Cisplatin-loaded polymer/magnetite composite nanoparticles as multifunctional therapeutic nanomedicine

Multifunctional nanocarriers with multilayer core-shell architecture were prepared by coating superparamagnetic Fe3O4 nanoparticles with diblock copolymer folate-poly（ethylene glycol）-b-poly（glycerol monomethacrylate） （FA-PEG-b- PGMA）, and triblock copolymer methoxy poly（ethylene glycol）-b-poly（2-（dimethylamino） ethyl methacrylate）-b- poly（glycerol monomethacrylate） （MPEG-b-PDMA-b-PGMA）. The PGMA segment was attached to the surfaces of Fe304 nanoparticles, and the outer PEG shell imparted biocompatibility. In addition, folate was conjugated onto the surfaces of the nanocarriers. Cisplatin was then loaded into the nanocarrier by coordination between the Pt atom in cisplatin and the amine groups in the inner shell of the multilayer architecture. The loaded cisplatin showed pH-responsive release： slower release at pH 7.4 （i.e. mimicking the blood environment） and faster release at more acidic pH （i.e. mimicking endosome/lysosome conditions）. All of the cisplatin-loaded nanoparticles showed concentration-dependent cytotoxicity in HeLa cells. However, the folate-conjugated cisplatin-loaded carriers exhibited higher cytotoxicity in HeLa cells than non-folate conjugated cisplatin-loaded carriers.     

Synthesis of Starch-g-Poly(glycidyl methacrylate) and Its Blending with Poly(ϵ-caprolactone) and Nylon 610

Different amounts of glycidyl methacrylate (GMA) were grafted onto corn starch dispersed in water or dimethyl sulfoxide (DMSO) to yield starch-graft-poly(glycidyl methacrylate) (ST-g-PGMA). ST-g-PGMAW, obtained by grafting PGMA onto corn starch that was dispersed in water, showed a higher PGMA grafting content and a lower content of the homopolymerized PGMA than ST-g-PGMAD, which was prepared in DMSO. The modified starches were blended with poly(ϵ-caprolactone) (PCL) and nylon 610, respectively, and the tensile properties of the blends were measured by UTM. Mechanical properties of the biodegradable ST-g-PGMA/PCL blends were dependent on the PGMAD content grafted on starch. Without dramatic loss of the tensile properties of PCL, ST-g-PGMAW was melt blended with PCL. Meanwhile, an increase in the tensile modulus was observed in the ST-g-PGMAW/nylon 610 blend. When nylon 610 was reacted with ST-g-PGMAW in DMSO in the presence of triethylamine, the tensile modulus and strength were much higher than those of the pure nylon 610, and phase-separated domains of starch were not observed microscopically.     

Fluorination of perfluoroalkylsulfenyl chlorides,perfluorodialkyl disulfides and perfluorodialkyl sulfides with chlorine monofluoride

In reactions with perfluoroalkylsulfenyl chlorides (R_fSCl; R_f = F₃, C₂F₅, n-C₃F₇, n-C₄F₉) and perfluoroalkyl disulfides (R_fSSR_f′; R_f = R_f′ = CF₃, R_f = CF₃, R_f′ = C₂F₅) at 25°, chlorine monofluoride acts primarily as a chlorinating and fluorinating reagent to give the corresponding perfluoroalkylsulfur chloride tetrafluorides, R_fSF₄Cl, in good yields. However, small amounts of perfluoroalkylsulfur pentafluorides, R_fSF₅, are also obtained. A mixture of the cis and trans isomers of bis(trifluoromethyl)sulfur tetrafluoride and of trifluoromethyl pentafluoroethylsulfur tetrafluoride has been formed by the reaction of the corresponding bis(perfluoroalkyl) sulfides and chlorine monofluoride. The new perfluoroalkylsulfur chloride tetrafluorides are colorless, unpleasant smelling liquids. The infrared, mass and ¹⁹F NMR spectral data, as well as thermodynamic and elementary analysis data, are given for the new compounds.     

Temperature Dependant Micellization of AOT in Aqueous Medium: Effect of the Nature of Counterions

The lithium, potassium, and ammonium salts of bis (2‐ethylhexyl) sulphosuccinic acid have been prepared from the sodium salt (AOT) by applying ion‐exchange technique. The critical micellization concentrations (cmc) of the surfactants with four different counterions have been determined at a temperature range of 10°C to 40°C using surface tension as well as electrical conductivity measurements. Observed data have been utilized to evaluate the ionization degree (counter ion association constant),α, and various thermodynamic parameters of micellization viz, free energy, enthalpy, entropy changes of micelle formation, and also the surface parameters (Γ_max, A_min) in aqueous media. The value of cmc decreases with hydrated ionic size of the counter ions (except K⁺) and follows the order NH₄ ⁺>Na⁺>Li⁺>K⁺. While large negative free energy change (ΔG⁰ _m) and the positive entropy change (ΔS⁰ _m) favor the micellization process thermodynamically, nature of their variation with counterion supports the involvement of counterion size factor in micellization process via a change in the hydrophilicity of surfactant head group.     

Silica nanoparticle covered with mixed polymer brushes as Janus particles at water/oil interface

Silica nanoparticles (NSiO₂) are modified with mixed polymer brushes derived from a block copolymer precursor, poly(methyl methacrylate)-b-poly(glycidyl methacrylate)-b-poly(tert-butyl methacrylate) with short middle segment of PGMA, through one step ??grafting-onto?? approach. The block polymer precursors are prepared via reversible addition?Cfragmentation chain transfer-based polymerization of methyl methacrylate, glycidyl methacrylate, and tert-butyl methacrylate. The grafting is achieved by the reaction of epoxy group in short PGMA segment with silanol functionality of silica. After hydrolysis of poly(tert-butyl methacrylate) segment, amphiphilic NSiO₂ with ??V-shaped?? polymer brushes possessing exact 1:1 molar ratio of different arms were prepared. The functionalized particles self-assemble at oil/water interfaces to form stable large droplets with average diameter ranging from 0.15?±?0.06 to 2.6?±?0.75?mm. The amphiphilicity of the particles can be finely tuned by changing the relative lengths of poly(methyl methacrylate) and poly(methacrylic acid) segments, resulting in different assembly behavior. The method may serve as a general way to control the surface property of the particles.     

A carbon-13 nuclear magnetic resonance study of compounds substituted by a perfluoroalkyl chain

The ¹³C NMR spectra of alkanes, alkanones and cyclohexanones substituted by perfluoroalkyl groups, R_F, have been studied. The influence of the perfluoroalkyl group on the chemical shifts of other carbons of the molecules is the same regardless of the R_F chain length.     

Preparation and applications of novel fluoroalkyl end-capped acrylamide oligomers/polythiophene nanocomposites

Thiophene monomer reacted with ferric chloride in the presence of a variety of fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomers [R_F-(DOBAA)_x-R_F] to afford nanometer size-controlled R_F-(DOBAA)_x-R_F oligomers-polythiophene composites [R_F-(DOBAA)_x-R_F/PTh]. R_F-(DOBAA)_x-R_F/PTh nanocomposites thus obtained were demonstrated to have a good dispersibility and stability in methanol to give a transparent brown solution. In addition, these fluorinated nanocomposites were applied to the surface modification of common organic polymers such as poly(methyl methacrylate), and were dispersed regularly above the polymer surface.     

Synthesis of 2-(perfluoroalkyl)ethyl potassium sulfates based on perfluorinated Grignard reagents

The first example of nucleophilic substitution with perfluoroalkyl Grignard reagents on the sp³ carbon centre is described. Thus, a series of organometals R_F-MgBr, prepared from perfluorinated alkyl iodides R_F-I with R_F = C₄F₉, C₆F₁₃, C₈F₁₇, C₁₀F₂₁ and C₁₂F₂₅, reacted with 1,3,2-dioxathiolane-2,2-dioxide to afford the corresponding 2-(perfluoroalkyl)ethyl magnesium sulfates, which were isolated after metathesis to the corresponding potassium salts. In the model reaction, perfluorohexylmagnesium iodide was reacted with methyl triflate yielding polyfluorinated alkane. The attempts to extend the reaction to 1,3,2-dioxathiane-2,2-dioxide were unsuccessful due to its inferior reactivity and only reduced polyfluoroalkane and the product of coupling were detected in the reaction mixture. Polyfluorinated sulfates are easily hydrolyzed with hydrochloric or triflic acid to the corresponding alcohols, which is an alternative to standard transformation of perfluoroalkyl iodides to 2-(perfluoroalkyl)ethanols. Quantum-chemical calculations of the PES of the reaction with both sulfur-containing heterocycles found that the failure of the reaction with 1,3,2-dioxathiane-2,2-dioxide is caused by higher activation energy of the process.     

Synthesen und Eigenschaften von Bis(perfluoralkyl)zink‐Verbindungen

Syntheses and Properties of Bis(perfluoroalkyl)zinc Compounds The conditions for the syntheses of bis(perfluoroalkyl)zinc compounds Zn(R_f)₂ · 2 D (R_f = C₂F₅, n‐C₃F₇, i‐C₃F₇, n‐C₄F₉, n‐C₆F₁₃, n‐C₇F₁₅, and n‐C₈F₁₇; D = CH₃CN, tetrahydrofurane, dimethylsulfoxide) are described. Mass spectra, thermal decompositions, ¹⁹F‐ and ¹³C‐NMR spectra are discussed.     

Synthesis,micellization properties,and cytotoxicity trends of N-hydroxyethyl-3-alkyloxypyridinium surfactants

N-hydroxyethyl-3-alkyloxypyridinium amphiphiles have been synthesized and characterized by various spectroscopic techniques. Self-assembling properties of these amphiphiles have been studied by surface tension, conductivity, and fluorescence measurements. Basic micellization parameters like critical micelle concentration (cmc), surface tension at the cmc (γ _cmc), adsorption efficiency (pC₂₀), effectiveness of surface tension reduction (Π _cmc), maximum surface excess concentration (Γ _max) and minimum surface area/molecule (A _min), and Gibbs free energy of the micellization (ΔG⁰ _mic) have also been determined. The micellization of these 3-alkyloxypyridinium halides in aqueous phase have been found to be exothermic and entropy-driven as assessed by conductivity measurements at different temperatures. Thermal degradation of these surfactants has also been assessed by thermal gravimetric analysis under nitrogen atmosphere. Further, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay of these surfactants on C6 glioma cells show them to be less toxic than conventional cationic surfactants.     

Azidoperfluoroalkanes: Synthesis and Application in Copper(I)‐Catalyzed Azide–Alkyne Cycloaddition

We report an efficient and scalable synthesis of azidotrifluoromethane (CF₃N₃) and longer perfluorocarbon‐chain analogues (R_FN₃; R_F=C₂F₅, ⁿ C₃F₇, ⁿ C₈F₁₇), which enables the direct insertion of CF₃ and perfluoroalkyl groups into triazole ring systems. The azidoperfluoroalkanes show good reactivity with terminal alkynes in copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC), giving access to rare and stable N ‐perfluoroalkyl triazoles. Azidoperfluoroalkanes are thermally stable and the efficiency of their preparation should be attractive for discovery programs.     

Synthesis and solution properties of sulfate-type hybrid surfactants with a benzene ring

Nine novel sulfate-type hybrid surfactants, C_mF_2m+1C₆H₄CH(OSO₃Na)C_nH_2n+1 (FmPHnOS: m=4, 6, 8; n=3, 5, 7; C₆H₄: p-phenylene), with a benzene ring in their molecules were synthesized. Alkanoyl chlorides were allowed to react with iodobenzene in the presence of aluminum chloride to give the corresponding aromatic ketones. The reaction of the ketones with perfluoroalkyl iodides yielded 1-[4-(perfluoroalkyl)phenyl]-1-alkanones as intermediates. The intermediates were allowed to react with methanol in tetrahydrofuran in the presence of sodium borohydride to yield 1-[4-(perfluoroalkyl)phenyl]-1-alkanols. The desired hybrid surfactants were obtained by the reaction of 1-[4-(perfluoroalkyl)phenyl-1-alkanols with sulfur trioxide/pyridine complex in pyridine and by the subsequent neutralization of the products with sodium hydroxide solution. When compared with the conventional hybrid surfactants, C_mF_2m+1C₆H₄COCH(SO₃Na)C_nH_2n+1 (FmHnS: m=4, 6; n=2, 4, 6; C₆H₄: p-phenylene), the new hybrid surfactants thus synthesized were found to have a comparable ability to lower the surface tension of water and a high hydrophilicity. The cmc of FmPHnOS obeyed Kleven’s rule and their occupied areas per molecule increased with increasing m and n with the values between 0.66 and 1.05 nm². The aggregation number for FmPHnOS micelles ranged from 6 to 45 and the hydrodynamic radius of the micelles was in the range of 1.4-3.1 nm.     

Preparation of novel fluoroalkyl end-capped oligomeric nanoparticles-encapsulated hibitane

Fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomer [R_F-(DOBAA)_n-R_F] reacted with hibitane in methanol at 90 °C to afford R_F-(DOBAA)_n-R_F oligomeric nanoparticles-encapsulated hibitane in good isolated yields. These fluorinated oligomeric particles-encapsulated hibitane were nanometer size-controlled very fine particles, and were found to exhibit a good dispersibility and stability in a wide variety of traditional organic solvents including fluorinated aliphatic solvents. Each dispersed solution with fluorinated nanoparticles afforded transparent colorless solution. These fluorinated nanoparticles were also found to exhibit a good antibacterial activity, and were applied to the surface modification of traditional organic polymers such as poly(methyl methacrylate).     

Synthesis and properties of triethylalkylammonium perfluorooctanesulfonates (APFOS)

Six ionic surfactants containing a perfluorooctanesulfonic anion and a positively charged ammonium in a molecule, R_FSO₃⁻N⁺Et₃C_nH_2n+1 (n=2, 4, 6, 8, 10 and 12), were prepared from perfluorooctanesulfonyl fluoride, triethylamine and linear alkanol. Solution properties of triethylalkylammonium perfluorooctanesulfonates (APFOS) have been measured in terms of surface tension. The values of critical micelle concentration (cmc) decrease with an increase of N-alkyl chain length, and the logarithm of the cmc decreases linearly with increasing N-alkyl chain length (n≥6), while the negative values of standard free energy for the adsorption become larger as the N-alkyl chain length increases.     

Micellar properties of alkyldimethylphenylammonium bromides in water

The synthesis and methods applied for the purification of dodecyl-, tetradecyl-, and hexadecyldimethylphenylammonium bromides are described. The results of surface tension measurements of aqueous solutions of these surfactants show that slight amounts of strongly surface-active nonionic impurities are persistent in the crystalline materials presumably due to their low thermal stability. The Critical micelle concentration (cmc) and the degree of ionization (β) of the micelles of the salts studied in aqueous solutions were determined at 25 °C from specific conductivity versus molality plots. The temperature dependence of the cmc and of β of the tetradecyl homologue was measured in the range 4–34 °C. A minimum cmc amounting to 1.20 mmol/kg was determined at about 14 °C. The values of β were found to grow linearly with temperature. From these results, the standard Gibbs energy, the enthalpy and the entropy of the process of micellization were obtained by application of the pseudo-phase-separation model. Enthalpy and entropy show a compensation effect in their contribution to the Gibbs energy. At low temperatures the process of micellization is driven mainly by the entropic term, whereas with increasing temperature the enthalpic term becomes predominant. At the temperature of the minimum cmc, the value of the enthalpy is far from being zero because of the important contribution of the (β/T)R ln X _cmc term. Received: 27 July 1998 Accepted in revised form: 15 December 1998     

Polymeric Fluorosurfactant‐Mediated Perfluorocarbon Emulsions

Polymeric fluorosurfactants, using poly(N,N‐dimethylacrylamide) (PDMA) or PDMA copolymers containing acrylic acid (AA) or 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) comonomers were synthesized by copolymerization of DMA, DMA/AA, or DMA/AMPS and methacrylates composed of 1,1‐dihydroperfluorodecanoyl groups separated from the methacrylate by polyethylene glycol (PEG) groups with molecular weights ranging from 1 to 6 kD. The stability of aqueous perfluorocarbon (PFC) emulsions mediated by these polymeric fluorosurfactants was found to be affected by polymer concentration, ionic comonomer content, perfluoroalkyl (R_F) comonomer content, and PEG spacer length. Thus, emulsion stability characterized by average particle size and morphology was improved by increased AA or AMPS content (up to 30 weight percent), increased PEG chain length and R_F comonomer content, and greater polymer concentration.     

Condensation des bromures de perfluoro-alkylmagnesium sur les aldehydes et cetone α-halogenes

Perfluoroalkyl magnesium halides react with α halogenocarbonyl compounds producing diastereoisomeric halohydrines which lead to perfluoroalkyl epoxydes by cyclisation.NMR study shows that the epoxyde configuration may be deduced from the coupling constant value ⁴J(H-F) between the epoxyde proton and the R_F radical.The condensation on the carbonyl group is less stereo-selective with R_FMgX than with usual Grignard reagents.     

Thermolyse des halogenures de perfluoroalcanesulfonyle

Perfluoroalkanesulfonyl chlorides [R_FSO₂Cl ; R_F  CF₃, C₂F₃, C₄F₉], decompose thermally to give the corresponding perfluoroalkyl chlorides with evolution of SO₂. The latter retards the reaction, but it is catalysed by copper which also inhibits the SO₂ effect. 2-methyl-2-nitrosopropane traps the perfluoroalkyl free radicals. In the presence of a perfluoroalkyl iodide [R′_FI ≠ R′_F≠R_F], other products, R_FI and R_FCl, are obtained. A free radical chain-mechanism is then suggested.On the other hand, perfluorobutanesulfonyl fluoride is very stable thermally.     

Characterization of a low-wettable surface based on perfluoroalkyl acrylate copolymers

The low-wettable surfaces based on perfluoroalkyl acrylate (FA)/n-alkyl acrylate copolymers with various amounts of FA units were presented to analyze their surface properties. The FA copolymers were prepared by soap-free emulsion polymerization in the presence of sodium 2-acrylamide-2-methyl propanesulfonate (AMPSNa) used as a reactive surfactant. Low-wettability properties resulted from the self-assembly of fluorine-containing side chains, surface density and extent of orientation of perfluoroalkyl (R_F) groups. The wetting behavior of the low-wettable surfaces was discussed from a standpoint of dynamic contact angles measurement, which implied an enrichment of perfluoroalkyl groups on the topmost surface. Increased R_F surface densities and orientation, measured by attenuated total reflectance spectra of infrared (ATR-IR), X-ray photoelectron spectroscopy (XPS) and scanning force microscopy (SFM), respectively, were consistent with higher angles.     

Solubilization and applications of single-walled carbon nanotubes into aqueous and organic media by the use of nanometer size-controlled fluoroalkyl end-capped oligomeric aggregates

We have studied on the solubilization of single-walled carbon nanotubes (SW-CNTs) into aqueous and organic media by the use of a variety of nanometer size-controlled fluorinated self-assemblies, which were formed by the aggregations of end-capped fluoroalkyl segments in fluoroalkyl end-capped acrylic acid oligomers [R_F-(ACA)_n-R_F], N,N-dimethylacrylamide oligomers [R_F-(DMAA)_n-R_F], acryloylmorpholine oligomers [R_F-(ACMO)_n-R_F], and N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomers [R_F-(DOBAA)_n-R_F]. Fluorinated self assemblies formed in organic media (colorless solutions) could solubilize SW-CNTs into organic media to afford the transparent pale yellow solutions. The dynamic light scattering measurements showed that the size of fluorinated self-assemblies increased after the solubilization of SW-CNTs into organic media. It was suggested that the solubilization of SW-CNTs into organic media is due to the encapsulation of SW-CNTs into fluorinated assemblies. Fluorinated assemblies were also able to solubilize SW-CNTs into water to give the transparent gray solutions. Among a variety of fluorinated assemblies, fluorinated assemblies formed by R_F-(ACMO)_n-R_F [R_F = CF(CF₃)OC₆F₁₃] oligomer was more effective for the solubilization of SW-CNTs into both aqueous and organic media. Contact angle measurements of dodecane and the fluorescence spectra for poly(methyl methacrylate) cast film modified by fluorinated self-assemblies—SW-CNTs complexes showed that SW-CNTs are dispersed above the PMMA surface.