Expeditious synthesis of aromatic-free piperidinium-functionalized polyethylene as alkaline anion exchange membranes

Alkaline anion exchange membranes (AAEMs) with high hydroxide conductivity and good alkaline stability are essential for the development of anion exchange membrane fuel cells to generate clean energy by converting renewable fuels to electricity. Polyethylene-based AAEMs with excellent properties can be prepared via sequential ring-opening metathesis polymerization (ROMP) and hydrogenation of cyclooctene derivatives. However, one of the major limitations of this approach is the complicated multi-step synthesis of functionalized cyclooctene monomers. Herein, we report that piperidinium-functionalized cyclooctene monomers can be easily prepared via the photocatalytic hydroamination of cyclooctadiene with piperidine in a one-pot, two-step process to produce high-performance AAEMs. Possible alkaline-degradation pathways of the resultant polymers were analyzed using spectroscopic analysis and dispersion-inclusive hybrid density functional theory (DFT) calculations. Quite interestingly, our theoretical calculations indicate that local backbone morphology—which can potentially change the Hofmann elimination reaction rate constant by more than four orders of magnitude—is another important consideration in the rational design of stable high-performance AAEMs.

Piperidinium-functionalized polyethylene-based alkaline anion exchange membranes that show high hydroxide conductivities and good alkaline stabilities are easily prepared using photocatalytic hydroamination reactions.     

The simplest Diels–Alder reactions are not endo-selective

There is a widespread perception that the high level of endo selectivity witnessed in many Diels–Alder reactions is an intrinsic feature of the transformation. In contrast to expectations based upon this existing belief, the first experimental Diels–Alder reactions of a novel, deuterium-labeled 1,3-butadiene with commonly used mono-substituted alkenic dienophiles (acrolein, methyl vinyl ketone, acrylic acid, methyl acrylate, acrylamide and acrylonitrile) reveal kinetic endo : exo ratios close to 1 : 1. Maleonitrile, butenolide, α-methylene γ-butyrolactone, and N-methylmaleimide behave differently, as does methyl vinyl ketone under Lewis acid catalysis. CBS-QB3 calculations incorporating solvent and temperature parameters give endo : exo product ratios that are in near quantitative agreement with these and earlier experimental findings. This work challenges the preconception of innate endo-selectivity by providing the first experimental evidence that the simplest Diels–Alder reactions are not endo-selective. Trends in behaviour are traced to steric and electronic effects in Diels–Alder transition structures, giving new insights into these fundamental processes.

Cycloadditions of deuterium-labeled 1,3-butadiene with monosubstituted alkenic dienophiles challenge the widespread assumption of endo-selectivity in prototypical Diels–Alder reactions.     

Mechanochemical generation of acid-degradable poly(enol ether)s

In an effort to develop polymers that can undergo extensive backbone degradation in response to mechanical stress, we report a polymer system that is hydrolytically stable but unmasks easily hydrolysable enol ether backbone linkages when force is applied. These polymers were synthesized by ring-opening metathesis polymerization (ROMP) of a novel mechanophore monomer consisting of cyclic ether fused bicyclohexene. Hydrogenation of the resulting polymers led to significantly enhanced thermal stability (T_d > 400 °C) and excellent resistance toward acidic or basic conditions. Solution ultrasonication of the polymers resulted in up to 65% activation of the mechanophore units and conversion to backbone enol ether linkages, which then allowed facile degradation of the polymers to generate small molecule or oligomeric species under mildly acidic conditions. We also achieved solid-state mechano-activation and polymer degradation via grinding the solid polymer. Force-induced hydrolytic polymer degradability can enable materials that are stable under force-free conditions but readily degrade under stress. Facile degradation of mechanically activated polymechanophores also facilitates the analysis of mechanochemical products.

A mechanically responsive polymer system that is hydrolytically stable without stress, but unmasks enol ether backbone linkages under force to allow facile hydrolytic degradation.     

Ring-opening carbonyl–olefin metathesis of norbornenes

A computational and experimental study of the hydrazine-catalyzed ring-opening carbonyl–olefin metathesis of norbornenes is described. Detailed theoretical investigation of the energetic landscape for the full reaction pathway with six different hydrazines revealed several crucial aspects for the design of next-generation hydrazine catalysts. This study indicated that a [2.2.2]-bicyclic hydrazine should offer substantially increased reactivity versus the previously reported [2.2.1]-hydrazine due to a lowered activation barrier for the rate-determining cycloreversion step, a prediction which was verified experimentally. Optimized conditions for both cycloaddition and cycloreversion steps were identified, and a brief substrate scope study for each was conducted. A complication for catalysis was found to be the slow hydrolysis of the ring-opened hydrazonium intermediates, which were shown to suffer from a competitive and irreversible cycloaddition with a second equivalent of norbornene. This problem was overcome by the strategic incorporation of a bridgehead methyl group on the norbornene ring, leading to the first demonstrated catalytic carbonyl–olefin metathesis of norbornene rings.

A computational and experimental study has uncovered a second generation hydrazine that enables the catalytic ring-opening carbonyl–olefin metathesis of norbornenes.     

Methyl 1,3-Diphenylbicyclo[1.1.0]butane-2-exo-carboxylate. new example of the thermal inversion of bicyclobutane system

A fact of a reversible thermal inversion of exo- and endo-isomers of methyl 1,3-diphenylbicyclo[1.1.0] butane-2-carboxylate was established experimentally. The equilibrium constant of the process at 126°C is 14.2 with endo-isomer prevailing. Using DFT/PBE/L22 method the geometry of the isomers was optimized and also the geometry of the previously studied related exo,exo- and endo,endo-isomers of dimethyl 1,3-diphenylbicyclo[1.1.0] butane-2,4-dicarboxylate. The energy barrier of these mutual conversions was estimated.     

Rh(i)-catalyzed stereoselective desymmetrization of prochiral cyclohexadienones via highly exo-selective Huisgen-type [3 + 2] cycloaddition

A Rh(i)-catalyzed highly stereoselective desymmetrization of 2-alkynylbenzaldehyde-tethered cyclohexadienones triggered by intramolecular Huisgen-type [3 + 2] cycloaddition has been developed. This method enables convergent construction of complex epoxy-bridged polycyclic ring systems with five contiguous stereocenters with excellent exo-selectivity and broad substrate scope. The highly atom-economical process involves 6-endo-dig cyclization of carbonyl oxygen onto an activated alkyne resulting in a highly reactive metal–benzopyrylium intermediate, which readily undergoes intramolecular [3 + 2] annulation/hydration. Asymmetric induction is also achieved for the first time in Rh(i)-catalyzed 1,3-dipolar cycloaddition using an easily accessible chiral diene as the ligand.

A Rh(i)-catalyzed highly stereoselective desymmetrization of 2-alkynylbenzaldehyde-tethered cyclohexadienones triggered by intramolecular Huisgen-type [3 + 2] cycloaddition has been developed.     

Synthesis of 2,6-dioxabicyclo[3.3.0]octenes by tandem ring-rearrangement/cross metathesis

A facile synthesis of stereodefined 2,6-dioxabicyclo[3.3.0]octene derivatives from the vinyl ether of endo-7-oxanorbornen-2-ol via tandem ring-opening/ring-closing(ring-rearrangement)/cross metathesis is reported.     

Synthesis of haloconduritols from an endo-cycloadduct of furan and vinylene carbonate

A method for preparing haloconduritols having a conduritol-A construction is described. A mixture of endo- and exo-cycloadduct derivatives prepared from the Diels-Alder reaction of furan and vinylene carbonate was converted into diacetate derivatives by hydrolysis (K₂CO₃/MeOH) followed by acetylation (Ac₂O/pyridine). Boron trihalide (BBr₃ or BCl₃)-assisted ring-opening of the endo-diacetate in CH₂Cl₂ at −78°C gave (1α,2α,3β,6β)-6-halogeno-4-cyclohexene-1,2,3-triol 1,2-diacetate from which the corresponding triacetate was prepared by acetylation (AcCl). trans-Esterification of the triacetate (MeOH/HCl) afforded (1α,2α,3β,6β)-6-halogeno-4-cyclohexene-1,2,3-triol (X=Br or Cl). BF₃-Assisted ring-opening of the endo-diacetate in CH₂Cl₂ gave (1α,2α,3β,6β)-6-chloro-4-cyclohexene-1,2,3-triol 1,2-diacetate by means of halogen exchange.     

Synthesis and isomer distribution of 2-alkyltropinones and 2-alkylgranatanones

Tropinone (8-methyl-8-azabicyclo[3.2.1]octan-3-one) metal (Li, Na, K, Mg) enolates were used to achieve α-alkylation. The reactions, regardless of the metal or conditions used, were low-yielding. N,N-Dimethylhydrazones of tropinone and granatanone (pseudopelletierine, 9-methyl-9-azabicyclo[3.3.1]nonan-3-one) were prepared and α-alkylated using n-butyllithium as the lithiating reagent. Lithium amides, including a polymer-supported lithium amide, were less effective. The reactions were modelled using DFT calculations at the B3LYP 6-31G(d) level and the CPCM solvent model, revealing that the face-selective alkylations of tropinone and granatanone hydrazones favoured the exo-isomers. Granatanone and α-isopropyl tropinone derivatives resisted typical mild hydrolytic hydrazone cleavage (aqueous trifluoroacetic acid) and required more forceful conditions (p-TsOH, boiling dioxane). Using the hydrazone alkylation strategy, 16 α-alkyl derivatives (benzyl, methyl, propyl, isopropyl, allyl, pentyl, heptyl, p-methoxybenzyl) were prepared in 52–90% yields overall. For the α-alkylated tropinones and granatanones (10 examples), the DFT calculations and experimental thermodynamic distributions in base catalysed equilibrations showed that except for the α-isopropyl derivatives, the endo-isomers were more stable than the exo-isomers and were the major products. For 2-isopropyltropinone, the bulky substituent favoured the exo (axial) position in the bicyclic skeleton. The thermodynamic distribution for the α,α′-dibenzyl tropinone isomers was also evaluated.     

Ring-opening metathesis polymerization for the preparation of norbornene-based weak cation-exchange monolithic capillary columns

Functionalized monolithic columns were prepared via ring-opening metathesis polymerization (ROMP) within silanized fused silica capillaries with an internal diameter of 200 μm by in situ grafting. This procedure is conducted in two steps, the first of which is the formation of the basic monolithic structure by polymerization of norborn-2-ene (NBE) and 1,4,4a,5,8,8a-hexahydro-1,4,5,8-exo,endo-dimethanonaphthalene (DMN-H6) in a porogenic system (toluene and 2-propanol) using RuCl₂(PCy₃)₂(CHPh) as ROMP initiator. In the second step the still active initiator sites located on the surface of the structure-forming microglobules were used as receptor groups for the attachment (“grafting”) of functional groups onto the monolithic backbone by flushing the monolith with 7-oxanorborn-2-ene-5,6-carboxylic anhydride (ONDCA). Functionalization conditions were first defined that did not damage the backbone of low polymer content (20%) monoliths allowing high-throughput chromatographic separations. Variation of the functionalization conditions was then shown to provide a means of controlling the degree of functionalization and resulting ion-exchange capacity. The maximum level of in situ ONDCA grafting was obtained by a 3 h polymerization in toluene at 40 °C. The weak cation-exchange monoliths obtained provided good separation of a standard peptide mixture comprising four synthetic peptides designed specifically for the evaluation of cation-exchange columns. An equivalent separation was also achieved using the lowest capacity column studied, indicative of a high degree of robustness of the functionalization procedure. As well as demonstrably bearing ionic functional groups enabling analyte separation in the cation-exchange mode, the columns exhibited additional hydrophobic characteristics which influenced the separation process. The functionalized monoliths thus represent useful tools for mixed-mode separations.     

Cure characterization and viscosity development of ring-opening metathesis polymerized resins

The ring-opening metathesis polymerization (ROMP) kinetics of three different norbornene-based monomers, ethylidene norbornene (ENB), endo-dicyclopentadiene (DCPD) and exo-DCPD, in the presence of Grubbs’ catalyst are examined using differential scanning calorimetry and rheokinetic viscosity measurements. Several different parameters were considered, such as, the monomer healing agents (including different monomer mixtures), the catalyst concentration, and test temperature to determine how these parameters influence cure development. The polymerization kinetics, quantified by exothermic peak locations in the case of differential scanning calorimetry and rheokinetic transition times in the case of viscosity measurements, are shown to be highly dependent on monomer type and catalyst concentration. The ENB monomer had the fastest kinetics even at the lowest catalyst concentration compared to the other diene monomers and mixtures.     

First FT-Raman and H NMR comparative investigations in ring opening metathesis polymerization

Kinetics of ring-opening metathesis polymerization (ROMP) of exo,exo-5,6-di(methoxycarbonyl)-7-oxabicyclo[2.2.1]hept-2-ene, promoted by the Grubbs’ 1st generation precatalyst, has been effectively monitored by FT-Raman and NMR spectroscopy. Both techniques evidenced similar monomer conversions to be attained under the same reaction conditions. The present FT-Raman study provided information on the polymer steric configuration, the Raman bands at 1670 and 1677 cm⁻¹ being specifically assigned to stretching vibrations of double bonds from the cis- and trans-polymer, respectively. The trans/cis ratio observed by FT-Raman parallels the corresponding result from ¹H NMR. For the first time, a comparison was made on application of these complementary methods on the same ROMP reaction, evidencing their assets and disadvantages and reliability of FT-Raman.     

Precise Synthesis and Thin Film Self-Assembly of PLLA-b-PS Bottlebrush Block Copolymers

The ability of bottlebrush block copolymers (BBCPs) to self-assemble into ordered large periodic structures could greatly expand the scope of photonic and membrane technologies. In this paper, we describe a two-step synthesis of poly(l-lactide)-b-polystyrene (PLLA-b-PS) BBCPs and their rapid thin-film self-assembly. PLLA chains were grown from exo-5-norbornene-2-methanol via ring-opening polymerization (ROP) of l-lactide to produce norbornene-terminated PLLA. Norbonene-terminated PS was prepared using anionic polymerization followed by a termination reaction with exo-5-norbornene-2-carbonyl chloride. PLLA-b-PS BBCPs were prepared from these two norbornenyl macromonomers by a one-pot sequential ring opening metathesis polymerization (ROMP). PLLA-b-PS BBCPs thin-films exhibited cylindrical and lamellar morphologies depending on the relative block volume fractions, with domain sizes of 46–58 nm and periodicities of 70–102 nm. Additionally, nanoporous templates were produced by the selective etching of PLLA blocks from ordered structures. The findings described in this work provide further insight into the controlled synthesis of BBCPs leading to various possible morphologies for applications requiring large periodicities. Moreover, the rapid thin film patterning strategy demonstrated (>5 min) highlights the advantages of using PLLA-b-PS BBCP materials beyond their linear BCP analogues in terms of both dimensions achievable and reduced processing time.     

Tandem sequential catalytic enantioselective synthesis of highly-functionalised tetrahydroindolizine derivatives

An isothiourea-catalysed enantioselective synthesis of novel tetrahydroindolizine derivatives is reported through a one-pot tandem sequential process. The application of 2-(pyrrol-1-yl)acetic acid in combination with either a trifluoromethyl enone or an α-keto-β,γ-unsaturated ester in an enantioselective Michael addition–lactonisation process, followed by in situ ring-opening and cyclisation, led to a range of 24 tetrahydroindolizine derivatives containing three stereocentres in up to >95 : 5 dr and >99 : 1 er.

The isothiourea-catalysed enantioselective synthesis of tetrahydroindolizine derivatives containing three stereocentres is reported through a one-pot tandem sequential process.     

Stereoelectronic and dynamical effects dictate nitrogen inversion during valence isomerism in benzene imine

Benzene imine (1) ⇌ 1H-azepine (2) isomerization occurs through sequential valence and endo–exo isomerism. Quantum chemical and quasiclassical trajectory (QCT) simulations reveal the coupled reaction pathway – ring-expansion followed by N-inversion to the most stable isomer, exo-1H-azepine (Exo-2). Direct-dynamics produce a mixture of endo- and exo-1H-azepine stereoisomers and govern the endo-1H-azepine (Endo-2) ⇌ exo-1H-azepine (Exo-2) ratio. Exo-2 is computationally identified as the most stable product while Endo-2 is fleetingly stable with a survival time (S_T) ∼50 fs. N-Methyl substitution exclusively results in an exo-1-methyl-1H-azepine isomer. F-substitution at the N-site increases the barrier for N-inversion and alters the preference by stabilizing Endo-2. Interestingly, the exo-1-fluoro-1H-azepine (minor product) is formed through bifurcation via non-statistical dynamics. A highly concaved Arrhenius plot for 1a → 2a highlights the influence of heavy-atom tunneling on valence isomerism, particularly at low temperatures. Heavy-atom tunneling also results in a normal N–H(D) secondary KIE above 100 K even though the increase in hybridization from sp² to sp³ at nitrogen should cause an inverse KIE classically.

Non-classical processes such as heavy-atom tunneling and post transition-state dynamics govern stereoselectivity for benzene imine ⇌ 1H-azepine.     

Pd-catalyzed stereoselective tandem ring-opening amination/cyclization of vinyl γ-lactones: access to caprolactam diversity

A stereoselective amination/cyclization cascade process has been developed that allows for the preparation of a series of unsaturated and substituted caprolactam derivatives in good yields. This conceptually novel protocol takes advantage of the easy access and modular character of vinyl γ-lactones that can be prepared from simple precursors. Activation of the lactone substrate in the presence of a suitable Pd precursor and newly developed phosphoramidite ligand offers a stereocontrolled ring-opening/allylic amination manifold under ambient conditions. The intermediate (E)-configured ε-amino acid can be cyclized using a suitable dehydrating agent in an efficient one-pot, two-step sequence. This overall highly chemo-, stereo- and regio-selective transformation streamlines the production of a wide variety of modifiable and valuable caprolactam building blocks in an operationally attractive way.

A Pd-mediated stereoselective tandem process has been developed towards a large variety of functional caprolactam synthons.     

Olefin metathesis polymerization: Some recent developments in the precise polymerizations for synthesis of advanced materials (by ROMP,ADMET)

Recent results for synthesis of end-functionalized polymers (EFP) by using olefin metathesis polymerization have been introduced including basic characteristics in ring-opening metathesis polymerization (ROMP) of cyclic olefins and acyclic diene metathesis (ADMET) polymerization for synthesis of conjugated polymers. Several approaches were demonstrated for synthesis of EFP by living ROMP using molybdenum (exclusive coupling with aldehyde) and ruthenium catalysts (sacrificial ROMP, chain transfer). Cis specific (Z selective) ROMPs were achieved by molybdenum, ruthenium, and vanadium catalysts by the ligand modification. The catalytic synthesis of EFP with high cis selectivity has been achieved by combined ROMP with chain transfer by V(CHSiMe₃)(N-2,6-Cl₂C₆H₃)[OC(CF₃)₃](PMe₃)₂. The ADMET polymerization using molybdenum and ruthenium catalysts afforded defect-free, high molecular weight poly(arylene vinylene)s containing all trans olefinic double bonds. The methods for precise synthesis of EFPs, exhibiting unique optical properties combined with the end groups, were developed. The catalytic one-pot syntheses for EFPs have also been developed.     

Experimental and DFT study of the aza-Diels-Alder reaction between cyclopentadiene and protonated benzylimine derivated from glyoxylates

The Diels-Alder reaction of protonated N-benzyl imine of methyl glyoxylate with cyclopentadiene in different solvents gave mixtures of exo/endo adducts. The exo/endo selectivity of the reaction was elucidated by NMR experiments. Theoretical calculations by means of density functional theory (DFT) at the B3LYP/6-31G(d) level have also been performed to elucidate the molecular mechanism of this reaction. The DFT results suggest a highly asynchronous concerted mechanism, which in turn can explain the preferred exo stereoselectivity of the reaction. Inclusion of solvent effects enhances the exo selectivity, and this effect increases with the polarity of the solvent, in good agreement with the experimental findings.     

(η3-allyl)palladium(II) catalysts for the addition polymerization of norbornene derivatives with functional groups

Cycloaliphatic polyolefins with functional groups were prepared by the Pd(II)-catalyzed addition polymerization of norbornene derivatives. Homo- and copolymers containing repeating units based on bicyclo[2.2.1] hept-5-en-2-ylmethyl decanoate (endo/exo-ratio = 80/20), bicyclo[2.2.1]hept-5-ene-2-carboxylic acid methyl ester (exo/endo = 80/20), bicyclo[2.2.1]hept-5-ene-2-methanol (endo/exo = 80/20), and bicyclo[2.2.1]hept-5-ene-2-carboxylic acid (100% endo) were prepared in 49–99% yields with {(η³-allyl)Pd(BF₄)} and {(η³-allyl)Pd(SbF₆)} as catalysts. The catalyst containing the hexafluoroantimonate ion was slightly more active than the tetrafluoroborate based Pd-complex.     

A new synthetic route to substituted 1-fluoro-1-cyclopropanecarboxylates

Substituted 6-fluoro-2,4-dioxo-3-azabicyclo[3.1.0]hexane-6-carboxylates were obtained as a mixture of the exo- and endo-isomers by reaction of substituted 6,8-dioxo-2,3,7-triazabicyclo[3.3.0]oct-3-en-4-carboxylates with N-fluoropyridinium tetrafluoroborate.