High-throughput genotyping of repeat polymorphism in the regulatory region of serotonin transporter gene by gel microchip electrophoresis.

Large-scale genotyping of the repeat polymorphism in the regulatory region of the serotonin transporter gene (5-HTTLPR) was attempted by polymerase chain reaction (PCR) amplification followed by gel microchip electrophoresis analysis. The multilane (96) format of the gel microchip system allowed parallel separation of a large number of samples. The separation and visualization of the PCR amplicons from either the 5-HTTLPR short allele (number of repeats are 14) or the 5-HTTLPR long form (16 repeats) was completed in a few minutes. Genotyping of healthy Caucasian individuals showed that the short allele had a somewhat lower frequency (0.42) than the long form (0.58), and the genotype frequencies fulfilled the criteria of the Hardy-Weinberg equilibrium (chi = 0.012, p = 0.994). Based on these results, gel microchip electrophoresis system proved to be a powerful tool for high throughput genotyping of repeat polymorphism.     

Genotyping of simple sequence repeats--factors implicated in shadow band generation revisited

PCR amplification of microsatellite sequences generates, besides the main product corresponding to allele size, also additional, undesired products usually shorter by multiples of the repeated unit. These extra products known as shadow bands or stutter products may complicate genotyping. The mechanism by which these artifacts are formed is not well understood and so no effective remedy has been found to cope with these spurious products. In this study, using the DNA templates containing the CAG/CTG repeats flanked by gene-specific sequences and universal priming sites, we analyzed the effects of many PCR variables on the shadow band generation. The most important result was that at the decreased temperature of the denaturation step during PCR cycling the shadow bands were either not formed or were strongly suppressed. Several possible sources of this effect are discussed.     

Rapid and sensitive genotyping of dopamine D4 receptor tandem repeats by automated ultrathin-layer gel electrophoresis

Prior studies have revealed possible association between the presence of a seven repeat of the 48 bp variable number tandem repeat polymorphism of the human dopamine D4 receptor gene (DRD4) and some normal and pathological human traits, such as novelty seeking, hyperactivity disorders, and substance abuse. Some reports supported this finding whereas others did not. Incorrect genotyping could be one of the reasons for these controversial results, and might originate from preferential amplification of shorter polymerase chain reaction (PCR) products, resulting in the so-called allele dropout. In this paper we optimized the conditions for simultaneous amplification of shorter and longer amplicons of the 48 bp repeat region of the DRD4 gene in order to avoid the loss of the longer allele and consequent incorrect genotyping, using very low DNA template concentrations and partial replacement of 2'-deoxyguanosine-5'-triphosphate (dGTP) by 2'-deoxyinosine-5'-triphosphate (dITP). The optimized PCR method in combination with high throughput automated ultrathin-layer gel electrophoresis was suitable for rapid genotyping from less than a nanogram DNA using noninvasive sampling (buccal epithelial cells). All detected genotypes are presented, including such rear heterozygotes as the 2 x and 8 x 48 bp repeats in the same sample, showing the reliability of our novel detection method of longer alleles in the presence of shorter alleles.     

Characterization of a highly variable short tandem repeat polymorphism at the D2S1242 locus

We report the evaluation of short tandem repeat (STR) locus D2S1242 (GDB ID G00-309-429) for forensic purposes, investigated by polymerase chain reaction (PCR) amplification and both native and denaturating polyacrylamide gel electrophoresis in 147 unrelated Austrians. No deviations from Hardy-Weinberg expectations were observed. The mean exclusion chance (MEC) was 0.669, the discriminating power (DP) was 0.947, and the observed heterozygosity rate was 0.856. An allelic ladder consisting of eight sequenced alleles (141-167 and 175 bp) was constructed. Sequence analysis revealed that the locus comprised two repeat motifs varying in number between alleles GAAA and GAAG. According to the number of tetranucleotide repeats the smallest allele was designated as 10 and the largest allele as 18.     

Rapid sizing of microsatellite alleles by gel electrophoresis on microfabricated channels: application to the D19S394 tetranucleotide repeat for cosegregation study of familial hypercholesterolemia.

This study evaluated the applicability of microchip electrophoresis to the sizing of microsatellites suitable to genetic, clinical and forensic applications. The evaluation was performed with the D19S394 tetranucleotide (AAAG) repeat characterized by a wide variation in the repeat number (1-17) and a short recombination distance from the low-density lipoprotein (LDL)-receptor gene that makes it suitable to cosegregation analysis of familial hypercholesterolemia (FH). The study was performed with 70 carriers of two LDL-receptor mutations common in northern Italy (i.e., the 4 bp insertion in exon 10 known as FH-Savona and the D200G missense mutation in the exon 4, known as FH-Padova 1) and 100 healthy controls. The polymerase chain reaction (PCR) amplification products prepared with a cosolvent PCR protocol and an antibody-protected polymerase were directly analyzed with an apparatus for high-voltage capillary electrophoresis on microchips and laser-induced fluorescence detection equipped with chips for the analysis of 25-500 bp dsDNA fragments. The test could not be extended to dinucleotide repeats due to the resolution characteristics of the available microchip. This novel approach was able to distinguish 17 microsatellite alleles varying from 0 to 17 repeats. Many of these alleles were quite rare, but the seven more abundant accounted for over the 70% of allele distribution in control population. The standard deviation in the sizing of the most abundant alleles ranged from +0.60 to +/- 0.75 bp. This indicated that the size attribution to a conventional allele using the +/- 1 bp range around it allowed a confidence limit above the 80 %. The sizing of D19S394 obtained this way allowed the cosegregation analysis with both the FH mutations tested. Therefore, this innovative approach to microsatellite sizing was much simpler, but equally effective as traditional capillary electrophoresis, at least with tetranucleotide repeats.     

Analysis and interpretation of mixture DNA using AS‐PCR of mtDNA

Semi‐nested PCR with allele‐specific (AS) primers and sequencing of mitochondrial DNA (mtDNA) were performed to analyze and interpret DNA mixtures, especially when biological materials were degraded or contained a limited amount of DNA. SNP‐STR markers were available to identify the minor DNA component using AS‐PCR; moreover, SNPs in mtDNA could be used when the degraded or limited amounts of DNA mixtures were not successful with SNP‐STR markers. Five pairs of allele‐specific primers were designed based on three SNPs (G15043A, T16362C, and T16519C). The sequence of mtDNA control region of minor components was obtained using AS‐PCR and sequencing. Sequences of the amplification fragments were aligned and compared with the sequences of known suspects or databases. When this assay was used with the T16362C and T16519C SNPs, we found it to be highly sensitive for detecting small amounts of DNA (～30 pg) and analyzing DNA mixtures of two contributors, even at an approximately 1‰ ratio of minor and major components. An exception was tests based on the SNP G15043A, which required approximately 300 pg of a 1% DNA mixture. In simulated three contributor DNA mixtures (at rate of 1:1:1), control region fragments from each contributor were detected and interpreted. AS‐PCR combined with semi‐nested PCR was successfully used to identify the mtDNA control region of each contributor, providing biological evidence for excluding suspects in forensic cases, especially when biological materials were degraded or had a limited amount of DNA.     

ARMS TaqMan real-time PCR for genotyping factor V Leiden mutation in Han Chinese

Factor V Leiden (FV_Leiden) is a missense mutation of 1691 position (G1691A) in exon 10 of FV gene, and being a genetic risk for venous thrombosis. Currently, there are several PCR-based methods for detecting FV_Leiden mutation; however, these methods have disadvantages such as time-consuming, cumbersome steps and potentially hazardous gels. The aims of present study were to develop a simple, time-saving, accurate, and gel-free method, called amplification refractory mutation system (ARMS) TaqMan real-time PCR, for detecting FV_Leiden mutation. We severally designed two specific reverse primers for mutant and wild-type through intentional introduction of mismatched nucleotide at the penultimate 3′ position. Although target amplicon amplification efficiency is reduced, but another corresponding amplicon is almost completely inhibited. Then, specific TaqMan-probe was designed to detect target amplicon. Established method was used to detect 500 unselected samples in Han Chinese, the results showed 499 cases of wild-type and one heterozygote. Afterward, 50 randomly picked wild-type cases and one heterozygote were reexamined by bidirectional DNA sequencing, which is considered as “Gold standard method.” Exhilaratingly, the results detected by the two methods were completely consistent. At last, allelic frequency of FV_Leiden was calculated the in Han Chinese. Given the above results, A FV_Leiden heterozygote has been found in 500 random samples in Han Chinese, and the allelic frequency was 0.1%. In conclusion, the ARMS TaqMan real-time PCR is an ideal detecting system for genotyping FV_Leiden mutation in clinical application, and FV_Leiden mutation exists in Han Chinese despite extremely low prevalence.     

Programmable endonuclease combined with isothermal polymerase amplification to selectively enrich for rare mutant allele fractions

Liquid biopsy is a highly promising method for non-invasive detection of tumor-associated nucleic acid fragments in body fluids but is challenged by the low abundance of nucleic acids of clinical interest and their sequence homology with the vast background of nucleic acids from healthy cells. Recently, programmable endonucleases such as clustered regularly interspaced short palindromic repeats (CRISPR) associated protein (Cas) and prokaryotic Argonautes have been successfully used to remove background nucleic acids and enrich mutant allele fractions, enabling their detection with deep next generation sequencing (NGS). However, the enrichment level achievable with these assays is limited by futile binding events and off-target cleavage. To overcome these shortcomings, we conceived a new assay (Programmable Enzyme-Assisted Selective Exponential Amplification, PASEA) that combines the cleavage of wild type alleles with concurrent polymerase amplification. While PASEA increases the numbers of both wild type and mutant alleles, the numbers of mutant alleles increase at much greater rates, allowing PASEA to achieve an unprecedented level of selective enrichment of targeted alleles. By combining CRISPR-Cas9 based cleavage with recombinase polymerase amplification, we converted samples with 0.01% somatic mutant allele fractions (MAFs) to products with 70% MAFs in a single step within 20 min, enabling inexpensive, rapid genotyping with such as Sanger sequencers. Furthermore, PASEA's extraordinary efficiency facilitates sensitive real-time detection of somatic mutant alleles at the point of care with custom designed Exo-RPA probes. Real-time PASEA’ performance was proved equivalent to clinical amplification refractory mutation system (ARMS)-PCR and NGS when testing over hundred cancer patients’ samples. This strategy has the potential to reduce the cost and time of cancer screening and genotyping, and to enable targeted therapies in resource-limited settings.     

A multiplex SNP genotyping by allele‐specificspecific PCR based on stem‐loop and universal fluorescent primers of Chr1daxin mice

Single nucleotide polymorphisms (SNPs) are one of the most common markers in mammals. Rapid, accurate, and multiplex typing of SNPs is critical for subsequent biological and genetic research. In this study, we have developed a novel method for multiplex genotyping SNPs in mice. The method involves allele‐specific PCR amplification of genomic DNA with two stem‐loop primers accompanied by two different universal fluorescent primers. Blue and green fluorescent signals were conveniently detected on a DNA sequencer. We verified four SNPs of 65 mice based on the novel method, and it is well suited for multiplex genotyping as it requires only one reaction per sample in a single tube with multiplex PCR. The use of universal fluorescent primers greatly reduces the cost of designing different fluorescent probes for each SNP. Therefore, this method can be applied to many biological and genetic studies, such as multiple candidate gene testing, genome‐wide association study, pharmacogenetics, and medical diagnostics.     

Multiple use of slab gels in sequencing apparatus for separation of polymerase chain reaction products

Attempting to assess whether a decrease of the electrophoresis temperature could prevent or reduce the extent of gel well deformations, and whether the utilization of native polyacrylamide gels (without urea) could speed up the separation of polymerase chain reaction (PCR)-amplified products with an automated 377 DNA sequencer, denatured PCR products were subjected to electrophoresis in 6% native gels under 45 degrees C. Results show that a decrease of the electrophoresis temperature from 51 degrees C (recommended by the User's Manual) to 45 degrees C substantially facilitates the preservation of gel wells, and that all PCR products tested migrate significantly faster in native than in denatured (with urea) gels of the same concentration. The combination of a 6% native gel and a lower (45 degrees C) electrophoresis temperature permits multiple uses of a given gel with consistent results, consequently reducing the electrophoresis time and reagent costs.     

Detection of telomerase activity in high concentration of cell lysates using primer-modified gold nanoparticles

Although the telomeric repeat amplification protocol (TRAP) has served as a powerful assay for detecting telomerase activity, its use has been significantly limited when performed directly in complex, interferant-laced samples. In this work, we report a modification of the TRAP assay that allows the detection of high-fidelity amplification of telomerase products directly from concentrated cell lysates. Briefly, we covalently attached 12 nm gold nanoparticles (AuNPs) to the telomere strand (TS) primer, which is used as a substrate for telomerase elongation. These TS-modified AuNPs significantly reduce polymerase chain reaction (PCR) artifacts (such as primer dimers) and improve the yield of amplified telomerase products relative to the traditional TRAP assay when amplification is performed in concentrated cell lysates. Specifically, because the TS-modified AuNPs eliminate most of the primer-dimer artifacts normally visible at the same position as the shortest amplified telomerase PCR product apparent on agarose gels, the AuNP-modified TRAP assay exhibits excellent sensitivity. Consequently, we observed a 10-fold increase in sensitivity for cancer cells diluted 1000-fold with somatic cells. It thus appears that the use of AuNP-modified primers significantly improves the sensitivity and specificity of the traditional TRAP assay and may be an effective method by which PCR can be performed directly in concentrated cell lysates.     

Influence of fluorophor dye labels on the migration behavior of polymerase chain reaction--amplified short tandem repeats during denaturing capillary electrophoresis.

The determination of the length of polymerase chain reaction (PCR)-amplified short tandem repeats (STRs) by denaturing capillary electrophoresis (CE) is a standard procedure for purposes of genotyping. We show that dye-specific mobility anomalies exist for 5'-fluorophor-labelled single-stranded DNA (ssDNA) fragments in CE using the performance-optimized polymer 4 (POP4) buffer sieving matrix, containing the entangled poly(N,N-dimethylacrylamide) polymer, urea, and 2-pyrrolidinone. The dye-specific retardation effects relative to coseparated GeneScan-500 [TAMRA] standard fragments can lead to wrong genotyping, even for allele-specific fragments of pentanucleotide STRs, when comparing the relative calculated sizes of identical fragments, labelled with rhodamine (ROX, TAMRA) or fluorescein dyes (FAM, 6-FAM, HEX, JOE, NED, TET): The size of fluorescein dye-labelled fragments of appr. 100 b in length appears to be smaller by up to 6.5 b. This effect becomes more dramatic with decreasing size: a 6-FAM-labelled 24-mer oligonucleotide appeared to be smaller by 11 b. In contrast, in classical urea/polyacrylamide slab-gel electrophoresis only a small dye-specific retardation of identical fragments is observed. The dye-specific effects are superimposed by weaker size and sequence-dependent anomalies of fragment mobility. Therefore, in denaturing CE the coseparation of a defined allele ladder labelled with the same dye as the unknown sample fragments remains the method of choice for accurate genotyping.     

Simultaneous analysis of multiple PCR amplicons enhances capillary SSCP discrimination of MHC alleles

Major histocompatibility complex (MHC) genotyping still remains one of the most challenging issues for evolutionary ecologists. To date, none of the proposed methods have proven to be perfect, and all provide both important pros and cons. Although denaturing capillary electrophoresis has become a popular alternative, allele identification commonly relies upon conformational polymorphisms of two single‐stranded DNA molecules at the most. Using the MHC class II (β chain, exon 2) of the black kite (Aves: Accipitridae) as our model system, we show that the simultaneous analysis of overlapping PCR amplicons from the same target region substantially enhances allele discrimination. To cover this aim, we designed a multiplex PCR capable to generate four differentially sized and labeled amplicons from the same allele. Informative peaks to assist allele calling then fourfold those generated by the analysis of single PCR amplicons. Our approach proved successful to differentiate all the alleles (N=13) isolated from eight unrelated birds at a single optimal run temperature and electrophoretic conditions. In particular, we emphasize that this approach may constitute a straightforward and cost‐effective alternative for the genotyping of single or duplicated MHC genes displaying low to moderate sets of divergent alleles.     

Multiplex agarose gel electrophoresis system for variable number of tandem repeats genotyping: Analysis example using Mycobacterium tuberculosis

As one genotyping method for Mycobacterium tuberculosis, variable number of tandem repeats (VNTR) is a promising tool to trace the undefined transmission of tuberculosis, but it often requires large equipment such as a genetic analyzer for DNA fragment analysis or CE system to conduct systematic analyses. For convenient genotyping at low cost in laboratories, we designed a multiplex PCR system that is applicable to agarose gel electrophoresis using fluorescent PCR primers. For tuberculosis genotyping by VNTR, the copy quantities of minisatellite DNA must be determined in more than 12 loci. The system can halve laborious electrophoresis processes by presenting an image of two VNTR amplicons on a single lane. No expensive equipment is necessary for this method. Therefore, it is useful even in developing countries.     

Detection of Saccharomyces cerevisiae carboxylesterase activity after native and sodium dodecyl sulfate electrophoresis by using fluorescein diacetate as substrate

A simple method for the visualisation of wine yeast esterase (carboxylesterase EC 3.1.1.1) activity on electrophoretic gels was developed, using the fluorescent substrate fluorescein diacetate. The zymogram system allows a sensitive detection of esterase bands in only 5 min of incubation of both native and sodium dodecyl sulfate gels.     

Fully reversible procedure for silver staining improves densitometry of complex mixtures of biopolymers resolved by sodium dodecyl sulfate-polyacrylamide gel electrophoresis

Due to its high sensitivity, silver staining is a widely popular method for the revelation of biopolymers separated by both native and denaturing electrophoresis. A step-by-step method for the destaining and restaining of overdeveloped/overloaded silver-stained bands is described that is applicable to both proteins and nucleic acids. The procedure significantly improves densitometric analysis of gels that have been silver stained with either commercial kits or solutions made in-house. The method permits reproducible densitometry of silver-stained gels and allows quantification of both main and minor components in complex mixture of molecules resolved on the same gel slab. All steps may be interrupted and are readily reversible, allowing for facile densitometric analyses and photographic recording under optimized conditions. Furthermore, common artifacts such as differential staining of the two gel surfaces, localized uneven yellow-ochre background, and the presence of fold marks and fingerprints can be easily removed.     

Use of a bilayer stacking gel to improve resolution of lipopolysaccharides and lipooligosaccharides in polyacrylamide gels

Lipopolysaccharide (LPS) and lipooligosaccharide (LOS) are important antigenic and integral components of the outer membrane of Gram-negative bacteria. Alteration or heterogeneity of LPS/LOS structure is most often assessed by alteration of electrophoretic band profiles using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). In order to discern minor differences in the electrophoretic profile of closely spaced bands, particularly the low molecular weight bands of LOS, optimum resolution is required. Unfortunately, many publications of LPS/LOS in polyacrylamide gels show a diffuse, smeared pattern without discernible bands. We report here a formulation for polyacrylamide gels that reproducibly yields LPS/LOS bands with sharp resolution. A key feature of this formulation is the use of a separate comb gel containing electrode buffer layered on top of the conventional stacking gel.     

A comparison of the effects of PCR inhibition in quantitative PCR and forensic STR analysis

In this paper we compare the effects of three representative PCR inhibitors using quantitative PCR (qPCR) and multiplex STR amplification in order to determine the effect of inhibitor concentration on allele dropout and to develop better ways to interpret forensic DNA data. We have used humic acid, collagen and calcium phosphate at different concentrations to evaluate the profiles of alleles inhibited in these amplifications. These data were correlated with previously obtained results from quantitative PCR including melt curve effects, efficiency changes and cycle threshold (Ct) values. Overall, the data show that there are two competing processes that result from PCR inhibition. The first process is a general loss of larger alleles. This appears to occur with all inhibitors. The second process is more sequence specific and occurs when the inhibitor binds DNA, altering the cycle threshold and the melt curve. This sequence-specific inhibition results in patterns of allele loss that occur in addition to the overall loss of larger alleles. The data demonstrate the applicability of utilizing real-time PCR results to predict the presence of certain types of PCR inhibition in STR analysis.     

Genotyping short tandem repeats using flow injection and electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

Characterizing polymerase chain reaction (PCR) amplicons has been accomplished for the first time using flow injection analysis coupled to electrospray ionization mass spectrometry (ESI-MS). The PCR amplicons were amplified at the human tyrosine hydroxylase short tandem repeat locus from an individual homozygotic for the 9.3 allele. One product was amplified using Pfu polymerase and yielded a blunt-ended amplicon of 82 base-pairs (bp) in length. The second PCR product was amplified using Taq polymerase that resulted in an amplicon with cohesive termini of 82 bp plus either mono- or diadenylation. The two PCR amplicons were alternatively injected using a 0.5-microL loop at 2 microM for the Pfu amplicon and 1 microM for the Taq amplicon with a flow rate of 200 nL/min during data acquisition. Both PCR amplicons were accurately identified using mass measurements illustrating the compatibility of ESI-MS for genotyping short tandem repeat sequences and the potential for high-throughput genotyping of large PCR amplicons.     

Lateral flow dipstick test for genotyping of 15 beta-globin gene (HBB) mutations with naked-eye detection

For definitive diagnosis of thalassemia carriers and patients, as well as for prenatal diagnosis, genotype analysis is of fundamental importance. We report a dry-reagent, lateral flow dipstick test that enables visual genotyping (detection by naked eye) of 15 mutations common in Mediterranean populations in the beta-globin gene (HBB). The method comprises 3 simple steps: (i) PCR amplification of a single 1896 bp segment of the beta globin gene flanking all 15 mutations; (ii) a multiplex (10-plex and/or 30-plex) primer extension reaction of the unpurified amplification product using allele-specific primers. Biotin is incorporated in the extended product; (iii) a dry-reagent multi-allele (10-plex) dipstick assay for visual detection of the primer extension reaction products within minutes. The total time required for PCR, primer extension reaction and the dipstick assay is ∼2 h. The method was evaluated by genotyping 45 DNA samples of known genotypes and 54 blind samples. The results were fully concordant with reference methods. The method is simple, rapid, and cost-effective. Detection by the dipstick assay does not require specialized instrumentation or highly qualified personnel. The proposed method could be a particularly useful tool in laboratories with limited resources and a basis for point-of-care diagnostics especially in combination with PCR amplification from whole blood.