Synthesis and characterization of ABA‐type amphiphilic tri‐block copolymers through anionic polymerization using end functionalized poly(ethylene oxide) oligomers

ABA‐type amphiphilic tri‐block copolymers were successfully synthesized from poly(ethylene oxide) derivatives through anionic polymerization. When poly(styrene) anions were reacted with telechelic bromine‐terminated poly(ethylene oxide) ( 1 ) in 2:1 mole ratio, poly(styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) tri‐block copolymers were formed. Similarly, stable telechelic carbanion‐terminated poly(ethylene oxide), prepared from 1,1‐diphenylethylene‐terminated poly (ethylene oxide) ( 2 ) and sec‐BuLi, was also used to polymerize styrene and methyl methacrylate separately, as a result, poly (styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) and poly (methyl methacrylate)‐b‐poly(ethylene oxide)‐b‐poly(methyl methacrylate) tri‐block copolymers were formed respectively. All these tri‐block copolymers and poly(ethylene oxide) derivatives, 1 and 2 , were characterized by spectroscopic, calorimetric, and chromatographic techniques. Theoretical molecular weights of the tri‐block copolymers were found to be similar to the experimental molecular weights, and narrow polydispersity index was observed for all the tri‐block copolymers. Differential scanning calorimetric studies confirmed the presence of glass transition temperatures of poly(ethylene oxide), poly(styrene), and poly(methyl methacrylate) blocks in the tri‐block copolymers. Poly(styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) tri‐block copolymers, prepared from polystyryl anion and 1 , were successfully used to prepare micelles, and according to the transmission electron microscopy and dynamic light scattering results, the micelles were spherical in shape with mean average diameter of 106 ± 5 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The Synthesis of Poly(ethylene oxide)-Block-Polybutylacrylate

ＴｈｅＳｙｎｔｈｅｓｉｓｏｆＰｏｌｙ（ｅｔｈｙｌｅｎｅｏｘｉｄｅ）┐Ｂｌｏｃｋ┐Ｐｏｌｙｂｕｔｙｌａｃｒｙｌａｔｅ＊＊ＳｕｐｐｏｒｔｅｄｂｙｔｈｅＮａｔｉｏｎａｌＮａｔｕｒａｌＳｃｉｅｎｃｅＦｏｕｎｄａｔｉｏｎｏｆＣｈｉｎａａｎｄＤｏｃｔｏｒａｌｆｏ...     

Double hydrophilic block copolymers of sodium(2‐sulfamate‐3‐carboxylate)isoprene and ethylene oxide

Poly(sodium(2‐sulfamate‐3‐carboxylate)isoprene)‐b‐poly(ethylene oxide) and poly(ethylene oxide)‐b‐poly(sodium(2‐sulfamate‐1‐carboxylate)isoprene)‐b‐poly(ethylene oxide) double hydrophilic block copolymers were prepared by selective post polymerization reaction of the polyisoprene block, of poly(isoprene‐b‐ethylene oxide) diblocks or poly(ethylene oxide‐b‐isoprene‐b‐ethylene oxide) triblock precursors, with N‐chlorosulfonyl isocyanate. The precursors were synthesized by anionic polymerization high vacuum techniques and had narrow molecular weight distributions and predictable molecular weights and compositions. The resulting double hydrophilic block copolymers were characterized by FTIR and potentiometric titrations in terms of the incorporated functional groups. Their properties in aqueous solutions were studied by viscometry and dynamic light scattering. The latter techniques revealed a complex dilute solution behavior of the novel block copolymers, resulting from the polyelectrolyte character of the functionalized PI block and showing a dependence on solution ionic strength and pH. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 606–613, 2006     

AB型两亲聚L-谷氨酸-苄酯-聚乙二醇嵌段共聚物的合成与表征

利用L 谷氨酸和苯甲醇反应制备了L 谷氨酸 苄酯 ,然后将其与三聚光气反应制备了N 羧基 L 谷氨酸 环内酸酐 (NCA) .以聚乙二醇单甲醚 (MPEG)为原料 ,制备了端氨基聚乙二醇单甲醚 (MPEG NH2 ) ,并以此作为引发剂 ,引发NCA开环聚合 ,合成了不同分子量的聚L 谷氨酸 苄酯 聚乙二醇单甲醚 (PBGM )嵌段共聚物 .利用IR、1 H NMR、DSC、GPC等方法对共聚物结构进行了表征 .结果表明 ,MPEG NH2 引发NCA开环聚合得到的是嵌段共聚物 ,通过1 H NMR谱得到共聚物组成及数均分子量 ;随着共聚物中MPEG含量的增高 ,聚L 谷氨酸 苄酯的亲水性有所改善     

Poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide)-g-poly(vinyl pyrrolidone): synthesis and characterization

Pluronic poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers are grafted with poly(vinyl pyrrolidone) by free radical polymerization of vinyl pyrrolidone with simultaneous chain transfer to the Pluronic in dioxane. This modified polymer has both thermal responsiveness and remarkable capacity to interact with a wide variety of hydrophilic and hydrophobic pharmaceutical agents which is very attractive for medical applications. The chemical structure of the graft copolymers was characterized by FTIR and 1H NMR spectroscopy. Polymerization conditions such as initiators, feed ratio, and reaction times are studied to obtain the ideal graft copolymer.     

Study of Solution Polymerization of Styrene in the Presence of Poly(ethylene glycol)-RAFT Agents Possessing Benzoyl Xanthate Derivatives

In this work, Macro-Reversible addition fragmentation termination (RAFT) agents based on poly(ethylene glycol) (PEG) possessing different molecular weights and bearing benzoyl xanthate moieties were synthesized by the reaction of PEG potassium xanthate salts with benzoyl chloride, 4-methyl benzoyl chloride and 4-chloro benzoyl chloride. Controlled free radical polymerization of the styrene were carried out in the presence of these macro-RAFT agents using 2,2′-azobisizsobutyronitrile (AIBN) as an initiator to yield PS-b-PEG-b-PS block copolymers. The linear kinetic plot ln [M]_o/[M] vs. polymerization time indicated that was first order with reference to monomer concentration. The block copolymerization possessed controlled/living character. The controlled character of the RAFT polymerization of the styrene was confirmed by the formation of narrow polydispersity of the polymers, linear increases in the molecular weight with polymerization time and molecular weight of the products that agreed well with theoretical values. Polymers having relatively narrow molecular weight distributions and predetermined number average molecular weights were obtained by the RAFT polymerization of the styrene. However, molecular weights of the polymers deviated from the theoretical values when low molecular weight RAFT agents are used. The results indicate that PEG benzoyl xanthate RAFT agents can more efficiently control the polymerization comparing methyl or chlorobenzoyl derivatives. The block copolymers were characterized by spectroscopic and GPC methods.     

Synthesis of poly(ethylene glycol) block copolymers by a redox process and their spectral characterization

Novel block copolymers of poly(ethylene glycol) (PEG) with acrylamide (AAm) and methacrylic acid (MAA) were synthesized using a redox system consisting of ceric ions and PEG in aqueous acidic medium. The molecular weight of PEG in the redox system was varied to obtain a series of block copolymers with differing molecular weights of PEG segment. The polymerization proceeded via macroradical generation, which was substantiated by ESR spectroscopy. This macroradical acted as a redox macroinitiator for the block copolymerization of the vinyl monomers. The formation of the block copolymers was confirmed by fractional precipitation technique.     

两亲型聚L-亮氨酸-聚乙二醇单甲醚嵌段共聚物的合成与表征

开环聚合;生物降解共聚物;两亲型聚L-亮氨酸-聚乙二醇单甲醚嵌段共聚物的合成与表征     

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide),PEG-b-(PNIPAM)_2,were successfully synthesized through atom transfer radical polymerization(ATRP).A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly(ethylene glycol) monomethyl ether(PEG).The copolymers were obtained via the ATRP of N-isopropylacrylamide(NIPAM) at 30℃with CuCl/Me_6TREN as a catalyst system and DMF/H_2O(v/v = 3:1) mixture as solvent.The resulting copo...     

Synthesis and characterization of H-type amphiphilic liquid crystalline block copolymers by ATRP

H-type amphiphilic liquid crystalline block copolymers containing azobenzene were synthesized by atom transfer radical polymerization （ATRP）. Macroinitiators prepared by the esterification between poly（ethylene oxide） （PEG） and 2,2-dichloroacetyl chloride were utilized to initiate the polymerization of 6-[4-（4-ethoxyphenylazo）phenoxy]hexyl rnethacrylate （M6C）. The resulting macroinitiators and block copolymers were characterized by ^1H NMR, gel permeation chromatography （GPC）. Polarizing optical microscopy （POM） and differential scanning calorimetry （DSC） preliminarily revealed the liquid crystalline property of these block copolymers. This series of liquid crystalline block copolymers are promising in some areas, such as optical data storage, optical switch, and molecular devices.     

Novel synthesis of biodegradable poly(lactide-co-ethylene glycol) block copolymers

Biodegradable and amphiphilic diblock copolymers [polylactide-block-poly(ethylene glycol)] and triblock copolymers [polylactide-block-poly(ethylene glycol)-block-polylactide] were synthesized by the anionic ring-opening polymerization of lactides in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. The polymerization in toluene at room temperature was very fast, yielding copolymers of controlled molecular weights and tailored molecular architectures. The chemical structure of the copolymers was investigated with ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and differential scanning calorimetry investigations. The monomodal profile of the molecular weight distribution by gel permeation chromatography provided further evidence of block copolymer formation as well as the absence of cyclic species. Additional confirmation of the block copolymers was obtained by the substitution of 2-butanol for poly(ethylene glycol); butyl groups were clearly identified by ¹H NMR as polymer chain end groups. The effects of the copolymer composition and lactide stereochemistry on the copolymer properties were examined. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2235–2245, 2007     

Synthesis and characterization of amphiphilic triblock copolymers by iron‐mediated atom transfer radical polymerization

The atom transfer radical polymerization of methyl methacrylate (MMA) and n‐butyl methacrylate (n‐BMA) was initiated by a poly(ethylene oxide) chloro telechelic macroinitiator synthesized by esterification of poly(ethylene oxide) (PEO) with 2‐chloro propionyl chloride. The polymerization, carried out in bulk at 90 °C and catalyzed by iron(II) chloride tetrahydrate in the presence of triphenylphosphine ligand (FeCl₂ · 4H₂O/PPh₃), led to A–B–A amphiphilic triblock copolymers with MMA or n‐BMA as the A block and PEO as the B block. A kinetic study showed that the polymerization was first‐order with respect to the monomer concentration. Moreover, the experimental molecular weights of the block copolymers increased linearly with the monomer conversion, and the molecular weight distribution was acceptably narrow at the end of the reaction. These block copolymers turned out to be water‐soluble through the adjustment of the content of PEO blocks (PEO content >90% by mass). When the PEO content was small [monomer/macroinitiator molar ratio (M/I) = 300], the block copolymers were water‐insoluble and showed only one glass‐transition temperature. With an increase in the concentration of PEO (M/I = 100 or 50) in the copolymer, two glass transitions were detected, indicating phase separation. The macroinitiator and the corresponding triblock copolymers were characterized with Fourier transform infrared, proton nuclear magnetic resonance, size exclusion chromatography analysis, dynamic mechanical analysis, and differential scanning calorimetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5049–5061, 2005     

Block copolymers derived from azobiscyanopentanoic acid. X. Synthesis of silicone–vinyl block copolymers via polysiloxane(azobiscyanopentanamide)s

The synthesis of silicone–vinyl block copolymers has been studied by the use of poly(azo-containing siloxaneamide)s (abbreviated as PASAs), i.e., polysiloxane (azobiscyanopentanamide)s as macroazoinitiators. PASAs with number-average molecular weight of 12000–31000 and with siloxane chain lengths of 250–9800 were prepared by the condensation of azobiscyanopentanoyl chloride and α,ω-bis(3-aminopropyldimethyl)polysiloxanes in equimolar feeds. Several kinds of silicone–vinyl block copolymers were synthesized by radical polymerization of vinyl monomers such as methyl methacrylate, styrene, and vinyl acetate, in the presence of PASA in homogeneous media. The block copolymers with siloxane contents up to 30 mol % were then characterized on the basis of infrared absorption, proton NMR spectra, and gel permeation chromatography.     

Styrene polymerization with some new macro or macromonomeric azoinitiators having peg units

Several new macroinitiators and macromerinitiators (macroinimers) were synthesized and evaluated for the bulk polymerization of sytrene at 60°C. Macroinitiators were prepared from the reaction of 4,4′-dicyano-4,4′ azovaleryl chloride ( 1 ) with poly(ethylene glycol) (PEG) with a M_ω of 400 and with either benzoyl chloride, acetyl chloride, phenyl isocyanate, or poly(ethylene glycol) oleyl ether. Macromer initiators were also prepared from the reaction of 1 with PEG having M_ω values of 200, 400, 600, 1000, or 1500 and with 4-vinylbenzyl chloride. The bulk polymerization of styrene by macroinimers gave crosslinked styrene-PEG block copolymers, while the polymerization by macroinitiators gave soluble copolymers. The molecular weights of the styrene-PEG block copolymers obtained with macroinitiators having either oleyl, benzoyl, or phenyl urethane end groups were 22000–29000 g/mol. DSC measurements showed that the crosslinked block copolymers had crystalline PEG units with melting transitions ranging from 11–37°C. © 1994 John Wiley & Sons, Inc.     

Synthesis of new,functionalized poly(butyl vinyl ether) oligomers and novel copolymers containing these materials

This paper reports the synthesis and characterization of new, functionalized poly(alkyl vinyl ether) oligomers, and block copolymers containing poly(alkyl vinyl ether) and poly(methyl methacrylate). Using the HI/ZnI₂ initiating system in nonpolar solvents (hexane, toluene) at −20°C, both monofunctional and difunctional poly(alkyl vinyl ether) oligomers of predicted molecular weights precisely terminated with aldehyde, primary hydroxyl and ester endgroups have been prepared. Novel diblock copolymers comprised of poly(methyl methacrylate) and poly(butyl vinyl ether) have also been synthesized using a combination of living cationic and living group transfer polymerization.     

Effects of nonionic surfactants on seeded polymerizations

The rate of polymerization of vinyl acetate in systems containing poly(vinyl acetate) seed particles was investigated. A significant reduction in rate was observed when nonionic surfactants were adsorbed onto the particles prior to polymerization. The molecular weight of the poly(ethylene oxide) moieties in the surfactants was varied over two decades. The diminution in rate was relatively insensitive to this molecular weight variation, at least for higher molecular weights (≥20,000). A minimum in the rate was apparent at lower molecular weights. No new nucleation was detectable in any of these systems. The results have been interpreted in terms of two properties of the dissolved poly(ethylene oxide) layers through which the oligomeric free radicals must diffuse in order to reach the major loci of polymerization inside the particles. These two properties, the effective thickness of the dissolved poly(ethylene oxide) layer and its average microscopic viscosity, are expected theoretically to be approximately self-compensating when the molecular weight is varied.     

Synthesis of Poly(methyl methacrylate)-poly(poly(ethylene glycol) methacrylate)-polyisobutylene ABCBA Pentablock Copolymers by Combining Quasiliving Carbocationic and Atom Transfer Radical Polymerizations and Characterization Thereof

Novel, unique amphiphilic pentablock terpolymers consisting of the highly hydrophobic polyisobutylene (PIB) mid-segment attached to the hydrophilic combshaped poly(poly(ethylene glycol) methacrylate) (PPEGMA) polymacromonomer chains, which are coupled to poly(methyl methacrylate) (PMMA) outer segments were synthesized by the combination of quasiliving carbocationic polymerization and atom transfer radical polymerization (ATRP). First, a bifunctional PIB macroinitiator was prepared by quasiliving carbocationic polymerization and subsequent quantitative chain end derivatizations. Quasiliving ATRP of PEGMAs with different molecular weights (M_n = 188, 300 and 475 g/mol) led to triblock copolymers which were further reacted with MMA under ATRP conditions to obtain PMMA-PPEGMA-PIB-PPEGMA-PMMA ABCBA-type pentablock copolymers. It was found that slow initiation takes place between the PIB macroinitiator and PEGMA macromonomers with higher molecular weights via ATRP. ATRP of MMA with the resulting block copolymers composed of PIB and PPEGMA chain segments led to the desired block copolymers with high initiating efficiency. Investigations of the resulting pentablock copolymers by DSC, SAXS and phase mode AFM revealed that nanophase separation occurs in these new macromolecular structures with average domain distances of 11-14 nm, and local lamellar self-assembly takes place in the pentablocks with PPEGMA polymacromonomer segments of PEGMAs with M_n of 118 g/mol and 300 g/mol, while disordered nanophases are observed in the block copolymer with PEGMA having molecular weight of 475 g/mol. These new amphiphilic block copolymers composed of biocompatible chain segments can find applications in a variety of advanced fields.     

Thermal and mechanical characterization of poly(vinyl chloride)-b-poly(butyl acrylate)-b-poly(vinyl chloride) obtained by single electron transfer - degenerative chain transfer living radical polymerization in water

This work reports the synthesis of several copolymers of poly(vinyl chloride)-b-poly(n-butyl acrylate)-b-Poly(vinyl chloride) prepared by single electron transfer/degenerative chain transfer mediated living radical polymerization (SET-DTLRP) in a two step process: first, a bifunctional macroinitiator of α,ω-di(iodo)poly(butyl acrylate) [α,ω-di(iodo)PBA] was synthesized by SET-DTLRP in water at 30 °C. The obtained macroinitiator was further reinitiated also by SET-DTLRP leading to the formation of the desired product. Several copolymers were synthesized in a 5L pilot reactor with different molecular weights and relative amounts of PBA and PVC. The possibility of synthesizing flexible materials made of PVC without using normal free plasticizes is extremely important for the industry. After processing the materials in a two-roll mill laboratorial equipment, the block copolymers were characterized concerning thermal and mechanical. The materials characterized in this study were prepared in a 5L pilot reactor under similar conditions to be used in industrial scale.     

Macromolecular Architecture Based on Anionically Prepared Poly(ethylene oxide) Macromonomers

Synthesis of poly(ethylene oxide) (PEO) macromonomers carrying a methacyloyl group in one end, and N, N-dimethyl amino, thiophene, styryl and vinyl ether functional groups in the other end was desribed. The general synthetic strategy is based on the living anionic polymerization of ethylene oxide initiated with functional potassium alcoholates, followed by reaction with methacyloyl chloride. These macromonomers were further utilized in various macromolecular architectures through via concurrent or selective thermal free radical, oxidative and photoinitiated free radical and cationic polymerization methods. The use of this synthetic route to prepare graft copolymers possessing completly and perfectly alternating PEO side chains using charge-transfer-complex polymerization was also demonstrated.     

Synthesis of well-defined ABC triblock copolymers with polypeptide segments by ATRP and click reactions

Well-defined ABC block copolymers consisting of poly(ethylene oxide) monomethylene ether (MPEO) as A block, poly(styrene) (PS) as B block and poly(γ-benzyl-l-glutamate) (PBLG) as C block were synthesized by the combination of atom transfer radical polymerization (ATRP) and click reactions. The bromine-terminated diblock copolymer poly(ethylene oxide) monomethylene ether-block-poly(styrene) (MPEO-PS-Br) was prepared by ATRP of styrene initiated with macro-initiator MPEO-Br, which was prepared from the esterification of MPEO and 2-bromoisobutyryl bromide, and converted into the azido-terminated diblock copolymer MPEO-PS-N₃ by simple nucleophilic substitutions in DMF in the presence of sodium azide. Propargyl-terminated PBLGs were synthesized by ring-opening polymerization of γ-benzyl-l-glutamate-N-carboxyanhydride in DMF at room temperature using propargyl amine as an initiator. ABC triblock copolymers MPEO-PS-PBLG with a wide range of number-average molecular weights from 1.55 to 3.75 × 10⁴ and a narrow polydispersity from 1.07 to 1.10 were synthesized via the click reaction of MPEO-PS-N₃ and the propargyl-terminated PBLG in the presence of CuBr and 1,1,4,7,7-pentamethyldiethylenetriamine (PMDETA) catalyst system. The structures of these ABC block copolymers and corresponding precursors were characterized by NMR, IR and GPC. The results showed that click reaction was efficient. Therefore, a facile approach was offered to synthesize ABC triblock copolymers composed of crystallizable polymer MPEO, conventional vinylic polymer PS and rod-like α-helix polypeptide PBLG.