Sequential Voltammetric Determination of Ultratrace Osmium,Ruthenium and Iridium. Application to Superficial Water

The present work, regarding the determination of ultratrace Os(VIII), Ru(III) and Ir(III) in superficial waters is an interesting example of the possibility to simultaneously, or better sequentially determine each single element in real samples by voltammetry. The method is based on the catalytic current of the Os(VIII)‐ and Ru(III)‐bromate systems by square wave voltammetry and on the Ir(III) determination by square wave catalytic adsorptive stripping voltammetry. 0.5 mol L^?1 acetate buffer pH 4.9+7.7×10^?2 mol L^?1 NaBrO₃ and 0.5 mol L^?1 acetate buffer pH 4.9+7.7×10^?2 mol L^?1 NaBrO₃+2.3×10^?5 mol L^?1 cetyltrimethylammonium bromide (CTAB) +0.2 mol L^?1 KCl were employed as the supporting electrolytes. The analytical procedure was verified by the analysis of the standard reference materials: Sea Water BCR‐CRM 403 and Fresh Water NIST‐SRM 1643d. For all the elements, the accuracy, expressed as relative error e (%), was satisfactory, being lower than 6 %, while precision as repeatability, expressed as relative standard deviation, s_r (%), was generally lower than 5 %. Once set up on the standard reference materials, the analytical procedure was transferred and applied to superficial water sampled in proximity to superhighway and in the Po river mouth area.     

Highly sensitive adsorptive stripping voltammetric method for the ultra-trace determination of chromium(VI).

A rapid differential pulse adsorptive stripping voltammetric method has been developed for the ultra-trace determination of chromium using 2,2'-bipyridine. The base electrolyte used is 0.1 M NH4Cl (pH 6.0). The peak current was found to increase substantially with the addition of nitrite ions. A well-defined peak was observed at -1.3 V. Parameters, like concentration of the ligand, concentration of nitrite ion, accumulation potential, accumulation time, rest period, drop size, scan rate, pulse amplitude etc. have been optimized. Under the optimum conditions, the 3 sigma detection limit was found to be 0.02 ppb (3.8 x 10(-10) M). The method is highly selective and sensitive, and has been applied to the determination of Cr(VI) in spiked water, effluents and ore samples.     

Adsorptive stripping voltammetric determination of antimony

A new method is described for the determination of antimony based on the cathodic adsorptive stripping of Sb(III) complexed with 2′,3,4′,5,7-pentahydroxyflavone(morin) at a static mercury drop electrode (SMDE). The reduction current of the adsorbed antimony complex was measured by 1.5th-order derivative linear-sweep adsorption voltammetry. The peak potential is at −0.51 V (vs. SCE). The effects of various parameters on the response are discussed. The optimized analytical conditions were found to be: supporting electrolyte, chloroacetic acid (0.04 mol/l, pH 2.3); concentration of morin, 5×10⁻⁶ mol/l; accumulation potential, −0.25 V (vs. SCE); scan rate, 100 mV/s. The limit of detection and the linear range were 7×10⁻¹⁰ mol/l and 1.0×10⁻⁹3.0×10⁻⁷ mol/l Sb(III) for a 2-min accumulation time, respectively. This method has been applied to the determination of Sb(III) in steel and brass samples and satisfactory results were obtained. The adsorptive voltammetric characteristics and composition of the Sb(III)–morin complex were studied.     

Continuous flow and flow injection stripping voltammetric determination of silver(I), mercury(II), and bismuth(III) at a bulk modified graphite tube electrode

The epoxy-impregnated graphite tube electrode bulk modified with 2-mercaptobenzoxazole, employed in a wall-jet configuration, was found to be useful for the continuous flow and flow injection stripping voltammetric determinations of Ag^I, Hg^II and Bi^III. For continuous flow, detection limits for Ag^I, Hg^II and Bi^III were 1.8 × 10⁻¹⁰ M, 1.9 × 10⁻⁹ M and 9.5 × 10⁻⁹ M, respectively (10 min accumulation, S/N = 3). Precisions for 5.00 × 10⁻⁹ M Ag^I, 1.00 × 10⁻⁸ M Hg^II and 1.00 × 10⁻⁷ M Bi^III were 10.5%, 5.77 % and 7.90% (relative standard deviations, n = 6), respectively. In the case of flow injection stripping, with a 500 μL injection loop, detection limits of 0.59 ng, 2.0 ng and 120 ng were obtained for Ag^I, Hg^II and Bi^III, respectively (S/N = 3). Selected metal ions, inorganic and organic substances were investigated for interferences. The electrode was tested with a certified sample and then applied to the determinations of the metal ions in a urine and a sea-water sample.     

Differential pulse cathodic stripping adsorption voltammetric determination of trace amounts of lead using factorial design for optimization

A sensitive cathodic stripping voltammetric method is developed for determination of lead(II), with adsorptive collection of complexes with Pyrogallol red (PGR) on to a hanging mercury drop electrode. After accumulation of the complex at −0.80 V vs. Ag/AgCl reference electrode, the potential is scanned in a negative direction from −0.20 to −0.50 V with differential pulse method. Then the reduction peak current for the lead(II)-PGR complex is measured at −0.39 V. The influence of reagent and instrumental variables was completely studied by factorial design analysis. The optimum analytical conditions for the determination of lead(II) were established. Under optimum conditions, lead(II) determined in the range of 0.1-30.0 ng ml⁻¹ with a limit of detection of 0.06 ng ml⁻¹. The method is successfully applied to determination of lead(II) in water sample.     

Modification of catalytic adsorptive stripping voltammetric method of hexavalent chromium determination in the presence of DTPA and nitrate

The voltammetric procedure for determination of traces of Cr(VI) [Anal. Chim. Acta (1992) 262:103] was modified by changing the temperature of the measurements. It was found that at the temperature of 40 °C the time of decrease of the Cr(III) signal was shortened from 30 to 5 min. As a result the total analysis time was drastically shortened. The modified procedure does not show any disadvantage as compared to the original method. The results of Cr(VI) determination by the modified procedure are less affected by Cr(III) as compared to the original method. The detection limit of the method was 2.5 × 10^-11 mol L^-1 (1.2 ng L^-1). The validation of the modified procedure was performed by comparison of the results of analyses of tap and river water samples with those obtained using original procedure.     

Ruthenium(III) and iridium(III) complexes with nicotine

A new chloride-dimethylsulfoxide-ruthenium(III) complex with nicotine trans-[Ru^IIICl₄(DMSO)[H-(Nicotine)]] (1) and three related iridium(III) complexes; [H-(Nicotine)]trans-[Ir^IIICl₄(DMSO)₂] (2), trans-[Ir^IIICl₄(DMSO)[H-(Nicotine)]] (3) and mer-[Ir^IIICl₃(DMSO)(Nicotine)₂] (4) have been synthesized and characterized by spectroscopic techniques and by single crystal X-ray diffraction (1, 2, and 4). Protonated nicotine at pyrrolidine nitrogen is present in complexes 1 and 3 while two neutral nicotine ligands are observed in 4. In these three inner-sphere complexes coordination occurs through the pyridine nitrogen. Moreover, in the outer-sphere complex 2, an electrostatic interaction is observed between a cationic protonated nicotine at the pyrrolidine nitrogen and the anionic trans-[Ir^IIICl₄(DMSO)₂]^¯ complex.     

Highly efficient phosphorescent iridium (III) diazine complexes for OLEDs: Different photophysical property between iridium (III) pyrazine complex and iridium (III) pyrimidine complex

The synthesis and luminescence of four new iridium (III) diazine complexes (1-4) were investigated. HOMO and LUMO energy levels of the complexes were estimated according to the electrochemical performance and the UV-Vis absorption spectra, showing the pyrimidine complexes have a larger increase for the LUMO than the HOMO orbital in comparison with the pyrazine complexes. Several high-efficiency yellow and green OLEDs based on phosphorescent iridium (III) diazine complexes were obtained. The devices emitting yellow light based on 1 with turn-on voltage of 4.1 V exhibited an external quantum efficiency of 13.2% (power efficiency 20.3 lm/W), a maximum current efficiency of 37.3 cd/A. The electroluminescent performance for the green iridium pyrimidine complex of 3 is comparable to that of the iridium pyridine complex (PPY)₂Ir(acac) (PPY = 2-phenylpyridine), which is among the best reported.     

A catalytic adsorptive stripping voltammetric procedure for trace determination of Cr(VI) in natural samples containing high concentrations of humic substances

A simple and fast catalytic adsorptive stripping voltammetric procedure for trace determination of Cr(VI) in natural samples containing high concentrations of humic substances has been developed. The procedure for chromium determination in the presence of DTPA and nitrates was employed as the initial method. In order to enhance the selectivity vs. Cr(III) the measurements were performed at 40°C. Interference from dissolved organic matter such as humic and fulvic acids was drastically decreased by adding Amberlite XAD-7 resin to the voltammetric cell before the deaeration step. The whole procedure was applied to a single cell, which allowed monitoring of the voltammetric scan. Optimum conditions for removing humic and fulvic acids due to their adsorption on XAD-7 resin were evaluated. The use of XAD-7 resin also minimize interferences from various cationic, anionic, and nonionic surfactants. The calibration graph for Cr(VI) for an accumulation time of 30 s was linear in the range 5 × 10⁻¹⁰ to 5 × 10⁻⁸ mol L⁻¹. The relative standard deviation for determination of Cr(VI) at a concentration of 1 × 10⁻⁸ mol L⁻¹ was 3.5% (n = 5). The detection limit estimated from 3 times the standard deviation for low Cr(VI) concentrations and an accumulation time of 30 s was about 1.3 × 10⁻¹⁰ mol L⁻¹. The proposed method was successfully applied to Cr(VI) determination at trace levels in soil samples.     

Exploiting flow injection and sequential injection anodic stripping voltammetric systems for simultaneous determination of some metals

Flow injection (FI) and sequential injection (SI) systems with anodic stripping voltammetric detection have been exploited for simultaneous determination of some metals. A pre-plated mercury film on a glassy carbon disc electrode was used as a working electrode in both systems. The same film can be repeatedly applied for at least 50 analysis cycles, thus reducing the mercury consumption and waste. A single line FI voltammetric system using an acetate buffer as a carrier and an electrolyte solution was employed. An injected standard/sample zone was mixed with the buffer in a mixing coil before entering a flow cell. Metal ions were deposited on the working electrode by applying a potential of −1.1 V vs Ag/AgCl reference electrode. The stripping was performed by anodically scanning potential of working electrode to +0.25 V, resulting a voltammogram. Effects of acetate buffer concentration, flow rate and sample volume were investigated. Under the selected condition, detection limits of 1 μg l⁻¹ for Cd(II), 18 μg l⁻¹ for Cu(II), 2 μg l⁻¹ for Pb(II) and 17 μg l⁻¹ for Zn(II) with precisions of 2–5% (n=11) were obtained. The SI voltammetric system was similar to the FI system and using an acetate buffer as a carrier solution. The SI system was operated by a PC via in-house written software and employing an autotitrator as a syringe pump. Standard/sample was aspirated and the zone was then sent to a flow cell for measurement. Detection limits for Cd(II), Cu(II), Pb(II) and Zn(II) were 6, 3, 10 and 470 μg l⁻¹, respectively. Applications to water samples were demonstrated. A homemade UV-digester was used for removing organic matters in the wastewater samples prior to analysis by the proposed voltammetric systems.     

Anodic stripping voltammetric determination of bismuth(III) using a Tosflex-coated mercury film electrode

A Tosflex-mercury film electrode (TMFE) was prepared by spin-coating a solution of the perfluorinated anion exchange polymer Tosflex onto a glassy carbon electrode surface followed by electrodeposition of mercury film on this electrode. This electrode was used for the determination of trace bismuth(III) which was preconcentrated onto the TMFE as anionic bismuth(III) complexes with chloride in a chloride medium. The preconcentration was carried out at a potential of-0.2 V, and the preconcentration of the bismuth(III) was enhanced significantly by the anion-exchange feature of Tosflex. The accumulated bismuth(III) was then determined by anodic square-wave stripping voltammetry (SWSV). Various parameters influencing the determination of bismuth(III) were examined in detail. With 2 min accumulation, the analytical signal versus concentration dependence was linear up to 50 ppb, and the detection limit was 0.58 ppb. This modified electrode showed good resistance to the interferences from surface-active compounds and common ions.     

Iridium (III) and rhodium (III) triazoles by 1,3-dipolar cycloadditons to a coordinated azide in iridium (III) and rhodium (III) compounds

The reaction of [(η⁵-C₅Me₅)M(μCl)Cl]₂ with the ligand (L^∩L) in the presence of sodium methoxide yielded compounds of general formula [(η⁵-C₅Me₅)M(L^∩L)Cl] (1–10) (where M = Ir or Rh and L^∩L = N^∩O or O^∩O chelate ligands). Azido complexes of formulation [(η⁵-C₅Me₅)M(L^∩L)N₃] (11–20) have been prepared by the reaction of [(η⁵-C₅Me₅)M(μN₃)(X)]₂ (X = Cl or N₃) with the corresponding ligands or by the direct reaction of [(η⁵-C₅Me₅)M(L^∩L)Cl] with NaN₃. These azido complexes [(η⁵-C₅Me₅)M(L^∩L)N₃] undergo 1,3-dipolar cycloaddition reaction with substituted alkynes in CH₂Cl₂ and for the first time in ethanol at room temperature to yield iridium (III) and rhodium (III) triazoles (21–28). The compounds were characterized on the basis of spectroscopic data, and the molecular structures of 2 and 26 have been established by single crystal X-ray diffraction.     

Synthesis and characterization of half-sandwich iridium(III) and rhodium(III) complexes bearing organochalcogen ligands

Reactions of [Cp*M(μ-Cl)Cl]₂ (M = Ir, Rh; Cp* = η⁵-pentamethylcyclopentadienyl) with bi- or tri-dentate organochalcogen ligands Mbit (L1), Mbpit (L2), Mbbit (L3) and [Tm^Me]⁻ (L4) (Mbit = 1,1′-methylenebis(3-methyl-imidazole-2-thione); Mbpit = 1,1′-methylene bis (3-iso-propyl-imidazole-2-thione), Mbbit = 1,1′-methylene bis (3-tert-butyl-imidazole-2-thione)) and [Tm^Me]⁻ (Tm^Me = tris (2-mercapto-1-methylimidazolyl) borate) result in the formation of the 18-electron half-sandwich complexes [Cp*M(Mbit)Cl]Cl (M = Ir, 1a; M = Rh, 1b), [Cp*M(Mbpit)Cl]Cl (M = Ir, 2a; M = Rh, 2b), [Cp*M(Mbbit)Cl]Cl (M = Ir, 3a; M = Rh, 3b) and [Cp*M(Tm^Me)]Cl (M = Ir, 4a; M = Rh, 4b), respectively. All complexes have been characterized by elemental analysis, NMR and IR spectra. The molecular structures of 1a, 2b and 4a have been determined by X-ray crystallography.     

Solid-state electrochemiluminescence of a novel iridium（Ⅲ） complex

The solid-state ECL behavior of a water-insoluble bis-cyclometalated （pq）2Ir（N-phMA） complex is presented, in which pq is a 2-phenylquinoline anion and N-phMA is N-phenyl methacrylamide, a monoanionic bidentate ligand. The MWNTs/（pq）2Ir（N-phMA） film, MWNTs/Ru（bpy）3^2＋ film and （pq）2Ir（N-phMA） directly modified glassy carbon electrode were fabricated; only the MWNTs/（pq）2Ir（N-phMA） film can produce steady ECL in the presence of tri-n-propylamine as a coreactant.     

Ethylenediamine in the voltammetric determination of copper in sea water at a rotating mercury film electrode

The use of ethylenediamine in the voltammetric study of copper in natural sea water was evaluated for applicability with rotating thin mercury film electrodes. It was shown that this method increases the analytical sensitivity for copper at such electrodes by at least a factor of 4, and improves the detection of pH 8 labile copper.     

Synthesis and characterization of cyclometalated iridium(III) complexes containing pyrimidine-based ligands

New pyrimidine derivatives (pyr) have been synthesized using palladium-catalyzed Suzuki coupling reaction. These compounds can undergo cyclometalation with iridium trichloride to form bis-cyclometalated iridium complexes, (pyr)₂Ir(acac) (acac = acetylacetonate; pyr = cyclometalated pyr). The substituents at the both cyclometalated phenyl ring and pyrimidine ring were found to affect both electrochemical and photophysical properties of the complexes. Computation results on these complexes are consistent with the electrochemical and photophysical data. The complexes are green-emitting with good solution quantum yields at ∼0.30. Light-emitting devices using these complexes as dopants were fabricated, and the device performance at 100 mA/cm² are moderate: 9 (17 481 cd/m², 4.8%, 18 cd/A, 5.1 lm/W); 10 (18 704 cd/m², 4.9%, 18.9 cd/A, 4.7 lm/W); 13 (20 942 cd/m², 5.4%, 21.0 cd/A, 6.1 lm/W).     

Simultaneous square wave anodic stripping voltammetric determination of Cr, Pb, Sn, Sb, Cu, Zn in presence of reciprocal interference: application to meal matrices

An analytical procedure for simultaneously determining chromium(VI), lead(II), tin(II), antimony(III), copper(II) and zinc(II) by square wave anodic stripping voltammetry (SWASV) in matrices involved in foods and food chain as wholemeal, wheat and maize meal is described.The digestion of each matrix was carried out using a concentrated HCl–HNO₃–H₂SO₄ acidic attack mixture. Dibasic ammonium citrate buffer solution pH 6.5 was employed as the supporting electrolyte. The voltammetric measurements were carried out using, as working electrode, a stationary hanging mercury drop electrode (HMDE) and a platinum electrode and an AgAgClKCl_sat electrode as auxiliary and reference electrodes, respectively. The analytical procedure was verified by the analysis of the standard reference materials Wholemeal BCR-CRM 189, Wheat Flour NIST-SRM 1567a and Rice Flour NIST-SRM 1568a.For all the elements in the certified matrix, the precision as repeatability, expressed as relative standard deviation (s_r) was of the order of 3–5%. The accuracy, expressed as relative error (e) was generally of the order of 3–6%, while the detection limits were lower than 0.123 μg/g.In the presence of reciprocal interference, the standard addition method considerably improved the resolution of the voltammetric technique.Once set up on the standard reference materials, the analytical procedure was transferred and applied to commercial meals sampled on market for sale. A critical comparison with spectroscopic measurements is also discussed.     

Selective visible light reduction of carbon dioxide over iridium(III)-terpyridine photocatalysts

The CO₂ reduction reaction is an imperative piece of technology that closes the carbon cycle in many critical energy conversion and chemical manufacturing processes. Here, we report two new iridium (III) terpyridine-based photocatalysts capable of selective reduction of CO₂ to CO under visible light (λ ≥ 420 nm). The first photocatalyst, [Ir–COOH], was functionalized with the carboxyl group on the phenylpyridine, whereas the second, [Ir-PhCOOH], was attached to a phenyl spacer on the terpyridine. The [Ir-PhCOOH] was characterized by a higher extinction coefficient than [Ir–COOH], thus allowing more absorption of photons. Although both photocatalysts require two-electron activation, the [Ir-PhCOOH] is more readily activated as a result of the more negatively charged Ir center. These photocatalysts show exclusive selectivities in the production of CO. The turnover frequencies for [Ir–COOH] and [Ir-PhCOOH] were 19 and 10 h^?1, respectively, under visible light irradiation. The e-e-H-H pathway was identified as the most favorable, consisting of the rate-limiting step in the conversion of 1COOH to 1CO, and where the barrier is significantly lower for [Ir-PhCOOH] than for [Ir–COOH].     

Rheological and photophysical investigations of chromonic-like supramolecular mesophases formed by luminescent iridium(III) ionic complexes in water

Luminescent complexes with general formula [(C^N)₂Ir(N^N)]OCOCH₃, where C^N = 2-phenylpyridine (ppy) and N^N = 2,2?-bipyridine (bpy), self-assemble into ordered ‘soft’ viscous mesophases of chromonic type. By changing the ancillary ligand with 1,10-phenanthroline (phen), a new mesomorphic complex was obtained. The self-assembly into ordered liquid crystalline phases of chromonic type in water was investigated by comprehensive rheological and photophysical studies. By changing the ancillary ligand bpy with phen, assembly into smaller, more symetric aggregates is favoured, resulting in lower viscosity and more dynamic mesophase.     

Recent progress in functionalized electrophosphorescent iridium(III) complexes

Iridium(III) complexes are one of the most important electrophosphorescent dyes with tunable emissions in the range of visible and near infrared lights, high photoluminescence yields and short lifetimes for high-efficiency organic light-emitting diodes (OLED) with 100% exciton harvesting. This review summarizes the recent development of electroluminescent Ir³⁺ complexes functionalized with host-featured carrier-transporting groups, with emphasis on correlations between functionalization, optoelectronic properties and device performance. According to the introducing approaches, the complexes were sorted with conjugated and aliphatic linkages, as well as the types of functional groups. The modification effect on physical properties and the state-of-the-art device performances were discussed.