A fourfold interpenetrating cadmium(II) metal–organic framework based on 2,4,6‐tris(pyridin‐4‐yl)‐1,3,5‐triazine with reversible photochromic properties

2,4,6‐Tris(pyridin‐4‐yl)‐1,3,5‐triazine (tpt), as an organic molecule with an electron‐deficient nature, has attracted considerable interest because of its photoinduced electron transfer from neutral organic molecules to form stable anionic radicals. This makes it an excellent candidate as an organic linker in the construction of photochromic complexes. Such a photochromic three‐dimensional (3D) metal–organic framework (MOF) has been prepared using this ligand. Crystallization of tpt with Cd(NO₃)₂·4H₂O in an N,N‐dimethylacetamide–methanol mixed‐solvent system under solvothermal conditions afforded the 3D MOF poly[[bis(nitrato‐κ²O,O′)cadmium(II)]‐μ₃‐2,4,6‐tris(pyridin‐4‐yl)‐1,3,5‐triazine‐κ³N²:N⁴:N⁶], [Cd(NO₃)₂(C₁₈H₁₂N₆)]_n, which was characterized by IR spectroscopy, elemental analysis, thermogravimetric analysis and single‐crystal X‐ray diffraction. The X‐ray diffraction crystal structure analysis reveals that the asymmetric unit contains one independent Cd^II cation, one tpt ligand and two coordinated NO₃^? anions. The Cd^II cations are connected by tpt ligands to generate a 3D framework. The single framework leaves voids that are filled by mutual interpenetration of three independent equivalent frameworks in a fourfold interpenetrating architecture. The compound shows a good thermal stability and exhibits a reversible photochromic behaviour, which may originate from the photoinduced electron‐transfer generation of radicals in the tpt ligand.     

Multinuclear NMR Characterization of Cyanuric Fluoride (2,4,6‐Trifluoro‐1,3,5‐triazine)

Although 2,4,6‐trifluoro‐1,3,5‐triazine, C₃F₃N₃, is a highly symmetrical molecule, its NMR parameters can be obtained by reducing its symmetry through the introduction of ¹⁴N/¹⁵N and ¹²C/¹³C isotopomers. Experimental and computed chemical shifts of cyanuric fluoride have been obtained for ¹³C, ¹⁵N, and ¹⁹F. Spin‐spin coupling constants have been measured and compared with previous experimental data and with the complete set of computed EOM‐CCSD coupling constants.     

Two new dimeric cadmium(II) and zinc(II) sulfate complexes with 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine and 2,2:6′,2′′‐ter­pyridine

The structures of two new sulfate complexes are reported, namely di‐μ‐sulfato‐κ³O,O′:O′′‐bis{aqua­[2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine‐κ³N¹,N²,N⁶]­cadmium(II)} tetra­hydrate, [Cd₂(SO₄)₂(C₁₆H₁₂N₆)₂(H₂O)₂]·4H₂O, and di‐μ‐sulfato‐κ²O:O′‐bis­[(2,2′:6′,2′′‐ter­pyridine‐κ³N¹,N^1′,N^1′′)­zinc(II)] dihydrate, [Cd₂(SO₄)₂(C₁₅H₁₁N₃)₂]·2H₂O, the former being the first report of a Cd(tpt) complex [tpt is 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine]. Both compounds crystallize in the space group P and form centrosymmetric dimeric structures. In the cadmium complex, the metal center is heptacoordinated in the form of a pentagonal bipyramid, while in the zinc complex, the metal ion is in a fivefold environment, the coordination geometry being intermediate between square pyramidal and trigonal bipyramidal. Packing of the dimers leads to the formation of planar structures strongly linked by hydrogen bonding.     

Aqua­(thio­sulfato‐κ2O,S)[2,4,6‐tri‐2‐pyridyl‐1,3,5‐triazine‐κ3N2,N1,N6]zinc(II) hemihydrate

The title compound, [Zn(S₂O₃)(C₁₈H₁₂N₆)(H₂O)]·0.5H₂O, contains two almost identical independent monomeric moieties composed of an octa­hedral Zn centre coordinated by a tridentate 2,4,6‐tri‐­2‐pyridyl‐1,3,5‐triazine (tpt) ligand, one aqua ligand and an O,S‐chelating thio­sulfate anion. The structure is stabilized by a solvent water mol­ecule. Multiple strong hydrogen bonds with additional weaker π–π inter­actions between tpt groups define a multiple column spatial organization.     

trans‐[1,3‐Bis(2,4,6‐trimethylphenyl)imidazolidin‐2‐ylidene]dichlorido(triphenylphosphine‐κP)palladium(II)

The title complex, [PdCl₂(C₂₁H₂₆N₂)(C₁₈H₁₅P)], shows slightly distorted square‐planar coordination around the Pd^II metal centre. The Pd—C bond distance between the N‐heterocyclic ligand and the metal atom is 2.028 (5) Å. The dihedral angle between the two trimethylphenyl ring planes is 36.9 (2)°.     

Metal‐Free Multicomponent Synthesis of (α‐Aminoalkyl)phosphonates Using 2,4,6‐Trichloro‐1,3,5‐triazine

(α‐Aminoalkyl)phosphonates have efficiently been synthesized by multicomponent reaction of aldehydes, amines, and triethyl phosphite in the presence of 2,4,6‐trichloro‐1,3,5‐triazine at room temperature. The products are formed in high yields (83–91%) within 0.5–1 h.     

Comparative theoretical synthesis of high‐energy density materials 2,4,6‐trinitro‐1,3,5‐triazine

In this study, the optimal synthetic route for 2,4,6‐trinitro‐1,3,5‐triazine (TNTA) was investigated. The synthesis of TNTA was performed using cyanamide (H₂NCN) as a starting material. In the first stage, a radical addition reaction was used to generate melamine, which is the precursor of TNTA. In addition, a gaseous nitration reaction using nitrogen dioxide radicals (^?NO₂) as the nitration agent was used to gradually induce radical substitutions to convert dicyandiamide (H₂NCN)₂ to melamine (H₂NCN)₃. Additional nitration steps lead to triaminocyanide and, ultimately, TNTA. In addition, nitryl cyanide (O₂NCN) was also tested as a starting material for radical addition to generate dinitryl cyanide (O₂NCN)₂, trinitryl cyanide (O₂NCN)₃, and, finally, TNTA. The activation energy barrier in each of the reaction steps as well as the various synthetic routes were compared to provide insight into the design of more feasible routes for the synthesis of TNTA. © 2014 Wiley Periodicals, Inc.     

Unprecedented Trinuclear AgI Complex with 2,4,6‐Tris(2‐pyrimidyl)‐1,3,5‐triazine as an Efficient Catalyst for the Aziridination of Olefins

An unprecedented trinuclear heteroleptic Ag^I complex was isolated using a stable multidentate 2,4,6‐tris(2‐pyrimidyl)‐1,3,5‐triazine (TPymT) ligand. The obtained compound is an efficient catalyst for the direct aziridination of terminal olefins.     

Synthesis and luminescence characteristics of conjugated dendrimers with 2,4,6‐triaryl‐1,3,5‐triazine periphery

We have synthesized conjugated dendrimer with triazine peripheries, and their luminescence properties were investigated. The dendrimers consist of dendritic triazine wedges for electron transport, distyrylbenzene core as an emitting moiety, and t‐butyl peripheral groups for good processing properties. The dendrimers have LUMO values of about ?2.7 eV possibly because of the triazine moiety with high electron affinity. Photoluminescence study indicates that energy transfer occurs from the triazine wedges to the stilbene bridge, and finally to the core chromophore units due to a cascade decrease of bandgap from the peripheral wedge to core moiety. Therefore, the emission wavelength was determined by the structure of the core unit. The energy transfer efficiency of distyrylbenzene‐cored dendrimers was about 75 and 55% for Trz‐1GD‐DSB and Trz‐2GD‐DSB, respectively. A preliminary electroluminescence property also was investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 254–263, 2006     

[Sm(NO3)3(TPTZ)(H2O)]·2H2O [TPTZ is 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine]

The title compound, aqua­tris­(nitrato)[2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine]samarium dihydrate, [Sm(NO₃)₃­(C₁₈H₁₂N₆)­(H₂O)]·­2H₂O, was prepared from Sm(NO₃)₃·6H₂O and 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine. The metal atom is ten‐coordinate being bonded to the terdentate TPTZ ligand, three bidentate nitrates and a water mol­ecule.     

Linear π‐conjugated polymers containing 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit: Synthesis and optical properties

Some linear π‐conjugated polymers containing 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit were synthesized via Sonogashira or Suzuki reaction for the first time and characterized by IR, NMR, and GPC. Because of the introduction of 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit into π‐conjugated system, all polymers exhibited good thermal stability with high decomposition temperature. Their optical and electrochemical properties were investigated. Based on the 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit linked with different aromatic rings, the polymers showed the tunable fluorescence from blue to blue‐green emission with satisfied quantum yield. Cyclic voltammetry measurement indicated that the LUMO and HOMO levels of the polymers could be adjustable through the main‐chain structural modification. All polymers had low LUMO level (?2.86 to ?3.06 eV) due to the high‐electron affinity of triazine unit. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 702–712, 2008     

2‐Chloro‐4,6‐di­methoxy‐1,3,5‐triazine

The mol­ecules of 2‐chloro‐4,6‐di­methoxy‐1,3,5‐triazine, C₅H₆ClN₃O₂, lie on a crystallographic mirror plane. There is a close contact of 3.180 (3) Å between one of the methyl C atoms and the N atom of a neighboring mol­ecule. Differential scanning calorimetry measurements show that methyl rearrangement does not take place in the solid state, despite the close proximity of the methyl group to the N atom.     

A novel (3,4,10)‐connected three‐dimensional hydrogen‐bonded supramolecular network containing a cyclic water hexamer

The title compound, 4,4′‐(1,1,1,3,3,3‐hexafluoroisopropylidene)diphthalic acid hexahydrate, C₁₉H₁₀F₆O₈·6H₂O, crystallizes in the centrosymmetric space group Pbcn, with half of the diphthalic acid residue and three water molecules in the asymmetric unit. The organic molecule is located on a crystallographic twofold axis. In the solid, cyclic water hexamers in chair conformations have crystallographically imposed inversion symmetry. Strong O—H...O hydrogen bonds between the hexamers and organic molecules result in a unique three‐dimensional supramolecular network [O...O = 2.554 (2)–2.913 (2) Å]. This compound represents the first example of a (3,4,4,10)‐connected four‐nodal supramolecular topology with the Schläfli symbol (4³.5.6.7)₂(4³.5².7)₂(4³)₂(4⁶.5⁶.6².7⁸.8¹⁴.9⁹).     

One‐Pot Three‐Component Synthesis of α‐Amino Nitriles Catalyzed by 2,4,6‐Trichloro‐1,3,5‐triazine (Cyanuric Acid)

A simple and efficient method has been developed for the synthesis of α‐amino nitriles from aldehydes, amines and trimethylsilyl cyanide (Me₃SiCN) in the presence of a catalytic amount of cyanuric acid at room temperature.     

DFT Study of the Group Interactions in 1,3,5‐Triamino‐2,4,6‐Trinitrobenzene and 1,3,5‐Triamino‐2,4,6‐Tridifluoroaminobenzene

Density functional calculations on isodesmic disproportionation reactions of 1,3,5‐triamino‐2,4,6‐trinitrobenzene (TATB) and 1,3,5‐triamino‐2,4,6‐tridifluoroaminobenzene (TATDB) indicate that the interaction between nitro groups on meta carbons of TATB, which brings about unstability to the molecule, is surprisingly larger than that between difluroamino groups in TATDB. The electron‐withdrawing and electron‐donating groups generate large positive and very small negative values of E_{disproportion}, respectively. When both electron‐withdrawing and electron‐donating groups are attached to the benzene skeleton at the same time, large negative disproportionation energy is produced, which stabilizes the derivatives. The values of E_{disproportion} for TATB and TATDB are predicted to be ‐48.03 kJ/mol and ‐63.54 kJ/mol, respectively, indicating that the total interaction among groups with stabilization effects in TATDB is larger than that in TATB. The large difference of the E_{disproportion} values between TATB and TATDB is derived from the large difference between the interactions of the meta‐nitro group and those of meta‐difluoroamino groups. The energy barriers for the C‐N internal rotation of NO₂ group and NF₂ groups are 74.7 kJ/mol and 185.8 kJ/mol for TATB and TATDB, respectively. The large energy barrier for the rotation of the NF₂ group is caused by its stabilization interaction with neighbor amino groups, instead of steric effects. When the number of pairs of amino‐nitro or amino‐difluoroamino groups increases, there are more negative charges on the NO₂/NF₂ groups and on the O/F atoms.     

Synthesis and Crystal Structure of [Pb(trz)(tfpb)(H2O)]: a Lead(II) Complex Containing 2,4,6‐Tris(2‐pyridyl)‐1,3,5‐triazine and 4,4,4‐Trifluoro‐1‐phenyl‐1,3‐butandionate

[Pb(trz)(tfpb)(H₂O)] ( 1 ) (trz and tfpb are the abbreviations of 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine and 4,4,4‐trifluoro‐1‐phenyl‐1,3‐butandionate, respectively) have been synthesized and characterized by elemental analysis and IR, ¹H NMR, spectroscopy. The single‐crystal structure of 1 shows the coordination number of the Pb²⁺ ions is eight with three N‐donor atoms from a “trz” ligand and four O‐donors from the dionate ligand and one molecule of water. The supramolecular features in this complex are guided by lone pair activity and control of strong hydrogen bonds, weak directional intermolecular interactions and aromatic π‐π stacking interactions.     

Practical syntheses of [1,3,5]‐triazine dendritic molecules on solid supports

A practical and divergent synthesis of supported [1,3,5]‐triazine dendritic molecules on Wang resin, PEGA resin, SynPhase? Lanterns, and silica gel is described. The alkylamine linkers used allow derivatization with functionality for both synthetic (e.g., supported reagent and scavenger activity) and chemical biology applications. The use of supported intermediates allows differentiation of symmetric linkers without the need for protecting group chemistry. The synthetic route uses inexpensive, readily available starting materials in a straightforward and scaleable strategy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2248–2259, 2006     

The effect of external forces on the initial dissociation of RDX (1,3,5‐trinitro‐1,3,5‐triazine): A mechanochemical study

Experimental and theoretical studies have proposed different initiation reactions for the decomposition of hexahydro‐1,3,5‐trinitro‐1,3,5‐triazine (RDX). Three primary reactions are considered to start RDX decomposition: homolytic N? N bond fission, HONO elimination, and concerted fission of C? N bonds. The focus of this article is to study the effect of external forces on the energy barrier and reaction energies of all three mechanisms. We used the Nudged Elastic Band method along with ab initio Density Functional Theory within the framework of a generalized force‐modified potential energy surface (G‐FMPES) to calculate the minimum energy paths at different compressive (corresponding to pressure between approximately 6 and 294 MPa) and expansive force values (between 10 and 264 pN). For all three reactions, the application of an expansive force increases the exothermicity and lowers the energy barriers to different extents, while a compressive force decreases the exothermicity and raises the energy barrier to different extents.     

Di‐μ2‐sulfito‐κ8O,O′:O′,O′′‐bis[(2,4,6‐tri‐2‐pyrid­yl‐1,3,5‐triazine‐κ3N2,N1,N6)cadmium(II)] octa­hydrate

The title compound, [Cd₂(SO₃)₂(C₁₈H₁₂N₆)₂]·8H₂O, is a dimer built up around a symmetry center, where the sulfite anion displays a so far unreported coordination mode in metal‐organic complexes; the anion binds as a μ₂‐sulfite‐κ⁴O,O′:O′,O′′ ligand to two symmetry‐related seven‐coordinate Cd^II cations, binding through its three O atoms by way of two chelate bites with an O atom in common, which acts as a bridge. The cation coordination is completed by a 2,4,6‐tri‐2‐pyridyl‐1,3,5‐triazine ligand acting in its usual tridentate mode.     

Diamminebis(2,4,6‐tribromophenolato‐O)copper(II)

The title compound, [Cu(C₆H₂Br₃O)₂(NH₃)₂], a monomeric centrosymmetric Cu^II complex, crystallizes in the monoclinic system. The CuO₂N₂ coordination sphere is trans planar, [Cu—O 1.943 (5) Å and Cu—N 1.977 (6) Å], with the fifth and sixth coordination sites occupied by Br atoms from the phenoxide ions [Cu—Br 3.129 (1) Å], resulting in an elongated distorted octahedral structure for the CuO₂N₂Br₂ coordination. Each of the NH₃ groups forms two hydrogen bonds with the Br and O atoms of the CuO₂N₂Br₂ moiety of a neighbouring mol­ecule. This arrangement constitutes a one‐dimensional chain along the x axis of the unit cell.