Nonequilibrium phases of nanoparticle Langmuir films

We report on an in-situ observation of the colloidal silver nanoparticle self-assembly into a close-packed monolayer at the air/water interface followed by a 2D to 3D transition. Using the fast tracking GISAXS technique, we were able to observe the immediate response to the compression of the self-assembled nanoparticle layer at the air/water interface and to identify all relevant intermediate stages including those far from the equilibrium. In particular, a new nonequilibrium phase before the monolayer collapse via the 2D to 3D transition was found that is inaccessible by the competing direct space imaging techniques such as the scanning and transmission electron microscopies due to the high water vapor pressure and surface tension.     

Monolayer/bilayer transition in Langmuir films of derivatized gold nanoparticles at the gas/water interface: an x-ray scattering study

The microscopic structure of Langmuir films of derivatized gold nanoparticles has been studied as a function of area/particle on the water surface. The molecules (AuSHDA) consist of gold particles of mean core diameter D approximately 22 angstroms that have been stabilized by attachment of carboxylic acid terminated alkylthiols, HS-(CH2)15-COOH. Compression of the film results in a broad plateau of finite pressure in the surface pressure versus area/particle isotherm that is consistent with a first-order monolayer/bilayer transition. X-ray specular reflectivity (XR) and grazing incidence diffraction show that when first spread at large area/particle, AuSHDA particles aggregate two dimensionally to form hexagonally packed monolayer domains at a nearest-neighbor distance of a = 34 angstroms. The lateral positional correlations associated with the two-dimensional (2D) hexagonal order are of short range and extend over only a few interparticle distances; this appears to be a result of the polydispersity in particle size. Subsequent compression of the film increases the surface coverage by the monolayer but has little effect on the interparticle distance in the close-packed domains. The XR and off-specular diffuse scattering (XOSDS) results near the onset of the monolayer/bilayer coexistence plateau are consistent with complete surface coverage by a laterally homogeneous monolayer of AuSHDA particles. On the high-density side of the plateau, the electron-density profile extracted from XR clearly shows the formation of a bilayer in which the newly formed second layer on top is slightly less dense than the first layer. In contrast to the case of the homogeneous monolayer, the XOSDS intensities observed from the bilayer are higher than the prediction based on the capillary wave model and the assumption of homogeneity, indicating the presence of lateral density inhomogeneities in the bilayer. According to the results of Bragg rod measurements, the 2D hexagonal order in the two layers of the bilayer are only partially correlated.     

Long-Range Lateral Correlation between Self-Assembled Domains of Fluorocarbon-Hydrocarbon Tetrablocks by Quantitative GISAXS

The structure and lateral correlation of fluorocarbon-hydrocarbon tetrablock di(F10Hm) domains at the air/water interface have been determined by quantitative analysis of grazing incidence small-angle X-ray scattering (GISAXS) data. The measured GISAXS signals can be well represented by the full calculation of the form and structure factors. The form factor suggests that di(F10Hm) domains take a hemiellipsoid shape. Both major and minor axes of the hemiellipsoids monotonically increased in response to the elongation of the hydrocarbon blocks, which can be explained by the concominant increase in van der Waals interaction. The structure factor calculated from the GISAXS signals suggests that the domains take an orthorhombic lattice. Remarkably, the lateral correlation can reach over a distance that is more than 14 times longer than the distance to the nearest neighbors. Our data suggest that quantitative GISAXS enables the optimal design of mesoscopic self-assemblies at the air/water interface by fine-tuning of the structures of molecular building blocks.     

Study on the Structure and Properties of Ordered Conductive Polymer Ultrathin Film

A Langmuir-Blodgett (LB) inducing method was firstly used to prepare single layer and multilayer conducting composite PEDOT-PSS film. The film-forming ability of ionization ODA and ODA-SA monolayer spread on PEDOT-PSS nanoparticle sub-phase and the behavior of ODA/PEDOT-PSS assembly particles on pure water were firstly investigated. The results indicated that nanoparticles in the suphase are packed in the ionization monolayer and stable complex Langmuir film is formed at the air/water interface. It has been found that the best film-forming conditions for composite film are as follows:distinct interface was formed between ODA and PEDOT-PSS layer and single layer thickness of PEDOT-PSS was about 23 nm,well accordant to the size of PEDOT-PSS nanoparticles. Different structures were designed to test the conductive ability of these composite films and a variable range hopping (VRH) model was used to explain the film conductive mechanism. The results indicated that a 3D-VRH model explained well the transferring of charge carrier in the multilayer film.     

Reversible activation of diblock copolymer monolayers at the interface by pH modulation, 2: Membrane interactions at the solid/liquid interface

A monolayer of the pH-responsive poly[2-(dimethylamino)ethyl methacrylate-block-methyl methacrylate] diblock copolymer [PDMAEMA-PMMA] was transferred from the air/water interface to a silicon substrate for evaluation as a tunable interlayer between biological material and solid substrates. Specular neutron reflectivity experiments revealed that the weak polyelectrolyte PDMAEMA chains at the solid/liquid interface can be reversibly activated by pH modulation. The thickness, scattering length density, and surface roughness of the polymer film can be systematically controlled by pH titration. As a simple model of plasma membranes, a lipid bilayer was deposited onto the polymer film. The membrane-substrate interaction was characterized by neutron reflectivity experiments, demonstrating that the membrane-substrate distance could be reversibly regulated by pH titration. These results confirm the potential of stimuli-responsive polymers for precise control of cell-surface interactions.     

X-ray investigation of monolayers formed at the soft air/water interface

Gibbs or Langmuir monolayers formed at the soft air/liquid interface are easy to handle and versatile model systems for material and life sciences. The phase state of the monolayers can be modified by lateral compression of the film while the layer structural changes are monitored by highly sensitive surface characterization techniques. The use of high brilliant synchrotron light sources for X-ray experiments is essential for the monolayer research. The present review highlights the recent achievements recorded in the monolayer field with a special emphasis on different synchrotron based X-ray characterizing methods as: grazing incidence X-ray diffraction, X-ray reflectivity and total reflection X-ray fluorescence. Some examples of single-chain surfactants, special sugar lipids, and semifluorinated compounds are given. Additionally, thin layers formed by peptides, polymers or nanoparticles are highlighted.     

Unexpected bilayer formation in Langmuir films of nucleolipids

Langmuir monolayers have been extensively investigated by various experimental techniques. These studies allowed an in-depth understanding of the molecular conformation in the layer, phase transitions, and the structure of the multilayer. As the monolayer is compressed and the surface pressure is increased beyond a critical value, usually occurring in the minimal closely packed molecular area, the monolayer fractures and/or folds, forming multilayers in a process referred to as collapse. Various mechanisms for monolayer collapse and the resulting reorganization of the film have been proposed, and only a few studies have demonstrated the formation of a bilayer after collapse and with the use of a Ca(2+) solution. In this work, Langmuir isotherms coupled with imaging ellipsometry and polarization modulation infrared reflection absorption spectroscopy were recorded to investigate the air-water interface properties of Langmuir films of anionic nucleolipids. We report for these new molecules the formation of a quasi-hexagonal packing of bilayer domains at a low compression rate, a singular behavior for lipids at the air-water interface that has not yet been documented.     

Effect of molecular surface packing on the enzymatic activity modulation of an anchored protein on phospholipid Langmuir monolayers

The catalytic activity of a glycosylphosphatidylinositol (GPI)-anchored alkaline phosphatase has been studied in Langmuir phospholipid monolayers at different surface pressures. The enzyme substrate, p-nitrophenyl phosphate, was injected into the subphase of mixed enzyme/lipid Langmuir monolayers. Its hydrolysis product was followed by monitoring the absorbance at 410 nm in situ in the monolayer subphase of the Langmuir trough. Several surface pressures, corresponding to different molecular surface densities, were attained by lateral compression of the monolayers. The morphology of the monolayers, observed by fluorescence microscopy, showed three different types of domains owing to the heterogeneous partition of the enzyme within the mixed enzyme/lipid film. The catalytic activity was modulated by the enzyme surface density, and it increased until a pressure of 18 mN/m was reached, but it decreased significantly when the equilibrium in-plane elasticity (surface compressional modulus) increased more noticeably, resulting in alterations in the interface morphology. A model for the modulation of the enzyme orientation and catalytic activity by lipid/enzyme surface morphology and enzyme surface packing at the air/liquid interface is proposed. The results might have an important impact on the comprehension of the enzymatic activity regulation of GPI-anchored proteins in biomembranes.     

Compression induced helical nanotubes in a spreading film of a bolaamphiphile at the air/water interface

Inspired by the elegant helical structures endowed by mother nature, we designed an L-glutamic acid terminated bolaamphiphile and obtained helical nanotubes through the manipulation on the two-dimensional Langmuir films at the air/water interface. It has been found that on the subphase with a pH value lower than 3, stable monolayers with plateau regions were obtained for the bolaamphiphile. Although a flat and uniform morphology was observed for the film deposited at a surface pressure below the plateau region, helical nanotube structures were obtained when the film was compressed over the plateau region. It was suggested that the compression of the monolayer at the air/water interface caused the one end of the bolaamphiphile to leave from the water surface and form an intermediate monolayer in which one end group attached on the water surface and the other extruded in the air. Such an intermediate monolayer subsequently rolled into a helical structure due to the chiral nature of the L-glutamic acid headgroup.     

Glyco-acrylate copolymers for bilayer tethering on benzophenone-modified substrates

Model biological membranes are becoming increasingly important for studying fundamental biophysical phenomena and developing membrane-based devices. To address the anticipated problem of non-physiological interactions between membrane proteins and substrates seen in “solid-supported lipid bilayers” that are formed directly on hydrophilic substrates, we have developed a polymer-tethered lipid bilayer system based on a random copolymer with multiple lipid analogue anchors and a glyco-acrylate backbone. This system is targeted at applications that, most importantly, require stability and robustness since each copolymer has multiple lipid analogues that insert into the bilayer. We have combined this copolymer with a flexible photochemical coupling scheme that covalently attaches the copolymer to the substrate. The Langmuir isotherms of mixed copolymer/free lipid monolayers measured at the air–water interface indicate that the alkyl chains of the copolymer lipid analogues and the free lipids dominate the film behavior. In addition, no significant phase transitions are seen in the isotherms, while hysteresis experiments confirm that no irreversible states are formed during the monolayer compression. Isobaric creep experiments at the air–water interface and AFM experiments of the transferred monolayer are used to guide processing parameters for creating a fluid, homogeneous bilayer. Bilayer homogeneity and fluidity are monitored using fluorescence microscopy. Continuous bilayers with lateral diffusion coefficients of 0.6 μm²/s for both leaflets of the bilayer are observed for a 5% copolymer system.     

掺杂态聚苯胺LB膜的制备与性质

掺杂樟脑磺酸的聚苯胺在纯水表面可以形成稳定的单分子层,采用Ｌａｎｇｍｕｉｒ－Ｂｌｏｄｇｅｔｔ技术可以将其较好地转移到氟化 基片上制成薄膜,对其ＬＢ膜的红外和紫外－可见－近红外光谱研究表明,在膜的压缩或转移过程中有少量的樟脑磺酸分子发生脱掺杂的现象,并且该ＬＢ膜在室温下对乙醇有较好的气敏性。     

Langmuir monolayers from perfluorobutyl-n-eicosane

Perfluorobutyl-n-eicosane (abbreviated as F4H20) was spread at the air/water as Langmuir monolayers and studied under different experimental conditions, such as spreading volume, subphase temperature and compression speed. The Langmuir monolayer experiments (π-A isotherms) have been complemented with Brewster angle microscopy results, which enabled direct visualization of the monolayers’ structure and estimation of the film thickness at different stages of compression. It has been found that the molecules are oriented almost vertically (with respect to the interface) in the vicinity of film collapse. The negative sign of the measured surface potential, ΔV, is evidence for the orientation of F4H20 molecules with their perfluorinated parts exposed towards the air. In the case of F4H20 a limited fluorination relative to perfluoroeicosane also results in monolayer formation, in contrast to eicosane itself, which forms lenses.     

Nystatin in Langmuir monolayers at the air/water interface

The paper presents a thorough characteristics of Langmuir monolayers formed at the air/water interface by a polyene macrolide antibiotic-nystatin. The investigations are based on the analysis of pi/A isotherms recorded for monolayers formed by this antibiotic at different experimental conditions. A significant part of this work is devoted to the stability and relaxation phenomena. It has been found that nystatin forms at the air/water interface monolayers of the LE state. A plateau region, observed during the course of the isotherm compression, is suggested to be due to the orientational change of nystatin molecules from horizontal to vertical position. Quantitative analysis of the desorption of the monolayer material into bulk water indicates that the solubility of nystatin monolayers increases with surface pressure. At low surface pressures, the desorption of nystatin from a monolayer is controlled both by dissolution and by diffusion. However, at the plateau and in the post-plateau region, the desorption does not achieve a steady state and the monolayer is less stable than in the pre-plateau region. However, the presence of membrane lipids, even at a low mole fraction, considerably increases the stability of nystatin monolayers. This enables the application of the Langmuir monolayer technique to study nystatin in mixture with cellular membrane components, aiming at verifying its mode of action and the mechanism of toxicity.     

Interface geometry of Ag thin films supported at the MgO(1 0 0) surface: an ab-initio periodic study

In this Letter, the interface geometry of silver thin films of thickness T between 1 and 3 ML epitaxially deposited at the MgO surface has been accurately characterized employing DFT periodic calculations. The Ag–Ag out-of-plane interlayer spacing is considerably shorter than the bulk values because of: (i) the reduced dimension; (ii) the perfect epitaxy constraint; (iii) the interaction with the substrate. The interface distance between the silver monolayer and the MgO substrate, d(Ag–O) = 2.60 Å, is considerably longer than the estimates computed for the bilayer and the trilayer, d(Ag–O) = 2.47 and 2.48 Å, respectively. The difference between the values of the interface distance computed for the monolayer and the results obtained for thicker films, lies in the peculiar electronic properties of the silver monolayer.     

Formation of silver nanoparticles at the air-water interface mediated by a monolayer of functionalized hyperbranched molecules

Nanofibrillar micellar structures formed by the amphiphilic hyperbranched molecules within a Langmuir monolayer were utilized as matter for silver nanoparticle formation from the ion-containing water subphase. We observed that silver nanoparticles were formed within the multifunctional amphiphilic hyperbranched molecules. The diameter of nanoparticles varied from 2-4 nm and was controlled by the core dimensions and the interfibrillar free surface area. Furthermore, upon addition of potassium nitrate to the subphase, the Langmuir monolayer templated the nanoparticles' formation along the nanofibrillar structures. The suggested mechanism of nanoparticle formation involves the oxidation of primary amino groups by silver catalysis facilitated by "caging" of silver ions within surface areas dominated by multibranched cores. This system provides an example of a one-step process in which hyperbranched molecules with outer alkyl tails and compressed amine-hydroxyl cores mediated the formation of stable nanoparticles placed along/among/beneath the nanofibrillar micelles.     

Synthesis of nanostructured metal-organic films: surface X-ray radiolysis of silver ions using a langmuir monolayer as a template

An application of the radiolysis method using an X-ray synchrotron beam is developed as a novel approach to the synthesis of metal-organic films with controlled shapes and thickness. We demonstrate that a Langmuir monolayer deposited onto a silver ion containing subphase, irradiated by an incident beam impinging below the critical angle for total reflection, induces the synthesis of a stable nanostructured silver-organic ultrathin film at the air-water interface. The X-ray scattering is also used to monitor in situ the structure of the silver layer during the synthesis process. The layer is observed by atomic force microscopy after its transfer onto a silicon substrate. One observes a film thickness of 4.6 nm, in good agreement with the X-ray penetration depth, about 4.5 nm. The silver structure is oriented by the initial organic film phase. This experiment demonstrates the considerable potential of this approach to produce various controlled metal-organic films with a surfactant self-assembly as a template.     

Physicochemical investigation of a lipid with a new core structure for gene transfection: 2-amino-3-hexadecyloxy-2-(hexadecyloxymethyl)propan-1-ol

Cationic liposomes/DNA complexes can be used as nonviral vectors for direct delivery of DNA-based biopharmaceuticals to damaged cells and tissues. In order to obtain more effective and safer liposome-based gene transfection systems, the new cationic lipid 2-amino-3-hexadecyloxy-2-(hexadecyloxymethyl)propan-1-ol (AHHP) was synthesized. In this paper we report on the synthesis of AHHP and investigations of its physical-chemical properties. Langmuir monolayers of AHHP were studied at the air/buffer interface by film balance measurements, grazing incidence X-ray diffraction (GIXD), and infrared reflection absorption spectroscopy (IRRAS). Structure and thermotropic phase behavior of AHHP in aqueous dispersion were examined by small-angle and wide-angle X-ray scattering (SAXS/WAXS) and differential scanning calorimetry (DSC). The results show clear differences in structure and phase behavior of AHHP, both in the monolayer system and in aqueous dispersions, in dependence on the subphase pH due to protonation or deprotonation of the primary amine in the lipid head group. Thermodynamic data derived from pi-A isotherms provide information about the critical temperature (Tc), which is in rough agreement with the temperature of the lipid phase transition from gel to fluid state (Tm) found by X-ray and calorimetry studies of AHHP aqueous dispersions. The packing properties of the molecules in mono- and bilayer systems are very similar. DNA couples to the monolayer of the new lipid at low as well as at high pH but in different amounts. The DNA coupling leads to an alignment of adsorbed DNA strands indicated by the appearance of a Bragg peak. The distance between aligned DNA strands does not change much with increasing monolayer pressure.     

Reversible activation of diblock copolymer monolayers at the interface by pH modulation, 1: Lateral chain density and conformation

This study focuses on the design of chemically regulated surfaces that allow for reversible control of the interactions between biological matter (cells and proteins) and planar substrates. As a tunable interlayer, we use a monolayer of a near-monodisperse poly[2-(dimethylamino)ethyl methacrylate-block-methyl methacrylate] (PDMAEMA-PMMA) diblock copolymer. Owing to the relatively large fraction (50%) of the hydrophobic PMMA block, this copolymer forms a stable Langmuir monolayer at the air/water interface. Both in situ and ex situ film balance experiments suggest that the hydrophilic PDMAEMA block adsorbs to the air/water interface in its uncharged state (pH 8.5), but stretches into the subphase in its charged state (pH 5.5). Optimization of the preparation protocols enables us to fabricate stable, homogeneous diblock copolymer films on hydrophobized substrates via Langmuir-Schaefer transfer at well-defined lateral chain densities. Ellipsometry and X-ray reflectivity studies of the transferred films confirm that the film thickness can be systematically regulated by the lateral chain densities. The transferred copolymer films remain stable in water for about a week, suggesting that they are promising materials for the creation of pH-controlled solid substrates for the support of biological matter such as proteins and cells.     

硬脂酸单分子膜上电沉积Ag膜的研究

通过电沉积方法,以气/液界面上形成的硬脂酸单分子膜为模板诱导沉积金属银膜.考察了镀液pH值、单分子膜表面压及沉积电位对银膜形貌及结构的影响.实验发现,酸性镀液的气/液界面上形成的单分子膜不能诱导沉积银,而在中性和碱性镀液的气/液界面上可以诱导银膜的生长.当单分子膜处于液态或固态时,气/液界面有银膜形成;液态单分子膜上的银膜生长速度较快,且银膜的结构一致.随着电极电位的升高,银膜沉积的速度加快,呈环状向外生长的圆形银膜逐渐变得不规则.将不同实验条件下的银膜转移出来,采用扫描电镜(SEM)、透射电镜(TEM)对银膜的结构与形貌进行了表征.研究表明,银首先在单分子膜上异相成核,由八面体构型逐渐发展成星型,最终在气/液界面形成具有松枝状微观结构的光亮银膜.     

Langmuir–Blodgett films of stearic acid deposited on substrates at different orientations relative to compression direction: alignment layer for nematic liquid crystal

The Langmuir monolayer at an air–water interface shows remarkably different surface pressure (π)–area (A) isotherm, when measured with the surface normal of a Wilhelmy plate parallel or perpendicular to the direction of compression of the monolayer. Such difference arises due to difference in stress exerted by the monolayer on the plate in different direction. In this article, we report the effect of changing the direction of substrate normal with respect to the compression of the monolayer during Langmuir–Blodgett (LB) film deposition on the morphology of the films. The morphology of the LB film of stearic acid is studied using an atomic force microscope. The morphology of the LB films is found to be different due to difference in the stress in different directions. The role of such surface morphology on the alignment of a nematic liquid crystal (LC) in LC cells is studied. The granular texture of LB films of stearic acid supports the homogeneous alignment of the LC whereas the uniform texture supports the homeotropic alignment of the LC.