Surface properties of a series of amphiphilic dendrimers with short hydrophobic chains

A series of tree-shaped, amphiphilic dendrimers was synthesized. The products belong to the family of one-directional arborols of the form ([9]-n), where the notation signifies that each molecule has nine hydroxyl groups ([9]-) as the hydrophilic head and an alkyl chain as the hydrophobic moiety (n = 6, 8, or 10 carbon atoms). The surfactant character changes dramatically as the number of methylene groups increases. The critical micelle concentration of [9]-6 was determined, and pressure-area isotherms of the less soluble [9]-8 and [9]-10 were obtained. Large structures existed atop the spread layers. Large structures were also found in solutions of [9]-6.     

Solvent-tunable binding of hydrophilic and hydrophobic guests by amphiphilic molecular baskets

[reaction: see text] Responsive amphiphilic molecular baskets were obtained by attaching four facially amphiphilic cholate groups to a tetraaminocalixarene scaffold. Their binding properties can be switched by solvent changes. In nonpolar solvents, the molecules utilize the hydrophilic faces of the cholates to bind hydrophilic molecules such as glucose derivatives. In polar solvents, the molecules employ the hydrophobic faces of the cholates to bind hydrophobic guests. A water-soluble basket can bind polycyclic aromatic hydrocarbons including anthracene, pyrene, and perylene. The binding free energy (-deltaG) ranges from 5 to 8 kcal/mol and is directly proportional to the surface area of the aromatic hosts. Binding of both hydrophilic and hydrophobic guests is driven by solvophobic interactions.     

Synthesis and aqueous aggregation properties of amphiphilic surface-block dendrimers

[reaction: see text] A family of dendritic amphiphiles were synthesized from the natural metabolites of glycerol, succinic acid, and myristic acid. The surfaces of these dendrimers display different numbers of alkyl chains and carboxylic acids, varying the hydrophobic-to-hydrophilic ratio over a relatively broad range. In solution these dendritic amphiphiles form supramolecular structures, and these aggregates have been characterized by light microscopy, transmission electron microscopy, and tensiometry. These aggregates can entrap the hydrophobic species pyrene.     

Synthesis and characterization of biodegradable network hydrogels having both hydrophobic and hydrophilic components with controlled swelling behavior

A new class of biodegradable hydrogels, consisting of hydrophobic poly(D ,L )lactic acid (PDLLA) and hydrophilic dextran segments with a polymer network structure, was synthesized with UV photopolymerization. Unsaturated vinyl groups first were introduced onto the PDLLA and dextran polymer backbones, then followed by a crosslinking reaction of diacrylate-terminated PDLLA and dextran acrylate. The chemical crosslinking forced the hydrophobic PDLLA and hydrophilic dextran segments to mix with each other in the network hydrogels. The new polymers were characterized by standard polymer characterization methods such as NMR, Fourier transform infrared spectroscopy, and gel permeation chromatography. The effects of reaction time, temperature, and molar ratio of the reactants on the incorporation of acrylate onto the polymer backbone were examined. A series of hydrogels with different dextran/PDLLA composition ratios was prepared, and their swelling behaviors were studied. These new bicomponent network hydrogels had a wide range of hydrophilicity to hydrophobicity that was difficult to achieve in totally hydrophilic hydrogels. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4554–4569, 1999     

Preparation of amphiphilic diblock copolymers with pendant hydrophilic phosphorylcholine and hydrophobic dendron groups and their self‐association behavior in water

Generation 3.5 poly(amido amine) dendron (G3.5) with 16 n‐butyl terminal groups containing an acrylamide monomer (AaUG3.5) was prepared by condensation between an amino focal group in G3.5 and 11‐acrylamidoundecanoic acid. AaUG3.5 was polymerized using poly(2‐methacryloyloxyethyl phosphorylcholine) (pMPC)‐based macro‐chain transfer agent via reversible addition‐fragmentation chain transfer (RAFT) radical polymerization to obtain amphiphilic diblock copolymers with different compositions. The diblock copolymers (P_mD_n) were composed of a hydrophilic pMPC block and hydrophobic pendant dendron‐bearing block, where P and D represent pMPC and pAaUG3.5, respectively, and m and n represent the degree of polymerization for each block, respectively. P₂₉₆D₁ and P₉₈D₃ formed vesicles and large compound micelles and vesicles, respectively, which was confirmed by light scattering measurements and transmission electron microscopic (TEM) observations. The large compound micelles formed from P₉₈D₃ could not incorporate hydrophilic guest polymer molecules, because the aggregates did not have a hydrophilic hollow core. In contrast, the vesicles formed from P₂₆₉D₁ could incorporate hydrophilic guest polymer molecules into the hollow core. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4923–4931     

Functional colloidal particles stabilized by layered silicate with hydrophilic face and hydrophobic polymer brushes

In this study, we describe a new strategy for producing narrowly dispersed functional colloidal particles stabilized by a nanocomposite with hydrophilic clay faces and hydrophobic polystyrene (PS) brushes on the edges. This method involves preparation of polymer brushes on the edges of clay layers and Pickering suspension polymerization of styrene in the presence of the nanocomposites. PS brushes on the edges of clay layers were prepared by atom transfer radical polymerization. X‐ray diffraction and thermogravimetric analysis results indicated that PS chains were grafted to the edges of clay platelets. Transmission electron microscope results showed that different morphologies of clay‐PS particles could be obtained in different solvents. In water, clay‐PS particles aggregated together, in which PS chains collapsed forming nanosized hydrophobic domains and hydrophilic clay faces stayed in aqueous phase. In toluene, clay‐PS particles formed face‐to‐face structure. Narrowly dispersed PS colloidal particles stabilized by clay‐PS were prepared by suspension polymerization. Because of the negatively charged clay particles on the surface, the zeta potential of the PS colloidal particles was negative. Positively charged poly(2‐vinyl pyridine) (P2VP) chains were adsorbed to the surface of PS colloidal particles in aqueous solution at a low pH value, and gold nanoparticles were prepared in P2VP brushes. Such colloidal particles may find important applications in a variety of fields including waterborne adhesives, paints, catalysis of chemical reactions, and protein separation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1535–1543, 2009     

Synthesis, aggregation, and chiroptical properties of chiral, amphiphilic dendrimers

The syntheses of amphiphilic dendrimers based on 3,5-dihydroxybenzyl alcohol containing tri- or tetrafunctional chiral central cores and allyl ester termini are described. Water solubility is imparted to the dendrimers via a palladium-catalyzed deprotection of the peripheral allyl esters. This method affords complete deprotection of the carboxylate surface because, in contrast to the basic hydrolysis of methyl ester termini, the solubility of partially hydrolyzed intermediates is maintained throughout the course of the deprotection, thereby avoiding precipitation during the reaction. Chiroptical analysis indicates that the structure of the dendrimers collapses in water, resulting in an increased steric effect upon the central core that is manifested by lower optical rotatory power. However, contributions to the chiroptical properties from the dendron branch segments were not evident in water or organic media, suggesting that chiral substructures were not developing in the branch segments of the dendrimers. Multiangle light scattering studies revealed that the dendrimers experienced significant aggregation in aqueous media that decreased at higher generations. This behavior could be rationalized by a change in conformational preference from a disklike conformation at low generations to a more globular conformation at higher generations.     

Mixed micelles based on cationic and anionic amphiphilic diblock copolymers containing identical hydrophobic blocks

Through the use of the methods of turbidimetry, UV spectrophotometry, fluorescence spectroscopy, dynamic light scattering, and ultracentrifugation, micelle formation is studied for cationic (polysty-rene-poly-N-ethyl-4-vinylpyridium bromide) and anionic (polystyrene-sodium polyacrylate) diblock copolymers containing identical polystyrene blocks in dilute aqueous saline solutions. Mixing of aqueous dispersions of individual micelles is accompanied by the formation of only insoluble products, which likely are intermicellar interpolyelectrolyte complexes. At the same time, mixing of diblock copolymers in a nonselective solvent and its subsequent gradient replacement with water during suppressed interpolyelectrolyte interactions yields mixed diblock copolymer micelles, which are found to be dispersionally stable in an excess of charged units of any polymer component. The micelles are composed of an insoluble polystyrene core and a mixed interpolyelectrolyte corona, and their hydrodynamic characteristics are controlled by the ratio of charged units in the mixed diblock copolymers. The mixed micelles are found to be able to interact with the macromolecules of a homopolyelectrolyte, sodium poly(styrene sulfonate), in aqueous solutions and form ternary complexes. In this case, depending on the composition of the mixed micelles, ternary complexes can be dispersionally stable or can aggregate and precipitate.     

A starlike amphiphilic graft copolymer with hydrophilic poly(acrylic acid) backbones and hydrophobic polystyrene side chains

A well‐defined starlike amphiphilic graft copolymer bearing hydrophilic poly(acrylic acid) backbones and hydrophobic polystyrene side chains was synthesized by successive atom transfer radical polymerization followed by the hydrolysis of poly‐(methoxymethyl acrylate) backbone. A grafting‐from strategy was employed for the synthesis of a graft copolymer with narrow molecular weight distribution. Hydrophobic polystyrene side chains were connected to the backbones through stable C? C bonds. The poly(methoxymethyl acrylate) backbones can be easily hydrolyzed with HCl without affecting the hydrophobic polystyrene side chains. This kind of amphiphilic graft copolymer can form stable sphere micelles in water. The sizes of the micelles were dependent on the ionic strength and pH value. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3687–3697, 2007     

Interfacial behavior of cubic liquid crystalline nanoparticles at hydrophilic and hydrophobic surfaces

The adsorption behavior of self-assembled lipid liquid crystalline nanoparticles at different model surfaces was investigated in situ by use of ellipsometry. The technique allows time-resolved monitoring of the adsorbed amount and layer thickness under transient and steady-state conditions. The system under study was cubic-phase nanoparticle (CPNP) dispersions of glycerol monooleate stabilized by a nonionic block copolymer, Pluronic F-127. Depending on the surface properties and presence of electrolytes, different adsorption scenarios were discerned: At hydrophilic silica thick surface layers of CPNPs are generated by particle adsorption from dispersions containing added electrolyte, but no adsorption is observed in pure water. Adsorption at the hydrophobic surface involves extensive structural relaxation and formation, which is not electrolyte sensitive, of a classic monolayer structure. The different observations are rationalized in terms of differences in interactions among the CPNP aggregates, their unimer constituents, and the surface and show a strong influence of interfacial interactions on structure formation. Surface self-assembly structures with properties similar to those of the corresponding bulk aggregates appear exclusively in the weak interaction limit. This observation is in agreement with observations for surfactant self-assembly systems, and our findings indicate that this behavior is applicable also to complex self-assembly structures such as the CPNP structures discussed herein.     

Water interaction with hydrophobic and hydrophilic soot particles

The interaction of water with laboratory soots possessing a range of properties relevant for atmospheric studies is examined by two complementary methods: gravimetrical measurement of water uptake coupled with chemical composition and porosity analysis and HTDMA (humidified tandem differential mobility analyzer) inference of water uptake accompanied by separate TEM (transmission electron microscopy) analysis of single particles. The first method clarifies the mechanism of water uptake for bulk soot and allows the classification of soot with respect to its hygroscopicity. The second method highlights the dependence of the soot aerosol growth factor on relative humidity (RH) for quasi-monodisperse particles. Hydrophobic and hydrophilic soot are qualitatively defined by their water uptake and surface polarity: laboratory soot particles are thus classified from very hydrophobic to very hydrophilic. Thermal soot particles produced from natural gas combustion are classified as hydrophobic with a surface of low polarity since water is found to cover only half of the surface. Graphitized thermal soot particles are proposed for comparison as extremely hydrophobic and of very low surface polarity. Soot particles produced from laboratory flame of TC1 aviation kerosene are less hydrophobic, with their entire surface being available for statistical monolayer water coverage at RH approximately 10%. Porosity measurements suggest that, initially, much of this surface water resides within micropores. Consequently, the growth factor increase of these particles to 1.07 at RH > 80% is attributed to irreversible swelling that accompanies water uptake. Hysteresis of adsorption/desorption cycles strongly supports this conclusion. In contrast, aircraft engine soot, produced from burning TC1 kerosene in a gas turbine engine combustor, has an extremely hydrophilic surface of high polarity. Due to the presence of water soluble organic and inorganic material it can be covered by many water layers even below water saturation conditions. This soot demonstrates a gradual diameter growth factor (D(wet)/D(dry)) increase up to 1.22 at 93% relative humidity, most likely due to the presence of single particles with water soluble material heterogeneously distributed over their surface.     

Nanosecond imaging of microboiling behavior on pulsed-heated au films modified with hydrophilic and hydrophobic self-assembled monolayers

Fast transient microboiling has been characterized on modified gold microheaters using a novel laser strobe microscopy technique. Microheater surfaces of different hydrophobicity were prepared using self-assembled monolayers of hexadecane thiol (hydrophobic) and 16-mercaptohexadecanol (hydrophilic) as well as the naturally hydrophilic bare gold surface. The microheater was immersed in a pool of water, and a 5-micros voltage pulse to the heater was applied, causing superheating of the water and nucleation of a vapor bubble on the heater surface. Light from a pulsed Nd:Yag laser was configured to illuminate and image the sample through a microscope assembly. The timing of the short duration (7.5 ns) laser flash was varied with respect to the voltage pulse applied to the heater to create a series of images illuminated by the flash of the laser. These images were correlated with the transient resistance change of the heater both during and after the voltage pulse. It was found that hydrophobic surfaces produced a bubble that nucleated at an earlier time, grew more slowly to a smaller maximum size, and collapsed more rapidly than bubbles formed on hydrophilic surfaces.     

Synthesis and solution behavior of carbon nanotubes decorated with amphiphilic block polyelectrolytes

The aqueous solubilization of carbon nanotubes (CNTs) with the aid of a block copolymer possessing one polyelectrolyte block (namely polystyrene-b-sodium (sulfamate/carboxylate polyisoprene)) is reported. The solubilization protocol, based on the co-dissolution of the copolymer and the CNTs, leads to the formation of supramolecular assemblies on the side walls of the tubes. Electron microscopy as well as infrared spectroscopy and thermogravimetric analysis were employed as meaningful probes to identify the adsorption of the polymer onto the surface of CNTs and the composition of the final hybrid material. Viscosity measurements on solutions of the copolymer decorated CNTs indicate that the polyelectrolyte effect, which is observed in the case of net polymers, is preserved in a lesser extent in the case of the copolymer/CNTs dispersions.     

Self-assembly of facially amphiphilic dendrimers on surfaces

Facially amphiphilic dendrimers have been shown to provide significant difference in surface behavior due to subtle changes in structure. The monodendrons are capable of providing hydrophobic surfaces, while the didendrons provide superhydrophobic surfaces. This provides an example of how a molecular level change could result in significant changes in surface behavior. This difference is attributed to the conformational differences exhibited by these dendrimers on surfaces.     

Synthesis and characterization of random hydrophilic/hydrophobic copolymers of styrene and D-lactose-O-vinylbenzylhydroxime

D -Lactose-O-(vinylbenzyl)oxime (LVO), prepared from α-D -lactose and [O-(vinylbenzyl)oxy]amine ( 1 ) was copolymerized with styrene (ST) in dimethylsulfoxide (DMSO)-toluene (1 : 1, v/v) at 65°C using 2,2′-azobisisobutyronitrile (AIBN) as a free radical initiator. The polymerization was rapid when using AIBN as the initiator. The resultant copolymers were characterized by elemental analyses, infrared, viscometry, TGA, DSC, and ¹H-NMR spectroscopy. The poly(ST-co-LVO) had an intrinsic viscosity in the range of 0.11–0.51 dL/g in DMSO at 30°C. The molecular weight was determined by gel permeation chromatography (GPC), and the molecular weight of the resulting polymers ranged from 2.11 × 10⁴ to 6.53 × 10⁷ with low polydispersities. The solubility of the copolymers with different monomer compositions in solvents of varied polarities was also studied. Incorporation of up to 65% (mol %) of lactose-based monomer onto polystyrene backbone led to a water-soluble polymer. Thermal behavior of the synthesized copolymers was evaluated by thermogravimetric analysis (TGA) and correlated very well with the polymer composition. Introduction of a pendant disaccharide compromised the thermal stability of the copolymer. The synthetic approach described in this report provides a route to prepare a novel disaccharide surfactant polymer with well-defined structures and hydrophilic/hydrophobic balances, by adjusting feed ratio of the lactose-based monomer ( 1 ) to styrene. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2971–2978, 1998     

Synthesis and thermal behavior of Janus dendrimers,part 1

Eight Janus-type dendrimers up to the second generation were synthesized, and their thermal properties were evaluated. Compounds consist of the dendritic bisMPA based polyester moieties, and either 3,4-dihexyloxybenzoic acid or 3,4-dihexadecyloxybenzoic acid moieties, attached to opposite sides of the pentaerythritol core. The structures of the molecules were verified with ¹H NMR, ¹³C NMR, ESI TOF mass spectrometry and elemental analysis. The thermal stability was evaluated by thermogravimetric analysis, displaying onset decomposition temperatures (T_d) ranging from 241 to 308 °C. Phase transitions were studied by differential scanning calorimetry. Based on the performed studies it was confirmed that OH terminated dendrimers 2, 4, 6 and 8 exhibited liquid crystalline phases. Also, the X-ray powder diffraction measurements were accomplished for the dendrimers having terminal hydroxyl groups.     

Synthesis and thermal behavior of Janus dendrimers,part 2

The thermal properties of twelve Janus-type dendrimers up to the second generation were evaluated by termogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Compounds consist of the dendritic bisMPA based polyester moieties, and either 3,4-bis-dodecyloxybenzoic acid, 3,5-bis-dodecyloxybenzoic acid or 3,4,5-tris-dodecyloxybenzoic acid moieties, attached to opposite sides of the pentaerythritol core. The thermal stability of the compounds was evaluated by TGA, displaying onset decomposition temperatures (T_d) at around 250 °C. DSC measurements upon heating and cooling confirmed that OH terminated Janus dendrimers featuring large polarity difference in opposite sides display liquid crystalline phases with exception of 3,5-type G1 dendrimer; while acetonide terminated dendrimers displayed merely melting transitions. Dendrimers having terminal alkyl chains at positions 3,4 or 3,4,5 in aromatic moieties exhibited enantiotropic mesophases. However, the thermal behavior of the dendrimers with 3,5-substitution pattern was different: the 3,5-type G1 dendrimer exhibit a lack of mesomorphic transition, and in the case of the 3,5-type G2 dendrimer, the mesophase was absent in the first heating scan but was observed during the subsequent cooling and heating scans at the rate of 10 °C/min.     

Diphilic carbosilane dendrimers with different densities of the hydrophilic layer

A universal method for the synthesis of hydrophilic dendrimers was considered. The method is based on a combination of carbosilane dendrimers with different molecular organizations and hydrophilizing agents, viz., substituted hydride silanes containing one and three protected hydroxyl groups. The combination of a limited set of the mentioned reagents makes it possible to control the ratio of hydrophilic and hydrophobic moieties of the molecular structure in wide limits. A simple and convenient method for the removal of trimethylsilyl protection of hydroxyl groups in the surface layer of dendrimers was developed.