5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成

以5-雄烯二醇为原料,用微生物转化的方法合成了两个重要的神经甾体5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇。所用菌种总枝毛霉为我们自己筛选,并首次应用于5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成中。     

catena‐Poly[[(tetrahydrofuran‐κO)potassium]‐μ‐(η5:η5)‐2,3,4,5‐tetramethyl‐1‐n‐pentylcyclopentadienyl]

The title compound, [K(C₁₄H₂₃)(C₄H₈O)]_n, comprises zigzag chains of alternating bridging 2,3,4,5‐tetramethyl‐1‐n‐pentylcyclopentadienyl ligands and potassium ions, with an ancillary tetrahydrofuran ligand in the coordination environment of potassium. The coordination polymer strands so formed extend by 2₁ screw symmetry in the b‐axis direction. The chemically modified cyclopentadienyl ligand, with a tethered n‐pentyl group, was synthesized from 2,3,4,5‐tetramethylcyclopent‐2‐enone by a Grignard reaction.     

An Inverted‐Sandwich Diuranium μ‐η5:η5‐Cyclo‐P5 Complex Supported by U‐P5 δ‐Bonding

Reaction of [U(Tren^TIPS)] [ 1 , Tren^TIPS=N(CH₂CH₂NSiiPr₃)₃] with 0.25 equivalents of P₄ reproducibly affords the unprecedented actinide inverted sandwich cyclo‐P₅ complex [{U(Tren^TIPS)}₂(μ‐η⁵:η⁵‐cyclo‐P₅)] ( 2 ). All prior examples of cyclo‐P₅ are stabilized by d‐block metals, so 2 shows that cyclo‐P₅ does not require d‐block ions to be prepared. Although cyclo‐P₅ is isolobal to cyclopentadienyl, which usually bonds to metals via σ‐ and π‐interactions with minimal δ‐bonding, theoretical calculations suggest the principal bonding in the U(P₅)U unit is polarized δ‐bonding. Surprisingly, the characterization data are overall consistent with charge transfer from uranium to the cyclo‐P₅ unit to give a cyclo‐P₅ charge state that approximates to a dianionic formulation. This is ascribed to the larger size and superior acceptor character of cyclo‐P₅ compared to cyclopentadienyl, the strongly reducing nature of uranium(III), and the availability of uranium δ‐symmetry 5f orbitals.     

6β‐Azido‐7α‐hydroxy‐17‐oxo‐5α‐androstan‐3β‐yl acetate

In the title compound, C₂₁H₃₁N₃O₄, a potential inhibitor of aromatase, all rings are fused trans. Rings A, B and C have chair conformations which are slightly flattened. Ring D has a 14α‐envelope conformation. The steroid nucleus has a small twist, as shown by the C19—C10⋯C13—C18 torsion angle of 6.6 (2)°. Ab initio calculations of the equilibrium geometry of the mol­ecule reproduce this small twist, which appears to be due to the steric effect of the 6β‐azide substituent rather than to packing effects.     

η5‐(3)‐1‐Methyl‐1,2‐dicarbollyl‐η5‐2′,5′‐dimethylpyrrolylcobalt(III)

In the title compound, (η⁵‐2,5‐di­methyl­pyrrolyl)[(7,8,9,10,11‐η)‐7‐methyl‐7,8‐dicarba‐nido‐undecaborato]­cobalt(III), [3‐Co{η⁵‐[2,5‐(CH₃)₂‐NC₄H₂]}‐1‐CH₃‐1,2‐C₂B₉H₁₀] or [Co(C₃H₁₃B₉)(C₆H₈N)], the Co^III atom is sandwiched between the pentagonal faces of the pyrrolyl and dicarbollide ligands, resulting in a neutral mol­ecule. The C—C distance in the dicarbollide cage is 1.649 (3) Å.     

3β,7α,12α‐Tri­formyl­oxy‐24‐nor‐5β‐chol‐22‐ene

The title compound, alternatively called 24‐nor‐5β‐chol‐22‐ene‐3β,7α,12α‐triyl triformate, C₂₆H₃₈O₆, has a cis junction between two of the six‐membered rings. All three of the six‐membered rings have chair conformations that are slightly flattened and the five‐membered ring has a 13β,14α‐half‐chair conformation. The 3β, 7α and 12α ring substituents are axial and the 17β group is equatorial. The 3β‐formyl­oxy group is involved in one weak intermol­ecular C—H⋯O bond, which links the mol­ecules into dimers in a head‐to‐head fashion.     

Synthesis and Crystal Structure of [1‐(η5‐9‐Fluorenyl)‐2‐(η5‐1‐indenyl)ethane]hafnium Dimethyl

The synthesis and characterization of the unsymmetric hafnium dialkyl [1‐(η⁵‐9‐fluorenyl)‐2‐(η⁵‐1‐indenyl)ethane]HfCl₂ ( 2 ) and corresponding dimethyl complex [1‐(η⁵‐9‐fluorenyl)‐2‐(η⁵‐1‐indenyl)ethane]Hf(CH₃)₂ ( 3 ) is described. The dialkyl hafnocene ( 3 ) crystallizes in monoclinic space group P2₁/c (No. 14) with a = 9.458(8), b = 8.541(8), c = 23.733(11) Å, β = 93.16(5) deg., V = 1914(3) ų, Z = 4. Further on, complex 3 was activated with methylaluminiumoxane (MAO) and utilized as a catalyst in ethene polymerization.     

17‐Oxo‐5α‐androstane‐3α,4β‐diyl diacetate and 17‐oxo‐5β‐androstane‐3α,4β‐diyl diacetate

The title compounds, both C₂₃H₃₄O₅, are the 5α and 5β configurations of two diacetate epimers. The 5β‐diacetate crystallizes in an hexagonal structure, unusual for steroid molecules. The unit cell has an accessible solvent volume of 358 ų, responsible for clathrate behaviour. The 5β‐epimer also features some shorter than average bond lengths in the 3α,4β‐acetoxy groups. The conformations of the molecules of both epimers are compared with those obtained through abinitio quantum chemistry calculations. Cohesion of the crystals can be attributed to van der Waals and weak molecular C—H⋯O interactions.     

The α‐ and β‐epoxides of 3β‐acet­oxy‐5α‐lanost‐9(11)‐en‐7‐one

The structures of 3β‐acet­oxy‐9α,11α‐ep­oxy‐5α‐lanost‐9(11)‐en‐7‐one and 3β‐acet­oxy‐9β,11β‐ep­oxy‐5α‐lanost‐9(11)‐en‐7‐one, C₃₂H₅₂O₄, differ in their respective substituted cyclo­hexa­none rings but adopt similar conformations in the other three rings. In both of the crystal structures, weak inter­molecular C—H⋯O inter­actions are present.     

21α‐Fluoro‐7‐norvouacapane‐17β,21α‐lactone

The crystal structure of 21α‐fluoro‐7‐norvouacapane‐17β,21α‐lactone, C₂₀H₂₅FO₃, a new synthetic derivative of the diterpenoid 6α,7β‐di­hydroxy­vouacapan‐17β‐oic acid isolated from Pterodon polygalaeflorus Benth fruits, is described.     

αvβ3‐ or α5β1‐Integrin‐Selective Peptidomimetics for Surface Coating

Engineering biomaterials with integrin‐binding activity is a very powerful approach to promote cell adhesion, modulate cell behavior, and induce specific biological responses at the surface level. The aim of this Review is to illustrate the evolution of surface‐coating molecules in this field: from peptides and proteins with relatively low integrin‐binding activity and receptor selectivity to highly active and selective peptidomimetic ligands. In particular, we will bring into focus the difficult challenge of achieving selectivity between the two closely related integrin subtypes αvβ3 and α5β1. The functionalization of surfaces with such peptidomimetics opens the way for a new generation of highly specific cell‐instructive surfaces to dissect the biological role of integrin subtypes and for application in tissue engineering and regenerative medicine.     

[(8a,9,9a‐η)‐9‐(η5‐Cyclopentadienyl)‐9‐nickelafluorenyl](η5‐pentamethylcyclopentadienyl)nickel(II)

The title compound, [Ni₂(C₅H₅)(C₁₀H₁₅)(C₁₂H₈)] or [Ni(C₁₀H₁₅){Ni(C₅H₅)(C₁₂H₈)}], is a rare example (and the first obtained from nickelafluorenyllithium) of an analogue of nickelocene in which the central Ni atom is coordinated to one pentamethylcyclopentadienyl ring and one nickelafluorenyl ring. Both rings lie almost parallel to one another: the dihedral angle between the planes which include these rings is 4.4 (1)°. Slip parameter analysis indicates that the bonding mode of the central Ni atom to the nickelacyclic ring is between η³ and η⁵. Two‐dimensional layers of molecules are formed by C—H...π interactions.     

Oxidative Fragmentations of the 5α‐ and 5β‐Hydroxy‐B‐norcholestan‐ 3β‐yl Acetates

Oxidations of 5α‐hydroxy‐B‐norcholestan‐3β‐yl acetate ( 8 ) with Pb(OAc)₄ under thermal or photolytic conditions or in the presence of iodine afforded only complex mixtures of compounds. However, the HgO/I₂ version of the hypoiodite reaction gave as the primary products the stereoisomeric (Z)‐ and (E)‐1(10)‐unsaturated 5,10‐seco B‐nor‐derivatives 10 and 11 , and the stereoisomeric (5R,10R)‐ and (5S,10S)‐acetals 14 and 15 (Scheme 4). Further reaction of these compounds under conditions of their formation afforded, in addition, the A‐nor 1,5‐cyclization products 13 and 16 (from 10 ) and 12 (from 11 ) (see also Scheme 6) and the 6‐iodo‐5,6‐secolactones 17 and 19 (from 14 and 15 , resp.) and 4‐iodo‐4,5‐secolactone 18 (from 15 ) (see also Scheme 7). Oxidations of 5β‐hydroxy‐B‐norcholestan‐3β‐yl acetate ( 9 ) with both hypoiodite‐forming reagents (Pb(OAc)₄/I₂ and HgO/I₂) proceeded similarly to the HgO/I₂ reaction of the corresponding 5α‐hydroxy analogue 8 . Photolytic Pb(OAc)₄ oxidation of 9 afforded, in addition to the (Z)‐ and (E)‐5,10‐seco 1(10)‐unsaturated ketones 10 and 11 , their isomeric 5,10‐seco 10(19)‐unsaturated ketone 22 , the acetal 5‐acetate 21 , and 5β,19‐epoxy derivative 23 (Scheme 9). Exceptionally, in the thermal Pb(OAc)₄ oxidation of 9 , the 5,10‐seco ketones 10, 11 , and 22 were not formed, the only reaction being the stereoselective formation of the 5,10‐ethers with the β‐oriented epoxy bridge, i.e. the (10R)‐enol ether 20 and (5S,10R)‐acetal 5‐acetate 21 (Scheme 8). Possible mechanistic interpretations of the above transformations are discussed.     

[μ‐1κ2O,O′:2(η5)‐Cyclopentadienylcarboxylato][2(η5)‐diphenylphosphinocyclopentadienyl]bis[1,1(η5)‐tetramethylcyclopentadienyl]iron(II)titanium(III)

Reacting stoichiometric amounts of 1‐(diphenylphosphino)ferrocene­carboxylic acid and [Ti(η⁵‐C₅HMe₄)₂(η²‐Me₃SiC[triple‐bond]CSiMe₃)] produced the title carboxyl­atotitanocene complex, [{μ‐1κ²O,O′:2(η⁵)‐C₅H₄CO₂}{2(η⁵)‐C₅H₄P(C₆H₅)₂}{1(η⁵)‐C₅H(CH₃)₄}₂Fe^IITi^III] or [FeTi(C₉H₁₃)₂(C₆H₄O₂)(C₁₇H₁₄P)]. The angle subtended by the Ti/O/O′ plane, where O and O′ are the donor atoms of the κ²‐carboxy­late group, and the plane of the carboxyl‐substituted ferrocene cyclo­penta­dienyl is 24.93 (6)°.