Adsorption, ordering, and chemistry of nitrobenzene on Si(1 0 0)-2 × 1

Surface chemistry of nitrobenzene on Si(1 0 0)-2 × 1 has been investigated using multiple internal reflection Fourier-transform infrared spectroscopy (MIR-FTIR), Auger electron spectroscopy (AES) and thermal desorption mass spectrometry. Molecular adsorption of nitrobenzene at submonolayer coverages is dominating at cryogenic temperatures (100 K). As the surface temperature is increased to 160 K, chemical reaction involving nitro group occurs, while the phenyl entity remains intact. Thus, a barrier of approximately 40.8 kJ/mol is established for the interaction of the nitro group of nitrobenzene with the Si(1 0 0)-2 × 1 surface. Further annealing of the silicon surface leads to the decomposition of nitrobenzene. The concentration of nitrogen and oxygen remains constant on a surface within the temperature interval studied here. AES studies also suggest that the majority of carbon-containing products remain bound to the surface at temperatures as high as 1000 K. The only chemical reaction leading to the release of the gaseous products is benzene formation around 670 K. The amount of benzene accounts only for a few percent of the surface species, while the rest of the phenyl groups connected to the silicon surface via a nitrogen linker remain stable even at elevated temperatures, opening an opportunity for stable surface coatings.     

Temperature dependent water adsorption on Bi2Sr2CaCu2O8 single crystal

Temperature dependent infrared study of water adsorption on the bc-plane of a Bi₂Sr₂CaCu₂O₈ (Bi2212) single crystal reveals that water is molecularly physisorbed, and forms hydrogen-bonded clusters in the temperature range of 85-150 K. Although dissociative adsorption is expected on surfaces terminated with Ca-O and Cu-O groups, no dissociated species is detected. The main absorption bands occur between 3200 and 3500 cm⁻¹ and are assigned to the O-H stretching and the overtone of O-H bending. For exposures higher than 1.0 L, the sticking coefficients are similar for different temperatures. The features in the O-H stretch region for water clusters red-shift as a function of temperature between 85 and 140 K. Water clusters have an amorphous structure between 85 and 140 K, and form a crystalline structure at 150 K.     

RAIRS investigations on the orientation and intermolecular interactions of adenine on Cu(1 1 0)

The adsorption of the DNA base adenine (C₅N₅H₅) on Cu(1 1 0) has been investigated as a function of coverage and temperature using reflection absorption infrared spectroscopy. These data provide important information on the nature of the local adsorbed complex and the intermolecular lateral interactions that come into play at high coverages. The RAIR spectra are consistent with an adsorption geometry in which the molecular ring is substantially tilted from the surface plane and in which the two amino hydrogens are equidistant from the surface, thus rationalising the appearance of a very strong βNH₂ scissoring mode, along with the activity of in-plane vibrational modes and the observation of the symmetric ν_symNH₂ stretch, but not the asymmetric ν_asymNH₂ stretch. In addition, coordination to the metal surface is proposed to occur at the N(9) position with a possible additional interaction through the N(3) position, both of which are the favoured coordination points in the metal complexes of adenine. This is a strong interaction and leads to a highly stable adsorbed layer. Our data also provide the first direct evidence of hydrogen bonding in the adlayer as coverage is increased, attributed to interactions between the amino group of one molecule and the N(1) and N(7) positions of a neighbouring species. When adsorption is carried out at room temperature, a very heterogeneous adlayer is created in which a diversity of molecular aggregates co-exist. However, upon annealing, a more ordered hydrogen bonded adlayer is formed in which one type of hydrogen bonding assembly is preferred. Finally, we propose that the hydrogen bonded assemblies created at a surface probably involve bent hydrogen bonds which arise from a compromise between the strong molecule-metal interactions that orientate the molecule and weaker lateral hydrogen bonding interactions that dictate the two-dimensional architecture.     

Coadsorption of CO and C6H6 on Co(0 0 0 1)

We have studied the influence of CO on the adsorption of benzene on the Co(0 0 0 1) surface using LEED, XPS, TDS and work function measurements. CO was found to reduce the benzene adsorption, but even at saturation CO exposure no complete blocking was observed. Thermal desorption of the coadsorbed layer featured CO and H₂ peaks indicating partial dehydrogenation of benzene and retaining of the CO bond. Ordered LEED structures were found with all coverages: Pre-adsorption of CO led to patterns already seen for pure carbon monoxide adsorption. Pre-adsorption of benzene showed the known structure of pure benzene also with small CO exposures, but higher CO exposures yielded a mixture of and patterns.     

RAIRS studies of CO adsorption on Pd/CeO2−x(1 1 1)/Pt(1 1 1)

Reflection absorption infrared spectroscopy (RAIRS) has been used to investigate the adsorption of CO on CeO_2−x-supported Pd nanoparticles at room temperature. The results show that when CeO_2−x is initially grown on Pt(1 1 1), a small proportion of the surface remains as bare Pt sites. However, when Pd is deposited onto CeO_2−x/Pt(1 1 1), most of the Pd grows directly on top of the CeO_2−x(1 1 1). RAIR spectra of CO adsorption on 1 ML Pd/CeO_2−x/Pt(1 1 1) show a broad CO-Pd band, which is inconsistent with a single crystal Pd surface. However, the 5 ML and 10 ML Pd/CeO_2−x/Pt(1 1 1) spectra show vibrational bands consistent with the presence of Pd(1 1 1) and (1 0 0) faces, suggesting the growth of Pd nanostructures with well defined facets.     

Deactivation of Pd particles supported on Nb2O5/Cu3Au(1 0 0): SFG and TPD studies from UHV to 100 mbar

Structural changes that occur on Pd-Nb₂O₅/Cu₃Au(1 0 0) model catalysts upon thermal annealing were followed by sum frequency generation (SFG) and temperature-programmed desorption (TPD) using CO as probe molecule. SFG experiments were performed both under ultrahigh vacuum and mbar pressure. Heating the catalyst to temperatures above 300 K lead to an irreversible 50% decrease in the CO adsorption capacity and modified the remaining adsorption sites. Alterations of the phase between resonant and non-resonant SFG signals upon annealing indicate a change in the electronic structure of the surface, which excludes Pd sintering or migration of Nb₂O₅ over Pd particles to cause the observed effect and rather suggests the formation of “mixed Pd-NbO_x” sites. The same changes in surface properties also occur during CO hydrogenation at 1 bar and high temperature, pointing to an involvement of “mixed Pd-NbO_x” sites in catalytic reactions.     

Probing the properties of the (1 1 1) and (1 0 0) surfaces of LaB6 through infrared spectroscopy of adsorbed CO

The adsorption of carbon monoxide on the LaB₆(1 0 0) and LaB₆(1 1 1) surfaces was studied experimentally with the techniques of reflection absorption infrared spectroscopy and X-ray photoelectron spectroscopy. The interaction of CO with the two surfaces was also studied with density functional theory. Both surfaces adsorb CO molecularly at low temperatures but in markedly different forms. On the LaB₆(1 1 1) surface CO initially adsorbs at 90 K in a form that yields a CO stretching mode at 1502-1512 cm⁻¹. With gentle annealing to 120 K, the CO switches to a bonding environment characterized by multiple CO stretch values from 1980 to 2080 cm⁻¹, assigned to one, two, or three CO molecules terminally bonded to the B atoms of a triangular B₃ unit at the (1 1 1) surface. In contrast, on the LaB₆(1 0 0) surface only a single CO stretch is observed at 2094 cm⁻¹, which is assigned to an atop CO molecule bonded to a La atom. The maximum intensity of the CO stretch vibration on the (1 0 0) surface is higher than on the (1 1 1) surface by a factor of 5. This difference is related to the different orientations of the CO molecules on the two surfaces and to reduced screening of the CO dynamic dipole moment on the (1 0 0) surface, where the bonding occurs further from the surface plane. On LaB₆(1 0 0), XPS measurements indicate that CO dissociates on the surface at temperatures above 400 K.     

Adsorption and thermal decomposition of N-methylaniline on Pt(1 1 1)

The adsorption and thermal decomposition of N-methylaniline (NMA) on the Pt(1 1 1) surface has been studied with reflection absorption infrared spectroscopy (RAIRS), temperature programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). NMA adsorbs molecularly at 85 K through the nitrogen lone pair and is stable up to 300 K. At temperatures of 300–350 K it converts to two or more surface intermediates including the N-methyleneaniline (NMEA) species. This NMEA intermediate dissociates upon annealing to 450 K, and further annealing leads to the desorption of HCN and H₂, leaving only C on the surface at 800 K.     

Adsorption and reaction of bicyclic hydrocarbons at Pt(1 1 1) and Sn/Pt(1 1 1) surface alloys: trans-decahydronaphthalene (C10H18) and bicyclohexane (C12H22)

Adsorption and desorption of trans-decahydronaphthalene (C₁₀H₁₈) and bicyclohexane (C₁₂H₂₂) can be used to probe important aspects of non-specific dehydrogenation leading to surface carbon accumulation and establish better estimates of activation energies for C-H bond cleavage at Pt-Sn alloys. This chemistry was studied on Pt(1 1 1) and the (2 × 2)-Sn/Pt(1 1 1) and (√3 × √3)R30°-Sn/Pt(1 1 1) surface alloys by using temperature programmed desorption (TPD) mass spectroscopy and Auger electron spectroscopy (AES). These hydrocarbons are reactive on Pt(1 1 1) surfaces and fully dehydrogenate at low coverages to produce H₂ and surface carbon during TPD. At monolayer coverage, 87% of adsorbed C₁₀H₁₈ and 75% C₁₂H₂₂ on Pt(1 1 1) desorb with activation energies of 70 and 75 kJ/mol, respectively. Decomposition of C₁₀H₁₈ is totally inhibited during TPD on these Sn/Pt(1 1 1) alloys and decomposition of C₁₂H₂₂ is reduced to 10% of the monolayer coverage on the (2 × 2)-Sn/Pt(1 1 1) alloy and totally inhibited on the (√3 × √3)R30°-Sn/Pt(1 1 1) alloy. C₁₀H₁₈ and C₁₂H₂₂ are more weakly chemsorbed on these two alloys compared to Pt(1 1 1) and these molecules desorb in narrow peaks characteristic of each surface with activation energies of 65 and 73 kJ/mol on the (2 × 2) alloy and 60 and 70 kJ/mol on the (√3 × √3)R30°-Sn/Pt(1 1 1) alloy, respectively. Alloyed Sn has little influence on the monolayer saturation coverage of these two molecules, and this is decreased only slightly on these two Sn/Pt(1 1 1) alloys. The use of these two probe molecules enables an improved estimate of the activation energy barriers E* to break aliphatic C-H bonds in alkanes on Sn/Pt alloys; E* = 65-73 kJ/mol on the (2 × 2)-Sn/Pt(1 1 1) alloy and E* ? 70 kJ/mol on the (√3 × √3)R30°-Sn/Pt(1 1 1) alloy.     

The IR spectra of Mg5C(CO) complexes on the (0 0 1) surfaces of polycrystalline and single crystal MgO

The FTIR spectroscopy of carbon monoxide adsorbed on polycrystalline MgO smoke has been investigated as a function of the CO equilibrium pressure at constant temperature (60 K) (optical isotherm) and of the temperature (in the 300–60 K range) at constant CO pressure (optical isobar). In both cases the spectra fully reproduce those of CO adsorbed on the (0 0 1) surface of UHV cleaved single crystals [Heidberg et al., Surf. Sci. 331–333 (1995) 1467]. This result, never attained in previous investigations on dispersed MgO, contribute to bridging the gap which is commonly supposed to exist between surface science and the study of “real” (defective) systems. Depending on the surface coverage θ the main spectral features due to the CO/MgO smoke interaction are a single band shifting from 2157.5 (at θ→0) to 2150.2 cm⁻¹ (at θ=1/4) or a triplet, at 2151.5, 2137.2 and 2132.4 cm⁻¹ (at θ>1/4). These manifestations are due to the ν(CO) modes of Mg_5C²⁺· · · CO adducts formed on the (0 0 1) terminations of the cubic MgO smoke microcrystals. The formation of the CO monolayer is occurring in two different phases: (i) a first phase with CO oscillators perpendicularly oriented to the surface (2157–2150 cm⁻¹) and (ii) a second phase constituted by an array of coexisting perpendicular and tilted species (triplet at 2151.5, 2137.2 and 2132.4 cm⁻¹). A much weaker feature at 2167.5–2164 cm⁻¹ is assigned to Mg_4C²⁺· · · CO adducts at the edges of the microcrystals. The heat of adsorption of the perpendicular Mg_5C²⁺· · · CO complex in the first phase has been estimated from the optical isobar and results to be 11 kJ mol⁻¹.     

Hydrogen adsorption on Mo1−xRex(110) (x=0–0.25) surfaces

The effects of adsorbed H on the Mo_1−xRe_x(110), x=0, 0.05, 0.15, and 0.25, surfaces have been investigated using low-energy electron diffraction (LEED) and high-resolution electron energy loss spectroscopy (HREELS). For the x=0.15 alloy only, a c(2×2) LEED pattern is observed at a coverage Θ0.25 ML. A (2×2) pattern is observed for H coverages around Θ0.5 ML from surfaces with x=0, 0.05, and 0.15. Both c(2×2) and (2×2) patterns are attributed to reconstruction of the substrate. At higher coverages, a (1×1) pattern is observed. For the alloy surface with x=0.25, only a (1×1) pattern is obtained for all H coverages. Two H vibrations are observed in HREELS spectra for all Re concentrations, which shift to higher energies at intermediate coverages. Both peaks exhibit an isotopic shift, confirming their assignment to hydrogen. For Re concentrations of x=0.15 and higher, a third HREELS peak appears at 50 meV as H (D) coverage approaches saturation. This peak does not shift in energy with isotopic substitution, yet cannot be explained by contamination. The intrinsic width of the loss peaks depends on the Re concentration in the surface region and becomes broader with increasing x. This broadening can be attributed to surface inhomogeneity, but may also reflect increased delocalization of the adsorbed hydrogen atom.     

Reactivity of 3-hexyne on oxygen modified Ru(0 0 1) surfaces: Observation of oxametallacycles by RAIRS

The chemical behaviour of 3-hexyne on oxygen modified Ru(0 0 1) surfaces has been analysed under ultrahigh-vacuum, using reflection-absorption infrared spectroscopy (RAIRS). The effects of oxygen coverage, 3-hexyne exposure and adsorption temperature were studied. Two modified Ru(0 0 1) surfaces were prepared: Ru(0 0 1)-(2 × 2)-O and Ru(0 0 1)-(2 × 1)-O that correspond to oxygen coverages (θ_O) of 0.25 and 0.5 ML, respectively. The striking result is the direct bonding to an O atom when the modified surfaces are exposed to a very low dose (0.2 L) of 3-hexyne at low temperature (100 K). For θ_O = 0.25 ML, an unsaturated oxametallacycle [Ru-O-C(C₂H₅)C(C₂H₅)-Ru] is proposed, identified by RAIRS for the first time, through the νCC and νCO modes. Further decomposition at 110 K yields smaller oxygenated intermediates, such as acetyl [μ₃-η²(C,O)-CH₃CO], co-adsorbed with a small amount of carbon monoxide and non-dissociated species. The temperature at which a fraction of molecules undergoes complete C-C and C-H bond breaking is thus much lower than on clean Ru(0 0 1). The ultimate decomposition product observed by RAIRS at 220 K is methylidyne [CH]. Another key observation was that the adsorption temperature is not determinant of the reaction route, contrarily to what occurs on clean Ru(0 0 1): even when 3- hexyne strikes the surface at a rather high temperature (220 K), the multiple bond does not break completely. For θ_O = 0.5 ML, a saturated oxametallacycle [Ru-O-CH(C₂H₅)-CH(C₂H₅)-Ru] is also proposed at 100 K, identified by the ν_asO-C-C (at 1043 cm⁻¹) and ν_sO-C-C (at 897 cm⁻¹) modes, showing that some decomposition with C-H bond breaking occurs. For this oxygen coverage, the reaction temperatures are lower, and the intermediate surface species are less stable.     

An example of chemistry-morphology interaction: making up for the geometric and energetic heterogeneities of the (1 0 0) surface of single crystalline silicon by high-temperature treatments in H2

A lot of work has been carried out to prepare chemically homogeneous (1 0 0) silicon surfaces. The hydrogen-terminated (1 0 0) silicon surfaces are the most promising ones, especially in view of their remarkable environmental stability. The simplest way to produce hydrogen-terminated surfaces (attack in water solution of HF of a sacrificial, thermally grown, oxide) results in strongly heterogeneous rough surfaces (although with prevailing dihydride terminations). These surfaces can, however, be flattened and homogenized by treating them in H₂ at high temperature (>850 C). The morphological and chemical changes undergone by the surface during the treatment are studied X-ray photoelectron spectroscopy, atomic force microscopy, scanning tunnelling microscopy, infrared absorption spectroscopy in the attenuated total reflection mode, reflection high energy electron diffraction and thermal programmed desorption, and the mechanisms responsible for them are discussed.     

A quantum-mechanical study of the vinyl fluoride adsorbed on the rutile TiO2(1 1 0) surface

The adsorption of vinyl fluoride on the rutile TiO₂(1 1 0) surface has been simulated, on the basis of a recently proposed experimental model, using hybrid-exchange density functional theory. Different surface coverages have been considered and the lateral interaction between adsorbed vinyl fluoride molecules has been quantified through a simple model of nearest and next nearest neighbouring molecules. The vibrational frequencies of the adsorbed molecule have been calculated and are found to be in excellent agreement with those observed providing support for the proposed adsorption model. The effect of the adsorption on the electronic structure of the molecule and the surface have been characterised by computing electrostatic potential maps and the local density of states.     

Steric effect of methyl, methoxy, and ethyl substituents on the excimer formation of naphthalene on Al2O3(0 0 0 1)

Structural relaxation of molecules on surfaces can be monitored by observing the spectral evolution as increasing amount of thermal energy is made available. Naphthalene forms excimers in the excited state when amorphously prepared, but relaxes to a more ordered state when heated. Substituent groups on the naphthalene can substantially alter the available pathways during the thermally induced structural relaxation, and is reflected in the formation of excimer or trap fluorescence. A general correlation was determined for the naphthalene substitution with methyl, methoxy, and ethyl groups on the 1- and 2-positions with the pathway taken by the molecular adlayer.     

Effects of potassium on the reaction pathway of C3H7 species over Mo2C/Mo (1 0 0)

The adsorption and surface reactions of propyl iodide on clean and potassium-modified Mo₂C/Mo(1 0 0) surfaces have been investigated by thermal desorption spectroscopy (TPD), X-ray photoelectron spectroscopy (XPS) and high resolution electron energy loss spectroscopy (HREELS) in the 100-1200 K temperature range. This work is strongly related to the better understanding of the catalytic effect of Mo₂C in the conversion of hydrocarbons. Potassium was found to be an effective promoter: it induced the rupture of C-I bond in the adsorbed C₃H₇I even at 100 K. The extent of C-I bond scission varied approximately linearly with the concentration of K coverage at the adsorption temperature of 100 K. As revealed by HREELS and TPD measurements the primary products of the dissociation are C₃H₇ and I. The former one was stabilized by potassium and underwent dehydrogenation and hydrogenation to give propene and propane. The desorption of both compounds is reaction-limited process. A fraction of propyl groups was converted into di-σ-bonded propene, which was stable up to ∼380 K. The coupling reaction of propyl species was also facilitated by potassium and resulted in the formation of hexane and hexene with T_p ∼ 230-250 K. Hydrogen was released with T_p = 390 K, indicative of a desorption limited process. The effect of potassium was explained by the extended electron donation to adsorbed propyl iodide in one hand, and by the direct interaction between potassium and I on the other hand. This was reflected by the shift of the desorption of potassium from the coadsorbed layer at and above 1.0 ML to higher temperature, and by the coincidal T_p values (∼700 K) of potassium and iodine. The formation of KI was also supported by the appearance of a loss feature at 650 cm⁻¹ in the HREEL spectra attributed to a phonon mode of KI.     

Adsorption and decomposition of NO on K-deposited Pd(1 1 1)

The adsorption and decomposition of NO on a K-deposited Pd(1 1 1) surface were investigated using X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, and temperature-programmed desorption. For the K-deposited Pd(1 1 1) surface, two different NO adsorption sites were observed in addition to the Pd site. On the clean Pd(1 1 1) surface, the adsorption of NO was purely molecular and reversible, but on the K-deposited surface, the adsorbed NO decomposed at two different temperatures, 530 and 610 K. These results indicate that the NO adsorption and decomposition sites were newly created by the deposition of K onto the Pd(1 1 1) surface.     

Adsorption behavior and reaction properties of NO and CO on Rh(1 1 1)

Reactions between NO and CO on Rh(1 1 1) surfaces were investigated using infrared reflection absorption spectroscopy, X-ray photoelectron spectroscopy, and temperature-programmed desorption. NO adsorbed on the fcc, atop, and hcp sites in that order, whereas CO adsorbed initially on the atop sites and then on the hollow (fcc + hcp) sites. The results of experiments with NO exposure on CO-preadsorbed Rh(1 1 1) surfaces indicated that the adsorption of NO on the hcp sites was inhibited by preadsorption of CO on the atop sites, and NO adsorption on the atop and fcc sites was inhibited by CO preadsorbed on each type of site, which indicates that NO and CO competitively adsorbed on Rh(1 1 1). From a Rh(1 1 1) surface with coadsorbed NO and CO, N₂ was produced from the dissociation of fcc-NO, and CO₂ was formed by the reaction of adsorbed CO with atomic oxygen from dissociated fcc-NO. The CO₂ production increased remarkably in the presence of hollow-CO. Coverage of fcc-NO and hollow-CO on Rh(1 1 1) depended on the composition ratio of the NO/CO gas mixture, and a gas mixture with NO/CO ? 1/2 was required for the co-existence of fcc-NO and hollow-CO at 273 K.     

Relation between surface resistance, infrared-, surface enhanced infrared- and surface enhanced Raman-spectroscopy’s of C2H4 and CO on copper

The common basis of the observations made with the four experimental methods is the transient electron transfer from the metal to the lowest unoccupied electronic states of the adsorbed molecules.     

The adsorption of ethylene on Au/Pd(1 1 1) alloy surfaces

The adsorption of ethylene on gold-palladium alloys formed on a Pd(1 1 1) surface is investigated using a combination of temperature-programmed desorption (TPD) and reflection absorption infrared spectroscopy (RAIRS). Various alloy compositions are obtained by depositing four monolayers of gold on a clean Pd(1 1 1) surface and annealing to various temperatures. For gold coverages greater than ∼0.7, ethylene adsorbs primarily on gold sites, desorbing with an activation energy of less than 55 kJ/mol. At gold coverages between ∼0.5 and ∼0.7, ethylene is detected on palladium sites in a π-bonded configuration (with a σ-π parameter of ∼0.1) desorbing with an activation energy of between ∼57 and 62 kJ/mol. Further reducing the gold coverage leads to an almost linear increase in the desorption activation energy of ethylene with increasing palladium content until it eventually reaches a value of ∼76 kJ/mol found for ethylene on clean Pd(1 1 1). A corresponding increase in the σ-π parameter is also found as the gold coverage decreases reaching a value of ∼0.8, assigned to di-σ-bonded ethylene as found on clean Pd(1 1 1).