基于室温离子液体的电导型气体传感器

本文利用室温离子液体对水或有机蒸气吸收后其离子导电性的改变,研制了以离子液体BmimPF6为敏感材料的电导型气体传感器.考查了BmimPF6用量对传感器响应的影响,测定了传感器对不同浓度的水蒸汽及乙醇、二氯甲烷等饱和有机蒸气的响应.实验结果显示,该传感器具有制作方便、结构简单、稳定性高及线性范围宽等优点,可被用于不同浓度的水或有机蒸气/氮气混合气氛中,水蒸汽或有机蒸气浓度的测定.此外,还针对该传感器对乙醇等不同饱和有机蒸气响应信号与这些有机溶剂的理化性质参数间的定量关系,采用化学计量学方法进行了建模分析.     

Surface-functionalized ionic liquid crystal-supported ionic liquid phase materials: ionic liquid crystals in mesopores

The influence of confinement on the ionic liquid crystal (ILC) [C(18)C(1)Im][OTf] is studied using differential scanning calorimetry (DSC), polarized optical microscopy (POM), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The ILC studied is supported on Si-based powders and glasses with pore sizes ranging from 11 to 50 nm. The temperature of the solid-to-liquid-crystalline phase transition seems mostly unaffected by the confinement, whereas the temperature of the liquid-crystalline-to-liquid phase transition is depressed for smaller pore sizes. A contact layer with a thickness in the order of 2 nm is identified. The contact layer exhibits a phase transition at a temperature 30 K lower than the solid-to-liquid-crystalline phase transition observed for the neat ILC. For applications within the "supported ionic liquid phase (SILP)" concept, the experiments show that in pores of diameter 50 nm a pore filling of α>0.4 is sufficient to reproduce the phase transitions of the neat ILC.     

An organocatalytic enantioselective synthesis of (+)-duryne

An efficient enantioselective synthesis of the potent anticancer agent (+)-duryne was achieved by the use of a one-pot organocatalyzed hydroxylation/Ohira–Bestmann and Grubbs cross-metathesis/selective cis-Wittig reaction. This new approach is envisioned to facilitate the synthesis of every representative member of the family.     

Influence of the ionic liquid/gas surface on ionic liquid chemistry

Applications such as gas storage, gas separation, NP synthesis and supported ionic liquid phase catalysis depend upon the interaction of different species with the ionic liquid/gas surface. Consequently, these applications cannot proceed to the full extent of their potential without a profound understanding of the surface structure and properties. As a whole, this perspective contains more questions than answers, which demonstrates the current state of the field. Throughout this perspective, crucial questions are posed and a roadmap is proposed to answer these questions. A critical analysis is made of the field of ionic liquid/gas surface structure and properties, and a number of design rules are mined. The effects of ionic additives on the ionic liquid/gas surface structure are presented. A possible driving force for surface formation is discussed that has, to the best of my knowledge, not been postulated in the literature to date. This driving force suggests that for systems composed solely of ions, the rules for surface formation of dilute electrolytes do not apply. The interaction of neutral additives with the ionic liquid/gas surface is discussed. Particular attention is focussed upon H(2)O and CO(2), vital additives for many applications of ionic liquids. Correlations between ionic liquid/gas surface structure and properties, ionic liquid surfaces plus additives, and ionic liquid applications are given.     

An electrochromic nanostructured liquid crystal consisting of pi-conjugated and ionic moieties

A new electrochromic molecule comprised of pi-conjugated and ionic moieties has been designed and synthesized. It forms a nanosegregated smectic phase in which ion-conductive layers of imidazolium salts are located between hole transport layers of phenylterthiophene moieties. Electrochromism is observed in the bulk liquid crystal state of this compound without an electrolyte solution. In this nanosegregated smectic phase, an electrical double layer is formed rapidly at the electrode. Consequently holes are injected from the electrode, resulting in oxidation of the pi-conjugated moieties.     

Supported ionic liquid catalysis

Supported ionic liquid catalysis is a concept which combines the advantages of ionic liquids with those of heterogeneous support materials. The viability of this concept has been confirmed by several studies which have successfully confined various ionic phases to the surface of support materials and explored their potential catalytic applications. Although the majority of the evaluated supports were silica based, several studies focused on polymeric materials including membranes. The preparation of these materials was achieved by using two different immobilization approaches. The first approach involves the covalent attachment of ionic liquids to the support surface whereas the second simply deposits the ionic liquid phases containing catalytically active species on the surface of the support. Herein recent advances made in this area are described.     

An ionic liquid mediated one-pot synthesis of substituted thiazolidinones and benzimidazoles

An expeditious one-pot synthesis of 2,3-diaryl/2-aryl-3-heteroaryl-1,3-thiazolidin-4-ones and 1-aryl-1H,3H-thiazolo[3,4-a]benzimidazoles have been accomplished by condensing hetero/aromatic amine, 2-mercaptoacetic acid, aromatic aldehyde and 1,2-phenylenediamine, 2-mercaptoacetic acid and aromatic aldehyde, respectively, in ionic liquids, viz, 1-butyl-3-methyl-imidazolium tetrafluoroborate and 1-methoxyethyl-3-methylimidazolium trifluoroacetate.     

An efficient conjugate hydrothiocyanation of chalcones with a task-specific ionic liquid

A new and efficient method of conjugate hydrothiocyanation of chalcones along with the preparation of a probe for demonstrating the utility of the resulting β-thiocyanato ketones in heterocyclic synthesis is reported. Chalcones undergo an efficient conjugate hydrothiocyanation with the task-specific ionic liquid (TSIL), 1-n-butyl-3-methylimidazolium thiocyanate ([bmim]SCN) followed by reaction with AcONH₄ or an amine to afford chemically and pharmaceutically interesting 2-amino-1,3-thiazines at room temperature in a one-pot procedure. After isolation of the product, the ionic liquid [bmim]OH could be used for the synthesis of [bmim]SCN, thus allowing recycling of the TSIL for further use.     

An organocatalytic approach to the core of eunicellin

A stereocontrolled synthesis of the core of eunicellin is described featuring a Claisen rearrangement and a diastereoselective organocatalytic Diels-Alder reaction as the key steps.     

An efficient organocatalytic route to the atorvastatin side-chain

An organocatalytic route to the synthesis of the atorvastatin side-chain, a building block present in the statin family, is described using l-proline-catalyzed α-aminooxylation of an aldehyde. The method also employs an iodine-induced intramolecular electrophilic cyclization of a carbonate to produce the iodocarbonate in a highly diastereoselective manner.     

An asymmetric organocatalytic povarov reaction with 2-hydroxystyrenes

An organocatalytic asymmetric three-component Povarov reaction involving 2-hydroxystyrenes has been established to provide an efficient method to access structurally diverse cis-disubstituted tetrahydroquinolines in high stereoselectivities of up to >99:1 dr and 97% ee. This protocol also provides an easy access to tetrahydroquinolines with chiral quaternary stereocenters upon using α-alkyl 2-hydroxystyrenes as substrates. The theoretical studies revealed that the Povarov reaction proceeded through a sequential vinylogous Mannich reaction and an intramolecular Friedel-Crafts reaction, wherein the phosphoric acid acted as bifunctional catalyst to activate 2-hydroxystyrene and aldimine simultaneously.     

An efficient ionic liquid supported divergent assembly of 3,6-branched glucosamine-containing pentasaccharide

We utilized the glycosyl acceptor tagging method with ionic liquid support for synthesis of the core segment of Clostridium botulinum C2 toxin ligand through a divergent synthetic strategy without chromatographic purification.The total yield was 57.1% and the reaction was completed in 10 h.The efficient ionic liquid supported glycosylation and purification procedure was applied for the synthesis of branched glucosamine-containing oligosaccharides for the first time,which expanded the scope of ionic liquid supported synthesis of biologically important oligosaccharides.     

An efficient green synthesis of xanthenedione derivatives promoted by acidic ionic liquid

Xanthenedione derivatives were prepared through the condensation reaction of aromatic aldehydes with 5,5‐dimethyl‐1,3‐cyclohexanedione promoted by acidic ionic liquid. The reaction time was 20–40 min with the yields between 82.3% and 95.3%. It was shown that the proposed method was fast, high efficient, and environmentally benign. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:609–611, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20486     

Surface tension of ionic liquids and ionic liquid solutions

Some of the most active scientific research fronts of the past decade are centered on ionic liquids. These fluids present characteristic surface behavior and distinctive trends of their surface tension versus temperature. One way to explore and understand their unique nature is to study their surface properties. This critical review analyses most of the surface tension data reported between 2001 and 2010 (187 references).     

Ionic liquid/ionic liquid dispersive liquid-liquid microextraction

In this article, a novel and simple microextraction method, termed ionic liquid/ionic liquid dispersive liquid–liquid microextraction (IL/IL‐DLLME), has been designed and developed for the rapid enrichment and analysis of environmental pollutants. Instead of using hazardous organic solvents, two kinds of ILs, hydrophobic IL and hydrophilic IL, were used as extraction solvent and disperser solvent in IL/IL‐DLLME step, respectively. Permethrin and biphenthrin, two of the often‐used pyrethroid pesticides, were used as model compounds. Factors that may affect the enrichment efficiencies were investigated and optimized in detail. Under optimum conditions, permethrin and biphenthrin exhibited a wide linear relationship over the range 1–100 μg/L. For permethrin and biphenthrin, the precisions were 4.65–7.78%, and limits of detection were found to be 0.28 and 0.83 μg/L, respectively. Satisfactory results were achieved when the present method was applied to analyze the target compounds in real‐world water samples with spiked recoveries over the range 84.1–113.5%. All these facts indicated that IL/IL‐DLLME is a simple and rapid alternative for the enrichment and analysis of environmental pollutants and will have a wide application perspective in the future.