2,2′‐(1,2‐Ethanediyldithio)bis(1,3‐benzothiazole)

In the title compound, C₁₆H₁₂N₂S₄, which is the result of the S‐alkyl­ation reaction of 2‐mercapto­benzo­thia­zole with ethyl­ene dibromide, the planes of the two benzo­thia­zole moieties form a dihedral angle of 3.84 (14)°. The bridging chain moiety, –SCH₂CH₂S–, adopts an antiperiplanar conformation. There are intermolecular S⃛S non‐bonded contacts of 3.6471 (9) Å, which stabilize the crystal packing.     

Cobalt(II) and cobalt(III) complexes with 4′‐(4‐cyanophenyl)‐2,2′:6′,2′′‐terpyridine

4′‐Cyanophenyl‐2,2′:6′,2′′‐terpyridine (cptpy) was employed as an N,N′,N′′‐tridentate ligand to synthesize the compounds bis[4′‐(4‐cyanophenyl)‐2,2′:6′,2′′‐terpyridine]cobalt(II) bis(tetrafluoridoborate) nitromethane solvate, [Co^II(C₂₂H₁₄N₄)₂](BF₄)₂·CH₃NO₂, (I), and bis[4′‐(4‐cyanophenyl)‐2,2′:6′,2′′‐terpyridine]cobalt(III) tris(tetrafluoridoborate) nitromethane sesquisolvate, [Co^III(C₂₂H₁₄N₄)₂](BF₄)₃·1.5CH₃NO₂, (II). In both complexes, the cobalt ions occupy a distorted octahedral geometry with two cptpy ligands in a meridional configuration. A greater distortion from octahedral geometry is observed in (I), which indicates a different steric consequence of the constrained ligand bite on the Co^II and Co^III ions. The crystal structure of (I) features an interlocked sheet motif, which differs from the one‐dimensional chain packing style present in (II). The lower dimensionality in (II) can be explained by the disturbance caused by the larger number of anions and solvent molecules involved in the crystal structure of (II). All atoms in (I) are on general positions, and the F atoms of one BF₄⁻ anion are disordered. In (II), one B atom is on an inversion center, necessitating disorder of the four attached F atoms, another B atom is on a twofold axis with ordered F atoms, and the C and N atoms of one nitromethane solvent molecule are on a twofold axis, causing disorder of the methyl H atoms. This relatively uncommon study of analogous Co^II and Co^III complexes provides a better understanding of the effects of different oxidation states on coordination geometry and crystal packing.     

Bis[S‐6‐(2,2:6′,2′′‐terpyridin‐4′‐yloxy)hexyl thioacetate]manganese(II) bis(hexafluorophosphate)

The structure of a manganese(II) complex of terpyridine functionalized with acetylsulfanyl‐terminated hexyloxy chains, [Mn(C₂₃H₂₅N₃O₂S)₂](PF₆)₂, is described. This type of complex is of interest in the study of single‐molecule transport properties in open‐shell systems. The manganese coordination environment is distorted octahedral but, importantly, with no larger deviations from the idealized geometry than those observed for other metal–terpyridine complexes. The Mn—N bond lengths range from 2.192 (2) to 2.272 (3) Å. The title compound crystallizes with the cation and anions all on general positions, with the hexafluorophosphate anions exhibiting orientational disorder. When compared with other bis‐terpyridine complexes, this structure demonstrates that manganese(II) is no more prone to undergo low‐symmetry distortions than systems with ligand field stabilization energy contributions.     

Bis[μ3‐cis‐N‐(2‐aminopropyl)‐N′‐(2‐carboxylatophenyl)oxamidato(3–)]bis(2,2′‐bipyridine)dichloridotetracopper(II) dihydrate

The title complex, bis[μ₃‐cis‐N‐(2‐aminopropyl)‐N′‐(2‐carboxylatophenyl)oxamidato(3−)]‐1:2:4κ⁷N,N′,N′′,O:O′,O′′:O′′′;2:3:4κ⁷O′′′:N,N′,N′′,O:O′,O′′‐bis(2,2′‐bipyridine)‐2κ²N,N′;4κ²N,N′‐dichlorido‐1κCl,3κCl‐tetracopper(II) dihydrate, [Cu₄(C₁₂H₁₂N₃O₄)₂Cl₂(C₁₀H₈N₂)₂]·2H₂O, consists of a neutral cyclic tetracopper(II) system having an embedded centre of inversion and two solvent water molecules. The coordination of each Cu^II atom is square‐pyramidal. The separations of Cu^II atoms bridged by cis‐N‐(2‐aminopropyl)‐N′‐(2‐carboxylatophenyl)oxamidate(3−) and carboxyl groups are 5.2096 (4) and 5.1961 (5) Å, respectively. A three‐dimensional supramolecular structure involving hydrogen bonding and aromatic stacking is observed.     

Synthesis and characterization of novel polyimides with 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide

2,2‐Bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide (6FADAP), containing fluorine and phthalimide moieties, was synthesized via the Williamson ether condensation reaction from 1‐chloro‐4‐nitrobenzene and phenolphthalein‐3′,5′‐bis(trifluoromethyl)anilide, which was followed by hydrogenation. Monomers such as 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐anilide containing phthalimide groups and 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein containing only phthalein moieties were also synthesized for comparison. The monomers were first characterized by Fourier transform infrared (FTIR), ¹H NMR, ¹⁹F NMR, elemental analysis, and titration and were then used to prepare polyimides with 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride. The polyimides were designed to have molecular weights of 20,000 g/mol via off‐stoichiometry and were characterized by FTIR, NMR, gel permeation chromatography (GPC), differential scanning calorimetry, and thermogravimetric analysis. Their solubility, water absorption, dielectric constant, and refractive index were also evaluated. The polyimides prepared with 6FADAP, containing fluorine and phthalimide moieties, had excellent solubility in N‐methylpyrrolidinone, N,N‐dimethylacetamide, tetrahydrofuran, CHCl₃, tetrachloroethane, and acetone, and GPC analysis showed a molecular weight of 18,700 g/mol. The polyimides also exhibited a high glass‐transition temperature (290 °C), good thermal stability (～500 °C in air), low water absorption (1.9 wt %), a low dielectric constant (2.81), a low refractive index, and low birefringence (0.0041). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3361–3374, 2003     

(R)‐(6,6′‐Dihydroxybiphenyl‐2,2′‐diyl)bis(diphenylphosphine oxide) methanol solvate

The title compound, C₃₆H₂₈O₄P₂·CH₄O, was synthesized directly from the methoxy analogue. The crystal structure shows that one OH group interacts with an O atom of a phosphine oxide group in an adjacent mol­ecule, while the other OH group complexes with the methanol solvent molecule via intermolecular hydrogen bonds. An O atom of one phosphine oxide group interacts with the hydroxy H atom of methanol via a hydrogen bond. There are intra‐ and intermolecular π–π interactions between the phenyl rings. All these interactions result in the formation of supramolecular chiral parallelogram channels via self‐assembly.     

2,2′‐Bipyridinium bis(perchlorate)

The title compound, [H₂bipy](ClO₄)₂ or C₁₀H₁₀N₂²⁺·2ClO₄^?, was obtained at the interface between an organic (2,2′‐bi­pyridine in methanol) and an aqueous phase (perchloric acid in water). The compound crystallizes in space group P and comprises discrete diprotonated trans‐bipyridinium cations, [H₂bipy]²⁺, and ClO₄^? anions. The cations and anions are connected through N—H?O and C—H?O hydrogen bonds [distances N?O 2.817 (4) and 2.852 (4) Å, and C?O 3.225 (6)–3.412 (5)Å]. The C—C bond distance between the two rings is 1.452 (5) Å. The bipyridinium cation has a trans conformation and the N—C—C—N torsion angle is 152.0 (3)°.     

[μ3‐cis‐N‐(2‐Aminoethyl)‐N′‐(2‐carboxylatophenyl)oxamidato(3−)]bis(2,2′‐diamino‐4,4′‐bi‐1,3‐thiazole)tetracopper(II) bis(2,4,6‐trinitrophenolate)

The title complex, [Cu₄(C₁₁H₁₀N₃O₄)₂(C₆H₆N₄S₂)₂](C₆H₂N₃O₇)₂, consists of a circular tetracopper(II) cation with an embedded inversion centre and two uncoordinated picrate (2,4,6‐trinitrophenolate) anions. The Cu^II cations at the inner sites of N‐(2‐aminoethyl)‐N′‐(2‐carboxylatophenyl)oxamidate(3−) (oxbe) have square‐planar environments and those at the outer sites are in square‐pyramidal geometries. The separations of pairs of Cu^II cations bridged by cis‐oxamide and carboxylate groups are 5.2217 (5) and 5.2871 (5) Å, respectively. The tetracopper(II) cations and picrate anions are connected by N—H...O hydrogen bonds into a two‐dimensional network parallel to the (010) plane, and these two‐dimensional networks are assembled by two types of π–π stacking interactions into a three‐dimensional supramolecular structure.     

2,2′‐(Iminodimethylene)bis(1H‐benzimidazolium)(1+) chloride

The title compound, C₁₆H₁₆N₅⁺·Cl⁻ (nbbH⁺·Cl⁻), displays N—H⋯N, N—H⋯Cl and π–π inter­actions in the crystal packing. The Cl⁻ anion is chelated by the nbbH⁺ cation via two N—H⋯Cl hydrogen bonds. Inter‐ion N—H⋯N and N—H⋯Cl hydrogen bonds link ions related by 2₁ screw axes into chains along the c axis. These chains are further linked by glide‐plane operations to generate a three‐dimensional network, which is additionally stabilized by inter­chain π–π inter­actions.     

Supramolecular interactions in a copper(II) 4′‐(4‐bromophenyl)‐2,2′:6′,2′′‐terpyridine complex

The title compound, [4′‐(4‐bromophenyl)‐2,2′:6′,2′′‐terpyridine]chlorido(trifluoromethanesulfonato)copper(II), [Cu(CF₃O₃S)Cl(C₂₁H₁₄BrN₃)], is a new copper complex containing a polypyridyl‐based ligand. The Cu^II centre is five‐coordinated in a square‐pyramidal manner by one substituted 2,2′:6′,2′′‐terpyridine ligand, one chloride ligand and a coordinated trifluoromethanesulfonate anion. The Cu—N bond lengths differ by 0.1 Å for the peripheral and central pyridine rings [2.032 (2) (mean) and 1.9345 (15) Å, respectively]. The presence of the trifluoromethanesulfonate anion coordinated to the metal centre allows Br...F halogen–halogen interactions, giving rise to the formation of a dimer about an inversion centre. This work also demonstrates that the rigidity of the ligand allows the formation of other types of nonclassical interactions (C—H...Cl and C—H...O), yielding a three‐dimensional network.     

Three‐dimensional networks in the 1:2 organic salts 2,2′‐biimidazolium bis(3‐carboxy‐4‐hydroxybenzenesulfonate) and 2,2′‐bibenzimidazolium bis(3‐carboxy‐4‐hydroxybenzenesulfonate) trihydrate

The two title compounds of 2,2′‐biimidazole (Bim) with 5‐sulfosalicylic acid (5‐H₂SSA) and 2,2′‐bibenzimidazole (Bbim) with 5‐H₂SSA are 1:2 organic salts, viz. C₆H₈N₄²⁺·2C₇H₅O₆S⁻, (I), and C₁₄H₁₂N₄²⁺·2C₇H₅O₆S⁻·3H₂O, (II). The cation of compound (I) lies on a centre of inversion, whereas that of (II) lies on a twofold axis. Whilst compound (I) is anhydrous, three water molecules are incorporated into the crystal structure of (II). The substitution of imidazole H atoms by other chemical groups may favour the incorporation of water molecules into the crystal structure. In both compounds, the component cations and anions adopt a homogeneous arrangement, forming alternating cation and anion layers which run parallel to the (001) plane in (I) and to the (100) plane in (II). By a combination of N—H...O, O—H...O and C—H...O hydrogen bonds, the ions in both compounds are linked into three‐dimensional networks. In addition, π–π interactions are observed between symmetry‐related benzene rings of Bbim²⁺ cations in (II).     

Packing effects in 4,4′‐bis(4‐hydroxy­butyl)‐2,2′‐bi­pyridine and 4,4′‐bis(4‐bromo­butyl)‐2,2′‐bi­pyridine

Structure analyses of 4,4′‐bis(4‐hydroxy­butyl)‐2,2′‐bi­pyridine, C₁₈H₂₄N₂O₂, (I), and 4,4′‐bis(4‐bromo­butyl)‐2,2′‐bi­pyridine, C₁₈H₂₂Br₂N₂, (II), reveal intermolecular hydrogen bonding in both compounds. For (I), O—H·N intermolecular hydrogen bonding leads to the formation of an infinite two‐dimensional polymer, and π stacking interactions are also observed. For (II), C—H·N intermolecular hydrogen bonding leads to the formation of a zigzag polymer. The two compounds crystallize in different crystal systems, but both mol­ecules possess C_i symmetry, with one half mol­ecule in the asymmetric unit.     

Poly[bis(μ3‐5′‐carboxy‐2,2′‐bipyridine‐5‐carboxylato‐κ4O:N,N′:O′)lead(II)]

The title compound, [Pb(C₁₂H₇N₂O₄)₂]_n, obtained by reaction of Pb(NO₃)₂ and 2,2′‐bipyridine‐5,5′‐dicarboxylic acid (H₂bptc) under hydrothermal conditions, has a structure in which the unique Pb^II cation sits on a twofold axis and is octa‐coordinated by four O‐atom donors from four Hbptc⁻ ligands and four N‐atom donors from two Hbptc⁻ ligands in a distorted dodecahedral geometry. With each Pb^II cation connected to six Hbptc⁻ ligands and each Hbptc⁻ ligand bridging three Pb^II cations, a three‐dimensional polymeric structure is formed. From a topological point of view, the three‐dimensional net is binodal, with six‐connected (the Pb^II cation) and three‐connected (the Hbptc⁻ ligand) nodes, resulting in a distorted rutile (4².8)₂(4⁴8⁹12²) topology.     

A three‐dimensional ZnII coordination framework: poly[[μ2‐(E)‐1,2‐bis(pyridin‐4‐yl)ethene][μ4‐(E)‐2,2′‐(diazene‐1,2‐diyl)dibenzoato][μ2‐(E)‐2,2′‐(diazene‐1,2‐diyl)dibenzoato]dizinc(II)]

In the title coordination polymer, [Zn₂(C₁₄H₈N₂O₄)₂(C₁₂H₁₀N₂)]_n, the asymmetric unit contains one Zn^II cation, two halves of 2,2′‐(diazene‐1,2‐diyl)dibenzoate anions (denoted L²⁻) and half of a 1,2‐bis(pyridin‐4‐yl)ethene ligand (denoted bpe). The three ligands lie across crystallographic inversion centres. Each Zn^II centre is four‐coordinated by three O atoms of bridging carboxylate groups from three L²⁻ ligands and by one N atom from a bpe ligand, forming a tetrahedral coordination geometry. Two Zn^II atoms are bridged by two carboxylate groups of L²⁻ ligands, generating a [Zn₂(CO₂)₂] ring. Each loop serves as a fourfold node, which links its four equivalent nodes via the sharing of four L²⁻ ligands to form a two‐dimensional [Zn₂L₄]_n net. These nets are separated by bpe ligands acting as spacers, producing a three‐dimensional framework with a 4⁶6⁴ topology. Powder X‐ray diffraction and solid‐state photoluminescence were also measured.     

Bis(μ‐4‐carboxy‐2‐sulfonatobenzoato)bis[aqua(2,2′‐bipyridyl)manganese(II)]

In the title compound, [Mn₂(C₈H₄O₇S)₂(C₁₀H₈N₂)₂(H₂O)₂], pairs of hexacoordinated manganese(II) centres are bridged by 2‐sulfonatoterephthalate(2−) anions to form cyclic centrosymmetric dimers, which are linked into sheets by O—H...O hydrogen bonds.     

A three‐dimensional framework in 2,2′‐biimidazolium bis(2,2′‐biimidazole‐κ2N,N′)bis(biphenyl‐2,4′‐dicarboxylato‐κO)manganese(II) hexahydrate

In the title salt, (C₆H₈N₄)[Mn(C₁₄H₈O₄)₂(C₆H₆N₄)₂]·6H₂O, the Mn^II atom lies on an inversion centre and is coordinated by four N atoms from two 2,2′‐biimidazole (biim) ligands and two O atoms from two biphenyl‐2,4′‐dicarboxylate (bpdc) anions to give a slightly distorted octahedral coordination, while the cation lies about another inversion centre. Adjacent [Mn(bpdc)₂(biim)₂]²⁻ anions are linked via two pairs of N—H...O hydrogen bonds, leading to an infinite chain along the [100] direction. The protonated [H₂biim]²⁺ moiety acts as a charge‐compensating cation and space‐filling structural subunit. It bridges two [Mn(bpdc)₂(biim)₂]²⁻ anions through two pairs of N—H...O hydrogen bonds, constructing two R₂²(9) rings, leading to a zigzag chain in the [2] direction, which gives rise to a ruffled set of [H₂biim]²⁺[Mn(bpdc)₂(biim)₂]²⁻ moieties in the [01] plane. The water molecules give rise to a chain structure in which O—H...O hydrogen bonds generate a chain of alternating four‐ and six‐membered water–oxygen R₄²(8) and R₆⁶(12) rings, each lying about independent inversion centres giving rise to a chain along the [100] direction. Within the water chain, the (H₂O)₆ water rings are hydrogen bonded to two O atoms from two [Mn(bpdc)₂(biim)₂]²⁻ anions, giving rise to a three‐dimensional framework.     

Poly[bis[μ2‐3‐(pyridin‐4‐yl)benzoato‐κ3N:O,O′]lead(II)]

In the title compound, [Pb(C₁₂H₈NO₂)₂]_n, the Pb atom sits on a crystallographic C₂ axis and is six‐coordinate, ligated by two chelating carboxylate groups from two 3‐(pyridin‐4‐yl)benzoate (L) ligands and by two N atoms from another two ligands. Each ligand bridges two Pb^II centres, extending the structure into a corrugated two‐dimensional (4,4) net. The ligand L is conformationally chiral, with a torsion angle of 27.9 (12)° between the planes of its two rings. The torsion angle has the same sense throughout the structure, so that the extended two‐dimensional polymer is homochiral. Investigation of the thermal stability shows that the network is stable up to 613 K. In the absence of any stereoselective factor in the preparation of the compound, the enantiomeric purity of the crystal studied, based only on the torsional conformation of the ligand, implies that the bulk sample is a racemic conglomerate.     

Synthesis and characterization of new highly organosoluble poly(ether imide)s based on 3,3′,5,5′‐tetramethyl‐2,2‐bis[4‐(4‐dicarboxyphenoxy)phenyl]propane dianhydride

A new bis(ether anhydride), 3,3′,5,5′‐tetramethyl‐2,2‐bis[4‐(4‐dicarboxyphenoxy)phenyl]propane dianhydride ( 3 ), was prepared in three steps: the nitro displacement of 4‐nitrophthalonitrile with 2,2‐bis(4‐hydroxy‐3,5‐dimethylphenyl)propane, the alkaline hydrolysis of the intermediate bis(ether dinitrile), and the subsequent dehydration of the resulting bis(ether diacid). A series of new highly soluble poly(ether imide)s with tetramethyl and isopropylidene groups were prepared from the bis(ether anhydride) 3 with various diamines by a conventional two‐stage synthesis including polyaddition and chemical cyclodehydration. The resulting poly(ether imide)s had inherent viscosities of 0.54–0.73 dL g^?1. Gel permeation chromatography measurements revealed that the polymers had number‐average and weight‐average molecular weights of up to 54,000 and 124,000, respectively. All the polymers showed typical amorphous diffraction patterns. All of the poly(ether imide)s showed excellent solubility and were readily dissolved in various solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, N,N‐dimethylformamide, pyridine, cyclohexanone, tetrahydrofuran, and even chloroform. Most of the polymers could be dissolved with chloroform concentrations as high as 30 wt %. These polymers had glass‐transition temperatures of 244–282 °C. Thermogravimetric analysis showed that all polymers were stable, with 10% weight losses recorded above 463 °C in nitrogen. These transparent, tough, and flexible polymer films were obtained through solution casting from N,N‐dimethylacetamide solutions. These polymer films had tensile strengths of 81–102 MPa and tensile moduli of 1.8–2.0 GPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2556–2563, 2002     

Two complexes of PtIV and AuIII with 2,2′‐dipyridylamine and 2,2′‐dipyridylaminide ligands

Two noble metal complexes involving ancillary chloride ligands and chelating 2,2′‐bipyridylamine (Hdpa) or its deprotonated derivative (dpa), namely [bis(pyridin‐2‐yl‐κN)amine]tetrachloridoplatinum(IV), [PtCl₄(C₁₀H₉N₃)], and [bis(pyridin‐2‐yl‐κN)aminido]dichloridogold(III), [AuCl₂(C₁₀H₈N₃)], are presented and structurally characterized. The metal atom in the former has a slightly distorted octahedral coordination environment, formed by four chloride ligands and two pyridyl N atoms of Hdpa, while the metal atom in the latter has a slightly distorted square‐planar coordination environment, formed by two chloride ligands and two pyridyl N atoms of dpa. The difference in conjugation between the pyridine rings in normal and deprotonated 2,2′‐dipyridylamine is discussed on the basis of the structural features of these complexes. The influence of weak interactions on the supramolecular structures of the complexes, providing one‐dimensional chains of [PtCl₄(C₁₀H₉N₃)] and dimers of [AuCl₂(C₁₀H₈N₃)], are discussed.     

Dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylate and bis(dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylato‐κ2N,N′)copper(I) tetrafluoroborate

The single‐crystal X‐ray structures of dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylate, C₁₄H₁₂N₂O₄, and the copper(I) coordination complex bis(dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylato‐κ²N,N′)copper(I) tetrafluoroborate, [Cu(C₁₄H₁₂N₂O₄)₂]BF₄, are reported. The uncoordinated ligand crystallizes across an inversion centre and adopts the anticipated anti pyridyl arrangement with coplanar pyridyl rings. In contrast, upon coordination of copper(I), the ligand adopts an arrangement of pyridyl donors facilitating chelating metal coordination and an increased inter‐pyridyl twisting within each ligand. The distortion of each ligand contrasts with comparable copper(I) complexes of unfunctionalized 2,2′‐bipyridine.