogenase (i.e., the "H-cluster") from Desulfovibrio desulfuricans has been examined using advanced pulse EPR methods at X- and Q-band frequencies. For both the active oxidized state (H(ox)) and the CO inhibited form (H(ox)-CO) all six (57)Fe hyperfine couplings were detected. The analysis shows that the apparent spin density extends over the whole H-cluster. The investigations revealed different hyperfine couplings of all six (57)Fe nuclei in the H-cluster of the H(ox)-CO state. Four large 57Fe hyperfine couplings in the range 20-40 MHz were found (using pulse ENDOR and TRIPLE methods) and were assigned to the [4Fe-4S](H) (cubane) subcluster. Two weak (57)Fe hyperfine couplings below 5 MHz were identified using Q-band HYSCORE spectroscopy and were assigned to the [2Fe](H) subcluster. For the H(ox) state only two different 57Fe hyperfine couplings in the range 10-13 MHz were detected using pulse ENDOR. An (57)Fe line broadening analysis of the X-band CW EPR spectrum indicated, however, that all six (57)Fe nuclei in the H-cluster are contributing to the hyperfine pattern. It is concluded that in both states the binuclear subcluster [2Fe](H) assumes a [Fe(I)Fe(II)] redox configuration where the paramagnetic Fe(I) atom is attached to the [4Fe-4S](H) subcluster. The (57)Fe hyperfine interactions of the formally diamagnetic [4Fe-4S](H) are due to an exchange interaction between the two subclusters as has been discussed earlier by Popescu and Münck [Popescu, C.V.; Münck, E., J. Am. Chem. Soc. 1999, 121, 7877-7884]. This exchange coupling is strongly enhanced by binding of the extrinsic CO ligand. Binding of the dihydrogen substrate may induce a similar effect, and it is therefore proposed that the observed modulation of the electronic structure by the changing ligand surrounding plays an important role in the catalytic mechanism of [FeFe]-hydrogenase.     

Modeling [Fe-Fe] hydrogenase: evidence for bridging carbonyl and distal iron coordination vacancy in an electrocatalytically competent proton reduction by an iron thiolate assembly that operates through Fe(0)-Fe(II) levels

IR spectroelectrochemistry of Fe4{Me(CH2S)3}2(CO)8 (4Fe6S) in the nu(CO) region shows that the neutral and anion forms have all their CO groups terminally bound to the Fe atoms; however, for the dianion there is a switch of the coordination mode of at least one of the CO groups. The available structural and nu(CO) spectra are closely reproduced by density-functional theory calculations. The calculated structure of 4Fe6S2- closely mirrors that of the diiron subsite of the [Fe-Fe] hydrogenase H cluster with a bridging CO group and an open coordination site on the outer Fe atom of pairs of dithiolate-bridged Fe0FeII subunits connected by two bridging thiolates. Geometry optimization based on the all-terminal CO isomer of 4Fe6S2- does not give a stable structure but reveals a second-order saddle point ca. 11.53 kcal mol(-1) higher in energy than the CO-bridged form. Spectroelectrochemical studies of electrocatalytic proton reduction by 4Fe6S show that slow turnover from the primary reduction process (E1/2'=-0.71 V vs Ag/AgCl) involves rate-limiting protonation of 4Fe6S- followed by reduction to H:4Fe6S-. Rapid electrocatalytic proton reduction is obtained at potentials sufficient to access 4Fe6S2-, where the rate of dihydrogen elimination from the FeIIFeII core of 4Fe6S is ca. 500 times faster than that from the FeIFeI core of Fe2(mu-S(CH2)3S)(CO)6. The dramatically increased rate of electrocatalysis obtained from 4Fe6S over all previously identified model compounds appears to be related to the features uniquely common between it and the H-cluster, namely, that turnover involves the same formal redox states of the diiron unit (FeIFeII and Fe0FeII), the presence of an open site on the outer Fe atom of the Fe0FeII unit, and the thiolate-bridge to a second one-electron redox unit.     

Artificial hydrogenases: assembly of an H-cluster analogue within a functionalised poly(pyrrole) matrix

We show that a redox active {Fe(4)S(4)}(2+)-cubane assembly covalently bound within a cysteinyl-alkylammonium functionalised polypyrrole can be modified with a diiron dithiolate carbonyl unit to give an artificial hydrogenase H-cluster framework confined within the polymer matrix.     

CO disrupts the reduced H-cluster of FeFe hydrogenase. A combined DFT and protein film voltammetry study

Carbon monoxide is often described as a competitive inhibitor of FeFe hydrogenases, and it is used for probing H(2) binding to synthetic or in silico models of the active site H-cluster. Yet it does not always behave as a simple inhibitor. Using an original approach which combines accurate electrochemical measurements and theoretical calculations, we elucidate the mechanism by which, under certain conditions, CO binding can cause permanent damage to the H-cluster. Like in the case of oxygen inhibition, the reaction with CO engages the entire H-cluster, rather than only the Fe(2) subsite.     

M?ssbauer characterization of the iron-sulfur clusters in Desulfovibrio vulgaris hydrogenase.

The periplasmic hydrogenase of Desulfovibrio vulgaris (Hildenbourough) is an all Fe-containing hydrogenase. It contains two ferredoxin type [4Fe-4S] clusters, termed the F clusters, and a catalytic H cluster. Recent X-ray crystallographic studies on two Fe hydrogenases revealed that the H cluster is composed of two sub-clusters, a [4Fe-4S] cluster ([4Fe-4S](H)) and a binuclear Fe cluster ([2Fe](H)), bridged by a cysteine sulfur. The aerobically purified D. vulgaris hydrogenase is stable in air. It is inactive and requires reductive activation. Upon reduction, the enzyme becomes sensitive to O(2), indicating that the reductive activation process is irreversible. Previous EPR investigations showed that upon reoxidation (under argon) the H cluster exhibits a rhombic EPR signal that is not seen in the as-purified enzyme, suggesting a conformational change in association with the reductive activation. For the purpose of gaining more information on the electronic properties of this unique H cluster and to understand further the reductive activation process, variable-temperature and variable-field M?ssbauer spectroscopy has been used to characterize the Fe-S clusters in D. vulgaris hydrogenase poised at different redox states generated during a reductive titration, and in the CO-reacted enzyme. The data were successfully decomposed into spectral components corresponding to the F and H clusters, and characteristic parameters describing the electronic and magnetic properties of the F and H clusters were obtained. Consistent with the X-ray crystallographic results, the spectra of the H cluster can be understood as originating from an exchange coupled [4Fe-4S]-[2Fe] system. In particular, detailed analysis of the data reveals that the reductive activation begins with reduction of the [4Fe-4S](H) cluster from the 2+ to the 1+ state, followed by transfer of the reducing equivalent from the [4Fe-4S](H) subcluster to the binuclear [2Fe](H) subcluster. The results also reveal that binding of exogenous CO to the H cluster affects significantly the exchange coupling between the [4Fe-4S](H) and the [2Fe](H) subclusters. Implication of such a CO binding effect is discussed.     

Terminal ligand influence on the electronic structure and intrinsic redox properties of the [Fe4S4]2+ cubane clusters

We used photoelectron spectroscopy (PES) to study how the terminal ligands influence the electronic structure and redox properties of the [4Fe-4S] cubane in several series of ligand-substituted analogue complexes: [Fe(4)S(4)Cl(4-x)(CN)(x)](2-), [Fe(4)S(4)Cl(4-x)(SCN)(x)](2-), [Fe(4)S(4)Cl(4-x)(OAc)(x)](2-), [Fe(4)S(4)(SC(2)H(5))(4-x)(OPr)(x)](2-), and [Fe(4)S(4)(SC(2)H(5))(4-x)Cl(x)](2-) (x = 0-4). All the ligand-substituted complexes gave similar PES spectral features as the parents, suggesting that the mixed-ligand coordination does not perturb the electronic structure of the cubane core significantly. The terminal ligands, however, have profound effects on the electron binding energies of the cubane and induce significant shifts of the PES spectra, increasing in the order SC(2)H(5)(-) --> Cl(-) --> OAc(-)/OPr(-) --> CN(-) --> SCN(-). A linear relationship between the electron binding energies and the substitution number x was observed for each series, indicating that each ligand contributes independently and additively to the total binding energy. The electron binding energies of the gaseous complexes represent their intrinsic oxidation energies; the observed linear dependence on x is consistent with similar observations on the redox potentials of mixed-ligand cubane complexes in solution. The current study reveals the electrostatic nature of the interaction between the [4Fe-4S] cubane core and its coordination environment and provides further evidence for the electronic and structural stability of the cubane core and its robustness as a structural and functional unit in Fe-S proteins.     

Computational chemical analysis of [FeFe] hydrogenase H-cluster analogues to discern catalytically relevant features of the natural diatomic ligand configuration

Density functional theoretical models of the electronic structure of several configurational isomers and analogues of the [2Fe](H) H-cluster in [FeFe] hydrogenase were analyzed to identify distinguishing features of the canonical cofactor structure potentially relevant to catalysis. Collective analysis of geometric changes over models of oxidized and reduced [2Fe] clusters highlighted movement of the bridging carbonyl and anticorrelation of the proximal and distal Fe-C(terminal) bonds as key explanatory factors for variance over the considered models. Charge and bond order analysis suggest that as the bridging carbonyl favors the distal iron upon reduction, bonding simultaneously becomes more ionic in nature, raising the possibility of simple electrostatic stabilization as a factor in charge accumulation prior to ultimate H(2) creation and release. Frontier orbital energies show cis and trans arrangements of cyanide on the Fe-Fe core to have distinctive energies from the other models, which may be important for redox poise. Altogether, few factors qualitatively distinguish the cis- from the trans-cyano configurations, which may in fact enhance catalytic robustness under conditions leading to exchange of the bridging and terminal carbonyl ligands. However, the naturally occurring trans configuration possesses two distinct donor-metal-acceptor S-Fe-C(O) interactions, which might play a role in enforcing a low-spin ground state for the hydridic mechanism of H(2) production.     

The oxygen-resistant [FeFe]-hydrogenase CbA5H harbors an unknown radical signal

[FeFe]-hydrogenases catalyze the reversible conversion of molecular hydrogen into protons and electrons with remarkable efficiency. However, their industrial applications are limited by their oxygen sensitivity. Recently, it was shown that the [FeFe]-hydrogenase from Clostridium beijerinckii (CbA5H) is oxygen-resistant and can be reactivated after oxygen exposure. In this work, we used multifrequency continuous wave and pulsed electron paramagnetic resonance (EPR) spectroscopy to characterize the active center of CbA5H, the H-cluster. Under oxidizing conditions, the spectra were dominated by an additional and unprecedented radical species. The generation of this radical signal depends on the presence of an intact H-cluster and a complete proton transfer pathway including the bridging azadithiolate ligand. Selective ⁵⁷Fe enrichment combined with isotope-sensitive electron-nuclear double resonance (ENDOR) spectroscopy revealed a spin density distribution that resembles an H-cluster state. Overall, we uncovered a radical species in CbA5H that is potentially involved in the redox sensing of CbA5H.

Electron paramagnetic resonance spectroscopy revealed an unprecedented radical species in the oxygen-resistant [FeFe]-hydrogenase CbA5H. Analysis of the isotope-sensitive data suggests that it is related to the active site, the H-cluster.     

Biosynthesis of the catalytic H-cluster of [FeFe] hydrogenase: the roles of the Fe–S maturase proteins HydE,HydF, and HydG

[FeFe] hydrogenases carry out the redox interconversion of protons and molecular hydrogen (2H⁺ + 2e⁻ ⇌ H₂) at a complex Fe–S active site known as the H-cluster. The H-cluster consists of a [4Fe–4S] subcluster, denoted here as [4Fe]_H, linked via a cysteine sulfur to an interesting organometallic [2Fe]_H subcluster thought to be the subsite where the catalysis occurs. This [2Fe]_H subcluster consists of two Fe atoms, linked with a bridging CO and a bridging SCH₂NHCH₂S azadithiolate (adt), with additional terminal CO and CN ligands bound to each Fe. Synthesizing such a complex organometallic unit is a fascinating problem in biochemistry, complicated by the toxic nature of both the CO and CN⁻ species and the relative fragility of the azadithiolate bridge. It has been known for a number of years that this complex biosynthesis is carried out by a set of three essential Fe–S proteins, HydE, HydF, and HydG. HydF is a GTPase, while HydE and HydG are both members of the large family of radical S-adenosylmethionine (rSAM) enzymes. In this perspective we describe the history of research and discovery concerning these three Fe–S “maturase” proteins and describe recent evidence for a sequential biosynthetic pathway beginning with the synthesis of a mononuclear organometallic [Fe(ii)(CO)₂CN(cysteine)] complex by the rSAM enzyme HydG and its subsequent activation by the second rSAM enzyme HydE to form a highly reactive Fe(i)(CO)₂(CN)S species. In our model a pair of these Fe(i)(CO)₂(CN)S units condense to form the [Fe(CO)₂(CN)S]₂ diamond core of the [2Fe]_H cluster, requiring only the installation of the central CH₂NHCH₂ portion of the azadithiolate bridge, whose atoms are all sourced from the amino acid serine. This final step likely occurs with an interplay of HydE and HydF, the details of which yet remain to be elucidated.

Fe–S cluster enzymes HydG, HydE, and HydF provide sequential assembly of the catalytic H-cluster of [FeFe] hydrogenase.     

Direct measurement of the hydrogen-bonding effect on the intrinsic redox potentials of [4Fe-4S] cubane complexes

To probe how H-bonding effects the redox potential changes in Fe-S proteins, we produced and studied a series of gaseous cubane-type analogue complexes, [Fe(4)S(4)(SEt)(3)(SC(n)H(2n+1))](2-) and [Fe(4)S(4)(SEt)(3)(SC(n)H(2n)OH)](2-) (n = 4, 6, 11; Et = C(2)H(5)). Intrinsic redox potentials for the [Fe(4)S(4)](2+/3+) redox couple involved in these complexes were measured by photoelectron spectroscopy. The oxidation energies from [Fe(4)S(4)(SEt)(3)(SC(n)H(2n)OH)](2-) to [Fe(4)S(4)(SEt)(3)(SC(n)H(2n)OH)](-) were determined directly from the photoelectron spectra to be approximately 130 meV higher than those for the corresponding [Fe(4)S(4)(SEt)(3)(SC(n)H(2n+1))](2-) systems, because of the OH...S hydrogen bond in the former. Preliminary Monte Carlo and density functional calculations showed that the H-bonding takes place between the -OH group and the S on the terminal ligand in [Fe(4)S(4)(SEt)(3)(SC(6)H(12)OH)](2-). The current data provide a direct experimental measure of a net H-bonding effect on the redox potential of [Fe(4)S(4)] clusters without the perturbation of other environmental effects.     

Mechanism of H2 production by the [FeFe]H subcluster of di-iron hydrogenases: implications for abiotic catalysts

To explore the possibility that the active center of the di-iron hydrogenases, the [FeFe] H subcluster, can serve by itself as an efficient hydrogen-producing catalyst, we perform comprehensive calculations of the catalytic properties of the subcluster in vacuo using first principles density functional theory. For completeness, we examine all nine possible geometrical isomers of the Fe(II)Fe(I) active-ready state and report in detail on the relevant ones that lead to the production of H 2. These calculations, carried out at the generalized gradient approximation level, indicate that the most efficient catalytic site in the isolated [FeFe] H subcluster is the Fe d center distal (d) to the [4Fe-4S] H cluster; the other iron center site, the proximal Fe p, also considered in this study, has much higher energy barriers. The pathways with the most favorable kinetics (lowest energy barrier to reaction) proceed along configurations with a CO ligand in a bridging position. The most favorable of these CO-bridging pathways start from isomers where the distal CN (-) ligand is in up position, the vacancy V in down position, and the remaining distal CO is either cis or trans with respect to the proximal CO. These isomers, not observed in the available enzyme X-ray structures, are only marginally less stable than the most stable nonbridging Fe d-CO-terminal isomer. Our calculations indicate that this CO-bridging CN-up isomer has a small barrier to production of H 2 that is compatible with the observed rate for the enzyme. These results suggest that catalysis of H 2 production could proceed on this stereochemically modified [FeFe] H subcluster alone, thus offering a promising target for functional bioinspired catalyst design.     

A theoretical study on the enhancement of functionally relevant electron transfers in biomimetic models of [FeFe]-hydrogenases

Recent advances aimed at modeling the chemistry of the active site of [FeFe]-hydrogenases (the H-cluster, composed by a catalytic Fe(2)S(2) subcluster and an Fe(4)S(4) portion) have led to the synthesis of binuclear coordination compounds containing a noninnocent organophosphine ligand [2,3-bis(diphenylphosphino)maleic anhydride, bma] that is able to undergo monoelectron reduction, analogously to the tetranuclear Fe(4)S(4) subcluster portion of the H-cluster. However, such a synthetic model was shown to feature negligible electronic communication between the noninnocent ligand and the remaining portion of the cluster, at variance with the enzyme active site. Here, we report a theoretical investigation that shows why the electron transfer observed in the enzyme upon protonation of the catalytic Fe(2)S(2) subsite cannot take place in the bma-containing cluster. In addition, we show that targeted modifications of the bma ligand are sufficient to restore the electronic communication within the model, such that electron density can be more easily withdrawn from the noninnocent ligand, as a result of protonation of the iron centers. Similar results were also obtained with a ligand derived from cobaltocene. The relevance of our findings is discussed from the perspective of biomimetic reproduction of proton reduction to yield molecular hydrogen.     

Synthetic and structural studies on [Fe2(SR)2(CN)x(CO)6-x](x-) as active site models for Fe-only hydrogenases.

A series of models for the active site (H-cluster) of the iron-only hydrogenase enzymes (Fe-only H2-ases) were prepared. Treatment of MeCN solutions of Fe2(SR)2(CO)6 with 2 equiv of Et4NCN gave [Fe2(SR)2(CN)2(CO)4](2-) compounds. IR spectra of the dicyanides feature four nu(CO) bands between 1965 and 1870 cm(-1) and two nu(CN) bands at 2077 and 2033 cm(-1). For alkyl derivatives, both diequatorial and axial-equatorial isomers were observed by NMR analysis. Also prepared were a series of dithiolate derivatives (Et4N)2[Fe2(SR)2(CN)2(CO)4], where (SR)2 = S(CH2)2S, S(CH2)3S. Reaction of Et4NCN with Fe2(S-t-Bu)2(CO)6 gave initially [Fe2(S-t-Bu)2(CN)2(CO)4](2-), which comproportionated to give [Fe2(S-t-Bu)2(CN)(CO)5](-). The mechanism of the CN(-)-for-CO substitution was probed as follows: (i) excess CN(-) with a 1:1 mixture of Fe2(SMe)2(CO)6 and Fe2(SC6H4Me)2(CO)6 gave no mixed thiolates, (ii) treatment of Fe2(S2C3H6)(CO)6 with Me3NO followed by Et4NCN gave (Et4N)[Fe2(S2C3H6)(CN)(CO)5], which is a well-behaved salt, (iii) treatment of Fe2(S2C3H6)(CO)6 with Et4NCN in the presence of excess PMe3 gave (Et4N)[Fe2(S2C3H6)(CN)(CO)4(PMe3)] much more rapidly than the reaction of PMe3 with (Et4N)[Fe2(S2C3H6)(CN)(CO)5], and (iv) a competition experiment showed that Et4NCN reacts with Fe2(S2C3H6)(CO)6 more rapidly than with (Et4N)[Fe2(S2C3H6)(CN)(CO)5]. Salts of [Fe2(SR)2(CN)2(CO)4](2-) (for (SR)2 = (SMe)2 and S2C2H4) and the monocyanides [Fe2(S2C3H6)(CN)(CO)5](-) and [Fe2(S-t-Bu)2(CN)(CO)5](-) were characterized crystallographically; in each case, the Fe-CO distances were approximately 10% shorter than the Fe-CN distances. The oxidation potentials for Fe2(S2C3H6)(CO)4L2 become milder for L = CO, followed by MeNC, PMe3, and CN(-); the range is approximately 1.3 V. In water,oxidation of [Fe2(S2C3H6)(CN)2(CO)4](2-) occurs irreversibly at -0.12 V (Ag/AgCl) and is coupled to a second oxidation.     

Changing the ligation of the distal [4Fe4S] cluster in NiFe hydrogenase impairs inter- and intramolecular electron transfers

In NiFe hydrogenases, electrons are transferred from the active site to the redox partner via a chain of three Iron-Sulfur clusters, and the surface-exposed [4Fe4S] cluster has an unusual His(Cys)3 ligation. When this Histidine (H184 in Desulfovibrio fructosovorans) is changed into a cysteine or a glycine, a distal cubane is still assembled but the oxidative activity of the mutants is only 1.5 and 3% of that of the WT, respectively. We compared the activities of the WT and engineered enzymes for H2 oxidation, H+ reduction and H/D exchange, under various conditions: (i) either with the enzyme directly adsorbed onto an electrode or using soluble redox partners, and (ii) in the presence of exogenous ligands whose binding to the exposed Fe of H184G was expected to modulate the properties of the distal cluster. Protein film voltammetry proved particularly useful to unravel the effects of the mutations on inter and intramolecular electron transfer (ET). We demonstrate that changing the coordination of the distal cluster has no effect on cluster assembly, protein stability, active-site chemistry and proton transfer; however, it slows down the first-order rates of ET to and from the cluster. All-sulfur coordination is actually detrimental to ET, and intramolecular (uphill) ET is rate determining in the glycine variant. This demonstrates that although [4Fe4S] clusters are robust chemical constructs, the direct protein ligands play an essential role in imparting their ability to transfer electrons.     

Density functional theory investigation of the active site of [Fe]-hydrogenases: effects of redox state and ligand characteristics on structural,electronic, and reactivity properties of complexes related to the [2Fe]H subcluster

The effects of redox state and ligand characteristics on structural, electronic, and reactivity properties of complexes related to the [2Fe](H) subcluster of [Fe]-hydrogenases have been investigated by DFT calculations and compared with experimental and theoretical data obtained investigating both the enzyme and synthetic model complexes. Our results show that Fe(II)Fe(II) species characterized by OH or H(2)O groups terminally coordinated to the iron atom distal to the terminal sulfur ligand (Fe(d)) are less stable than corresponding mu-OH or mu-H(2)O species, suggesting that the latter are destabilized or kinetically inaccessible in the enzyme. In addition, results obtained investigating Fe(I)Fe(I) and Fe(II)Fe(I) complexes show that structure and relative stability of species characterized by a mu-CO group are significantly affected by the electronic properties of the ligands coordinated to the iron atoms. The investigation of reaction pathways for H(2) activation confirms and extends a previous hypothesis indicating that H(2) can be cleaved on Fe(II)Fe(II) species. In particular, even though [Fe]-hydrogenases are proposed to bind and activate H(2) at a single iron center, the comparison of our data with experimental results obtained studying synthetic complexes (Zhao, X.; Georgakaki, I. P.; Miller, M. L.; Mejia-Rodriguez, R.; Chiang, C.-Y.; Darensbourg, M. Y. Inorg. Chem. 2002, 41, 3917) suggests that activation paths involving both metal ions are also possible. Moreover, mu-H Fe(II)Fe(I) complexes are predicted to correspond to stable species and might be formed in the enzyme catalytic cycle.