A two‐dimensional cadmium(II) coordination polymer constructed from 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate and 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate ligands

Crystals of poly[[aqua[μ₃‐4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylato‐κ⁵O¹O^1′:N³,O⁴:O⁵][μ₄‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ⁷N³,O⁴:O⁴,O^4′:O¹,O^1′:O¹]cadmium(II)] monohydrate], {[Cd₂(C₁₅H₁₄N₂O₄)(C₁₆H₁₄N₂O₆)(H₂O)]·H₂O}_n or {[Cd₂(Hcpimda)(cpima)(H₂O)]·H₂O}_n, (I), were obtained from 1‐(4‐carboxybenzyl)‐2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃cpimda) and cadmium(II) chloride under hydrothermal conditions. The structure indicates that in‐situ decarboxylation of H₃cpimda occurred during the synthesis process. The asymmetric unit consists of two Cd²⁺ centres, one 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate (Hcpimda²⁻) anion, one 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate (cpima²⁻) anion, one coordinated water molecule and one lattice water molecule. One Cd²⁺ centre, i.e. Cd1, is hexacoordinated and displays a slightly distorted octahedral CdN₂O₄ geometry. The other Cd centre, i.e. Cd2, is coordinated by seven O atoms originating from one Hcpimda²⁻ ligand and three cpima²⁻ ligands. This Cd²⁺ centre can be described as having a distorted capped octahedral coordination geometry. Two carboxylate groups of the benzoate moieties of two cpima²⁻ ligands bridge between Cd2 centres to generate [Cd₂O₂] units, which are further linked by two cpima²⁻ ligands to produce one‐dimensional (1D) infinite chains based around large 26‐membered rings. Meanwhile, adjacent Cd1 centres are linked by Hcpimda²⁻ ligands to generate 1D zigzag chains. The two types of chains are linked through a μ₂‐η² bidentate bridging mode from an O atom of an imidazole carboxylate unit of cpima²⁻ to give a two‐dimensional (2D) coordination polymer. The simplified 2D net structure can be described as a 3,6‐coordinated net which has a (4³)₂(4⁶.6⁶.8³) topology. Furthermore, the FT–IR spectroscopic properties, photoluminescence properties, powder X‐ray diffraction (PXRD) pattern and thermogravimetric behaviour of the polymer have been investigated.     

One‐ and two‐dimensional CdII coordination polymers constructed from 2‐(2‐methyl‐1H‐benzimidazol‐1‐yl)acetate ligands

The one‐ and two‐dimensional polymorphic cadmium polycarboxylate coordination polymers, catena‐poly[bis[μ₂‐2‐(2‐methyl‐1H‐benzimidazol‐1‐yl)acetato‐κ³N³:O,O′]cadmium(II)], [Cd(C₁₀H₉N₂O₂)₂]_n, and poly[bis[μ₂‐2‐(2‐methyl‐1H‐benzimidazol‐1‐yl)acetato‐κ³N³:O,O′]cadmium(II)], also [Cd(C₁₀H₉N₂O₂)₂]_n, were prepared under solvothermal conditions. In each structure, each Cd^II atom is coordinated by four O atoms and two N atoms from four different ligands. In the former structure, two crystallographically independent Cd^II atoms are located on twofold symmetry axes and doubly bridged in a μ₂‐N:O,O′‐mode by the ligands into correspondingly independent chains that run in the [100] and [010] directions. Chains containing crystallographically related Cd^II atoms are linked into sheets viaπ–π stacking interactions. Sheets containing one of the distinct types of Cd^II atom are stacked perpendicular to [001] and alternate with sheets containing the other type of Cd^II atom. The second complex is a two‐dimensional homometallic Cd^II (4,4) net structure in which each Cd^II atom is singly bridged to four neighbouring Cd^II atoms by four ligands also acting in a μ₂‐N:O,O′‐mode. A square‐grid network results and the three‐dimensional supramolecular framework is completed by π–π stacking interactions between the aromatic ring systems.     

Conformational analysis of the disaccharide methyl α‐d‐mannopyranosyl‐(1→3)‐2‐O‐acetyl‐β‐d‐mannopyranoside monohydrate

The crystal structure of methyl α‐d ‐mannopyranosyl‐(1→3)‐2‐O‐acetyl‐β‐d ‐mannopyranoside monohydrate, C₁₅H₂₆O₁₂·H₂O, ( II ), has been determined and the structural parameters for its constituent α‐d ‐mannopyranosyl residue compared with those for methyl α‐d ‐mannopyranoside. Mono‐O‐acetylation appears to promote the crystallization of ( II ), inferred from the difficulty in crystallizing methyl α‐d ‐mannopyranosyl‐(1→3)‐β‐d ‐mannopyranoside despite repeated attempts. The conformational properties of the O‐acetyl side chain in ( II ) are similar to those observed in recent studies of peracetylated mannose‐containing oligosaccharides, having a preferred geometry in which the C2—H2 bond eclipses the C=O bond of the acetyl group. The C2—O2 bond in ( II ) elongates by ～0.02 Å upon O‐acetylation. The phi (?) and psi (ψ) torsion angles that dictate the conformation of the internal O‐glycosidic linkage in ( II ) are similar to those determined recently in aqueous solution by NMR spectroscopy for unacetylated ( II ) using the statistical program MA′AT, with a greater disparity found for ψ (Δ = ～16°) than for ? (Δ = ～6°).     

Synthesis and Conformational Analysis of 1′‐ and 3′‐Substituted 2‐Deoxy‐2‐fluoro‐D‐ribofuranosyl Nucleosides

Convergent syntheses of the 9‐(3‐X‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranosyl)adenines 5 (X=N₃) and 7 (X=NH₂), as well as of their respective α‐anomers 6 and 8 , are described, using methyl 2‐azido‐5‐O‐benzoyl‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranoside ( 4 ) as glycosylating agent. Methyl 5‐O‐benzoyl‐2,3‐dideoxy‐2,3‐difluoro‐β‐D ‐ribofuranoside ( 12 ) was prepared starting from two precursors, and coupled with silylated N⁶‐benzoyladenine to afford, after deprotection, 2′,3′‐dideoxy‐2′,3′‐difluoroadenosine ( 13 ). Condensation of 1‐O‐acetyl‐3,5‐di‐O‐benzoyl‐2‐deoxy‐2‐fluoro‐β‐D ‐ribofuranose ( 14 ) with silylated N²‐palmitoylguanine gave, after chromatographic separation and deacylation, the N⁷‐β‐anomer 17 as the main product, along with 2′‐deoxy‐2′‐fluoroguanosine ( 15 ) and its N⁹‐α‐anomer 16 in a ratio of ca. 42 : 24 : 10. An in‐depth conformational analysis of a number of 2,3‐dideoxy‐2‐fluoro‐3‐X‐D ‐ribofuranosides (X=F, N₃, NH₂, H) as well as of purine and pyrimidine 2‐deoxy‐2‐fluoro‐D ‐ribofuranosyl nucleosides was performed using the PSEUROT (version 6.3) software in combination with NMR studies.     

Methyl 2‐methyl‐6‐methyl­thio‐1,3‐dioxo‐4‐[(2,3,4,6‐tetra‐O‐acetyl‐β‐d‐gluco­pyran­osyl)­amino]‐2,3‐di­hydro‐1H‐pyrrolo­[3,4‐c]­pyridine‐7‐carboxyl­ate

The title compound, C₂₅H₂₉N₃O₁₃S, has peripheral acetyl and carbo­methoxy groups which show disorder. The absolute structure, although known from the starting materials, was confirmed by the analysis. There are no intermolecular hydrogen bonds. This structure is of importance because it elucidates the pathway for hetero‐Diels–Alder reactions between di­methyl acetyl­enedi­carboxyl­ate and 6‐amino­pyridin‐4(3H)‐one derivatives catalyzed by tri­fluoro­acetic acid.     

1‐Carboxymethyl‐3‐methyl‐1H‐imidazol‐3‐ium chloride 2‐(3‐methyl‐1H‐imidazol‐3‐ium‐1‐yl)acetate monohydrate: a crystal stabilized by imidazolium zwitterions

The title compound, C₆H₉N₂O₂⁺·Cl⁻·C₆H₈N₂O₂·H₂O, contains one 2‐(3‐methyl‐1H‐imidazol‐3‐ium‐1‐yl)acetate inner salt molecule, one 1‐carboxymethyl‐3‐methyl‐1H‐imidazol‐3‐ium cation, one chloride ion and one water molecule. In the extended structure, chloride anions and water molecules are linked via O—H...Cl hydrogen bonds, forming an infinite one‐dimensional chain. The chloride anions are also linked by two weak C—H...Cl interactions to neighbouring methylene groups and imidazole rings. Two imidazolium moieties form a homoconjugated cation through a strong and asymmetric O—H...O hydrogen bond of 2.472 (2) Å. The IR spectrum shows a continuous D‐type absorption in the region below 1300 cm⁻¹ and is different to that of 1‐carboxymethyl‐3‐methylimidazolium chloride [Xuan, Wang & Xue (2012). Spectrochim. Acta Part A, 96 , 436–443].     

A structural study of (1RS,2SR,3RS,4SR,5RS)‐2,4‐dibenzoyl‐1,3,5‐triphenylcyclohexan‐1‐ol chloroform hemisolvate and (1RS,2SR,3RS,4SR,5RS)‐2,4‐dibenzoyl‐1‐phenyl‐3,5‐bis(2‐methoxyphenyl)cyclohexan‐1‐ol

(1RS,2SR,3RS,4SR,5RS)‐2,4‐Dibenzoyl‐1,3,5‐triphenylcyclohexan‐1‐ol or (4‐hydroxy‐2,4,6‐triphenylcyclohexane‐1,3‐diyl)bis(phenylmethanone), C₃₈H₃₂O₃, (1), is formed as a by‐product in the NaOH‐catalyzed synthesis of 1,3,5‐triphenylpentane‐1,5‐dione from acetophenone and benzaldehyde. Single crystals of the chloroform hemisolvate, C₃₈H₃₂O₃·0.5CHCl₃, were grown from chloroform. The structure has triclinic (P) symmetry. One diastereomer [as a pair of (1RS,2SR,3RS,4SR,5RS)‐enantiomers] of (1) has been found in the crystal structure and confirmed by NMR studies. The dichoromethane hemisolvate has been reported previously [Zhang et al. (2007). Acta Cryst. E 63 , o4652]. (1RS,2SR,3RS,4SR,5RS)‐2,4‐Dibenzoyl‐3,5‐bis(2‐methoxyphenyl)‐1‐phenylcyclohexan‐1‐ol or [4‐hydroxy‐2,6‐bis(2‐methoxyphenyl)‐4‐phenylcyclohexane‐1,3‐diyl]bis(phenylmethanone), C₄₀H₃₆O₅, (2), is also formed as a by‐product, under the same conditions, from acetophenone and 2‐methoxybenzaldehyde. Crystals of (2) have been grown from chloroform. The structure has orthorhombic (Pca2₁) symmetry. A diastereomer of (2) possesses the same configuration as (1). In both structures, the cyclohexane ring adopts a chair conformation with all bulky groups (benzoyl, phenyl and 2‐methoxyphenyl) in equatorial positions. The molecules of (1) and (2) both display one intramolecular O—H...O hydrogen bond.     

A new one‐dimensional ZnII coordination polymer based on 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole and benzene‐1,2‐dicarboxylate

Multidentate N‐heterocyclic compounds form a variety of metal complexes with many intriguing structures and interesting properties. The title coordination polymer, catena‐poly[zinc(II)‐bis{μ‐2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole}‐κ²N³:N^3′;N^3′:N³‐zinc(II)‐bis(μ‐benzene‐1,2‐dicarboxylato)‐κ²O¹:O²;κ³O¹,O^1′:O²], [Zn₂(C₈H₄O₄)₂(C₁₁H₁₀N₄)₂]_n, has been synthesized by the reaction of Zn(NO₃)₂ with 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole (imb) and benzene‐1,2‐dicarboxylic acid (H₂bdic) under hydrothermal conditions. There are two crystallographically distinct imb ligands [imb(A) and imb(B)] in the structure which adopt very similar coordination geometries. The imb(A) ligand bridges two symmetry‐related Zn1 ions, yielding a binuclear [(Zn1)₂{imb(A)}₂] unit, and the imb(B) ligand bridges two symmetry‐related Zn2 ions resulting in a binuclear [(Zn2)₂{imb(B)}₂] unit. The above‐mentioned binuclear units are further connected alternately by pairs of bridging bdic²⁻ ligands, forming an infinite one‐dimensional chain. These one‐dimensional chains are further connected through N—H...O hydrogen bonds, leading to a two‐dimensional layered structure. In addition, the title polymer exhibits good fluorescence properties in the solid state at room temperature.     

4,4′‐Bipyridyl N,N′‐dioxide–3‐hydroxy‐2‐naphthoic acid (1/2)

4,4′‐Bipyridyl N,N′‐dioxide crystallizes with 3‐hydr­oxy‐2‐naphthoic acid to give a centrosymmetric three‐component adduct, C₁₀H₈N₂O₂·2C₁₁H₈O₃, which is engineered into a two‐dimensional layer structure by two kinds of π–π inter­actions. Weak C—H⋯O inter­actions further link the two‐dimensional structure into a three‐dimensional structure.     

Ein neuer Zugang zu 2′‐O‐(2‐Methoxyethyl)ribonucleosiden ausgehend von D‐Glucose

A New Access to 2′‐ O ‐(2‐Methoxyethyl)ribonucleosides Starting from D ‐Glucose A new synthesis of 2′‐O‐(2‐methoxyethyl)ribonucleosides, building blocks for second‐generation antisense oligonucleotides, starting from D ‐glucose is presented. The key‐step is the transformation of 3‐O‐methoxyethylallofuranose to 2‐O‐(2‐methoxyethyl)ribose by NaIO₄ oxidation. Together with the 4′‐phenylbenzoyl protecting group, which results in crystalline intermediates, this synthesis provides an easy and cheap access to 2′‐O‐(2‐methoxyethyl)‐substituted ribonucleosides.     

Four bis(1‐chloro‐2,2,4,4‐tetramethyl‐3‐oxocyclobutan‐1‐yl)oligosulfanes

The four oligosulfanes, bis(1‐chloro‐2,2,4,4‐tetra­methyl‐3‐oxo­cyclo­butan‐1‐yl)­disulfane, C₁₆H₂₄Cl₂O₂S₂, (III), 1,3‐bis(1‐chloro‐2,2,4,4‐tetra­methyl‐3‐oxo­cyclo­butan‐1‐yl)­trisulfane, C₁₆H₂₄Cl₂O₂S₃, (V), 1,4‐bis(1‐chloro‐2,2,4,4‐tetra­methyl‐3‐oxo­cyclo­butan‐1‐yl)­tetrasulfane, C₁₆H₂₄Cl₂O₂S₄, (VII), and 1,6‐bis(1‐chloro‐2,2,4,4‐tetra­methyl‐3‐oxo­cyclo­butan‐1‐yl)­hexasul­fane, C₁₆H₂₄Cl₂O₂S₆, (VIII), all have similar geometric parameters, with the C—C bond lengths involving the chloro‐substituted cyclo­butanyl C atom being elongated to about 1.59 Å. There are two mol­ecules in the asymmetric units of the tri‐ and tetrasulfanes, and the mol­ecules in the latter compound have local C₂ symmetry. The mol­ecule of the hexasulfane has crystallographic C₂ symmetry. Most of the cyclo­butanyl rings are not perfectly planar and have slight but varying degrees of distortion towards a flattened tetrahedron. The polysulfane chain in each structure has a helical conformation, with each additional S atom in the chain adding approximately one quarter of a turn to the helix.     

Bis(5‐aminotetrazole‐1‐acetato‐κO)tetraaquacobalt(II) and catena‐poly[[cadmium(II)]‐bis(μ‐5‐aminotetrazole‐1‐acetato‐κ3N4:O,O′)]

The Co^II atom in bis(5‐aminotetrazole‐1‐acetato)tetraaquacobalt(II), [Co(C₃H₄N₅O₂)₂(H₂O)₄], (I), is octahedrally coordinated by six O atoms from two 5‐aminotetrazole‐1‐acetate (atza) ligands and four water molecules. The molecule has a crystallographic centre of symmetry located at the Co^II atom. The molecules of (I) are interlinked by hydrogen‐bond interactions, forming a two‐dimensional supramolecular network structure in the ac plane. The Cd^II atom in catena‐poly[[cadmium(II)]‐bis(μ‐5‐aminotetrazole‐1‐acetato], [Cd(C₃H₄N₅O₂)₂]_n, (II), lies on a twofold axis and is coordinated by two N atoms and four O atoms from four atza ligands to form a distorted octahedral coordination environment. The Cd^II centres are connected through tridentate atza bridging ligands to form a two‐dimensional layered structure extending along the ab plane, which is further linked into a three‐dimensional structure through hydrogen‐bond interactions.     

Luminescent properties of three structures built from 3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olate and cadmium

Yellow–orange tetraaquabis(3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olato‐κN³)cadmium(II) dihydrate, [Cd(C₈HN₄O₂)₂(H₂O)₄]·2H₂O, (I), and yellow tetraaquabis(3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olato‐κN³)cadmium(II) 1,4‐dioxane solvate, [Cd(C₈HN₄O₂)₂(H₂O)₄]·C₄H₈O₂, (II), contain centrosymmetric mononuclear Cd²⁺ coordination complex molecules in different conformations. Dark‐red poly[[decaaquabis(μ₂‐3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olato‐κ²N:N′)bis(μ₂‐3‐cyano‐4‐dicyanomethylene‐1H‐pyrrole‐2,5‐diolato‐κ²N:N′)tricadmium] hemihydrate], [Cd₃(C₈HN₄O₂)₂(C₈N₄O₂)₂(H₂O)₁₀]·0.5H₂O, (III), has a polymeric two‐dimensional structure, the building block of which includes two cadmium cations (one of them located on an inversion centre), and both singly and doubly charged anions. The cathodoluminescence spectra of the crystals are different and cover the wavelength range from UV to red, with emission peaks at 377 and 620 nm for (III), and at 583 and 580 nm for (I) and (II), respectively.     

CdII and CoII coordination polymers constructed from benzene‐1,4‐dicarboxylic acid and 2‐(pyridin‐3‐yl)‐1H‐benzimidazole ligands

In poly[aqua(μ₃‐benzene‐1,4‐dicarboxylato‐κ⁵O¹,O^1′:O¹:O⁴,O^4′)[2‐(pyridin‐3‐yl‐κN)‐1H‐benzimidazole]cadmium(II)], [Cd(C₈H₄O₄)(C₁₂H₉N₃)(H₂O)]_n, (I), each Cd^II ion is seven‐coordinated by the pyridine N atom from a 2‐(pyridin‐3‐yl)benzimidazole (3‐PyBIm) ligand, five O atoms from three benzene‐1,4‐dicarboxylate (1,4‐bdc) ligands and one O atom from a coordinated water molecule. The complex forms an extended two‐dimensional carboxylate layer structure, which is further extended into a three‐dimensional network by hydrogen‐bonding interactions. In catena‐poly[[diaquabis[2‐(pyridin‐3‐yl‐κN)‐1H‐benzimidazole]cobalt(II)]‐μ₂‐benzene‐1,4‐dicarboxylato‐κ²O¹:O⁴], [Co(C₈H₄O₄)(C₁₂H₉N₃)₂(H₂O)₂]_n, (II), each Co^II ion is six‐coordinated by two pyridine N atoms from two 3‐PyBIm ligands, two O atoms from two 1,4‐bdc ligands and two O atoms from two coordinated water molecules. The complex forms a one‐dimensional chain‐like coordination polymer and is further assembled by hydrogen‐bonding interactions to form a three‐dimensional network.     

L‐Leucylglycine 0.67‐hydrate and [(4S)‐2,2‐dimethyl‐4‐(2‐methylpropyl)‐5‐oxoimidazolidin‐3‐ium‐1‐yl]acetate

Crystals of L‐leucylglycine (L‐Leu–Gly) 0.67‐hydrate, C₈H₁₆N₂O₃·0.67H₂O, (I), were obtained from an aqueous solution. There are three symmetrically independent dipeptide zwitterionic molecules in (I) and they are parallel to one another. The hydrogen‐bond network composed of carboxylate and amino groups and water molecules extends parallel to the ab plane. Hydrophilic regions composed of main chains and hydrophobic regions composed of the isobutyl groups of the leucyl residues are aligned alternately along the c axis. An imidazolidinone derivative was obtained from L‐Leu–Gly and acetone, viz. [(4S)‐2,2‐dimethyl‐4‐(2‐methylpropyl)‐5‐oxoimidazolidin‐3‐ium‐1‐yl]acetate, C₁₁H₂₀N₂O₃, (II), and was crystallized from a methanol–acetone solution of L‐Leu–Gly. The unit‐cell parameters coincide with those reported previously for L‐Leu–Gly dihydrate revealing that the previously reported values should be assigned to the structure of (II). One of the imidazolidine N atoms is protonated and the ring is nearly planar, except for the protonated N atom. Protonated N atoms and deprotonated carboxy groups of neighbouring molecules form hydrogen‐bonded chains. The ring carbonyl group is not involved in hydrogen bonding.     

Preparation and structural analysis of (±)‐cis‐ethyl 2‐sulfanylidenedecahydro‐1,6‐naphthyridine‐6‐carboxylate and (±)‐trans‐ethyl 2‐oxooctahydro‐1H‐pyrrolo[3,2‐c]pyridine‐5‐carboxylate

Bicycle ring closure on a mixture of (4aS,8aR)‐ and (4aR,8aS)‐ethyl 2‐oxodecahydro‐1,6‐naphthyridine‐6‐carboxylate, followed by conversion of the separated cis and trans isomers to the corresponding thioamide derivatives, gave (4aSR,8aRS)‐ethyl 2‐sulfanylidenedecahydro‐1,6‐naphthyridine‐6‐carboxylate, C₁₁H₁₈N₂O₂S. Structural analysis of this thioamide revealed a structure with two crystallographically independent conformers per asymmetric unit (Z′ = 2). The reciprocal bicycle ring closure on (3aRS,7aRS)‐ethyl 2‐oxooctahydro‐1H‐pyrrolo[3,2‐c]pyridine‐5‐carboxylate, C₁₀H₁₆N₂O₃, was also accomplished in good overall yield. Here the five‐membered ring is disordered over two positions, so that both enantiomers are represented in the asymmetric unit. The compounds act as key intermediates towards the synthesis of potential new polycyclic medicinal chemical structures.     

A new one‐dimensional CdII coordination polymer with a two‐dimensional layered structure incorporating 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole and benzene‐1,2‐dicarboxylate ligands

The N‐heterocyclic ligand 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole (imb) has a rich variety of coordination modes and can lead to polymers with intriguing structures and interesting properties. In the coordination polymer catena‐poly[[cadmium(II)‐bis[μ‐benzene‐1,2‐dicarboxylato‐κ⁴O¹,O^1′:O²,O^2′]‐cadmium(II)‐bis{μ‐2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole}‐κ²N²:N³;κ²N³:N²] dimethylformamide disolvate], {[Cd(C₈H₄O₄)(C₁₁H₁₀N₄)]·C₃H₇NO}_n, (I), each Cd^II ion exhibits an irregular octahedral CdO₄N₂ coordination geometry and is coordinated by four O atoms from two symmetry‐related benzene‐1,2‐dicarboxylate (1,2‐bdic²⁻) ligands and two N atoms from two symmetry‐related imb ligands. Two Cd^II ions are connected by two benzene‐1,2‐dicarboxylate ligands to generate a binuclear [Cd₂(1,2‐bdic)₂] unit. The binuclear units are further connected into a one‐dimensional chain by pairs of bridging imb ligands. These one‐dimensional chains are further connected through N—H…O hydrogen bonds and π–π interactions, leading to a two‐dimensional layered structure. The dimethylformamide solvent molecules are organized in dimeric pairs via weak interactions. In addition, the title polymer exhibits good fluorescence properties in the solid state at room temperature.     

Conversion of 3‐amino‐4‐arylamino‐1H‐isochromen‐1‐ones to 1‐arylisochromeno[3,4‐d][1,2,3]triazol‐5(1H)‐ones: synthesis,spectroscopic characterization and the structures of four products and one ring‐opened derivative

An efficient synthesis of 1‐arylisochromeno[3,4‐d][1,2,3]triazol‐5(1H)‐ones, involving the diazotization of 3‐amino‐4‐arylamino‐1H‐isochromen‐1‐ones in weakly acidic solution, has been developed and the spectroscopic characterization and crystal structures of four examples are reported. The molecules of 1‐phenylisochromeno[3,4‐d][1,2,3]triazol‐5(1H)‐one, C₁₅H₉N₃O₂, (I), are linked into sheets by a combination of C—H…N and C—H…O hydrogen bonds, while the structures of 1‐(2‐methylphenyl)isochromeno[3,4‐d][1,2,3]triazol‐5(1H)‐one, C₁₆H₁₁N₃O₂, (II), and 1‐(3‐chlorophenyl)isochromeno[3,4‐d][1,2,3]triazol‐5(1H)‐one, C₁₅H₈ClN₃O₂, (III), each contain just one hydrogen bond which links the molecules into simple chains, which are further linked into sheets by π‐stacking interactions in (II) but not in (III). In the structure of 1‐(4‐chlorophenyl)isochromeno[3,4‐d][1,2,3]triazol‐5(1H)‐one, (IV), isomeric with (III), a combination of C—H…O and C—H…π(arene) hydrogen bonds links the molecules into sheets. When compound (II) was exposed to a strong acid in methanol, quantitative conversion occurred to give the ring‐opened transesterification product methyl 2‐[4‐hydroxy‐1‐(2‐methylphenyl)‐1H‐1,2,3‐triazol‐5‐yl]benzoate, C₁₇H₁₅N₃O₃, (V), where the molecules are linked by paired O—H…O hydrogen bonds to form centrosymmetric dimers.     

3‐[5‐(4‐Chlorophenyl)‐1‐(4‐methoxyphenyl)‐1H‐pyrazol‐3‐yl]propionic acid and the corresponding methyl ester

The synthesis of 3‐[5‐(4‐chlorophenyl)‐1‐(4‐methoxyphenyl)‐1H‐pyrazol‐3‐yl]propionic acid, C₁₉H₁₇ClN₂O₃, (I), and its corresponding methyl ester, methyl 3‐[5‐(4‐chlorophenyl)‐1‐(4‐methoxyphenyl)‐1H‐pyrazol‐3‐yl]propionate, C₂₀H₁₉ClN₂O₃, (II), is regiospecific. However, correct identification of the regioisomer formed by spectroscopic techniques is not trivial and single‐crystal X‐ray analysis provided the only means of unambiguous structure determination. Compound (I) crystallizes with Z′ = 2. The propionic acid groups of the two crystallographically unique molecules form a hydrogen‐bonded dimer, as is typical of carboxylic acid groups in the solid state. Conformational differences between the methoxybenzene and pyrazole rings give rise to two unique molecules. The structure of (II) features just one molecule in the asymmetric unit and the crystal packing makes greater use than (I) of weak C—H...A interactions, despite the lack of any functional groups for classical hydrogen bonding.     

A new one‐dimensional cadmium(II) coordination polymer incorporating 4‐[4‐(1H‐imidazol‐1‐yl)phenyl]pyridine and 5‐hydroxybenzene‐1,3‐dicarboxylate ligands

The design and synthesis of new organic lgands is important to the rapid development of coordination polymers (CPs). However, CPs based on asymmetric ligands are still rare, mainly because such ligands are usually expensive and more difficult to synthesize. The new asymmetric ligand 4‐[4‐(1H‐imidazol‐1‐yl)phenyl]pyridine (IPP) has been used to construct the title one‐dimensional coordination polymer, catena‐poly[[[aqua{4‐[4‐(1H‐imidazol‐1‐yl‐κN³)phenyl]pyridine}cadmium(II)]‐μ‐5‐hydroxybenzene‐1,3‐dicarboxylato‐κ³O¹,O^1′:O³] monohydrate], {[Cd(C₈H₄O₅)(C₁₄H₁₁N₃)₂(H₂O)]·H₂O}_n, under hydrothermal reaction of IPP with Cd^II in the presence of 5‐hydroxyisophthalic acid (5‐OH‐H₂bdc). The Cd^II cation is coordinated by two N atoms from two distinct IPP ligands, three carboxylate O atoms from two different 5‐OH‐bdc²⁻ dianionic ligands and one water O atom in a distorted octahedral geometry. The cationic [Cd(IPP)₂]²⁺ nodes are linked by 5‐OH‐bdc²⁻ ligands to generate a one‐dimensional chain. These chains are extended into a two‐dimensional layer structure via O—H…O and O—H…N hydrogen bonds and π–π interactions.