Unsaturation in binuclear cyclopentadienylchromium carbonyl thiocarbonyls: Viability of (η-C5H5)2Cr2(CS)2(CO)3 in contrast to (η-C5H5)2Cr2(CO)5

The cyclopentadienylchromium carbonyl thiocarbonyls Cp₂Cr₂(CS)₂(CO)_n (n = 4, 3, 2, 1) have been studied by density functional theory using the B3LYP and BP86 functionals. The lowest energy Cp₂Cr₂(CS)₂(CO)₄ structure can be derived from the experimentally characterized unbridged Cp₂Cr₂(CO)₆ structure by replacing the two terminal carbonyl groups furthest from the Cr-Cr bond with two terminal CS groups. The two lowest energy Cp₂Cr₂(CS)₂(CO)₃ structures have a single four-electron donor η²-μ-CS group and a formal Cr-Cr single bond of length ∼3.1 Å. In contrast to the carbonyl analogue Cp₂Cr₂(CO)₅ these Cp₂Cr₂(CS)₂(CO)₃ structures are viable with respect to disproportionation into Cp₂Cr₂(CS)₂(CO)₄ and Cp₂Cr₂(CS)₂(CO)₂ and thus are promising synthetic targets. The lowest energy Cp₂Cr₂(CS)₂(CO)₂ structures have all two-electron donor CO and CS groups and short CrCr distances around ∼2.3 Å suggesting the formal triple bonds required to give the chromium atoms the favored 18-electron configurations. These Cp₂Cr₂(CS)₂(CO)₂ structures are closely related to the known structure for Cp₂Cr₂(CO)₄. In addition, several doubly bridged structures with four-electron donor η²-μ-CS bridges are found for Cp₂Cr₂(CS)₂(CO)₂ at higher energies. The global minimum Cp₂Cr₂(CS)₂(CO) structure is a triply bridged triplet with a CrCr triple bond (2.299 Å by BP86). A higher energy singlet Cp₂Cr₂(CS)₂(CO) structure has a shorter Cr-Cr distance of 2.197 Å (BP86) suggesting the formal quadruple bond required to give each chromium atom the favored 18-electron configuration.     

Reactions of diferrocenyl dichalcogenides with [W(CO)5(THF)]: X-ray crystal structures of Fc2Te2 and [W2(μ-SeFc)2(CO)8] (Fc = [Fe(η-C5H5)(η-C5H4)])

Treatment of [W(CO)₅THF] with diferrocenyl diselenide, Fc₂Se₂, yielded the novel metal-metal bonded tungsten(I) complex, [W₂(μ-SeFc)₂(CO)₈] (1: Fc = ferrocenyl, [Fe(η⁵-C₅H₅)(η⁵-C₅H₄)]), which was characterised by NMR and IR spectroscopy, mass spectrometry, and X-ray crystallography. The corresponding tellurium derivative could not be prepared by an analogous route. The X-ray crystal structure of Fc₂Te₂ has also been determined.     

New ferrocenylmethylphosphines - Preparation, characterisation and coordination chemistry of PH(CH2Fc)2, P(CH2Fc)3 [Fc = Fe(η-C5H5)(η-C5H4)] and their derivatives

The new ferrocenylmethylphosphines PH(CH₂Fc)₂ (1) [Fc = Fe(η⁵-C₅H₅)(η⁵-C₅H₄)] and P(CH₂Fc)₃ (2) and the phosphonium salt [P(CH₂Fc)₃(CH₂OH)]I (3) were synthesised from P(CH₂OH)₃ and [FcCH₂NMe₃]I. [P(CH₂Fc)(CH₂OH)₃]Cl (4) was obtained from P(CH₂Fc)(CH₂OH)₂, CH₂O and HCl. The new phosphines and phosphonium salts were fully characterised by NMR and IR spectroscopy and MS. [Mo(CO)₆] reacts with 1 to give [Mo(CO)₅{PH(CH₂Fc)₂}] (5) in high yield, but attempts to employ 2 as a ligand failed. The reaction of [P(CH₂Fc)₃(CH₂OH)]I (3) and [PH(CH₂Fc)₃]I (obtained in situ from 3 and Na₂S₂O₅) with [WI₂(CO)₃(NCMe)₂] gave the complex salts [P(CH₂Fc)₃(CH₂OH)][WI₃(CO)₄] (6) and [PH(CH₂Fc)₃][WI₃(CO)₄] (7), respectively. [P(CH₂Fc)₄]I (8) was synthesized from PH₂CH₂Fc and [FcCH₂NMe₃]I. Crystal structures were obtained for 1, 3-8.     

Facile synthesis and X-ray structures of (η-C5Me5)Ti(OAr)3 (OAr = OC6F5, OCH2C6F5, and OCH2C6F2H3)

New half-sandwich titanocene complexes (η⁵-C₅Me₅)Ti(OC₆F₅)₃ (1), (η⁵-C₅Me₅)Ti(OCH₂C₆F₅)₃ (2), and (η⁵-C₅Me₅)Ti(OCH₂C₆F₂H₃)₃ (3) were synthesized via the displacement of methoxide ligands in (η⁵-C₅Me₅)Ti(OMe)₃ by the corresponding aryloxy or benzyloxy ligands. These compounds have been fully characterized by various spectroscopic methods including X-ray crystallography. Compound 1 has a distorted three-legged piano stool structure. However, complexes 2 and 3 have the chariot-like structure, where chariot means a two-wheeled horse-drawn vehicle. The π electron donation of oxygen atom to Ti center in complexes 1-3 is considerable.     

Synthesis and reactivity of asymmetrically substituted ansa-bridged zirconocene complexes: X-ray crystal structures of [Zr{R(H)C(η-C5Me4)(η-C5H4)}Cl2] (R = Bu, Bu) and [Zr{Bu(H)C(η-C5Me4)(η-C5H4)}(CH2Ph)2]

The dialkyl complexes, (R = Prⁱ, R′ = Me (2a), CH₂Ph (3a); R = Buⁿ, R′ = Me (2b), CH₂Ph (3b); R = Bu^t, R′ = Me (2c), CH₂Ph (3c); R = Ph, R′ = Me (2d), CH₂Ph (3d)), have been synthesized by the reaction of the ansa-metallocene dichloride complex, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (R = Prⁱ (1a), Buⁿ (1b), Bu^t (1c), Ph (1d)), and two molar equivalents of the alkyl Gringard reagent. The insertion reaction of the isocyanide reagent, CNC₆H₃Me₂-2,6, into the zirconium-carbon σ-bond of 2 gave the corresponding η²-iminoacyl derivatives, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}{η²-MeCNC₆H₃Me₂-2,6}Me] (R = Prⁱ (4a), Buⁿ (4b), Bu^t (4c), Ph (4d)). The molecular structures of 1b, 1c and 3b have been determined by single-crystal X-ray diffraction studies.     

Synthesis, structure and electrochemistry of CO incorporated diruthenium metallacyclic compounds [Ru2(CO)6{μ-η:η:η:η-1,4-Fc2C5H2O}] and [Ru2(CO)6{μ-η:η:η:η-1,5-Fc2C5H2O}]

Ferrocenyl substituted ruthenium metallacyclic compounds, [Ru₂(CO)₆{μ-η¹:η¹:η²:η²-1,4-Fc₂C₅H₂O}] (1) and [Ru₂(CO)₆{μ-η¹:η¹:η²:η²-1,5-Fc₂C₅H₂O}] (2) have been synthesized and structurally characterized. Electrochemical studies for 1 and 2 and the respective quinone derivatives 3 and 4 show weak to no electrochemical coupling at the mixed-valent intermediate state which is dependent on the complex frameworks.     

Cyclopentadienyl chromium and tungsten complexes with halide, methyl and σ-phenylethynyl ligands: Structures of (η-C5H5)Cr(NO)2(-CC-C6H5), (η-C5H5)Cr(NO)2I and [(η-C5H4)-COOCH3]W(CO)3Cl

With copper(I) iodide as catalyst, σ-alkynyls, compounds (η⁵-C₅H₅)Cr(NO)₂(CC-C₆H₅) (5), [(η⁵-C₅H₄)-COOCH₃]Cr(NO)₂(CC-C₆H₅) (10), and [(η⁵-C₅H₄)-COOCH₃]W(CO)₃(CC-C₆H₅) (13), were prepared from their corresponding metal chloride 1, 6 and 12. Structures of compound 3, 5 and 12 have been solved by X-ray diffraction studies. In the case of 5, there is an internal mirror plane passing through the phenylethynyl ligand and bisecting the Cp ring. The phenyl group is oriented perpendicularly to the Cp with an eclipsed conformation. The twist angle is 0° and 118.4° for -CC-Ph and two NO ligands, respectively. The orientation is rationalized in terms of orbital overlap between ψ₃ of Cp, dπ of Cr atom, and π^∗ of alkynyl ligand, and complemented by molecular orbital calculation. The opposite correlation was observed on the chemical shift assignments of C(2)-C(5) on Cp ring in compounds 6 and 12, using HetCOR NMR spectroscopy. The electron density distribution in the cyclopentadienyl ring is discussed on the basis of ¹³C NMR data and compared with the calculations via density functional B3LYP correlation-exchange method.     

配合物{(n-Bu)2Sn[(η5-C5H5)Fe(η5-C5H4)COO]2}2的合成、谱学表征及晶体结构

合成了新型配合物{(n-Bu)₂Sn[(η⁵-C₅H₅)Fe(η⁵-C₅H₄)COO]₂}₂，用元素分析、红外光谱和核磁共振谱( ¹H、¹³C、¹¹⁹Sn)进行了表征，并用X-射线单晶衍射分析法测定其晶体结构。晶体属单斜晶系，空间群P2₁/c，晶胞参数a=11.753(4)?，b=21.133(7)?，c=23.374(9)?，β=101.62(3)°，V=5687(4)?³，Z=4，D_c=1.614Mg·m^-3，μ(MoKα)=1.912mm^-1，F(000)=2800，最终可靠因子R₁=0.0827，wR₂=0.2085。配合物分子呈中心对称，是具有Sn₂O₂中心内环的二聚体结构;每个锡原子与5个O原子和2个C原子形成扭曲的五角双锥几何构型，其中5个O原子为赤道配位原子，而C-Sn-C为配合物的轴。     

Syntheses, structures, and dynamic properties of M(CO)2(η-C3H5)(en)(X) (M = Mo, W; X = Br, N3, CN) and [(en)(η-C3H5)(CO)2M(μ-CN)M(CO)2(η-C3H5)(en)]Br (M = Mo, W)

Mononuclear compounds M(CO)₂(η³-C₃H₅)(en)(X) (X = Br, M = Mo(1), W(2); X = N₃, M = Mo(3), W(4); X = CN, M = Mo(5), W(6)) and cyanide-bridged bimetallic compounds [(en)(η³-C₃H₅)(CO)₂M(μ-CN)M(CO)₂(η³-C₃H₅)(en)]Br (M = Mo (7), W(8)) were prepared and characterized. These compounds are fluxional and display broad unresolved proton NMR signals at room temperature. Compounds 1-6 were characterized by NMR spectroscopy at −60 °C, which revealed isomers in solution. The major isomers of 1-4 adopt an asymmetric endo-conformation, while those of 5 and 6 were both found to possess a symmetric endo-conformation. The single crystal X-ray structures of 1-6 are consistent with the structures of the major isomer in solution at low temperature. In contrast to mononuclear terminal cyanide compounds 5 and 6, cyanide-bridged compounds 7 and 8 were found to adopt the asymmetric endo-conformation in the solid state.     

Protonation of the lithio derivatives of the 1,2,4-tri-phosphaferrocenes, [LiFe(η-P2C2Bu2PBu)(η-C5R5)] (R = H, Me): Crystal and molecular structure of [Fe(η-P3C2Bu2BuH)(η-C5Me5)]

A new synthetic route is described to generate the 4-centre-5 electron donor ring system (P₃C₂^tBu₂BuH), via protonation of the lithium salts [LiFe(η⁴-P₂C₂^tBu₂PBu)(η⁵-C₅R₅)] (R = H, Me). The molecular structure of [Fe(η⁴-P₃C₂^tBu₂BuH)(η⁵-C₅R₅)] (R = Me) has been determined by a single crystal X-ray study.     

Palladium (II) complexes with mono-oxide 1,1′-bis(diphenylphosphino)metallocene ligands [Fe(η-C5Me4PPh2)(η-C5Me4P{O}Ph2)] and [Os(η-C5H4PPh2)(η-C5H4P{O}Ph2)]

The monoxides [Fe(η⁵-C₅Me₄PPh₂)(η⁵-C₅Me₄P{O}Ph₂)] (1) and [Os(η⁵-C₅H₄PPh₂)(η⁵-C₅H₄P{O}Ph₂)] (2) have been prepared by treatment of the corresponding diphosphines with CCl₄ and methanol.These ligands react with [Pd(PhCN)₂Cl₂] to give dichloride complexes of different structure.The dimeric complex [{Os(η⁵-C₅H₄PPh₂)(η⁵-C₅H₄P{O}Ph₂)}PdCl(μ-Cl)]₂ (4) contains the monodentate P-coordinated osmocene ligand with the free P{O}Ph₂ group, while the octamethylferrocene ligand gives the chelate k²-P,O complex [{Fe(η⁵-C₅Me₄PPh₂)(η⁵-C₅Me₄P{O}Ph₂)}PdCl₂] (3).The structures of 3 and 4 have been determined crystallographically.Treatment of 3 and 4 with silver salts in CH₂Cl₂ or acetonitrile leads to the corresponding dicationic complexes[{M(η⁵-C₅R₄PPh₂)(η⁵-C₅R₄P{O}Ph₂)}Pd(MeCN)_x]²⁺ (5, M = Fe, R = Me; 6, M = Os, R = H). Complex 5 decomposes upon isolation, in contrast 6 is rather stable, probably due to Os-Pd bonding. The dichlorides 3 and 4 catalyze catalytic amination of p-bromotoluene with N-(4-tolyl)morpholine with lower activity than (dppf)PdCl₂, however they perform comparable to (dppf)PdCl₂ activity in coupling of p-bromotoluene with p-methoxyphenyl boronic acid.     

Reactions of a phosphido-bridged unsymmetrical diiron complex (η-C5Me5)Fe2(CO)4(μ-CO)(μ-PPh2) with various alkynes

A phosphido-bridged unsymmetrical diiron complex (η⁵-C₅Me₅)Fe₂(CO)₄(μ-CO)(μ-PPh₂) (1) was synthesized by a new convenient method; photo-dissociation of a CO ligand from (η⁵-C₅Me₅)Fe₂(CO)₆(μ-PPh₂) (2) that was prepared by the reaction of Li[Fe(CO)₄PPh₂] with (η⁵-C₅Me₅)Fe(CO)₂I. The reactivity of 1 toward various alkynes was studied. The reaction of 1 with ^tBuCCH gave a 1:1 mixture of two isomeric complexes (η⁵-C₅Me₅)Fe₂(CO)₃(μ-PPh₂)[μ-CHC(^tBu)C(O)] (3) containing a ketoalkenyl ligand. The reactions of 1 with other terminal alkynes RCCH (R=H, CO₂Me, Ph) afforded complexes incorporating one or two molecules of alkynes and a carbonyl group. The principal products were dinuclear complexes bridged by a new phosphinoketoalkenyl ligand, (η⁵-C₅Me₅)Fe₂(CO)₃(μ-CO)[μ-CR¹CR²C(O)PPh₂] (4a: R¹=H, R²=H; 4b: R¹=CO₂Me, R²=H; 4c: R¹=H, R²=Ph). In the cases of alkynes RCCH (R=H, CO₂Me), dinuclear complexes having a new ligand composed of two molecules of alkynes, a carbonyl group, and a phosphido group; i.e. (η⁵-C₅Me₅)Fe₂(CO)₃[μ-CRCHCHCRC(O)PPh₂] (5a: R=H; 5b: R=CO₂Me), were also obtained. In all cases, mononuclear complexes, (η⁵-C₅Me₅)Fe(CO)[CR¹CR²C(O)PPh₂] (6a: R¹=H, R²=H; 6b: R¹=H, R²=CO₂Me; 6c: R¹=H, R²=Ph) were isolated in low yields. The structures of 1, 4c, 5b, and 6a were confirmed by X-ray crystallography. The detailed structures of the products and plausible reaction mechanisms are discussed.     

Transformation of C2 units on a bimetallic tetranuclear cluster.: Reactivity of [Ru3Mo(μ3-η-CC)(μ-CO)3(CO)2(η-C5H4R)3(η-C5H5)] (R = H, Me)

The reactivity of [Ru₃Mo(μ₄-η²-CC)(μ-CO)₃(CO)₂(η-C₅H₄R)₃(η-C₅H₅)] (R = H; Me) have been investigated, initially to elucidate the nature of the starting material, and, latterly, to define the reactivity of an interesting ethane-1,2-bis(ylidyne) species. While the mixed RuMo clusters were unreactive towards simple electrophiles and carbonyl substitution by phosphine ligands they did react with atmospheric oxygen or carbon monoxide to give substantially different products. In all instances oxygen was incorporated either at the metal centre or at the C₂ fragment. High-pressure carbonylations yielded [Ru₃(μ-CO)₃(η-C₅H₅)₃(μ₃-C-C(O)O{Ru(CO)₂(η-C₅H₅)})] and [{Ru₂(μ-CO)(CO)₂(η-C₅H₄Me)₂}(μ₄-η²-CC){Ru(CO)(η-C₅H₄Me)Mo(η-C₅H₅)(=O)(μ-O)}], an ethane-1,2-bis(ylidene) complex, this exemplifying a relatively rare raft geometry which further reacted with Cl₂CCCl₂ to give [Mo₃(μ₄-C₂(Ru(CO)₂(η-C₅H₄Me))(CO)(μ-CO)(η-C₅H₅)₃(Cl)₂] having a similar geometry and undergone halogenation. In order to extend the extant examples of these raft clusters we explored the reaction of [{Ru(CO)₂(η-C₅H₄R)₂}₂(μ-C₂)] with [{Ru(CO)₂(η-C₅H₅)₂}₂] to provide a rational synthetic pathway leading to very reactive [Ru(μ₄-η²-CC)(μ₂-CO)₂(CO)₄(η-C₅H₄Me)₂(η-C₅H₄R)₂] rafts.     

Stable radical adducts of diisopropylphosphoryl radicals with fullerene complexes (η2-C60)Os(CO)(PPh3)2(CNBut) and (η2-C70)Os(CO)(PPh3)2(CNBut)

It was determined by ESR spectroscopy that the UV irradiation of toluene solutions containing Hg[P(O)(OPrⁱ)₂ and the complex (²-C₆₀)Os(CO)(PPh₃)₂(CNBu^t) produces six stable regioisomeric adducts of phosphoryl radicals with complexes, which are not demetallated under UV irradiation and do not dimerize in the absence of UV irradiation. This is caused by the addition of the phosphoryl radicals to the carbon atoms of fullerene localized near the metal-containing moiety. The addition of the phosphoryl radicals to (²-C₇₀)Os(CO)(PPh₃)₂(CNBu^t) gives rise to the formation of nine stable regioisomeric radical adducts. A comparison of the composition of regioisomers of the radical adducts of C₇₀ with the phosphoryl radicals, which were formed directly from C₇₀ and from the radical adducts of ²-C₇₀)Os(CO)(PPh₃)₂(CNBu^t) by the demetallation of the latter, revealed an orienting effect of the osmium-containing moiety on the addition of the phosphoryl radicals to the fullerene complex.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1968–1972, September, 2004.     

Synthesis and X-ray investigation of novel Fe and Mn phenyltellurenyl-halide complexes: (CO)3FeBr2(PhTeBr), (η-C5H5)Fe(CO)2(PhTeI2) and CpMn(CO)2(PhTeI)

New complexes of transition metals with organotellurium halide ligands are reported. Iodination of [CpMn(CO)₂]₂(μ-Ph₂Te₂) leads to the Te-Te bond cleavage and formation of CpMn(CO)₂(PhTeI). Oxidative addition of PhTeBr₃ to Fe(CO)₅ gives the monomeric complex (CO)₃FeBr₂(PhTeBr) which is isostructural with the recently reported (CO)₃FeI₂(PhTeI). Insertion of phenyltellurenyl iodide (PhTeI) into the Fe-I bond of CpFe(CO)₂I forms CpFe(CO)₂(TeI₂Ph). Molecular structures of the reported complexes were determined by single-crystal X-ray diffraction analysis (XRD). A considerable shortening of metal-tellurium distances is observed.     

Derivatisation of boryl substituted titanium half-sandwich complexes - Molecular structures of [Ti{(η-C5H4)B(NiPr2)N(H)tBu}Cl2(NMe2)] and [{TiCl2(μ-{OB(NHMe2)-η-C5H4})}2-μ-O]

The half-sandwich complex [Ti{(η⁵-C₅H₄)B(NiPr₂)N(H)iPr}(NMe₂)₃] (6) was prepared from (η¹-C₅H₅)B(NiPr₂)N(H)iPr (5) and [Ti(NMe₂)₄] with cleavage of one equivalent of HNMe₂ and further converted into the corresponding constrained geometry complex [Ti{(η⁵-C₅H₄)B(NiPr₂)NiPr}(NMe₂)₂] (7) by elimination of a second equivalent of HNMe₂. Reaction of the half-sandwich complexes [Ti{(η⁵-C₅H₄)B(NiPr₂)N(H)R}(NMe₂)₃] (R = iPr, tBu) with excess Me₃SiCl yielded the corresponding dichloro complexes [Ti{(η⁵-C₅H₄)B(NiPr₂)N(H)R}Cl₂(NMe₂)] (R = tBu (10), iPr (11)). The intermediate species [Ti{(η⁵-C₅H₄)B(NiPr₂)N(H)iPr}Cl(NMe₂)₂] (9) could also be spectroscopically characterised. Partial hydrolysis of 10 and 11, respectively, resulted in formation of [{TiCl₂(μ-{OB(NHMe₂)-η⁵-C₅H₄})}₂-μ-O] (12). The molecular structures of 10 and 12 have been determined by X-ray crystallographic analyses. Complex 10, when activated with MAO, was found to be a highly active styrene polymerisation catalyst while being inactive towards the polymerisation of ethylene.     

Hydrogenation of cyclohexene catalyzed by ruthenium nitrosyl complexes: Crystal structures of catalyst precursors [CpRu(μ2-NO)2RuCp] and [CpRu(NO)(η-C6H10)] (Cp = η-C5(CH3)5)

Hydrogenation of cyclohexene with 0.1 mol% of the (nitrosyl)ruthenium catalyst [Cp^∗Ru(NO)(C₆H₅)₂] (1; Cp^∗ = η⁵-C₅(CH₃)₅) under 1.0 MPa of H₂ in water at 90 °C for 13 h afforded cyclohexane in 94% yield. The nitrosyl-bridged dinuclear complex [Cp^∗Ru(μ₂-NO)₂RuCp^∗] (2) and the mononuclear cyclohexene complex [Cp^∗Ru(NO)(η²-C₆H₁₀)] (3), which also serve as catalyst precursors, have been obtained from the reaction mixture. X-ray crystallographic analyses of 2 and 3 have revealed that the bridging nitrosyl ligands in 2 form an almost planar Ru₂N₂ four-membered ring with the Ru–Ru distance of 2.5366(5) Å, whereas the nitrosyl ligand in 3 is linear. On the other hand, a ruthenium complex without a nitrosyl ligand [Cp^∗Ru(CH₃CN)₃][OSO₂CF₃] proved to be less effective for this hydrogenation.     

Atom-transfer radical reactions catalyzed by a coordinatively unsaturated diruthenium amidinate, [(η-C5Me5)Ru(μ2-i-PrNC(Me)Ni-Pr)Ru(η-C5Me5)]

Atom-transfer radical cyclization (ATRC) and addition (ATRA) catalyzed by a coordinatively unsaturated diruthenium amidinate complex 4, [(η⁵-C₅Me₅)Ru(μ₂-i-PrNC(Me)Ni-Pr)Ru(η⁵-C₅Me₅)]⁺, are investigated, and their features are compared with those of atom-transfer radical polymerization (ATRP). As an example of ATRC, a cationic diruthenium amidinate 4 is found to exhibit excellent catalytic reactivity for the cyclization of N-allyl α-halogenated acetamides including an alkaloid skeleton at ambient temperature. A catalytic species generated in situ from a halide complex, (η⁵-C₅Me₅)Ru(μ₂-i-PrNC(Me)Ni-Pr)Ru(η⁵-C₅Me₅)(X) [X=Cl, Br] and sodium salts of weakly coordinating anions such as NaPF₆ and NaBPh₄ also shows high catalytic activity; this actually provides a solution for a problematic instability of 4 as the practical catalyst. The in situ-generated catalyst species 4 is also active towards the intermolecular ATRA of α,α,γ-trichlorinated γ-lactam with alkenes at rt to afford the corresponding α-alkylated γ-lactams in moderate yields. Examination of ATRP of methyl methacrylate (MMA) showed that both the isolated 4 [Y=PF₆] and in situ-generated 4 [Y=PF₆] are effective for the polymerization of MMA in the presence of 2-bromoisobutylate as the initiator. Use of the isolated catalyst results in controlled polymerization at initial stage of the reaction; in contrast, the polymerization with in situ-generated catalyst produces poly(MMA) with wide molecular weight distribution. The isolated catalyst 4 is powerful for the activation of a C-Br bond of macromolecule initiators; BrCMe₂CO₂[O(CH₂)₄]_n-n-Bu (M_n=3800; M_w/M_n=1.2) initiated ATRP of MMA even at 25 °C to afford the poly(THF)-poly(MMA) block copolymer of M_n=26,000 and M_w/M_n=1.2 with the aid of 4. The roles of the coordinatively unsaturated ruthenium species for these reactions are discussed.     

A synthetic, structural and reactivity study of [(η-C4R4)Co(η-C5H4X)] complexes, R = Me or Et; X = CHO, CHCHFc, CHCH(η-C5H4)Co(η-C4Ph4), CHC(CN)2: Unexpected formation of [(η-cyclopentadienyl)(η-3,4,5,6-tetraethyl-α-pyrone)cobalt]

The tetraethyl- and tetramethyl-cyclobutadiene complexes [(η⁴-C₄R₄)Co(η⁵-C₅H₄CHO)] R = Et, 5, R = Me, 7, and [(η⁴-C₄R₄)Co(η⁵-C₅H₄CO₂Me)] R = Et, 6, R = Me, 8, are conveniently prepared by photolysis of the corresponding isocobaltocenium cations [(η⁴-C₄R₄)Co(η⁶-C₆H₅Me)]⁺ in acetonitrile, and subsequent treatment with Na[C₅H₄CHO] or Na[C₅H₄CO₂Me]. The aldehydes 5 and 7 undergo Wittig and Knoevenagel reactions with [FcCH₂PPh₃]I and CH₂(CN)₂, to form [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH=CHFc)] and [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH=C(CN)₂], 11 and 15, respectively. The Horner-Wittig reaction of [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH₂P(O)(OEt)₂] with [(η⁴-C₄Ph₄)Co(η⁵-C₅H₄CHO)] yields [(η⁴-C₄R₄)Co(η⁵:η⁵-C₅H₄CHCH-C₅H₄)Co(η⁴-C₄Ph₄)], 12 and 13. [(η⁴-C₄Me₄)Co(η⁵-C₅H₄CHO)] also reacts with t-BuLi and FcLi to furnish the corresponding secondary alcohols, 16 and 17, respectively. Surprisingly, the attempted direct synthesis of 5 by reaction of Na[C₅H₅] and ethyl formate with [(η⁴-C₄Et₄)Co(CO)₂I], 1, instead yielded [(η⁵-C₅H₅)Co(η⁴-3,4,5,6-tetraethyl-α-pyrone)], 18, and a mechanistic proposal is advanced. The X-ray crystal structures of 1, 7, 8, 11(Z), 15 and 18, and also the isocobaltocenium salts [(η⁴-C₄Et₄)Co(η⁶-C₆H₅Me)][PF₆], 2, and [(η⁴-C₄Et₄)Co(η⁶-1,3,5-C₆H₃Me₃)][PF₆], 4, are reported.     

Cyclopalladation of N-phenyl-4-ferrocenylmethylpyrazoles: Crystal structure of [Pd{κ-C,N-C6H4-1-[(3,5-Me2-C3N2)-CH2-(η-C5H4)Fe(η-C5H5)]}Cl(PPh3)] · CH2Cl2

The synthesis and characterization of pyrazole derivatives of general formula [C₆H₄-4-R-1-{(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)}] [R = OMe (1a) or H (1b)] with a ferrocenylmethyl substituent are described.The study of the reactivity of compounds 1 with palladium(II) acetate has allowed the isolation of complexes (μ-AcO)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (2) [R = OMe (2a) or H (2b)] that contain a bidentate [C(sp², phenyl), N]⁻ ligand and a central “Pd(μ-AcO)₂Pd” unit.Furthermore, treatment of 2 with LiCl produced complexes (μ-Cl)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (3) [R = OMe (3a) or H (3b)] that arise from the replacement of the acetato ligands by the Cl⁻.Compounds 2 and 3 also react with PPh₃ giving the monomeric complexes [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}X(PPh₃)] {X⁻ = AcO⁻ and R = OMe (5a) or H (5b) or X⁻ = Cl⁻ and R = OMe (6a) or H (6b)}, where the phosphine is in a cis-arrangement to the metallated carbon atom. Treatment of 3 with thallium(I) acetylacetonate produced [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}(acac)] (7) [R = OMe (7a) or H (7b)]. Electrochemical studies of the free ligands and the cyclopalladated complexes are also reported. The dimeric complexes 3 also react with MeO₂C-CC-CO₂Me (in a 1:4 molar ratio) giving [Pd{(MeO₂C-CC-CO₂Me)₂C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}Cl] (8) [R = OMe (8a) or H (8b)], which arise from the bis(insertion) of the alkyne into the σ{Pd-C(sp², phenyl)} bond of 3.