Power and radiance scaling of a 946 nm Nd:YAG planar waveguide laser

We present a diode-end-pumped Nd:YAG planar waveguide laser operating on neodymium’s quasi-four-level transition at a wavelength of 946 nm. Two modes of operation are described: a high-power multi-mode monolithic cavity generating 105 for 210 W of incident pump power with a slope efficiency of ∼54%, and secondly, a high-radiance configuration employing an external stable resonator producing a maximum output power of 29.2 for 86.5 W of incident pump-power, with a slope efficiency of 33%. The output beam quality values of the external cavity were M² of 3.2 by 2.4, leading to a maximum radiance of 0.43 GW cm⁻² sr⁻¹.     

Stable output, high power diode-pumped Tm:YLF laser with a volume Bragg grating

A stable output, high power diode-pumped Tm: YLF laser operating at 1908 nm with FWHM line width less than 0.1 nm is reported. Using a volume Bragg grating, 41.1 W of output with M ²∼2 under an incident pump power of 111.7 W was achieved, corresponding to an optical-to-optical conversion efficiency of 36.8% and a slope efficiency of 43.2%. A laser wavelength shift of only 0.3 nm with the incident pump power varying from 13.1 W to 111.7 W was observed.     

Compact resonantly intra-cavity pumped tunable Ho:Sc2SiO5 laser

A compact intra-cavity pumped low threshold continuous-wave Ho:Sc₂SiO₅ laser is reported. The characteristics of output wavelength tuning are investigated by use a intra-cavity briefringent (BF) filter. A wavelength tunable range of 140 nm from 2020 to 2160 nm is achieved. For the free-running mode, the laser slope efficiency is 24.8%, when the output central wavelength is 2110 nm. The laser threshold is about 820 mW of incident pump power. With the BF filter, a maximum output power of 870 mW is obtained at the incident pump power of 5 W, corresponding to a slope efficiency of 20.3%. The characteristics of output wavelength verse the crystal temperature are also investigated.     

High beam quality and compact diode end-pumped Nd:YVO<Subscript>4</Subscript> slab laser with a hybrid resonator

A compact, high power and high beam quality diode-end-pumped CW Nd:YVO₄ slab 1064 nm laser with a hybrid resonator is demonstrated. The maximum output power of 23.0 W is obtained under the pump power of 66.7 W, which gives the slope efficiency and optical conversion efficiency of 52.0 and 34.0%, respectively. The beam quality M² factors are measured to be 1.5 in the unstable direction and 1.7 in the stable direction. The power stability of the LD end-pumped slab laser at an output power of 19 W is measured to be 0.7% for half an hour operation.     

Efficient Ho : YAG laser pumped by a cladding-pumped tunable Tm : silica-fibre laser

Highly efficient room-temperature operation of a Ho:YAG laser end pumped by a cladding-pumped tunable Tm-doped silica-fibre laser operating at 1905 nm is reported. Using a simple two-mirror resonator configuration, we obtained 6.4 W of unpolarized output at 2097 nm in a diffraction-limited TEM₀₀ beam (with M²1.1) for 9.6 W of incident pump power, corresponding to a slope efficiency with respect to incident pump power of 80% and an optical-to-optical efficiency of 67%. Using a folded-resonator configuration incorporating a Brewster-angled glass plate, we obtained 5.8 W of linearly polarized TEM₀₀ output, corresponding to an optical-to-optical efficiency of 60%. Due to low quantum defect heating, the depolarization loss due to thermally induced birefringence in the Ho:YAG crystal was <0.14% at the maximum available pump power, indicating that there is scope for further power scaling. PACS 42.55.-f; 42.55.Xi; 42.55.Wd; 42.60.Pk     

8.9-W continuous-wave, diode-end-pumped all-solid-state Nd:YVO4 laser operating at 914 nm

A high power laser-diode-array end-pumped 0.2 at % Nd:YVO₄ continuous-wave (CW) laser operating at 914 nm is reported in this letter. The maximum output power of 8.9 W was obtained at the incident pump power of 48.0 W, giving the corresponding optical efficiency of 18.5% and the average slope efficiency of 25.7%. The beam quality factor was measured to be M ² = 2.71 at the output power of 8.0 W by the traveling knife-edge method.     

Diode-pumped monolithic Er3+:Yb3+:YAl3(BO3)4 micro-laser at 1.6 μm

Efficient eye-safe 1.6 μm monolithic laser was realized in a c-cut, 0.7-mm-thick Er³⁺:Yb³⁺:YAl₃(BO₃)₄ microchip end-pumped by a quasi-continuous-wave 970 nm diode laser. At incident pump peak power of 20.4 W, a maximum output peak power of 2.6 W with a slope efficiency of 19% was obtained when the waist radius of pump laser beam was 220 μm. The spectra and profiles of output beam of the Er³⁺:Yb³⁺:YAl₃(BO₃)₄ monolithic laser were measured. The influences of the waist radius of pump laser beam on the slope efficiency and threshold of the monolithic laser were also investigated.     

Intracavity frequency-doubled diode-pumped Nd : LaSc3(BO3)4 lasers

 An intracavity frequency-doubled 10%Nd : LaSc₃(BO₃)₄ (Nd : LSB) laser was investigated in different resonator configurations and in different operation modes under continuous wave (cw) and quasi-cw laser-diode pumping. With a Cr⁴⁺ : YAG passive modulator and a KTP crystal the second-harmonic output power at 531 nm amounted to 190 mW in Q-switched TEM₀₀ mode at 750 mW of pump power. In a sandwich resonator, when all the optical elements were in direct contact with each other, 0.8 W of green output power was obtained in cw mode under 2.7 W of pump power with a slope efficiency of 44%. In the same setup under fiber-coupled diode-laser array pumping (5.6 W of incident power), 1.2 W of green output power was achieved in cw mode and 1.4 W in quasi-cw mode. Received: 30 April 1996/Revised version: 1 July 1996     

Tm:fiber laser in-band pumped Ho:LuAG laser with over 18 W output at 2124.5 nm

We describe efficient operation of a Ho:LuAG laser in-band pumped by a cladding-pumped narrow linewidth Tm fiber laser at ∼1907 nm. With 1.0 at % Ho³⁺-doped LuAG and an output coupler of 6% transmission, the laser had a threshold pump power of ∼0.85 W and generated 18.04 W of continuous-wave output power at 2124.5 nm for 35 W of incident pump power, corresponding to an average slope efficiency with respect to incident pump power of 53.4%.     

Laser diode pumped actively Q-switched Nd:GdVO4 self-Raman laser operating at 1173 nm

A laser diode pumped actively Q-switched Nd:GdVO₄ self-Raman laser operating at 1173 nm is presented. The maximum output power was 2.26 W at an incident pump power of 18 W, with the corresponding optical conversion efficiency of 12.6%. Two different resonator configurations were investigated in order to achieve high output power and efficiency.     

Efficient generation of blue light by intracavity frequency doubling of a cw Nd:YAG laser with LBO

We report on the efficient room-temperature operation of ⁴F_3/2–⁴I_9/2 transition in a diode pumped Nd:YAG laser operating at 946 nm. An output power of 5.1 W and a slope efficiency of 23.6% at 946 nm have been obtained. Different LBO crystals of length 3×3×10 mm³, 3×3×15 mm³, 3×3×18 mm³ were selected as frequency doubling material for comparison. A maximum single-ended output power of 1.3 W at 473 nm was achieved by frequency doubling with an optical conversion efficiency of 5%. When the Nd:YAG rod was replaced by the one with high reflectivity coating at 473 nm on the pump side, the output power of blue light was almost twice that without high reflectivity coating for 473 nm at the same pump power level. Moreover, the theoretical optimum length of LBO crystal for intracavity frequency doubling was discussed, and the experimental results made a good agreement with it.     

A comparison of resonantly pumped Ho:YLF and Ho:LLF lasers in CW and Q-switched operation under identical pump conditions

Singly 0.5 at.% Ho doped crystals of YLiF₄ (YLF) and LuLiF₄ (LLF) are studied under identical pump conditions in continuous-wave (CW) and Q-switched operation. Longitudinal end-pumped CW laser performance shows Ho:LLF to have a slightly lower threshold and a slightly higher slope efficiency with respect to absorbed pump power than Ho:YLF. Both lasers were operated on π-polarization. At a cavity output coupling of 20% and a crystal length of 30 mm, the Ho:LLF (Ho:YLF) laser yielded 18.8 W (18 W) of CW output at a wavelength of 2067.8 nm (2064.0 nm) for 41.4 W (42.2 W) of absorbed pump power with a slope efficiency of 67.1% (65.6%) and an optical-to-optical efficiency of 45.4% (42.6%) with respect to absorbed pump power. With the same output coupling and a crystal length of 40 mm, the Ho:LLF (Ho:YLF) laser yielded 20.5 W (18.1 W) of CW output at a wavelength of 2067.7 nm (2064.3 nm) for 51.5 W (50.0 W) of absorbed pump power with a slope efficiency of 58.4% (55.4%) and an optical-to-optical efficiency of 39.8 (36.1%) with respect to absorbed pump power. The influence of the temperature of the cooling mount on CW laser performance was studied and showed very similar results for both laser materials. At full pump power, a slope of −155 mW/°C (−149 mW/°C) was observed for the Ho:LLF (Ho:YLF) laser with a crystal length of 30 mm. In Q-switched operation, the Ho:LLF (Ho:YLF) laser produced 37 mJ (38.5 mJ) at a repetition rate of 100 Hz with a pulse duration of 38 ns (35 ns) at a wavelength of 2053.1 nm (2050.2 nm) with a slope efficiency of 30.3% (31%) and an optical-to-optical efficiency of 14.2% (13.9%) with respect to absorbed pump power. The beam quality was nearly diffraction limited (M ²<1.1).     

Room temperature operation of 2-μm microchip Tm,Ho:Lu2SiO5 laser

Room temperature operation of a c-cut microchip Tm,Ho:Lu₂SiO₅ laser end-pumping by a fibercoupled laser-diode is reported. A 4.03 W incident pump power is used to generate a maximum laser output of 98 mW, representing 2.43% optical-to-optical conversion efficiency and a 4.38% slope efficiency corresponding to incident power. In the experiment, the oscillating wavelengths shifting from 2.084 to 2.089 μm has been observed and approximately 10 mW single 2.087 μm wavelength oscillation has been obtained by changing the pump power to 1.43 W and the position of the pump focus.     

Highly efficient in-band pumped Er:YAG laser with 60 W of output at 1645 nm

A high-power Er:YAG laser that is in-band pumped by a high-power cladding-pumped erbium-ytterbium codoped fiber laser operating at 1532 nm is reported. The Er:YAG laser produced 60.3 W of continuous-wave output at 1645.3 nm in a beam with M2 approximately equal to 3 for 82 W of incident pump power and 20 W of TEM00 output with M2 < 1.2 for 32.4 W of incident pump power. The slope efficiency with respect to incident pump power at pump powers of >20 W was approximately 81%. In the Q-switched mode of operation, a slightly modified resonator configuration incorporating an electro-optic Q switch produced pulses of approximately 4 mJ energy and approximately 100 ns (FWHM) duration, corresponding to a peak power of approximately 42 kW at a repetition rate of 1 kHz for an incident pump power of 16.8 W. The prospects for further improvement in continuous-wave and Q-switched performance are discussed.     

Efficient high-power Ho:YAG laser directly in-band pumped by a GaSb-based laser diode stack at 1.9 μm

An efficient high-power Ho:YAG laser directly in-band pumped by a recently developed GaSb-based laser diode stack at 1.9 μm is demonstrated. At room temperature a maximum continuous wave output power of 55 W at 2.122 μm and a slope efficiency of 62% with respect to the incident pump power were achieved. For narrow linewidth laser operation a volume Bragg grating was used as output coupler. In wavelength stabilized operation a maximum output power of 18 W at 2.096 μm and a slope efficiency of 30% were obtained. In this case the linewidth is reduced from 1.2 nm to below 0.1 nm. Also spectroscopic properties of Ho:YAG crystals at room temperature are presented.     

Continuous-wave high-power Nd:YAG-KNbO3 laser at 473 nm

A continuous-wave high-power Nd:YAG laser operating on the ⁴F_3/2→⁴I_9/2 transition at 946 nm and intracavity frequency-doubled to 473 nm by a KNbO₃ nonlinear crystal at room temperature is reported. The Nd:YAG laser outputs a randomly polarized beam of 3.8 W maximum power (38% optical-to-optical efficiency and 44% slope efficiency with respect to the absorbed pump power) at the 946 nm fundamental wavelength. Intracavity frequency-doubling with a 2.0-mm thick KNbO₃ crystal in a linear resonator yielded 159-mW single-ended blue-output with 4.8% optical-to-optical conversion efficiency versus the absorbed pump power. The 473-nm maximum power of 418 mW with 11.6% optical-to-optical conversion efficiency in absorbed power was obtained from a V-type resonator; the overall optical-to-optical conversion efficiency was 6.7%, while the conversion of the available infrared power reached 50%.     

Performance of actively Q-switched Nd:LiLuF<Subscript>4</Subscript> crystal end-pumped by a 792 nm laser diode

An efficient laser diode end-pumped continuous-wave (CW) and AO Q-switched laser of Nd:LiLuF₄ crystal with dual central wavelengths of 1053.1 and 1054.7 nm is reported for the first time. The maximum CW output power of 6.22 W was obtained at absorbed pump power of ∼14.6 W with the output transmission of 2%. The optical conversion efficiency is ∼43%, corresponding to a slope efficiency of about 48% with respect to the absorbed pump. For the Q-switched operation, the shortest pulse width of 17 ns was obtained at the pulse repetition frequency (PRF) of 0.5 kHz, resulting in a pulse energy of 2.24 mJ and peak power of 131.8 kW.     

High-power end-pumped CW Nd:GdVO4 laser formed with a flat–flat cavity

Formed with a flat–flat resonator, a diode-laser-array end-pumped CW Nd:GdVO₄ laser at 1.06 μm, capable of generating 8.6 W of TEM₀₀ output power with optical conversion efficiency of 43% and slope efficiency of 48%, has been developed. The laser beam was nearly diffraction limited, with the beam quality factor measured to be M²=1.22. Under the conditions of multi-mode operation, the laser was able to produce 11.2 W of low-order transverse mode radiation (M²<2) at the incident pump power of 22 W, giving an optical conversion efficiency of 51%, and a slope efficiency of 55%.     

Comparative study of continuous wave Tm<Superscript>3+</Superscript>-doped silica and fluoride fiber lasers

We compare Tm³⁺-doped silica and fluoride fiber lasers in continuous wave operation using the same experimental setup. For incident pump powers of up to 50 W, the fluoride fiber is shown to have higher output power and efficiency compared to silica and reaches a maximum output power of 20 W at 1.94 μm. A slope efficiency of 49% (41%) and a maximum optical-to-optical efficiency of 45% (35%) at an incident pump power of 25 W (37 W) were determined for the fluoride (silica) fibers, respectively. These optical-to-optical efficiencies are the highest reported for directly diode-pumped Tm³⁺-based fiber lasers. We establish that in free-running mode, fiber lasers using fluoride glass are temporally more stable than fiber lasers using a silica host. PACS 42.55.Wd; 42.55.Xi; 42.60.Mi; 42.70.Hj     

Diode-pumped passively Q-switched Nd:LuVO4 laser at 916 nm

We demonstrate a passively Q-switched Nd:LuVO₄ laser at 916 nm by using a Nd, Cr:YAG crystal as the saturable absorber. As we know, it is the first time to realize the laser with a simple linear resonator. When the incident pump power increased from 14.6 W to 23.7 W, the pulse width of the Q-switched laser decreased from 24 ns to 21 ns. The pulse width was insensitive to the incident pump power in the experiment. The average output power of 288 mW with repetition rate of 39 kHz was obtained at an incident pump power of 22.5 W, with the optical-to-optical efficiency and slope efficiency 1.3% and 3.6%, respectively.