Acidity and Catalytic Activity of Sulfate Modified Mixed Oxides of Tin and Praseodymium

A comparitive study of the acid-base properties and physico-chemical characteristics of pure SnO₂, sulfated SnO₂ and sulfated binary oxides of Sn and Pr was done. The data were correlated with the catalytic activity of the oxides towards benzoylation of toluene.     

Simple but efficient synthesis of novel substituted benzimidazoles over ZrO2-Al2O3

Solid-acid catalytic materials such as ZrO₂-Al₂O₃ containing 80?mol% of ZrO₂ were prepared by the solution combustion method (SCM) using different fuels such as urea, hexamethylene tetramine, glycine, and sucrose. All the prepared solid acid catalytic materials were characterized for their physico-chemical properties like crystalinity, acidity, functionality and morphology. These materials were evaluated for their catalytic activity in the synthesis of a series of novel substituted benzimidazoles. The reaction conditions were optimized by varying the solvents, reaction temperature, weight of solid acid catalyst, molar ratio of the reactants, and reaction time. The ZrO₂-Al₂O₃ solid acid catalytic material prepared by urea as a fuel was found to be highly active, recyclable, and reusable in the synthesis of benzimidazoles. A possible reaction mechanism for the synthesis of benzimidazoles is also proposed.     

Effects of the preparation methods on the properties of Ni-La2O3-SiO2 catalysts for m -dinitrobenzene hydrogenation

Ni-La₂O₃-SiO₂ catalysts were prepared by wetness impregnation and sol-gel method followed by conventional drying and supercritical drying, respectively. Their physico-chemical properties and activity for the hydrogenation of m-dinitrobenzene to m-phenylenediamine were investigated by BET, XRD, TPR, H₂-TPD and activity tests. The results showed that the structural and catalytic properties of the Ni-La₂O₃-SiO₂ catalysts obviously depended on the preparation method and the drying mode. The catalyst prepared by the sol-gel method in combination with conventional drying exhibited the highest catalytic activity among the catalysts tested, attributable to its well-dispersed nickel particles and larger active nickel surface area.     

Enhancement of the catalytic performances and lifetime of Ni/γ-Al2O3 catalysts for the steam toluene reforming via the combination of dopants: inspection of Cu,Co, Fe,Mn, and Mo species addition

In this work, the influence of metallic dopant addition in 10 wt % Ni/γ-Al₂O₃ catalyst on the material physico-chemical properties and catalytic activity for the toluene steam reforming was studied. Seventeen doped Ni/γ-Al₂O₃ catalysts were synthesized by the sol–gel process. The aim of this study was to determine which elements were the most suitable for the doping of 10 wt % Ni/γ-Al₂O₃ catalysts. The influence of the dopants was studied through different physico-chemical techniques. It appeared that some dopants showed lower catalytic performances due to high carbon deactivation. On the contrary, some dopants increased the resistance to coking while also improving the catalytic activity. Different mechanisms were proposed to explain these modifications of catalytic behavior. Among all doped Ni/γ-Al₂O₃ catalysts, the samples that combined Mn + Mo or Co + Mo dopants showed the best catalytic performances at 650 °C. Both samples showed high toluene reforming activity and low amounts of carbon deposit.     

Effect of Ag-doping of nanosized FeMgO system on its structural, surface, spectral, and catalytic properties

The effects of Ag-doping on the physico-chemical, spectral, surface, and catalytic properties of the FeMgO system with various Fe₂O₃ loadings were investigated. The dopant (Ag) molar ratio varied between 0.01 % and 0.05 %. The techniques employed for characterisation of catalysts were TG/DTG, XRD, ESR, N₂ adsorption at ?196°C, and catalytic decomposition of H₂O₂ at 25?C35°C. The results obtained revealed that the investigated catalysts consisted of nanosized MgO as the major phase, apart from the MgFe₂O₄ and/or Fe₃O₄ phases. ESR result of the FeMgO system revealed the presence of paramagnetic species as a result of Ag-doping. The textural properties including SBET, porosity and St were modified by Ag-doping. The doping process with Ag-species improved the catalytic activity of the FeMgO system. Increasing the calcination temperature from 400°C to 800°C increased the catalytic activity (k*_{30 °C}) of 0.05 AgFeMgO in H₂O₂ decomposition by 21.2 times.     

Heterotrinuclear manganese(II) and vanadium(IV) Schiff base complexes as epoxidation catalysts

The catalytic epoxidation of styrene using urea-hydrogen peroxide and heterotrinuclear Cu(II) complexes with general formula (ML ⁿ )₂Cu(acac)₂, where n = 1–3 and M = VO²⁺ or Mn²⁺ is reported. Schiff base complexes ML ⁿ involving a 3,4-diaminopyridine bridge with free coordination site were used as the ligand, where (Lⁿ)²⁻ is [(5-x-Sal)₂Py]² and x = H, Br or NO₂. The complexes were characterized by physico-chemical and spectroscopic methods. The electrochemical properties of M were modified upon trinuclear complex formation. The trinuclear complexes show high catalytic activity, with up to 86% conversion and 93% selectivity, while no catalytic properties were observed for the monomeric complexes. The catalyst could be reused with some loss of activity.     

Catalytic properties of nickel–yttrium mixed oxides and the influence of ionizing radiation

Some physico-chemical and catalytic properties of NiO–Y₂O₃ cataysts containing various amounts of components in the range 0–100 wt% of one component have been studied before and after 1 MGy gamma or accelerated electron irradiation in air or in water using the hydrogen peroxide decomposition as a test reaction. Both kinds of irradiation led only to a change in surface oxidative ability but did not lead to modification of the catalytic activity of the catalysts. The reduction of the catalysts led to a creation of new kind of catalytic sites.     

Studies on Indian Ocean Manganese Nodules: XI. Physicochemical Characterization and Catalytic Activity of Silver Oxide Mixed Manganese Nodules

The promoting effect of Ag₂O on the physicochemical properties and catalytic activity of manganese nodules has been investigated. The surface area and surface oxygen increased with addition of Ag₂O, reaching a maximum at 1 mol% of Ag, and then decreased with further addition of Ag₂O. The catalytic activity of manganese nodules substantially increased with addition of Ag₂O over a wide range (0.25–25 mol% Ag). Addition of only 0.25 mol% of Ag to the nodule decreased the temperature of complete CO oxidation from 350°C to as low as 100°C. This enhanced activity was explained by the concerted action of Ag and Mn, where CO was preferentially adsorbed on Ag₂O and oxidized. The reduced Ag was then reoxidized rapidly by oxygen transferred from Mn. The promoting effect of Ag₂O on H₂O₂decomposition and ketonization of acetic acid, however, was less pronounced.     

An active phase transformation on surface of Ni-Au/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst during partial oxidation of methane to synthesis gas

It was studied the influence of gold addition on physico-chemical properties and catalytic activity of bimetallic Ni-Au/Al₂O₃ catalyst in partial oxidation of methane (POM). The reduction behavior in hydrogen, XRD crystal structure, XPS spectra and POM catalytic activity were investigated. The reduction of Ni-Au catalyst is a prerequisite condition to catalyze POM reaction. The formation of Ni-Au alloy during high temperature reduction in hydrogen and also in the conditions of POM reaction was experimentally proved. The addition of gold to Ni/Al₂O₃ system improves catalyst stability and activity in POM reaction.     

Ni-Mo氮化物催化剂:合成及其丙烷氨氧化催化性能简

分别采用溶胶-凝胶法、旋转蒸发微波干燥法、共沉淀法、浸渍法和机械混合法制备Ni-Mo氧化物前驱体. 以H₂和N₂的混合气为氮化气体,采用程序升温氮化法合成了镍钼氮化物催化剂. 利用X射线衍射、总氮含量分析、X射线光电子能谱及H₂程序升温还原对Ni-Mo氧化物前体及氮化物催化剂进行了表征. 将上述Ni-Mo氮化物催化剂用于丙烷氨氧化反应中. 结果表明,Ni-Mo氧化物前驱体的制备方法影响其氮化物催化剂上丙烷氨氧化反应性能. Ni-Mo氮化物催化剂中氮物种的移动性及反应性对产物丙烯腈选择性的影响较大,共沉淀法制备的催化剂存在大量的活性氮物种,因而具有良好的催化丙烷氨氧化反应活性.