Enantiomeric separation of acidic compounds using single-isomer amino cyclodextrin derivatives in nonaqueous capillary electrophoresis

The enantiomeric separation of a series of acidic pharmaceuticals (mostly nonsteroidal anti-inflammatory drugs) has been investigated in NACE systems using single-isomer amino beta-CD derivatives. The first part of this study consisted of the selection of the basic experimental conditions to separate efficiently the enantiomers of acidic drugs. Several parameters, such as the nature of the ionic BGE components, were studied and a methanolic solution of ammonium acetate containing the cationic CD was selected as BGE. A D-optimal design with 20 experimental points was then applied and the nature and concentration of the CD were found to have a significant effect on the enantiomeric resolution for all studied compounds. Resolution (R(s)) values were always higher with 6-monodeoxy-6-mono(3-hydroxy)propylamino-beta-CD (PA-beta-CD) compared to those obtained with 6-monodeoxy-6-mono(2-hydroxy)propylamino-beta-CD (IPA-beta-CD). However, the latter led to shorter migration times. Generic NACE conditions were then selected by means of the multivariate approach in order to obtain the highest R(s) values in a minimum amount of time. Finally, dependence of separation selectivity, resolution, as well as mobility difference on chiral selector concentration was discussed and binding constants with PA-beta-CD were estimated for the two enantiomers of one of the model compounds, suprofen in these NACE systems.     

Comparing cyclodextrin derivatives as chiral selectors for enantiomeric separation in capillary electrophoresis

A total of 26 different cyclodextrin (CD) derivatives with different functional groups and degrees of substitution were tested against 35 basic pharmaceutical compounds in an effort to investigate their effectiveness as chiral selectors for enantiomeric separation in capillary electrophoresis (CE). Testing was performed under the same conditions using a low pH buffer (25 mM phosphate buffer at pH approximately 2.5). Five CD derivatives, namely, highly sulfated-beta-CD, highly sulfated-beta-CD, hydroxypropyl-beta-CD (degree of substitution approximately 1), heptakis-(2,6-O-dimethyl)-beta-CD, and heptakis(2,3,6-O-trimethyl)-beta-CD were identified to be most effective for enantiomeric separations and have a wide range of enantiomeric selectivity towards the model compounds. Over 90% of the model compounds were enantiomerically resolved with the five identified CD derivatives, at a minimum resolution of 0.5. An additional 20 compounds were also tested to demonstrate the validity of the identified CD derivatives. The five CD derivatives were recommended as the starting chiral selectors in developing enantiomeric separation methods by CE.     

Rapid separation of basic drugs by nonaqueous capillary electrophoresis

Summary Nonaqueous capillary electrophoresis (NACE) has been used to achieve rapid separations of basic drugs. A high electric field was obtained by using short capillaries. Baseline separations of basic drugs, including amphetamines, tropane alkaloids and local anesthetics, were achieved in 1 min by selection of the appropriate organic solvent and electrolyte composition. Thus, high-throughput analyses can be performed. Peak efficiency up to 9154 theoretical plates s⁻¹ was achieved in a separation performed at 923V cm⁻¹. No discernible loss in resolution was observed when a conventional capillary (64.5cm) was replaced by a short (32.5 cm) capillary.     

Infinite enantiomeric resolution of basic compounds using highly sulfated cyclodextrin as chiral selector in capillary electrophoresis

Four chiral basic analytes, namely methadone, fluoxetine, venlafaxine, and tramadol, were selected as model compounds for investigating their stereoselective separation with highly sulfated gamma-cyclodextrin (HS gamma-CD) by capillary electrophoresis (CE)-UV and CE-mass spectrometry (MS). At high concentration of chiral selector, the preferentially bonded enantiomer migrated faster in the anodic mode to the detector and high resolutions were obtained for all analytes. In the cathodic mode, at lower highly sulphated cyclodextrin (HS-CD) concentration, basic compounds could be detected, with the weakly bonded enantiomer migrating first (enantiomeric migration order inversion). It was also then possible, at intermediate HS-CD concentration, that only one enantiomer migrated to the detector as cation while the other enantiomer complexed with the CD was negatively charged and presented an opposite mobility. The latter never reached the detector achieving a perfect enantiomeric selectivity. Infinite chiral resolutions were thus achieved by CE-UV as well as by CE-electrospray ionisation (ESI)-MS where concentrations of HS-CD were adapted according to the negative contribution of the nebulization gas pressure of the interface.     

Combinatorial enantiomeric separation of diverse compounds using capillary array electrophoresis

Combinatorial chiral separations were performed on a 96-capillary array electrophoresis system. A comprehensive enantioseparation protocol employing neutral and sulfated cyclodextrins as chiral selectors for common basic, neutral and acidic compounds was developed. By using only four judiciously chosen separation buffers, successful enantioseparations were achieved for 49 out of 54 test compounds spanning a large variety of pK and structures. Therefore, unknown compounds can be screened in this manner to identify the optimal enantioselective conditions in just one run.     

Ion-pair association and acid-base equilibria in nonaqueous capillary electrophoresis of weakly basic compounds

CE in nonaqueous media was used to study the migrating behavior of two weakly basic s-triazine pesticides and one of their metabolites. The target pesticides were selected to be representative for each of the two main groups: propazine and deethylatrazine for the chloro-s-triazines group and ametryn for the methylthio-s-triazines group. To elucidate the phenomena involved, systematic studies were carried out in the different organic media studied. Absolute mobilities were determined in 50% v/v methanol (MeOH)/ACN by extrapolation of the effective mobilities to zero ionic strength in the presence of different concentrations of perchloric acid. Conductivity measurements performed in MeOH and 50 and 20% v/v methanol/ACN permitted the evaluation of the associations of the components of the BGE. The effects of ionic strength on the actual mobilities of the compounds were determined in the presence of perchloric acid and SDS in different organic media. Two different ion-pair equilibria were considered: one due to the presence of perchlorate anions present in the BGE and second that from the added dodecyl sulfate anions. Bearing in mind that these weakly basic compounds can exhibit ion-pair and acid-base equilibria, the acid-base and ion-pair parasite reaction coefficients were determined. Finally, the effects of ionic strength, ion-pair interactions and acid-base properties on the effective electrophoretic mobilities of the analytes are discussed.     

Ligand exchange capillary electrophoresis by cyclodextrin derivatives, a powerful tool for enantiomeric separations

Five pure CD derivatives synthesized in our laboratory were used as chiral selectors in the presence of copper(II) ion. Three enantiomeric pairs of amino acids were submitted to separation experiments in CE, by exploiting the ligand exchange mechanism. The results obtained in the investigated systems, together with those of the analogous systems previously studied, clearly show the usefulness of this technique in chiral separations. By comparing the ligand exchange CE results with potentiometric results, either reported elsewhere or studied here for the first time (system Cu/CDampy/tyrosine), it has been possible to rationalise the separation results. The importance of the availability of pure selectors, and to characterise them both spectroscopically and thermodynamically is discussed.     

Chiral separation of deprenyl-N-oxide isomers by capillary electrophoresis using various cyclodextrin derivatives

Chiral separation of deprenyl-N-oxide isomers is presented using capillary electrophoresis in the presence of various cyclodextrin (CD) derivatives. This recently identified metabolite of R-(-)-deprenyl may possess desirable pharmacological activities. The effect of the cavity size and the substituents of the CD are examined on the enantiomer resolution of the compound having an asymmetric center on a heteroatom. The importance of hydrophilic or hydrogen bonding interaction, as well as the position of the interacting groups is demonstrated. Outstanding selectivity and resolution values are achieved using the chargeable carboxymethyl-beta-CD. 2-Hydroxypropyl-beta-CD is also suitable for the enantiomer separation of the analyte. Native beta-CD and carboxyethyl-beta-CD provide only poor enantioselectivity, whereas heptakis-(2,6-di-O-methyl)-beta-CD is capable of separating only the diastereomers. No chiral resolution can be observed in the presence of gamma-CD.     

Novel nonaqueous capillary electrophoresis separation and determination of bioactive flavone derivatives in Chinese herbs

Nonaqueous CE (NACE) coupled to UV detection is described for the separation and determination of bioactive flavone derivatives in Chinese herbs extraction. After optimization of electrophoresis parameters, including the electrolyte nature and the organic solvent composition, a reliable separation of the analytes in an ACN/methanol (60:40, v/v) mixture containing 80 mM Tris and 10 mM sodium cholate was performed. The detection was performed at 254 nm. Method performances, including migration time and peak area reproducibility, linearity, sensitivity, and accuracy, were evaluated. The method was applied to determine bioactive flavone derivatives in seven Chinese herbs.     

Prediction of selectivity for enantiomeric separations of uncharged compounds by capillary electrophoresis involving dual cyclodextrin systems

The single-isomer polyanionic cyclodextrin (CD) derivative heptakis-6-sulfato-beta-cyclodextrin (HSbetaCD) has been tested as chiral additive for the enantioseparation of non-steroidal anti-inflammatory drugs, such as fenoprofen, flurbiprofen, ibuprofen and ketoprofen, in capillary electrophoresis, using a pH 2.5 phosphoric acid-triethanolamine buffer in the reversed polarity mode. In most cases, the enantiomers of these acidic compounds, present in uncharged form at that pH, were only poorly resolved with HSbetaCD alone. However, the use of HSbetaCD in combination with the neutral CD derivative, heptakis-(2,3,6-tri-O-methyl)-beta-cyclodextrin (TMbetaCD), which has a particularly high enantioselectivity towards these compounds, has led to complete enantioresolution in reasonably low migration times in most cases. Affinity constants for the enantiomers with the two cyclodextrins were determined, using linear regression in a two-step approach. Affinity constants with the charged HSbetaCD were first calculated in single systems while those with the neutral TMbetaCD were determined in dual systems. Selectivity for the enantiomeric separation of these compounds in dual CD systems could be predicted using recently developed mathematical models.     

Chiral separation of anticholinergic drug enantiomers in nonaqueous capillary electrophoresis

Nonaqueous capillary electrophoretic (NACE) method for the separation of nine structurally similar chiral anticholinergic drugs was developed. The eight drug enantiomers were separated on baseline within 18 min using 20mM phosphoric acid and 10 mM NaOH, containing 10 mM heptakis(2,3-dimethyl-6-sulfato)-4beta-cyclodextrin (HDMS-beta-CD) in methanol. The results were compared with those obtained in the high performance liquid chromatography system.     

Comparison of three different anionic surfactants for the separation of hydrophobic compounds by nonaqueous capillary electrophoresis

The effect of the three different surfactants, sodium dodecyl sulfate (SDS), diethylhexyl sodium sulfosuccinate (AOT), and taurodexycholic acid sodium salt (STDC) on the nonaqueous capillary electrophoretic separations of hydrophobic compounds were compared with formamide containing 20 mM K2HPO4 as electrolyte solvent. Separations of all selected uncharged hydrophobic compounds, e.g., p-arylacetophones were shown to be strongly dependent on the kind of surfactant. The electrolyte containing 180 mM SDS provided the best result for the selected samples.     

New cyclodextrin derivatives as chiral selectors in capillary electrophoresis

The separation of three pairs of enantiomeric herbicides has been successfully achieved by capillary electrophoresis at two different pH values in the presence of cyclodextrin derivatives previously synthesized in our laboratory. Two of these derivatives constitute a new class of receptor, the hemispherodextrins, in which a trehalose capping moiety is bonded to β-cyclodextrin. Because of their peculiar structure hemispherodextrins have very promising characteristics and the low receptor concentration required to achieve separation deserves particular interest.     

New cyclodextrin derivatives as chiral selectors in capillary electrophoresis

The separation of three pairs of enantiomeric herbicides has been successfully achieved by capillary electrophoresis at two different pH values in the presence of cyclodextrin derivatives previously synthesized in our laboratory. Two of these derivatives constitute a new class of receptor, the hemispherodextrins, in which a trehalose capping moiety is bonded to beta-cyclodextrin. Because of their peculiar structure hemispherodextrins have very promising characteristics and the low receptor concentration required to achieve separation deserves particular interest.     

Optimization of the separation of Vinca alkaloids by nonaqueous capillary electrophoresis

A rapid method for the determination of Vinca alkaloids by nonaqueous capillary electrophoresis with diode array detection has been developed. A group of 11 alkaloids (catharanthine, vinorelbine, anhydrovinblastine, vinflunine, vindoline, 4-O-deacetylvinorelbine, 4-O-deacetylvinflunine, vindesine, vinblastine, 4'-deoxy-20',20'-difluorovinblastine, vincristine) could be readily separated within 10 min. The compounds were separated using a capillary of 38 cm effective length, a running buffer composed of 50 mM ammonium acetate and 0.6 M acetic acid in a methanol-acetonitrile (75:25, v/v) mixture. A constant voltage of 25 kV with a ramp time of 1 min and a 344.7 x 10(3) Pa pressure, applied simultaneously to inlet and outlet buffer vials, were used during sample analysis. Five of these alkaloids were selected for optimization of the separation and for validation studies with respect to specificity, linearity, range, limits of quantification and detection and then accuracy. The feasibility of the assay was demonstrated by analyzing a commercial sample of vinorelbine (Navelbine, ampoule at 10 mg/ml of vinorelbine base). The results were compared with a high-performance liquid chromatography method.     

Comparison of charged cyclodextrin derivatives for the chiral separation of atropisomeric polychlorinated biphenyls by capillary electrophoresis

Charged cyclodextrin (CD) derivatives were used as chiral selectors in electrokinetic chromatography (EKC) for the chiral separation of highly hydrophobic neutral racemates such as atropisomeric polychlorinated biphenyls (PCBs). beta-CD-phosphated, beta-CD sulfated, succinylated-gamma-CD (Succ-gamma-CD) and succinylated-beta-CD (Succ-beta-CD) were used as anionic CDs. As cationic CD, 6-monodeoxy-6-monoamino-beta-CD (beta-CD-NH(2)) was tested for the first time in order to separate PCBs. From the different CD derivatives employed, the best separations were obtained with the cationic CD derivative. Thus, the use of beta-CD-NH(2 )in phosphate buffer at pH 2.0 containing urea allowed the chiral recognition of eleven PCBs (45, 84, 88, 91, 95, 131, 136, 144, 149, 176, and 197). In this case, the addition of 2 M urea to the buffer solution was crucial to achieve the chiral separation of PCBs. The addition of acetonitrile to 10 mM phosphate buffer (pH 2.0) with 30 mM beta-CD-NH(2) and 2 M urea improved considerably the chiral resolution obtained for PCBs 91, 95, 136, 144, 149, and 197 although an increase in the analysis time was also observed. All the results obtained were compared with those previously obtained with the dual CD system carboxymethyl-gamma-CD/beta-CD.     

水相体系毛细管电泳与非水体系毛细管电泳分离手性药物的比较

将非水毛细管电泳(NACE)与传统的水相毛细管电泳从有机溶剂的添加、离子强度的改变以及pH的改变等方面作了一系列的对比性研究。在有机组分从10%增加到100%的过程中,被分离样品的迁移速率逐渐降低,其分离效率先呈升高的趋势,达到一个最大值后,在呈下降的趋势。这主要是由于缓冲介质粘度和介电常数的变化以及管壁Zeta电位的变化所造成的。在非水体系中,最佳分离pH要比在水相体系中高,其分离效率也是随着离子强度的增大而升高。     

Simultaneous separation of nine metal ions and ammonium with nonaqueous capillary electrophoresis

A simple and fast method for simultaneous separation of nine metal cations Ni2+, Cu2+, Co2+, Zn2+ Cd2+, K+, Na+, Mg2+ and Ca2+, and NH4+ in methanol is reported. The optimization for separation these 10 cations was achieved by using 0.5% acetic acid and 10 mM imidazole as electrolyte. The effects of water and ionic strength in the sample are discussed. The sensitive detection of transition metal ions was accomplished at 191 nm. The optimized method demonstrated high efficiency and good reproducibility, and was applied successfully to the qualitative and quantitative determination of transition metal ions in water samples, chemical reagents, oral zinc gluconate solution and human plasma.     

Enantiomer separation by nonaqueous and aqueous capillary electrochromatography on cyclodextrin stationary phases

Native beta- and gamma-cyclodextrin bound to silica (ChiraDex-beta and ChiraDex-gamma) were packed into capillaries and used for enantiomer separation by capillary electrochromatography (CEC) under aqueous and nonaqueous conditions. Negatively charged analytes (dansyl-amino acids) were resolved into their enantiomers by nonaqueous CEC (NA-CEC). The addition of a small amount of water to the nonaqueous mobile phase enhanced the enantioselectivity but increased the elution time. The choice of the background electrolyte (BGE) determined the direction of the electroosmotic flow (EOF). With 2-(N-morpholino) ethanesulfonic acid (MES) or triethylammonium acetate (TEAA) as BGE an inverse EOF (anodic EOF) was observed while with phosphate a cathodic EOF was found. The apparent pH (pH*), the concentration of the BGE, and the nature of the mobile phase strongly influenced the elution time, the theoretical plate number and the chiral separation factor of racemic analytes.