Tunneling studies on single crystals of superconducting Bi2Ca1−xYxSr2Cu2O8+δ

Tunneling studies have been carried out on single crystals of Bi₂Ca_1−xSr_xCu₂O_8+δ over a wide range of compositions wherein the hole concentration varies by a factor of 2.5. The 2Δ value varies between 25 meV and 75 meV over the composition range studied, but scales with 2Δ/k_BT_c≈9.5 throughout.     

Temperature dependence of the critical current in YBa2Cu3O7−δ and Bi2Sr2Ca1Cu2O8 Josephson junctions

We have studied the stationary Josephson effect on YBa₂Cu₃O_7−δ (T_c=90 K) and Bi₂Sr₂Ca₁Cu₂ O₈ (T_c=80 K and 87 K for two samples of different origin) ceramic based junctions. The temperature dependence of the critical current near T_c has been found as I_c≈(T_c-T) for the Y-Ba-Cu-O samples indicating that they should be classified as S-N-I-N-S type junctions. The I-V curves of the Bi-Sr-Ca-Cu samples show the typical behaviour of S-I-S structures. Using Ambegaokar-Baratoff's theory for Bi₂Sr₂Ca₁Cu₂O₈, the temperature dependence of the superconducting state gap Δ(T) was calculated and it was evaluated that 1.452Δ(0)/k_BT_c3.5.     

ESR of double-perovskite Sr2FeMoO6

We present an ESR study of Sr₂FeMoO₆ in the paramagnetic region. A single line at g≈2 was associated with Fe³⁺ ions. The intensity follows Curie–Weiss law in the whole T range. For T >500 K a secondary line is attributed to ferromagnetic (FM) impurities. The line width is described by ΔH_pp(T)=ΔH_pp(∞)(1−Θ/T) with a high value for ΔH_pp(∞). The absence of narrowing effects is a signature of double-exchange (DE) interactions and indicates that DE drives the FM ordering at a relatively high T_c.     

EPR evidence of local lattice mode in K3H(SO4)2 and Rb3H(SO4)2 fast-proton conductors

The observation of an anomalous temperature dependence of Mn²⁺ EPR spectra linewidth and nonaxial crystal-field parameter in K₃H(SO₄)₂ and Rb₃H(SO₄)₂ allows one to suggest the presence of “local mode” predicted by Yamada (Ferroelectrics 170 (1995) 23). The activation energy for this kind of excitation was found and equals 11.3 (0.5) and 7.4 (0.3) meV for Mn²⁺ doped K₃H(SO₄)₂ and Rb₃H(SO₄)₂, respectively.     

Direct measurement of the magnetocaloric effect in La0.67Ca0.33MnO3

Polycrystalline perovskite La_0.67Ca_0.33MnO₃ was synthesized by a sol–gel method. Its adiabatic temperature change ΔT_ad induced by a magnetic field change was measured directly. At 268 K, near its Curie temperature T_C, ΔT_ad of La_0.67Ca_0.33MnO₃ induced by a magnetic field change of 2.02 T reaches 2.4 K. The latent heat Q and magnetic entropy change −ΔS_M induced by a magnetic field change were calculated from the temperature dependence of ΔT_ad and zero-field heat capacity C_p. The maximum values of Q and −ΔS_M in La_0.67Ca_0.33MnO₃ induced by a magnetic field change of 2.02 T are 1.85 J g⁻¹ and 6.9 J kg⁻¹ K⁻¹, respectively. The former is larger than the phase transition latent heat of heating or cooling, which is about 1.70 J g⁻¹.     

Cu NMR study of the superconducting thiospinel Cu1.5Rh1.5S4

The ⁶³Cu NMR Knight shift K and spin-lattice relaxation rate 1/T₁ have been measured to study the thiospinel superconductor Cu_1.5Rh_1.5S₄ from a microscopic viewpoint. K is negative and has a weak dependence on temperature, and the hyperfine coupling constant H_hf^d is estimated to be −52.4 kOe/μ_B. 1/T₁ is proportional to the temperature in the normal state. In the superconducting state, 1/T₁ takes a coherence peak just below T_c, and decreases exponentially well below T_c, from whose temperature dependence the superconducting energy gap has been proved to be close to 2Δ = 3.52k_BT_c given by the BCS theory.     

Inhomogeneous Tl NMR line broadening in Tl2Ba2CuOx single crystals

Temperature and angular dependences of ²⁰⁵Tl line width, Δ , and transverse relaxation time, τ, have been measured in two crystals of Tl₂Ba₂CuO_x with T_c = 32 and 115 K, respectively. In the normal state both Δ and τ have been found to be temperature-independent and not to vary with varying T_c, implying that the size of inhomogeneous broadening is also invariable. Analysis of the line width angular dependence shows that the inhomogeneous broadening originates, most probably, from local distortions associated with Cu substitution for Tl. A conclusion is that variations in T_c are not related to this substitution.     

Magnetic pair making and breaking effect of Ru in La0.7Sr0.3Mn0.9Ru0.1O3 and La0.5Sr0.5Co0.9Ru0.1O3

The substitutional effect of Ru on the magnetic and transport properties of double exchange ferromagnets, La_0.7Sr_0.3MnO₃ and La_0.5Sr_0.5CoO₃ has been investigated. It is found that substitution of 10% Ru at the Mn site of La_0.7Sr_0.3MnO₃ decreases the Curie temperature by 20 K than that of the parent compound. However, a large decrease in the Curie temperature, ΔT_c80 K and the system undergoes a transition from metallic state to insulating state is observed when 10% Ru is doped in La_0.5Sr_0.5CoO₃. The marginal effect of Ru in the Mn–O–Mn sublattice in comparison to the Co–O–Co sublattice could be due to the magnetic exchange interaction between Mn and Ru by virtue of the fact that Ru exhibits variable valence states, Ru⁺⁴/Ru⁺⁵. The e_g and t_2g parentage of Ru⁺⁵ is similar to Mn⁺⁴ and therefore, Ru⁺⁵ ion appears to participate in the double exchange mediated ferromagnetic (FM) interaction. On the other hand, Ruthenium (IV) ion disrupts an intermediate spin state of cobalt (Co⁺³: t_2g⁵e_g¹), forcing a double exchange FM state to anti-FM state.     

Microscopic measurements in La-NQR of the ternary carbide superconductor LaNiC2

¹³⁹La-NQR measurements have been carried out in the ternary carbide superconductor LaNiC₂. The nuclear quadrupole frequency and the asymmetry parameter of ¹³⁹La in LaNiC₂ were estimated to be about 1.9 MHz and 0, respectively. In the normal state, the nuclear spin relaxation rate (1/T₁) in the ¹³⁹La NQR signal was proportional to temperature (T) in zero external field above the superconducting transition temperature (T_c) or in an external field larger than the superconducting critical field, which means the system is in the Fermi-liquid state. In the superconducting state, on the other hand, 1/T₁ decreases no more linearly with T, but decreases rapidly exponentially as exp (−Δ/k_BT) at low T with an appreciable enhancement just below T_c. The value of the superconducting energy gap, 2Δ, was estimated to be 3.34k_BT_c, compared with 3.52k_BT_c of the BCS-value. This result strongly suggests that the superconductivity in LaNiC₂ is of a conventional BCS type.     

Fabrication, microstructure and critical current density of screen-printed Ag-(Bi, Pb)2Sr2Ca2Cu3Ox superconducting tapes

The influence of the sintering conditions on the microstructure and critical current density J_c has been studied on screen-printed Ag-(Bi, Pb)₂Sr₂Ca₂Cu₃O_x tapes with a ceramics mono-layer core. Three kinds of fabrication processes, which consist of a combination of cold working (rolling and/or pressing) and sintering, are applied. Four times repetition of pressing and sintering after the pre-sintering produces the highest c-axis alignment and achieves J_c= 1.5 × 10⁴ A/cm² (77 K, 0 T). The J_c versus θ data with an angle θ between B and the c-axis elucidate the relation between the anisotropy ratio γ=J_c(Bc)/J_c(B|c and the half-height angular width Δθ of a peak for Bc. This is related to both grain alignment and the J_c value. An increase in J_c, which comes from an improvement for grain alignment, enhances γ and narrows Δθ. The J_c versus θ data are fitted to the expression J_c(B, θ)=J _c(B, 90°)/[(γ−1)|cos θ|ⁿ+1] by regarding both γ and n as adjustable parameters. Fabrication of screen-printed tapes with multilayers (1≤N≤5) is presented, where the critical current increases from 8.0 A to 30.2 A at 77 K and 0 T as N increases.     

Temperature dependence of ESR anisotropy in La7/8Sr1/8MnO3

We report X-ray diffraction, DC-susceptibility, electron spin resonance (ESR), and dilatometry measurements carried out on an La_7/8Sr_1/8MnO₃ single crystal. Thermal expansion was measured along different crystallographic axes using a three-terminal dilatometer. The sharp anomalies observed in the temperature dependence of Δl/l allowed us to locate the Jahn–Teller transition at T_JT=285(1) K. ESR experiments were carried out in the paramagnetic regime from 220 to 570 K, at 9.4 GHz. We measured the ESR line width ΔH_pp(T) with the magnetic field parallel to the crystallographic directions [1 0 0] and [0 0 1], referred to the orthorhombic (Pbnm) axes. We correlate the temperature dependence of ΔH_pp with the structural changes of the lattice.     

Desorption of H2 from W(110) and Fe covered W(110) surfaces

The kinetics of H₂ desorption from H/W(110) and H/Fe₁/W(110) were studied by measuring work function changes Δø vs time at a number of temperatures. Combination with previously determined Δø vs coverage data and differentiation at various fixed coverages gave rate vs T data from which activation energies of desorption could be obtained. E vs coverage results agree well with previously determine ΔH_des results. In the case of H/Fe₁/W(110) this includes a rise from 20 to 30 kcal mol⁻¹ of H₂ at H/Fe = H/W > 0.3. Plots of rate −dθ/dt vs θ (θ being coverage in units of H/W) vary much more steeply than θ² at most coverages for both systems. The θ dependence can be explained almost quantitatively in terms of the variations of ΔH_des and surface entropy S_s with coverage, by assuming that rates of desorption are equal to the equilibrium rates of adsorption. The latter can be formulated thermodynamically, except for a sticking coefficient, s. Values for s(θ, T) can also be obtained and show relatively little temperature dependence.     

Low-temperature AC conductivity of Bi2Sr2CaCu2O8+δ

We report measurements of anamolously large dissipative conductivities, σ₁, in Bi₂Sr₂CaCu₂O_8+δ at low temperatures. We have measured the complex conductivity of Bi₂Sr₂CaCu₂O_8+δ thin films at 100–600 GHz as a function of doping from the underdoped to the overdoped state. At low temperatures there exists a residual σ₁ which scales with the T=0 superfluid density as the doping is varied. This residual σ₁ is larger than the possible contribution to σ₁ from a thermal population of quasiparticles (QP) at the d-wave gap nodes.     

Scattering-controlled recombination of Δ2-light-hole indirect excitons and apparently enhanced quantum confined Stark effect in tensilely strained Si1−yCy/Si (0 0 1) quantum wells

Anomalies are found in the near-band-edge luminescence properties of Δ₂-light-hole indirect excitons in Si_1−yC_y-based tensilely strained quantum wells (QWs). The experimental spectra exhibit a clear signature of phonon-assisted transitions on the lower energy side of the “no-phonon” transition, which indicates the relevance of “virtual” indirect valleys and in-plane k-dispersion, as opposed to the theoretical prediction that the zone-centered Δ₂ valleys take over the conduction band edge. Intervalley scattering between [0 0 1]-Δ₂ valleys and in-plane Δ₄ valleys is suggested as the underlying mechanism. On the other hand, the experimental evidence was found for “apparently enhanced” quantum-confined Stark red shifts for Si_1−yC_y-based QWs. However, quantitative estimates are in conflict with the experimental results and predict a blue shift due to exciton weakening which masks the Stark effect as in the case of Δ₄-heavy hole excitons in Si_1−xGe_x-based QWs.     

Study on the superconducting composite material formation in the system Bi2Sr2CaCu2O8+x/Al-containing phases

Phase evolution in the Bi---Sr---Ca---Cu---Al---O system was studied. Two Al-containing phases BiSr_1.5Ca_0.5Al₂O_z and (Sr_1−xCa_x)₃Al₂O₆ (x = 0.4 − 0.45) were determined to be chemically compatible with Bi_2.18Sr₂CaCu₂O_8+x (Bi-2212) at temperatures of the samples processing. The phase equilibria in the title system were investigated above the solidus temperature. The BiSr_1.5Ca_0.5Al₂O_z was found to be in equilibrium only with the melt and the (Sr_1−xCa_x)₃Al₂O₆ phase. This latter aluminate equilibrated with Ca,Sr cuprates, CaO, the Cu-free phase, and the liquid. The melting and solidification in Bi-2212, doped with the aluminate, corresponded to the reversible reaction Bi-2212 + BiSr_1.5Ca_0.5Al₂O_z ↔ (Sr_1−xCa_x)₃Al₂O₆ + liquid. Two sets of superconducting composite materials with initial compositions Bi-2212 + nBiSr_1.5Ca_0.5Al₂O_z and Bi-2212 + m(Sr_1−xCa_x)₃Al₂O₆ were prepared by solidification from the partial melt. The former material was composed mostly of large Bi-2212 lamellas separated by the BiSr_1.5Ca_0.5Al₂O_z phase, which destroyed superconducting links between Bi-2212 grains. The latter material consisted of a Bi-2212 polycrystalline matrix with high concentration of small (ca. 3 μm) grains of (Sr_1−xCa_x)₃Al₂O₆ imbedded in Bi-2212 lamellas. The Bi-2212 + m(Sr_1−xCa_x)₃Al₂O₆ materials displayed a trend to enhance flux pinning at T = 60 K with the increase of aluminate phase content.     

Dilatometry of the high-temperature proton conductor Ba3Ca1.18Nb1.82O9 − δ

Firstly, the production of solid bulk specimens of the proton conductor Ba₃Ca_1.18Nb_1.82O_{9 − gd} (BCN18) of known water content up to [H^.] = n_H/n_Ba = 0.16 is described. Secondly, measuring the length change of such samples versus water content [H^.] demonstrated that the sample lengths increased linearly with a slope of (Δl/l)/[H^.] = (2.13 ±0.07) × 10⁻². Thirdly, the density of bulk samples was found to decrease linearly with water content [H^.]. This decrease was in good agreement with the above values derived from the length change. Fourthly, high temperature dilatometry showed that samples reach the thermodynamic solubility values in water vapor atmospheres only at temperatures above 700 °C. Two time scales were observed for the time-dependence of the elongation upon exposure to water vapor. A fast process occurred within minutes above 700 °C, a slow one took several hours. The fast one was identified as the chemical diffusion of the diffusion pair H^. and V_o^. which is required for the water uptake and loss of BCN18. The chemical diffusivity of water is described by the parameters D₀ = (0.022 ± 0.002) cm²/s and ΔH* = (0.79 ± 0.05) eV.     

铁基超导体FeSe0.5Te0.5表面隧道谱的研究

用扫描隧道显微镜/谱仪仔细研究了铁基超导单晶FeSe_0.5Te_0.5样品的表面形貌和隧道谱, 测量到了清晰的表面原子形貌和在空间比较稳定的隧道谱结构．在样品中测量的隧道谱零能态密度比较高, 说明样品里面有比较强的非弹性准粒子散射. 在正能5 mV附近有个较大的背景鼓包, 这一背景在很高温度也未消失. 空间中Se和Te集中的位置会带来高能背景的变化, 超导能隙附近谱的形状大致相同. 较强的非弹性准粒子散射破坏了超导的准粒子散射, 因此没有在二维微分电导图中发现超导准粒子相干散射的特征亮斑.     

High-resolution electron microscopy study of Ni81Fe19 film with Co33Cr67 buffer layer

The anisotropic magnetoresistance (AMR) in permalloy Ni₈₁Fe₁₉ film deposited on a 1.2 nm Co₃₃Cr₆₇ buffer layer was significantly enhanced. The high-resolution electron microscopy was used to study the microstructure of Ni₈₁Fe₁₉ film with and without Co₃₃Cr₆₇ buffer layer. It was found that Co₃₃Cr₆₇ buffer layer can induce good (1 1 1) texture, while without Co₃₃Cr₆₇ buffer layer, Ni₈₁Fe₁₉ film show randomly oriented grain structure. The Δρ/ρ enhancement is attributed to the decrease in the resistivity ρ of the Ni₈₁Fe₁₉ film due to the formation of the large (1 1 1) textured grains in Ni₈₁Fe₁₉ film with Co₃₃Cr₆₇ buffer layer. However, the surface roughness of substrate may limit the (1 1 1) textured grain size and induce additional grain boundaries in Ni₈₁Fe₁₉ film with Co₃₃Cr₆₇ buffer layer, limit the enhancement of the AMR effect.     

Electromagnetic final-state interactions in the leptonic decays of the neutral kaon (I) Kℓ3 mode

We present a calculation of the Coulomb final-state interaction effects in the decays K_L → π ℓ^±V_ℓ. Specifically we investigate the charge asymmetry and the transverse polarization of the charged lepton. We consider the effects of possible ΔQ = −ΔS amplitudes and the q² dependence of the form factors. The variation of the effects over the Dalitz plot is discussed and many numerical results are given.