Molecular dynamics simulation of single wall carbon nanotubes polymerization under compression

Single wall carbon nanotubes (SWCNTs) often aggregate into bundles of hundreds of weakly interacting tubes. Their cross-polymerization opens new possibilities for the creation of new super-hard materials. New mechanical and electronic properties are expected from these condensed structures, as well as novel potential applications. Previous theoretical results presented geometric modifications involving changes in the radial section of the compressed tubes as the explanation to the experimental measurements of structural changes during tube compression. We report here results from molecular dynamics simulations of the SWCNTs polymerization for small diameter arm chair tubes under compression. Hydrostatic and piston-type compression of SWCNTs have been simulated for different temperatures and rates of compression. Our results indicate that large diameter tubes (10,10) are unlike to polymerize while small diameter ones (around 5 A) polymerize even at room temperature. Other interesting results are the observation of the appearance of spontaneous scroll-like structures and also the so-called tubulane motifs, which were predicted in the literature more than a decade ago.     

Covalent sidewall functionalization of single-walled carbon nanotubes by amino acids

Single-walled carbon nanotubes (SWNTs) with amino acids covalently attached to their side walls, viz., “nanotube-aminoacids,” have been prepared starting from colloidal solutions of fluorinated SWNTs (F-SWNTs) and amino acids in o-dichlorobenzene and heating at 80–150 °C in the presence of pyridine. The syntheses were carried out with the F-SWNTs of approximately 2: 1 (C: F) stoichiometry and several natural α-aino acids with both pro-tected and unprotected carboxyl groups, such as glycine ethyl ester hydrochloride, L-serine ethyl ester hydrochloride, l-cysteine, and trans-4-hydroxy-l-proline. The nanotube-aminoacids have been characterized by Raman and FTIR spectroscopy, atomic force, scanning, and transmission electron microscopies, and thermal gravimetric analysis (TGA). Based on TGA data, the degree of sidewall functionalization in the synthesized SWNT derivatives was estimated to be in the range from one of 32 to one of 8 carbon atoms, depending on the amino acid nature and reaction conditions used. The amino acid-functionalized SWNTs, prepared in this work by simple and inexpensive one-step method, can be valuable precursors for peptide synthesis and targeted drug delivery, design and fabrication of nanocomposites and fibers, and other biomedical and engineering applications. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1035–1043, May, 2008.     

Enhanced preconcentration of selected chlorofluorocarbons on multiwalled carbon nanotubes with polar functionalities

Chromatographic monitoring of chlorofluorocarbons in air requires the preconcentration of these highly volatile species. In this paper, we present functionalized multiwalled carbon nanotubes as effective sorbents for a microtrap designed for chlorofluorocarbons preconcentration. Among the commercial carbons and carbon nanotubes studied, functionalization via carboxylation and propyl amine was most effective for dichlorofluoromethane and trichlorofluoromethane (Freon 11), which were selected as representative chlorofluorocarbons. The results show that carbon nanotubes functionalized with a polar groups led to as much as a 300% increase in breakthrough volume and the desorption bandwidth was reduced by 2.5 times.     

Chemical and biochemical sensing with modified single walled carbon nanotubes

The nano dimensions, graphitic surface chemistry and electronic properties of single walled carbon nanotubes make such a material an ideal candidate for chemical or biochemical sensing. Carbon nanotubes can be nondestructively oxidized along their sidewalls or ends and subsequently covalently functionalized with colloidal particles or polyamine dendrimers via carboxylate chemistry. Proteins adsorb individually, strongly and noncovalently along nanotube lengths. These nanotube-protein conjugates are readily characterized at the molecular level by atomic force microscopy. Several metalloproteins and enzymes have been bound on both the sidewalls and termini of single walled carbon nanotubes. Though coupling can be controlled, to a degree, through variation of tube oxidative pre-activation chemistry, careful control experiments and observations made by atomic force microscopy suggest that immobilization is strong, physical and does not require covalent bonding. Importantly, in terms of possible device applications, protein attachment appears to occur with retention of native biological structure. Nanotube electrodes exhibit useful voltammetric properties with direct electrical communication possible between a redox-active biomolecule and the delocalized pi system of its carbon nanotube support.     

Degree of chemical functionalization of carbon nanotubes determines tissue distribution and excretion profile

Getting rid of the tubes: An assessment of the retention of functionalized multi-walled carbon nanotubes (MWNTs) in the organs of mice was carried out using single photon emission computed tomography and quantitative scintigraphy (see scheme). Increasing the degree of functionalization on MWNTs enhanced renal clearance, while lower functionalization promoted reticuloendethelial system accumulation.     

Modeling adsorbate‐induced property changes of carbon nanotubes

Because of their potential for chemical functionalization, carbon nanotubes (CNTs) are promising candidates for the development of devices such as nanoscale sensors or transistors with novel gating mechanisms. However, the mechanisms underlying the property changes due to functionalization of CNTs still remain subject to debate. Our goal is to reliably model one possible mechanism for such chemical gating: adsorption directly on the nanotubes. Within a Kohn–Sham density functional theory framework, such systems would ideally be described using periodic boundary conditions. Truncating the tube and saturating the edges in practice often offers a broader selection of approximate exchange–correlation functionals and analysis methods. By comparing the two approaches systematically for NH₃ and NO₂ adsorbates on semiconducting and metallic CNTs, we find that while structural properties are less sensitive to the details of the model, local properties of the adsorbate may be as sensitive to truncation as they are to the choice of exchange–correlation functional, and are similarly challenging to compute as adsorption energies. This suggests that these adsorbate effects are nonlocal. © 2017 Wiley Periodicals, Inc.     

Preparation of poly 2-hydroxyethyl methacrylate functionalized carbon nanotubes as novel biomaterial nanocomposites

We report a simple method for the functionalization of multi-walled carbon nanotubes (MWNTs) with a biomedically important polymer, poly(2-hydroxyethyl methacrylate) (poly(HEMA)), by chemical grafting of HEMA monomer followed by free radical polymerization. The nanotubes were first oxidized with a mixture of conc. nitric acid and sulfuric acid (1:3), in order to obtain carboxylic acid functionalized MWNTs. Then the grafting of HEMA on to the surface of MWNTs was carried by chemical functionalization of HEMA with acid chloride-bound nanotubes by esterification reaction. FT-IR was used to identify functionalization of -COOH and HEMA groups attached to the surface of the nanotubes. The presence of poly(HEMA) on the nanotubes were confirmed by FESEM, TEM, and TGA analyses. Additionally, the dispersibility of the polymer functionalized nanotubes in methanol was also demonstrated. Considering the biomedical importance of poly(HEMA) and the recent successful in vivo studies on CNTs, in future, these materials are expected to be useful in the pharmaceutical industry as novel biomaterials composites with potential applications in drug delivery.     

Carbon nanotube-nucleobase hybrids: nanorings from uracil-modified single-walled carbon nanotubes

Single‐walled carbon nanotubes (SWCNTs) have been covalently functionalized with uracil nucleobase. The hybrids have been characterized by using complementary spectroscopic and microscopic techniques including solid‐state NMR spectroscopy. The uracil‐functionalized SWCNTs are able to self‐assemble into regular nanorings with a diameter of 50–70 nm, as observed by AFM and TEM. AFM shows that the rings do not have a consistent height and thickness, which indicates that they may be formed by separate bundles of CNTs. The simplest model for the nanoring formation likely involves two bundles of CNTs interacting with each other via uracil–uracil base‐pairing at both CNT ends. These nanorings can be envisaged for the development of advanced electronic circuits.     

Synergistic effect of functional carbon nanotubes and graphene oxide on the anti‐corrosion performance of epoxy coating

In this work, we reported the synergistic effect of functional carbon nanotubes (CNTs) and graphene oxide (GO) on the anticorrosion performance of epoxy coating. For this purpose, the GO and CNTs were firstly modified by the 3‐aminophenoxyphthalonitrile to realize the nitrile functionalized graphene oxides (GO‐CN) and carbon nanotubes (CNTs‐CN). As modified GO‐CN and CNTs‐CN were characterized and confirmed by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and gravimetric analyzer. It was found that about 19 and 24 wt% of 3‐aminophenoxyphthalonitrile were grafted onto the surface of the GO and CNTs, respectively. The electrochemical impedance spectroscopy results showed that the GO‐CN&CNTs‐CN hybrid materials exhibit a remarkable superiority in enhancing the anticorrosion performance of epoxy coatings. Significant synergistic effect of the lamellar structural GO‐CN and CNTs‐CN on the anticorrosion performance of epoxy composite coatings was designed. Besides, the epoxy coating with 1 wt% of the GO‐CN&CNTs‐CN hybrid exhibited the best anticorrosion performance, in which the impedance showed the largest one (immersion in 3.5 wt% of NaCl solution for 168 hr). Copyright © 2016 John Wiley & Sons, Ltd.     

Theoretical investigation of the stability,electronic and magnetic properties of thiolated single‐wall carbon nanotubes

The addition of SH and OH groups to single‐wall carbon nanotubes (SWCNTs) was investigated employing first principles calculations. In the case of the semiconducting (10, 0) SWCNT the SWCNT‐SH binding energy is weak, 2–4 kcal/mol. However, for the metallic (5, 5) SWCNT it is larger, 7–9 kcal/mol. Thus metallic SWCNTs seem to be more reactive to SH than the semiconducting ones. Indeed, the (6, 6) SWCNT is more reactive to SH than the (10, 0) SWCNT, by 2–3 kcal/mol, something that can be explained only considering the electronic structure of the tube, because the (6, 6) has a larger diameter. The binding energies are larger for the addition of the OH group, 25 and 30 kcal/mol for the (10, 0) and (5, 5) SWCNTs, respectively. When a single OH or SH group is attached to the metallic SWCNTs, we observe important changes in the DOS at the Fermi level. However, when multiple SH groups are attached, the changes in the electronic and magnetic properties depend on the position of the SH groups. The small binding energy found for the SH addition indicates that the successful functionalization of SWCNTs with SH, SCH₃, and S(CH₂)_nSH groups is mostly due to the presence of defects created after acid treatment and to a minor extent by the metallic tubes present in the samples. Perfect semiconducting SWCNTs showed very low reactivity against the SH group. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Effect of carbon nanotubes on mechanical and electrical properties of polyimide/carbon nanotubes nanocomposites

Multi-walled carbon nanotubes (MWNTs) reinforced polyimide nanocomposites were synthesized by in situ polymerization using 4,4′-oxydianilline, MWNTs, and pyromellitic dianhydride followed by casting, evaporation and thermal imidization. A homogeneous dispersion of chemically modified MWNTs was achieved in polyimide matrix as evidenced by scanning electron microscopy and atomic force microscopy. The incorporation of the modified MWNTs enhanced the mechanical properties of the polyimide due to the presence of strong interfacial interaction between the polymer matrix and the nanotubes in polymer composites. The resultant polyimide/MWNTs nanocomposites were electrically conductive with significant conductivity enhancement at 3 wt% MWNTs, which is favorable for many practical uses.     

Covalent functionalization of single-walled carbon nanotubes with polytyrosine: Characterization and analytical applications for the sensitive quantification of polyphenols

This work reports the synthesis and characterization of single-walled carbon nanotubes (SWCNT) covalently functionalized with polytyrosine (Polytyr); the critical analysis of the experimental conditions to obtain the efficient dispersion of the modified carbon nanotubes; and the analytical performance of glassy carbon electrodes (GCE) modified with the dispersion (GCE/SWCNT-Polytyr) for the highly sensitive quantification of polyphenols. Under the optimal conditions, the calibration plot for the amperometric response of gallic acid (GA) shows a linear range between 5.0 × 10⁻⁷ and 1.7 × 10⁻⁴ M, with a sensitivity of (518 ± 5) m AM⁻¹ cm⁻², and a detection limit of 8.8 nM. The proposed sensor was successfully used for the determination of total polyphenolic content in tea extracts.     

Effect of carbon nanotubes on the photo-oxidative durability of syndiotactic polypropylene

Polymer nanocomposites with carbon nanotubes as fillers have attracted more attention than any other nanomaterials. A full development of these materials requires a deep understanding of the way they behave in the use conditions. In this work, the resistance to accelerated photooxidation of syndiotactic polypropylene/multi-walled carbon nanotube (sPP/MWCNTs) films was compared to the photooxidation behaviour of unfilled polypropylene films with the same structural organization. The chemical and structural modifications resulting from photooxidation have been followed using infrared spectroscopy and diffractometric analysis. It was found that a good dispersion degree of the nanofiller, evaluated by atomic force microscopy, contributes to reduction in the rate of photooxidation and an increase in the oxidative thermal stability of the polymeric matrix. Different concomitant effects are considered to explain these results, among which morphology and structure of the nanocomposites together with the MWCNT capacity to interact with oxygen molecules making them unavailable in the first stages of photooxidation.     

Effects of carbon nanotubes on polymer physics

A single carbon nanotube has many similarities with an individual polymer chain including the fact that the end‐to‐end length of both are often about the same and the diameter of the chain is about the same (for single‐walled nanotubes) or only ～10 to 20 times larger (for multiwalled nanotubes). The combination of the solid surface and the similarity of the two materials means that polymer physics are altered in manners not seen with any other type of commonly used filler. The purpose of this review is to update a chapter that appears in a recent tome by Grady (2011) and describe how polymer physics is altered in composites that contain carbon nanotubes. Subjects that will be discussed include chain configuration, glass transition, polymer diffusion, unit cells and crystalline superstructure (lamellae, spherulites and shish‐kebabs), and crystallization kinetics. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

On the applicability of cluster models to study the chemical reactivity of carbon nanotubes

We have performed a comparative study on the reactivity of metallic and semiconducting nanotubes using infinite and finite models. Infinite models were created using periodic boundary conditions while finite ones were constructed by means of hydrogen terminated nanotubes sections. Cluster models systematically underestimate the reactivity of metallic single wall carbon nanotube (SWCNT)s. We have confirmed that metallic nanotubes are more reactive than semiconducting species, in disagreement with previous works. The differences can be attributed to the presence of an instability in the singlet ground state of the wavefunction corresponding to semiconducting nanotubes clusters. When lower electronic states of the pristine cluster are considered, semiconducting nanotubes become less reactive as compared with metallic SWCNTs. Particularly, if an antiferromagnetic solution is considered for the semiconducting (10,0) SWCNT cluster, it becomes less reactive than the (5,5) SWCNT, as observed for infinite models. Because semiconducting nanotubes are less reactive than metallic counterparts, their reaction energies converge faster to the values observed for graphene. For a 1.6-nm diameter semiconducting nanotube, the addition energy is comparable with graphene. Thus, semiconducting nanotubes with diameters larger than 1.6 nm are going to be as reactive as graphene and the effects of curvature will be unimportant.     

The conversion of polyaniline nanotubes to nitrogen-containing carbon nanotubes and their comparison with multi-walled carbon nanotubes

Polyaniline (PANI) nanotubes were prepared by the oxidation of aniline in solutions of acetic or succinic acid, and subsequently carbonized in a nitrogen atmosphere during thermogravimetric analysis running up to 830 °C. The nanotubular morphology of PANI was preserved after carbonization. The molecular structure of the original PANI and of the carbonized products has been analyzed by FTIR and Raman spectroscopies. Carbonized PANI nanotubes contained about 8 wt.% of nitrogen. The molecular structure, thermal stability, and morphology of carbonized PANI nanotubes were compared with the properties of commercial multi-walled carbon nanotubes.