Influence of magnetic forces on electrochemical mass transport

Enhancements of the order of 100% in the mass transport limited current for electrodeposition have been observed in magnetic fields of order 1 T. The effect of the field is to induce convection in the solution and it is equivalent to rotating the electrode or stirring the solution. In this communication, a quantitative comparison is made of the magnitude of various body forces which have been proposed to account for the experimentally observed effects, with a view to identifying the likely source of the field enhancement. When the magnetic field is uniform, the Lorentz force and the electrokinetic force both contribute significantly to the field enhancement.     

Quantitative and morphological analysis of biofilm formation on self-assembled monolayers

In spite of intensive studies over the past two decades, the influence of surface properties on bacterial adhesion and biofilm formation remains unclear, particularly on late steps. In order to contribute to the elucidation of this point, we compared the impact of two different substrates on the formation of bacterial biofilm, by analysing bacterial amount and biofilm structure on hydrophilic and hydrophobic surfaces. The surfaces were constituted by NH₂- and CH₃-terminated self-assembled monolayers (SAMs) on silicon wafers, allowing to consider only the surface chemistry influence because wafers low roughness. A strain of Escherichia coli K12, able to produce biofilm on abiotic surfaces, was grown with culture durations varying from 4 h to 336 h on both types of substrates. The amount of adhered bacteria was determined after detachment by both photometry at 630 nm and direct counting under light microscope, while the spatial distribution of adhered bacteria was observed by fluorescence microscopy. A general view of our results suggests a little influence of the surface chemistry on adherent bacteria amount, but a clear impact on dynamics of biofilm growth as well as on biofilm structure. This work points out how surface chemistry of substrates can influence the bacterial adhesion and the biofilm formation.     

Study of biofilm formation by total-reflection X-ray fluorescence spectrometry

A total reflection X-ray fluorescence spectrometric method was developed for elemental analysis of natural biofilms grown on polycarbonate substrates in the Lake Velence. For the duration of 9 weeks long growing period, two substrates were removed weekly from the lake and investigated by analytical and algological methods. The total biomass production achieved its highest value after 7 weeks. Ca, Sr and Ti, as well as Fe, Mn, K and Zn showed their maximum concentrations in the biofilms after 5 and 6-7 weeks, respectively. The enrichment factors of the 6 weeks old biofilm for the detected seven elements amounted to 10³-10⁴. The recommended colonization time for biomonitoring of the Lake Velence is 6 weeks applying polycarbonate substrates.     

Influence of molecular environment on the analysis of phospholipids by time-of-flight secondary ion mass spectrometry

Understanding the influence of molecular environment on phospholipids is important in time-of-flight secondary ion mass spectrometry (TOF-SIMS) studies of complex systems such as cellular membranes. Varying the molecular environment of model membrane Langmuir-Blodgett (LB) films is shown to affect the TOF-SIMS signal of the phospholipids in the films. The molecular environment of a LB film of dipalmitoylphosphatidylcholine (DPPC) is changed by varying the film density, varying the sample substrate, and the addition of cholesterol. An increase in film density results in a decrease in the headgroup fragment ion signal at a mass-to-charge ratio of 184 (phosphocholine). Varying the sample substrate increases the secondary ion yield of phosphocholine as does the addition of proton-donating molecules such as cholesterol to the DPPC LB film. Switching from a model system of DPPC and cholesterol to one of dipalmitoylphosphatidylethanolamine (DPPE) and cholesterol demonstrates the ability of cholesterol to also mask the phospholipid headgroup ion signal. TOF-SIMS studies of simplistic phospholipid LB model membrane systems demonstrate the potential use of these systems in TOF-SIMS analysis of cells.     

Silver nanoparticles impede the biofilm formation by Pseudomonas aeruginosa and Staphylococcus epidermidis

Biofilms are ensued due to bacteria that attach to surfaces and aggregate in a hydrated polymeric matrix. Formation of these sessile communities and their inherent resistance to anti-microbial agents are the source of many relentless and chronic bacterial infections. Such biofilms are responsible play a major role in development of ocular related infectious diseases in human namely microbial keratitis. Different approaches have been used for preventing biofilm related infections in health care settings. Many of these methods have their own demerits that include chemical based complications; emergent antibiotic resistant strains, etc. silver nanoparticles are renowned for their influential anti-microbial activity. Hence the present study over the biologically synthesized silver nanoparticles, exhibited a potential anti-biofilm activity that was tested in vitro on biofilms formed by Pseudomonas aeruginosa and Staphylococcus epidermidis during 24-h treatment. Treating these organisms with silver nanoparticles resulted in more than 95% inhibition in biofilm formation. The inhibition was known to be invariable of the species tested. As a result this study demonstrates the futuristic application of silver nanoparticles in treating microbial keratitis based on its potential anti-biofilm activity.     

Influence of interface structure on mass transport in phase boundaries between different ionic materials

Abstract  Internal and external interfaces in solids exhibit completely different transport properties compared to the bulk. Transport parallel to grain or phase boundaries is usually strongly enhanced. Transport perpendicular to an interface is usually blocked, i.e., transport across an interface is often much slower. Due to the high density of interfaces in modern micro- and nanoscaled devices, a severe influence on the total transport properties can be expected. In contrast to diffusion in metal grain boundaries, transport phenomena in boundaries of ionic materials are still less understood. The specific transport properties along metal grain boundaries are explained by structural factors like packing densities or dislocation densities in the interface region. In most studies dealing with ionic materials, the interfacial transport properties are merely explained by the influence of space charge regions. In this study the influence of the interface structure on the interfacial transport properties of ionic materials is discussed in analogy to metallic materials. A qualitative model based on the density of misfit dislocations and on interfacial strain is introduced for (untilted and untwisted) phase boundaries. For experimental verification, the interfacial ionic conductivity of different multilayer systems consisting of stabilised ZrO₂ and an insulating oxide is investigated as a funtion of structural mismatch. As predicted by the model, the interfacial conductivity increases when the lattice mismatch is increased. Graphical abstract  

Numerical analysis of the thermal effect on electroosmotic flow and electrokinetic mass transport in microchannels

Joule heating is present in electrokinetically driven flow and mass transport in microfluidic systems. Nowadays, there is a trend of replacing costly glass-based microfluidic systems by the disposable, cheap polymer-based microfluidic systems. Due to poor thermal conductivity of polymer materials, the thermal management of the polymer-based microfluidic systems may become a problem. In this study, numerical analysis is presented for transient temperature development due to Joule heating and its effect on the electroosmotic flow (EOF) and mass species transport in microchannels. The proposed model includes the coupling Poisson-Boltzmann (P-B) equation, the modified Navier-Stokes (N-S) equations, the conjugate energy equation, and the mass species transport equation. The results show that the time development for both the electroosmotic flow field and the Joule heating induced temperature field are less than 1 s. The Joule heating induced temperature field is strongly dependent on channel size, electrolyte concentration, and applied electric field strength. The simulations reveal that the presence of the Joule heating can result in significantly different characteristics of the electroosmotic flow and electrokinetic mass transport in microchannels.     

Effects of disordered hemispherical micropatterns on Staphylococcus epidermidis biofilm formation

Surfaces which have physical patterns in the scale of bacteria cells have been shown to influence the microorganism's adhesion and biofilm formation characteristics. Layer-by-layer self-assembly was utilized to create disordered hemispherical patterns on poly(dimethylsiloxane) with a feature size of 0.5 μm, 1.0 μm and 2.0 μm. The effects of pattern size on the retention and biofilm formation of Staphylococcus epidermidis were examined as a function of culture time. The 1.0 μm pattern significantly reduced biofilm surface coverage by ～30% after 5 h of culture in comparison to that on an unpatterned surface while the effect of the 0.5 and 2.0 μm patterns was negligible. On the 1.0 μm surface, bacteria initially adhered on the unpatterned areas of the disordered surface and subsequently developed into biofilms by spreading across the unpatterned areas while avoiding those covered by the pattern. The results suggest that the size of surface patterns is an important factor in altering bacteria adhesion and biofilm formation characteristics.     

Influence of biomass on hydrodynamics of an internal loop airlift reactor

The effect of the biomass presence on the overall circulation velocity, the linear velocities both in the riser and the downcomer and the overall gas hold-up was studied in a three-phase internal loop airlift reactor (ILALR). The measured data were compared with those obtained using a two-phase system (air—water). All experiments were carried out in a 40 dm³ ILALR at six different biomass concentrations (ranging from 0 g dm⁻³ to 7.5 g dm⁻³), at a temperature of 30°C, under atmospheric pressure. Air and water were used as the gas and liquid model media, respectively. Pellets of Aspergillus niger produced during the fermentation of glucose to gluconic acid in the ILALR were considered solid phase. In addition, liquid velocities were measured during the fermentation of glucose to gluconic acid using Aspergillus niger. All measurements were performed in a bubble circulation regime. At given experimental conditions the effect of the biomass on the circulation velocities in the ILALR was negligible. However, increasing of the biomass concentration led to lower values of the total gas hold-up. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Influence of spark generator parameters in the analysis of graphite electrodes by spark source mass spectrometry

Spark source mass spectrometric analyses of doped carbon samples were performed at different pulse lengths, pulse frequencies and breakdown voltages. The pulse length and pulse frequencies had no influence on the analysis. The relation between breakdown voltage, spark gap and sample matrix was determined. With increasing breakdown voltage, the abundance of the multiply charged ions was found to decrease, whereas the abundance of the cluster ions increased. The breakdown voltage was also found to affect the absolute and relative intensities of different elements in different manners. Interpretation of these results led to some new considerations on the phenomena in a spark discharge.     

Heat of formation for the propanoyl cation by photoionization mass spectrometry

The ionization energies and [C₃H₅O]⁺ appearance energies for a series of oxygenated organic compounds have been measured by dissociative photoionization mass spectrometry. The adiabatic ionization energy for cyclopentanol is observed to be 9.72 eV. A 298 K heat of formation of 591.2±2.3kJ mol^?1, based on the stationary electron convention, is derived for the propanoyl cation in the gas phase. A heat of formation of –86±6 kJ mol^?1 is obtained for methylketene, which leads to an absolute proton affinity of 853±8 kJ mol^?1.     

Heat of formation for the SH radical by photoionization mass spectrometry

Photoionization mass spectrometry has been used to measure the appearance energies for [C₂H₅]⁺ from ethanethiol, [C₃H₇]⁺ from 2-propanethiol and [C₃H₅]⁺ from 2-methylthiirane. From the known thermochemistry of these cations and their precursor molecules, a 298 K heat of formation of 138.6±0.4 kJ mol^?1 for the SH radical has been derived.     

Influence of matrix on relative sensitivity factors in spark-source mass spectrometric analysis

In spark-source mass spectrometric analysis, relative sensitivity factors are commonly used for sensitivity correction. The influence of matrix elements (aluminum, iron, copper and molybdenum) on such factors was studied under similar experimental conditions. The factor relative to iron, which is contained in the above four metals, varied with the matrix, but an equation based on the independent correlation of matrix and measured element with a physical property of these elements, was satisfactory. Melting point gave a better multiple correlation than boiling point or heat of sublimation. From this equation under given experimental conditions, it should be possible to calculate relative sensitivity factors in the absence of reference materials.     

Investigations on cluster and molecular ion formation by plasma mass spectrometry

The formation of molecular and cluster ions of different inorganic materials in plasma mass spectrometry – spark source mass spectrometry (SSMS), radiofrequency glow discharge mass spectrometry (rf GDMS), laser ionization mass spectrometry (LIMS), inductively coupled plasma mass spectrometry (ICP-MS) and laser ablation ICP-MS (LA-ICP-MS) – was investigated and compared. Similar abundance distributions of cluster ions were observed for a graphite sample, for boron nitride/ graphite and for metal oxide/graphite mixtures using different plasma mass spectrometric methods. A correlation of intensities of metal argide ions in ICP-MS with their bond dissociation energies was used to estimate unknown dissociation energies of molecular ionic species. For the elements of the 2nd or 3rd period in the periodic table, the intensities of most argon molecular ions (ArX⁺) measured by ICP-MS rise with increasing atomic number in a similar manner to the theoretically calculated bond dissociation energies of argon molecular ions.     

Nano/microscale order affects the early stages of biofilm formation on metal surfaces

The adhesion of Pseudomonas fluorescens was studied on nano/microengineered surfaces. Results show that these bacteria formed well-defined aggregates on randomly oriented nanosized granular gold substrates. These aggregates consist of aligned ensembles of bacteria, with some of them strongly elongated. This kind of biological structure was not found on ordered engineered surfaces because bacterial alignment and cell-to-cell sticking were hindered. Importantly, differences in cell morphology, length, orientation, and flagellation were observed between bacteria attached on the ordered nano/microstructures and the randomly ordered surfaces. The implications of the results are related to the design of engineered surfaces to enhance (nanostructured filters) or inhibit (medical implants and industrial biofouling) bacterial colonization on the surfaces and to the biocontrol of soil ecosystems.     

Glycopeptide analysis by mass spectrometry

Glycosylation is one of the most important post-translational modifications found in nature. Identifying and characterizing glycans is an important step in correlating glycosylation structure to the glycan's function, both in normal glycoproteins and those that are modified in a disease state. Glycans on a protein can be characterized by a variety of methods. This review focuses on the mass spectral analysis of glycopeptides, after subjecting the glycoprotein to proteolysis. This analytical approach is useful in characterizing glycan heterogeneity and correlating glycan compositions to their attachment sites on the protein. The information obtained from this approach can serve as the foundation for understanding how glycan compositions affect protein function, in both normal and aberrant glycoproteins.