The Intermetalloid Cluster [(Cp*AlCu)6H4], Embedding a Cu6 Core Inside an Octahedral Al6 Shell: Molecular Models of Hume–Rothery Nanophases

Defined molecular models for the surface chemistry of Hume–Rothery nanophases related to catalysis are very rare. The Al‐Cu intermetalloid cluster [(Cp*AlCu)₆H₄] was selectively obtained from the clean reaction of [(Cp*Al)₄] and [(Ph₃PCuH)₆]. The stronger affinity of Cp*Al towards Cu sweeps the phosphine ligands from the copper hydride precursor and furnishes an octahedral Al₆ cage to encapsulate the Cu₆ core. The resulting hydrido cluster M₁₂H₄ reacts with benzonitrile to give the stoichiometric hydrometalation product [(Cp*AlCu)₆H₃(N=CHPh)].     

Atom‐Precise Organometallic Zinc Clusters

The bottom‐up synthesis of organometallic zinc clusters is described. The cation {[Zn₁₀](Cp*)₆Me}⁺ ( 1 ) is obtained by reacting [Zn₂Cp*₂] with [FeCp₂][BAr₄^F] in the presence of ZnMe₂. In the presence of suitable ligands, the high reactivity of 1 enables the controlled abstraction of single Zn units, providing access to the lower‐nuclearity clusters {[Zn₉](Cp*)₆} ( 2 ) and {[Zn₈](Cp*)₅(^tBuNC)₃}⁺ ( 3 ). According to DFT calculations, 1 and 2 can be described as closed‐shell species that are electron‐deficient in terms of the Wade–Mingos rules because the apical ZnCp* units that constitute the cluster cage do not have three, but only one, frontier orbitals available for cluster bonding. Zinc behaves flexibly in building the skeletal metal–metal bonds, sometimes providing one major frontier orbital (like Group 11 metals) and sometimes providing three frontier orbitals (like Group 13 elements).     

Synthese und Strukturen neuer selenido‐ und selenolatoverbrückter Kupfercluster: [Cu38Se13(SePh)12(dppb)6] (1), [Cu(dppp)2][Cu25Se4(SePh)18(dppp)2] (2), [Cu36Se5(SePh)26(dppa)4] (3), [Cu58Se16(SePh)24(dppa)6] (4) und [Cu3(SeMes)3(dppm)] (5)

Syntheses and Crystal Structures of new Selenido‐ and Selenolato‐bridged Copper Clusters: [Cu₃₈Se₁₃(SePh)₁₂(dppb)₆] (1), [Cu(dppp)₂][Cu₂₅Se₄(SePh)₁₈(dppp)₂] (2), [Cu₃₆Se₅(SePh)₂₆(dppa)₄] (3), [Cu₅₈Se₁₆(SePh)₂₄(dppa)₆] (4), and [Cu₃(SeMes)₃(dppm)] (5) The reactions of copper(I) chloride or copper(I) acetate with monodentate phosphine ligands (PR₃; R = organic group) and Se(SiMe₃)₂ have already lead to the formation of CuSe clusters with up to 146 copper and 73 selenium atoms. If the starting materials and the bidentate phosphine ligands (Ph₂P–(CH₂)_n–PPh₂, n = 1: dppm, n = 3: dppp, n = 4: dppb; Ph₂P–C≡C–PPh₂: dppa) and silylated chalcogen derivates are changed (RSeSiMe₃; R = Ph, Mes) a series of new CuSe clusters can be synthesized. From single crystal X‐ray structure analysis one can characterise [Cu₃₈Se₁₃(SePh)₁₂(dppb)₆] ( 1 ), [Cu(dppp)₂] · [Cu₂₅Se₄(SePh)₁₈(dppp)₂] ( 2 ), [Cu₃₆Se₅(SePh)₂₆(dppa)₄] ( 3 ), [Cu₅₈Se₁₆(SePh)₂₄(dppa)₆] ( 4 ) and [Cu₃(SeMes)₃(dppm)] ( 5 ). In this new class of CuSe clusters, compounds 1 and 4 possess a spherical cluster skeleton, wheras 2 and 3 have a layered cluster core.     

Coinage Metal Complexes of Bis(quinoline-2-ylmethyl)phenylphosphine-Simple Reactions Can Lead to Unprecedented Results

The different coordination behavior of the flexible yet sterically demanding, hemilabile P,N ligand bis(quinoline-2-ylmethyl)phenylphosphine ( bqmpp ) towards selected Cu^I, Ag^I and Au^I species is described. The resulting X-ray crystal structures reveal interesting coordination geometries. With [Cu(MeCN)₄]BF₄, compound 1 [Cu₂(bqmpp)₂](BF₄)₂ is obtained, wherein the copper(I) atoms display a distorted square planar and square pyramidal geometry. The steric demand and π-stacking of the ligand allow for a short Cu⋅⋅⋅Cu distance (2.588(9) Å). Cu^I complex 2 [Cu₄Cl₃(bqmpp)₂]BF₄ contains a rarely observed Cu₄Cl₃ cluster, probably enabled by dichloromethane as the chloride source. In the cluster, even shorter Cu⋅⋅⋅Cu distances (2.447(1) Å) are present. The reaction of Ag[SbF₆] with the ligand leads to a dinuclear compound ( 3 ) in solution as confirmed by ³¹P{¹H} NMR spectroscopy. During crystallization, instead of the expected phosphine complex 3 , a tris(quinoline-2-ylmethyl)bisphenyl-phosphine ( tqmbp ) compound [Ag₂(tqmbp)₂](SbF₆)₂ 4 is formed by elimination of quinaldine. The Au(I) compound [Au₂(bqmpp)₂]PF₆ ( 5 ) is prepared as expected and shows a linear arrangement of two phosphine ligands around Au^I.     

Stable monovalent aluminum(i) in a reduced phosphomolybdate cluster as an active acid catalyst

Low-valent aluminum Al(i) chemistry has attracted extensive research interest due to its unique chemical and catalytic properties but is limited by its low stability. Herein, a hourglass phosphomolybdate cluster with a metal-center sandwiched by two benzene-like planar subunits and large steric-hindrance is used as a scaffold to stabilize low-valent Al(i) species. Two hybrid structures, (H₃O)₂(H₂bpe)₁₁[Al^III(H₂O)₂]₃{[Al^I(P₄Mo^V₆O₃₁H₆)₂]₃·7H₂O (abbr. Al₆{P₄Mo₆}₆) and (H₃O)₃(H₂bpe)₃[Al^I(P₄Mo^V₆O₃₁H₇)₂]·3.5H₂O (abbr. Al{P₄Mo₆}₂) (bpe = trans-1,2-di-(4-pyridyl)-ethylene) were successfully synthesized with Al(i)-sandwiched polyoxoanionic clusters as the first inorganic-ferrocene analogues of a monovalent group 13 element with dual Lewis and Brønsted acid sites. As dual-acid catalysts, these hourglass structures efficiently catalyze a solvent-free four-component domino reaction to synthesize 1,5-benzodiazepines. This work provides a new strategy to stabilize low-valent Al(i) species using a polyoxometalate scaffold.

Monovalent aluminum(i) species was successfully stabilized using a reduced phosphomolybdate scaffold as a dual-acid catalyst for a four-component domino reaction.

Low- or sub-valence aluminum compounds are increasingly growing into a significant frontier subject in coordination and modern organic synthetic chemistry owing to their unique singlet carbene character, Lewis acid/base properties and catalytic reactivity.¹ However, low-valence aluminum(i) compounds have inherent electron deficiency and exhibit thermodynamic instability, making them prone to self-polymerization with metal–metal bonds² or disproportionation³ to metallic Al and Al(iii) species. Inspired by the special stabilizing effect of metallocene compounds, a ligand stabilization strategy has recently been undertaken to stabilize the low-valence aluminum center.^4,5 In this regard, the utilized ligand should satisfy two key criteria: (i) sufficient steric hindrance is required to inhibit monomer polymerization; and (ii) a suitable electronic effect is needed to stabilize the aluminum(i) center. A few organometallic Al(i) compounds protected by bulky organic groups have been prepared such as [(Cp*Al)₄] (Cp* = C₅Me₅),⁶ and [(CMe₃)₃SiAl₄].⁷ However, despite having the ligand effect, most of these Al(i) compounds still decompose in aqueous solutions or heating conditions. In contrast to organometallic Al(i) compounds, inorganic Al(i) structures, i.e. monomeric monohalides, only exist in gaseous form at high temperature⁸ and to the best of our knowledge, no stable inorganic Al(i) compound is known at room temperature due to thermodynamic instability. Therefore, exploring efficient strategies to synthesize stable inorganic Al(i) compounds remains highly desired but a great challenge.Polyoxometalates (POMs), a diverse family of inorganic molecular clusters based on early-transition metals (W, Mo, V, Nb, and Ta), have extensively attracted attention in research in various fields of materials science, coordination chemistry, medicinal chemistry and catalysis science.^9–11 Owing to their adjustable constituent elements and well-defined structures, POMs have been considered as promising inorganic ligands to stabilize high- and low-valent metal ions. For instance, Rompel et al.¹² reported one Keggin-type [α-CrW₁₂O₄₀]⁵⁻ anion in which a labile {Cr^IIIO₄} tetrahedral unit was assembled at the center of the cluster. Li and co-workers employed a monolacunary Keggin-type inorganic ligand to stabilize a high-valent Cu³⁺ ion.¹³ As a unique member of the POM family, the hourglass-type phosphomolybdate cluster {M[P₄Mo^V₆O₃₁]₂}ⁿ⁻ (abbr. M{P₄Mo₆}₂), consisting of two [P₄Mo^V₆O₃₁]¹²⁻ (abbr. {P₄Mo₆}₂) subunits bridged by one metal (M) center, represents a fully reduced metal-oxo cluster. With all Mo atoms in the oxidation state of (+5), a more negative charge is endowed to the cluster surface.^14,15 Such high electron density of {M[P₄Mo^V₆O₃₁]₂}ⁿ⁻ polyoxoanions provides an electron-rich local environment for the possible stabilization of unusual-valence metals. It is worth noting that the [P₄Mo^V₆O₃₁]¹²⁻ subunit presents near-planar triangular structures with the side sizes ranging from 7.50–7.92 Å (Fig. S1^†). The structural feature can supply sufficient steric hindrance to restrain the polymerization of low-valence metal species. Moreover, the six Mo atoms in each [P₄Mo^V₆O₃₁]¹²⁻ subunit arrange in a planar hexagonal-ring structure like a benzene ring, implying that such {M[P₄Mo^V₆O₃₁]₂}ⁿ⁻ clusters may have a similar delocalized electron structure to conjugated benzene or cyclopentadiene. These features make [P₄Mo^V₆O₃₁]¹²⁻ a promising candidate with respect to organic protecting groups to construct an inorganic ‘ferrocene’ analogue of Al(i) (Scheme 1). Therefore, we hypothesize that hourglass-type polyoxoanion clusters are promising to stabilize the labile Al(i) center and isolate inorganic Al(i) species.Open in a separate windowScheme 1Similar ferrocene-like sandwich structure features of an inorganic hourglass-type [Al^I(P₄Mo^V₆O₃₁)₂]²³⁻ polyanion to an organometallic [(η⁵-Cp*)₂Al^I]⁺ cation.Herein, we show a [P₄Mo^V₆O₃₁]¹²⁻ cluster as an inorganic scaffold to stabilize the Al(i) center in two hybrid compounds, (H₃O)₂(H₂bpe)₁₁[Al^III(H₂O)₂]₃{[Al^I(P₄Mo^V₆O₃₁H₆)₂]₃·7H₂O (abbr. Al₆{P₄Mo₆}₆) and (H₃O)₃(H₂bpe)₃[Al^I(P₄Mo^V₆O₃₁H₇)₂]·3.5H₂O (abbr. Al{P₄Mo₆}₂) (bpe = trans-1,2-di-(4-pyridyl)-ethylene), in which the labile Al(i) center is sandwiched by two [P₄Mo^V₆O₃₁]¹²⁻ sides, forming an inorganic moiety of a ‘ferrocene’ analogue. Both Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ are experimentally determined at room temperature for the first time, and prepared by hydrothermal reactions of Na₂MoO₄·2H₂O, H₃PO₄, AlCl₃·6H₂O, ethanol and N-containing bpe at 160 °C with slightly different pH values. Notably, the combination of ethanol, N-containing bpe and high hydrothermal temperature is a prerequisite to the isolation of Al(i) species. First, both ethanol and N-containing bpe were used to provide a reducing environment under hydrothermal conditions. By combining high temperature and pressure, sufficient energy is supplied to reduce Mo⁶⁺ and Al³⁺ ions to Mo⁵⁺ and Al⁺ species, respectively. Then, Mo⁵⁺ species and phosphoric acid molecules are assembled to form [P₄Mo₆O₃₁]¹²⁻ subunits, which are subsequently combined with Al⁺ ions to form hourglass-type [Al(P₄Mo₆O₃₁)₂]²³⁻, hence effectively stabilizing Al(i) species (Fig. 1). From the perspective of stereochemistry, two highly negative [P₄Mo₆O₃₁]¹²⁻ fragments, resembling the methyl cyclopentadiene organic group, sandwich one low-valent metal Al(i) center. Hence, the construction of a strong reducing hourglass-like skeleton makes it possible to stabilize the existing Al⁺ species.Open in a separate windowFig. 1Ball-and-stick diagram showing the assembly of the hourglass-type cluster {Al(P₄Mo₆)₂}.Single crystal X-ray diffraction revealed the hourglass-type {Al(P₄Mo₆)₂} cluster in Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ (Table S1^†), in which the [P₄Mo₆O₃₁]¹²⁻ subunits have a C₃ symmetry and display a near-planar structure formed by six edge-sharing {MoO₆} octahedra with alternating short Mo–Mo single bonds and long non-bonding Mo⋯Mo contacts. The side sizes of the {P₄Mo₆} subunit range from 7.50–7.92 Å, which supplies sufficient steric hindrance to restrain the polymerization or disproportionation of low-valence Al(i) species. All Mo atoms are in a reduced oxidation state of +5 and the central Al atoms are in the +1 oxidation state, as confirmed by bond valence calculations (Table S2^†). Thus, the synthesized Al{P₄Mo₆}₂ represents a fully reduced metal–oxygen cluster. Moreover, the six Mo atoms in each {P₄Mo₆} subunit present a benzene-like planar hexagonal-ring structure with a similar π-type delocalization electron interaction with Al(i) instead of organic bulky groups. Such π-type delocalization electron interaction constructs an inorganic ‘ferrocene’ analogue of Al(i) and produces sufficient delocalization energy to stabilize Al(i) species. Considering the formation mechanism of traditional metallocenes, {P₄Mo₆} subunits with a similar strong electron-donating ability and suitable steric-hindrance effect on Cp rings, augment the stability of Al(i) species. Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ compounds also present the first isolation of aluminum-sandwiched hourglass-type clusters in POM chemistry. Importantly, regarding the inherent and strong hydrolysis of aluminum species in water, these low-valent Al(i)-containing clusters represent the first example of stable solid-state inorganic sub-valent Al(i) compounds at room temperature.The asymmetric structure of Al₆{P₄Mo₆}₆ consists of two crystallographically independent {Al(P₄Mo₆)₂} clusters sandwiched by central Al(1) and Al(4) atoms, two bridging [Al(H₂O)₂]³⁺ (Al(2) and Al(3)) cations and six protonated bpe cations (Fig. S2^†). Aluminum centers involve two kinds of oxidation states: the central Al(1) and Al(4) are in the +1 state, while the bridging Al(2) and Al(3) are in the +3 state. Both Al(1) and Al(4) display the six-coordinated octahedral configuration and bridge two {P₄Mo₆} subunits to form two {Al^I(P₄Mo₆)₂} clusters. The average lengths of Al–O bonds are 2.318–2.324 Å for Al(1) and Al(4) (Table S3^†), which are slightly longer than those of classic Al–O bonds (1.90 Å) for Al(2) and Al(3), but close to that of the Al–O bond in silica-supported alkylaluminum(i) composites.^16–20 The long Al–O lengths for Al(1) and Al(4) centers may be ascribed to the lower electron cloud density located at the surface of the Al(i) cation, resulting in slightly longer bonds with the surrounding oxygen donors.^5,21 Moreover, the small distorted extents (sum((d_ij − d_ave)/d_ave)²/coordination number) of {Al(1)O₆} (3.86 × 10⁻⁴) and {Al(4)O₆} (1.89 × 10⁻³) indicate that they are in regular octahedral geometry. Moreover, another structural feature of Al₆{P₄Mo₆}₆ is that {Al^I(P₄Mo₆)₂} clusters are connected by bridging [Al(H₂O)₂]³⁺ cationic fragments (Al(2) and Al(3)), forming an unusual chain-like arrangement (Fig. 2a). It is worth noting that the 1-D chain contains a large repeating monomer with the maximum spacing of 81.69 Å, consisting of twelve Al-containing fragments ({–Al2–Al1–Al3–Al4–Al3–Al1–Al2–Al1–Al3–Al4–Al3–Al1–}). Such a long repeating monomer is rare. Each repeating monomer has two types of symmetric systems: Al(2) in the middle of the monomer plays a center of mirror symmetry and divides the whole repeating monomer into two equidistant half-units of {–Al1–Al3–Al4–Al3–Al1–}; Al(4) in each half-unit further acts as the reverse symmetric center of two {–Al3–Al1–Al2–} subunits. The two types of symmetrical systems form the infinitely extending chain-like structure in Al₆{P₄Mo₆}₆. Since bpe is a rigid and conjugated molecular structure, an effective π⋯π stacking interaction emerges and results in a honeycomb-like supramolecular organic moiety, which accommodates these 1-D inorganic chains and stabilizes the whole Al₆{P₄Mo₆}₆ framework (Fig. S3 and S4^†).Open in a separate windowFig. 2(a) One-dimensional (1D) inorganic structure in Al₆{P₄Mo₆}₆ with a length of repeating units of 81.69 Å, consisting of twelve Al-containing fragments ({–Al2–Al1–Al3–Al4–Al3–Al1–Al2–Al1–Al3–Al4–Al3–Al1–}). (b) Four kinds of coordination environments of {AlO₆} octahedra, respectively (i = 1 − x, y, 0.5 − z; ii = 0.5 − x, 1.5 − y, 1 − z).Al{P₄Mo₆}₂ has a similar structure to Al₆{P₄Mo₆}₆ (Table S4^†), wherein the most obvious difference is that {Al^I[P₄Mo₆]₂} clusters exist in isolated form and interact with the surrounding protonated bpe cations via hydrogen bonding to form into a 3-D supramolecular framework (Fig. S5 and S6^†). The different peripheral environment around the {Al^I[P₄Mo₆]₂} cluster can affect its acidity and catalytic activity.The solid-state ²⁷Al NMR spectrum of Al₆{P₄Mo₆}₆ depicts two distinct resonances at δ = −22.34 and 27.33 ppm due to the octahedrally coordinated Al^III and Al^I sites, respectively (Fig. 3a), indicating two types of Al local environments in Al₆{P₄Mo₆}₆. In contrast, Al{P₄Mo₆}₂ displays only one sharp signal at δ = 7.20 ppm due to the octahedrally coordinated Al^I sites (Fig. 3b). The observed narrow peak-width corresponds to the highly symmetric charge distribution at the aluminum nucleus, similar to the ferrocene analogue [(η⁵-Cp*)₂Al^I]⁺.⁵ Noticeably, Al^I resonance in Al₆{P₄Mo₆}₆ appears at a lower magnetic field compared to Al{P₄Mo₆}₂, due to the different peripheral environment around the hourglass {Al(P₄Mo₆)₂} cluster. XPS spectra of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ further affirm the valence states of Al and Mo elements (Fig. S7 and Table S5^†). The Al 2p XPS profile of Al₆{P₄Mo₆}₆ reveals two peaks at 74.39 and 73.75 eV ascribed to Al^III and Al^I, respectively (Fig. 3c). The area ratio of the two peaks is close to 1 : 1, in consistence with the chemical structure of Al₆{P₄Mo₆}₆. The high-resolution Al 2p XPS spectrum of Al{P₄Mo₆}₂ displays a weaker broad peak attributed to the low amount of Al⁺ (Fig. 3d). Moreover, the structural stabilities of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ were investigated by soaking them in water for 24 hours. Fig. S9–S11^† show the comparison of XRD, IR and XPS spectra of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ before and after soaking in water. It can be found that the characteristic diffraction peaks in XRD after soaking for 24 hours still show good agreement with the simulated data (Fig. S9^†). The characterized absorption bands in IR spectra also exhibit good match with the original Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ (Fig. S10^†). The XPS spectra of Al₆{P₄Mo₆}₆ after soaking in water were also obtained. There is basically no change in the high-resolution spectra of Al 2p with the Al^I/Al^III atomic ratios of ca. 1 : 1 (Fig. S11^†). The spectroscopic and theoretical observations verify that the low valence Al(i) species can stably exist in the reduced phosphomolybdates in the solid state (Fig. S12 and Table S6^†). Moreover, the acidities of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ were measured to be 0.27 and 0.442 mmol g⁻¹, respectively, demonstrating the promising potential of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ as dual-acid catalysts.Open in a separate windowFig. 3(a and b) ²⁷Al NMR spectra of solid Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂; (c and d) XPS spectra of Al in Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂.The catalytic performance of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ was evaluated via a solvent-free four-component domino reaction for the synthesis of pharmaceutical intermediate 1,5-benzodiazepine (Table 1). With Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ as catalysts, the yields of the final product 8aaa reach 83% and 75%, respectively (Table 1, entries 1 and 2). Almost no 8aaa is observed without the acid catalysts, even when the reaction is set for a long time (Table 1, entry 3). This clarifies the excellent catalytic performance of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂. Typical Brønsted acid p-TsOH and Lewis acid AlCl₃ as control samples yield only 43% and 29% 8aaa, respectively (Table 1, entries 4 and 5), much lower than those attained by Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ catalysts. Moreover, (H₂en)₁₂[{Na_0.8K_0.2(H₂O)}₂{Na[Mo₆O₁₂(OH)₃(HPO₄)₂(PO₄)₂]₂}₂]·7H₂O^22,23 (abbr. {Na[P₄Mo₆]₂}) in contrast achieved 72% yield of 8aaa in 30 min, slower than that of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂. This indicates the advantage of the unique dual-acid features of Al(i)-stabilized reduced phosphomolybdate clusters with multiple Lewis and Brønsted acid active centers, in which the synergistic effect between the Al species and reduced phosphomolybdate cluster contributes to the catalytic activity.Comparison tests of one-pot synthesis of 1,5-benzodiazepine 8aaavia a four-component domino reaction^a

First Dinuclear Copper/Gallium Complexes: Supporting Cu0 and CuI Centres by Low‐Valent Organogallium Ligands

The synthesis and structural characterisation of low‐valent dinuclear copper(I) and copper(0) complexes supported by organogallium ligands has been accomplished for the first time by the reductive coordination reaction of [GaCp*] (Cp*=pentamethylcyclopentadienyl) and [Ga(ddp)] (ddp=HC(CMeNC₆H₃‐2,6‐iPr₂)₂ 2‐diisopropylphenylamino‐4‐diisopropylphenylimino‐2‐pentene) with readily available copper(II) and copper(I) precursors. The treatment of CuBr₂ and Cu(OTf)₂ (OTf=CF₃SO₃) with [Ga(ddp)] under mild conditions resulted in elimination of [Ga(L)₂(ddp)] (L=Br, OTf) and afforded the novel gallium(I)/copper(I) compounds [{(ddp)GaCu(L)}₂] (L=Br ( 1 ), OTf ( 2 )). The single‐crystal X‐ray structure determinations of 1 and 2 reveal that these molecules are composed of {(ddp)GaCu(L)} dimeric units, with planar Cu^I? Ga^I four‐membered rings and short Cu^I???Cu^I distances, with 2 exhibiting the shortest Cu^I???Cu^I contact reported to date of 2.277(3) Å. The all‐gallium coordinated dinuclear [Cu₂(GaCp*)(μ‐GaCp*)₃Ga(OTf)₃] ( 3 ) is formed when Cu(OTf)₂ is combined with [GaCp*] instead of [Ga(ddp)]. Notably, in the course of this redox reaction Lewis acidic Ga(OTf)₃ is formed, which coordinates to one of the electron‐rich copper(0) centres. Compound 3 is suggested as the first case of a structurally characterised complex of copper(0). By changing the copper(II) to a copper(I) source, that is, [Cu(cod)₂][OTf] (cod=1,5‐cyclooctadiene), the salt [Cu₂(GaCp*)₃(μ‐GaCp*)₂][OTf]₂ ( 4 ) is formed, the cationic part of which is related to previously described isoelectronic dinuclear d¹⁰ complexes of the type [M₂(GaCp*)₅] (M=Pd, Pt).     

Models for the trinuclear copper(II) cluster in the particulate methane monooxygenase from methanotrophic bacteria: Synthesis,spectroscopic and theoretical characterization of trinuclear copper(II) complexes

Three trinuclear Cu(II) complexes [Cu₃(tacp)(μ₃-Cl)₂](Cl)₄ (1), [Cu₃(tacp)(μ₃-Br)₂](Br)₄ (2) and [Cu₃(tacp)(μ₃-OH)₂](Cl)₄ (3) (tacp, 1,10,19-trioxa-4,7,13,16,22,25-hexaazacycloheptaeicosane) are synthesized to model the oxidized tricopper cluster implicated in the particulate methane monooxygenase from Methylococcus capsulatus (Bath). In the enzyme, the three Cu(II) ions are coupled by weak ferromagnetic interactions. The Cu(II) ions in 1 and 2 are shown to be ferromagnetically coupled from magnetic susceptibility and electron paramagnetic resonance (EPR) measurements. EPR suggests anti-ferromagnetic interactions among the Cu(II) ions in 3. Density functional theory calculations reproduce well the geometric, electronic and magnetic properties observed in these complexes and provide insights into the spin-coupling interactions mediated by the bridging ligands.     

Polyoxometalate-Incorporated CuI-Resorcin[4]arene Metal-Organic Complexes as Heterogeneous Catalysts for Catalytic Oxidation of Mustard Gas Simulant

Exploring efficient heterogeneous catalysts for catalytic oxidation of chemical warfare agents (CWAs) is highly desired. As a class of discrete anionic metal oxide clusters, polyoxometalates (POMs) provide abundant catalytic active sites, thus resulting their rich redox properties. Here, a family of known POM-incorporated Cu^I-resorcin[4]arene metal-organic complexes, namely, [Cu₄(TPTR4A)₂][PW₁₂O₄₀](OH) ⋅ 0.5DMA ⋅ 5H₂O ( Cu - PW ), [Cu₄(TPTR4 A)₂][PMo₁₂O₄₀](OH) ⋅ 2DMA ⋅ H₂O ( Cu - PMo ) and [Cu₄(TPTR4A)₂][SiW₁₂O₄₀] ⋅ 2.5DMA ( Cu - SiW ) were utilized as catalysts to promote the oxidation of 2-chloroethyl ethyl sulfide (CEES). Strikingly, compared to the novel compound [Cu₃Cl₆(TPTR4A)(DMA)] ⋅ CH₃CH₂OH (defined as Cu - T ), the three complexes exhibited excellent stability, indicating that the integration of POMs and metal–organic units could improve the stability of the compounds. Moreover, Cu - PMo and Cu - PW showed higher activities for the catalytic oxidation of CEES to CEESO with selectivities both of 99 %.     

Neue Kupferkomplexe mit Phosphaalkenliganden. Molekülstruktur von [Cu{P(Mes*)C(NMe2)2}2]BF4 (Mes* = 2,4,6‐tBu3C6H2)

New Copper Complexes Containing Phosphaalkene Ligands. Molecular Structure of [Cu{P(Mes*)C(NMe₂)₂}₂]BF₄ (Mes* = 2,4,6‐tBu₃C₆H₂) Reaction of equimolar amounts of the inversely polarized phosphaalkene tBuP=C(NMe₂)₂ ( 1a ) and copper(I) bromide or copper(I) iodide, respectively, affords complexes [Cu₃X₃{μ‐P(tBu)C(NMe₂)₂}₃] ( 2 ) (X =Br) and ( 3 ) (X = I) as the formal result of the cyclotrimerization of a 1:1‐adduct. Treatment of 1a with [Cu(L)Cl] (L = PiPr₃; SbiPr₃) leads to the formation of compounds [CuCl(L){P(tBu)C(NMe₂)₂}] ( 4a ) (L = PiPr₃) and ( 4b ) (L = SbiPr₃), respectively. Reaction of [(MeCN)₄Cu]BF₄ with two equivalents of PhP=C(NMe₂)₂ ( 1b ) yields complex [Cu{P(Ph)C(NMe₂)₂}₂]BF₄ ( 5b ). Similarly, compounds [Cu{P(Aryl)C(NMe₂)₂}₂]BF₄ ( 5c (Aryl = Mes and 5d (Aryl = Mes*)) are obtained from ArylP=C(NMe₂)₂ ( 1c : Aryl = Mes; 1d : Mes*) and [(MeCN)₄Cu]BF₄ in the presence of SbiPr₃. Complexes 2 , 3 , 4a , 4b , and 5b‐5d are characterized by means of elemental analyses and spectroscopy (¹H‐, ¹³C{¹H}‐, ³¹P{¹H}‐NMR). The molecular structure of 5d is determined by X‐ray diffraction analysis.     

Encapsulation of tricopper cluster in a synthetic cryptand enables facile redox processes from CuICuICuI to CuIICuIICuII states

One-pot reaction of tris(2-aminoethyl)amine (TREN), [Cu^I(MeCN)₄]PF₆, and paraformaldehyde affords a mixed-valent [TREN₄Cu^IICu^ICu^I(μ₃-OH)](PF₆)₃ complex. The macrocyclic azacryptand TREN₄ contains four TREN motifs, three of which provide a bowl-shape binding pocket for the [Cu₃(μ₃-OH)]³⁺ core. The fourth TREN caps on top of the tricopper cluster to form a cryptand, imposing conformational constraints and preventing solvent interaction. Contrasting the limited redox capability of synthetic tricopper complexes reported so far, [TREN₄Cu^IICu^ICu^I(μ₃-OH)](PF₆)₃ exhibits several reversible single-electron redox events. The distinct electrochemical behaviors of [TREN₄Cu^IICu^ICu^I(μ₃-OH)](PF₆)₃ and its solvent-exposed analog [TREN₃Cu^IICu^IICu^II(μ₃-O)](PF₆)₄ suggest that isolation of tricopper core in a cryptand enables facile electron transfer, allowing potential application of synthetic tricopper complexes as redox catalysts. Indeed, the fully reduced [TREN₄Cu^ICu^ICu^I(μ₃-OH)](PF₆)₂ can reduce O₂ under acidic conditions. The geometric constraints provided by the cryptand are reminiscent of Nature''s multicopper oxidases (MCOs). For the first time, a synthetic tricopper cluster was isolated and fully characterized at Cu^ICu^ICu^I (4a), Cu^IICu^ICu^I (4b), and Cu^IICu^IICu^I (4c) states, providing structural and spectroscopic models for many intermediates in MCOs. Fast electron transfer rates (10⁵ to 10⁶ M⁻¹ s⁻¹) were observed for both Cu^ICu^ICu^I/Cu^IICu^ICu^I and Cu^IICu^ICu^I/Cu^IICu^IICu^I redox couples, approaching the rapid electron transfer rates of copper sites in MCO.

Geometric constraints and site isolation provided by the cryptand enable reversible redox of tricopper μ-oxo cluster.     

Trimetallic Chalcogenide Species: Synthesis,Structures, and Bonding

In an attempt to isolate boron-containing tri-niobium polychalcogenide species, we have carried out prolonged thermolysis reactions of [Cp*NbCl₄] (Cp* = ɳ⁵-C₅Me₅) with four equivalents of Li[BH₂E₃] (E = Se or S). In the case of the heavier chalcogen (Se), the reaction led to the isolation of the tri-niobium cubane-like cluster [(NbCp*)₃(μ₃-Se)₃(BH)(μ-Se)₃] (1) and the homocubane-like cluster [(NbCp*)₃(μ₃-Se)₃(μ-Se)₃(BH)(μ-Se)] (2). Interestingly, the tri-niobium framework of 1 stabilizes a selenaborate {Se₃BH}⁻ ligand. A selenium atom is further introduced between boron and one of the selenium atoms of 1 to yield cluster 2. On the other hand, the reaction with the sulfur-containing borate adduct [LiBH₂S₃] afforded the trimetallic clusters [(NbCp*)₃(μ-S)₄{μ-S₂(BH)}] (3) and [(NbCp*)₃(μ-S)₄{μ-S₂(S)}] (4). Both clusters 3 and 4 have an Nb₃S₆ core, which further stabilizes {BH} and mono-sulfur units, respectively, through bi-chalcogen coordination. All of these species were characterized by ¹¹B{¹H}, ¹H, and ¹³C{¹H} NMR spectroscopy, mass spectrometry, infrared (IR) spectroscopy, and single-crystal X-ray crystallography. Moreover, theoretical investigations revealed that the triangular Nb₃ framework is aromatic in nature and plays a vital role in the stabilization of the borate, borane, and chalcogen units.     

Designed Topology and Site‐Selective Metal Composition in Tetranuclear [MM′⋅⋅⋅M′M] Linear Complexes

The ligand 1,3‐bis[3‐oxo‐3‐(2‐hydroxyphenyl)propionyl]benzene (H₄L), designed to align transition metals into tetranuclear linear molecules, reacts with M^II salts (M=Ni, Co, Cu) to yield complexes with the expected [MM???MM] topology. The novel complexes [Co₄L₂(py)₆] ( 2 ; py=pyridine) and [Na(py)₂][Cu₄L₂(py)₄](ClO₄) ( 3 ) have been crystallographically characterised. The metal sites in complexes 2 and 3 , together with previously characterised [Ni₄L₂(py)₆] ( 1 ), favour different coordination geometries. These have been exploited for the deliberate synthesis of the heterometallic complex [Cu₂Ni₂L₂(py)₆] ( 4 ). Complexes 1 , 2 , 3 and 4 exhibit antiferromagnetic interactions between pairs of metals within each cluster, leading to S=0 spin ground states, except for the latter cluster, which features two quasi‐independent S=1/2 moieties within the molecule. Complex 4 gathers the structural and physical conditions, thus allowing it to be considered as prototype of a two‐qbit quantum gate.     

Organometallic Niobium and Tantalum Complexes with Primary Phosphine Ligands: Syntheses and Molecular Structures of [Cp*MCl4(PH2R)] (M = Nb,Ta; Cp* = C5Me5;R = But,Ad, Cy,Ph, 2, 4, 6‐Me3C6H2 (Mes))

The reaction of [Cp*MCl₄] (M = Nb, Ta; Cp* = C₅Me₅) with PH₂R in toluene at room temperature gives the primary phosphine complexes [Cp*MCl₄(PH₂R)] [Cp* = C₅Me₅; M = Nb: R = Bu^t ( 1a ), Ad ( 2a ), Cy ( 3a ), Ph ( 4a ), 2, 4, 6‐Me₃C₆H₂ (Mes) ( 5a ); M = Ta: R = Bu^t ( 1b ), Ad ( 2b ), Cy ( 3b ), Ph ( 4b ), Mes ( 5b )] in high yield. 1—5 were characterized spectroscopically (NMR, IR, MS) and by crystal structure determinations. The starting material [Cp*TaCl₄] is monomeric in the solid state, as shown by crystal structure determination.     

Unerwartete Reduktion von [Cp*TaCl4(PH2R)] (R = But,Cy, Ad,Ph, 2,4,6‐Me3C6H2; Cp* = C5Me5) durch Reaktion mit DBU – Molekülstruktur von [(DBU)H][Cp*TaCl4] (DBU = 1,8‐Diazabicyclo[5.4.0]undec‐7‐en)

Unexpected Reduction of [Cp*TaCl₄(PH₂R)] (R = Bu^t, Cy, Ad, Ph, 2,4,6‐Me₃C₆H₂; Cp* = C₅Me₅) by Reaction with DBU – Molecular Structure of [(DBU)H][Cp*TaCl₄] (DBU = 1,8‐diazabicyclo[5.4.0]undec‐7‐ene) [Cp*TaCl₄(PH₂R)] (R = Bu^t, Cy, Ad, Ph, 2,4,6‐Me₃C₆H₂ (Mes); Cp* = C₅Me₅) react with DBU in an internal redox reaction with formation of [(DBU)H][Cp*TaCl₄] ( 1 ) (DBU = 1,8‐diazabicyclo[5.4.0]undec‐7‐ene) and the corresponding diphosphane (P₂H₂R₂) or decomposition products thereof. 1 was characterised spectroscopically and by crystal structure determination. In the solid state, hydrogen bonding between the (DBU)H cation and one chloro ligand of the anion is observed.     

Linking of CuI Units by Tetrahedral Mo2E2 Complexes (E=P,As)

The reaction of [Cp₂Mo₂(CO)₄(μ,η^2:2-E₂)] ( A : E=P, B : E=As, Cp=C₅H₅) with the WCA-containing Cu^I salts ([Cu(CH₃CN)₄][Al{OC(CF₃)₃}₄] (CuTEF, C ), [Cu(CH₃CN)₄][BF₄] ( D ) and [Cu(CH₃CN)_3.5][FAl{OC₆F₁₀(C₆F₅)}₃] (CuFAl, E )) affords seven unprecedented coordination compounds. Depending on the E₂ ligand complex, the counter anion of the copper salt and the stoichiometry, four dinuclear copper dimers and three trinuclear copper compounds are accessible. The latter complexes reveal first linear Cu₃ arrays linked by E₂ units (E=P, As) coordinated in an η^2:1:1 coordination mode. All compounds were characterized by X-ray crystallography, NMR and IR spectroscopy, mass spectrometry and elemental analysis. To define the nature of the Cu⋅⋅⋅Cu⋅⋅⋅Cu interactions, DFT calculations were performed.     

Low-Valent MxAl3 Cluster Salts with Tetrahedral [SiAl3]+ and Trigonal-Bipyramidal [M2Al3]2+ Cores (M=Si/Ge)

Schnöckel's [(AlCp*)₄] and Jutzi's [SiCp*][B(C₆F₅)₄] (Cp*=C₅Me₅) are landmarks in modern main-group chemistry with diverse applications in synthesis and catalysis. Despite the isoelectronic relationship between the AlCp* and the [SiCp*]⁺ fragments, their mutual reactivity is hitherto unknown. Here, we report on their reaction giving the complex salts [Cp*Si(AlCp*)₃][WCA] ([WCA]⁻=[Al(OR^F)₄]⁻ and [F{Al(OR^F)₃}₂]⁻; R^F=C(CF₃)₃). The tetrahedral [SiAl₃]⁺ core not only represents a rare example of a low-valent silicon-doped aluminium-cluster, but also—due to its facile accessibility and high stability—provides a convenient preparative entry towards low-valent Si−Al clusters in general. For example, an elusive binuclear [Si₂(AlCp*)₅]²⁺ with extremely short Al−Si bonds and a high negative partial charge at the Si atoms was structurally characterised and its bonding situation analysed by DFT. Crystals of the isostructural [Ge₂(AlCp*)₅]²⁺ dication were also obtained and represent the first mixed Al−Ge cluster.     

Complexes of Co(II), Ni(II), and Cu(II) with 4-(3,4-dichlorophenyl)-1,2,4-triazole

Novel oligonuclear complexes of Co(II), Ni(II), and Cu(II) with 4-(3,4-dichlorophenyl)-1,2,4-triazole (L) of the composition [M₃L₁₀(H₂O)₂](NO₃)₆ (M = Co(II), Ni(II)), [Ni₃L₆(H₂O)₆]Hal₆ (Hal = Cl^?, Br^?), and [Cu₅L₁₆(H₂O)₂](NO₃)₁₀ · 2H₂O were synthesized and studied by magnetic susceptibility, electronic and IR spectroscopy, and powder X-ray diffraction methods. All the above complexes are X-ray amorphous. Antifer-romagnetic exchange interactions between the M²⁺ ions were discovered in the [Co₃L₁₀(H₂O)₂](NO₃)₆ and [Ni₃L₁₀(H₂O)₂](NO₃)₆ complexes, whereas ferromagnetic exchange interactions were observed in the complexes [Ni₃L₆(H₂O)₆]Cl₆, [Ni₃L₆(H₂O)₆]Br₆, and [Cu₅L₁₆(H₂O)₂](NO₃)₁₀ · 2H₂O.     

From mixed group 13 cations [M(AlCp*)3]+ (M = Ga/In/Tl) to an Al4+ cluster

AlCp*-complexes with transition metals have shown to be highly reactive and enable C–H or Si–H bond activation. Yet, complexes of AlCp* with low-valent main-group metals are scarce. Here, we report the syntheses of [M(AlCp*)₃][Al(OR^F)₄] (R^F = C(CF₃)₃) with M = Ga, In, Tl, which include the first covalent Al–In and Al–Tl bonds. For M = Ga, AlCp*-coordination induced the formation of the dication [Ga₂(AlCp*)₆]²⁺ in the solid state, which exhibits a solvent and temperature dependent monomer–dimer equilibrium in solution. By contrast, the In and Tl complexes are monomeric and prone to reduction to the metal by the electron-rich AlCp*-moieties. The QTAIM analysis suggests that the metal centres are already highly reduced in the complexes, while the positive charge is distributed onto the AlCp* units. Addition of Me₃TACN (1,4,7-trimethyl-1,4,7-triazacyclononane) to the Ga- and Tl-complex salts resulted in an isomerization to the novel low-valent Al₄⁺ cation [(Me₃TACN)Al(AlCp*)₃][Al(OR^F)₄]. Intermittently formed tetrahedral GaAl₃⁺ clusters could be structurally characterized. From a detailed mechanistic study of this isomerization, the very high yield and clean preparation of [(Me₃TACN)Al(AlCp*)₃][Al(OR^F)₄] was devised from [M(Me₃TACN)][Al(OR^F)₄] (M = Ga, Tl) and [(AlCp*)₄].

Mixed low-valent group 13 cations with formally reduced metal atoms have been prepared via addition of [(AlCp*)₄] to the low-valent cation salts of Ga, In and Tl. Addition of an aza-crown ether resulted in isomerization to a novel Al₄⁺ cluster.     

Phosphenium-übergangsmetallkomplexe: XX. Stabilisierung von mesitylphosphiniden durch ein Cp(CO)2W- und ein Cp(CO)2 Fe-Fragment

The reaction of the secondary metallo-phosphanes Cp(CO)₂(L)W-PH(Mes) (L  CO, PMe₃) (1a,b) with the iron complex [Cp(CO)₃Fe]BF₄ (2) or Cp(CO)2Fe-I (3), respectively, affords the ferrio(wolframio)phosphonium salts [Cp(CO)₂(L)W-P(Mes)-Fe(CO)₂Cp]X (X  I (4a), BF₄ (4b). Deprotonation of 4a, b with DBU results, in both cases, in the selective formation of a WP bond owing to additional CO- or Me₃P-elimination to give the phosphinidene complex Cp(CO)₂WP(Mes)-Fe(CO)₂Cp (6).     

<Superscript>27</Superscript>Al NMR Study of the Metal Cluster Compound Al<Subscript>50</Subscript>C<Subscript>120</Subscript>H<Subscript>180</Subscript>

We present an ²⁷Al NMR study of the metal cluster compound Al₅₀Cp*₁₂ which is composed of (identical) Al₅₀ clusters, each surrounded by a Cp* ligand shell, and arranged in a crystalline 3D array (here Cp* = pentamethylcyclopentadienyl = C₅(CH₃)₅). The compound is found to be non-conducting, the nuclear spin-lattice relaxation in the temperature range 100–300 K being predominantly due to reorientational motions of the Cp* rings. These lead to a pronounced maximum in the relaxation rate at T ∼ 170 K, corresponding to an activation energy of about 850 K. Data for the related compound Al₄Cp*₄, containing very much smaller Al₄ clusters are also presented. A comparison is drawn with the quadrupolar relaxation recently observed for the non-conducting fraction of Ga₈₄ molecules in the metal cluster compound Ga₈₄[N(SiMe₃)₂]₂₀-Li₆Br₂(thf)₂₀·2toluene. It is our pleasure to dedicate this paper to our colleague professor Günter Schmid at the occasion of his 70th birthday.