Determination of liquid-liquid partition coefficients by separation methods

By essence, all kinds of chromatographic methods use the partitioning of solutes between a stationary and a mobile phase to separate them. Not surprisingly, separation methods are useful to determine accurately the liquid-liquid distribution constants, commonly called partition coefficient. After briefly recalling the thermodynamics of the partitioning of solutes between two liquid phases, the review lists the different methods of measurement in which chromatography is involved. The shake-flask method is described. The ease of the HPLC method is pointed out with its drawback: the correlation is very sensitive to congeneric effect. Microemulsion electrokinetic capillary electrophoresis has become a fast and reliable method commonly used in industry. Counter-current chromatography (CCC) is a liquid chromatography method that uses a liquid stationary phase. Since the CCC solute retention volumes are only depending on their partition coefficients, it is the method of choice for partition coefficient determination with any liquid system. It is shown that Ko/w, the octanol-water partition coefficients, are obtained by CCC within the -1 < log Ko/w < 4 range, without any correlation or standardization using octanol as the stationary phase. Examples of applications of the knowledge of liquid-liquid partition coefficient in the vast world of solvent extraction and hydrophobicity estimation are presented.     

Liquid crystals purity assay using nonaqueous capillary electrokinetic chromatography

A method for purity control of newly synthesized lactic acid–based liquid crystals has been developed. The electrokinetic chromatography proved to be suitable for the separation of these electroneutral substances from their impurities. The separations were performed in an acidic acetonitrile-based background electrolyte (BGE) with a pseudostationary phase formed by a cationic surfactant. During the optimization step, appropriate concentrations of cetyltrimethylammonium bromide, acetic acid, and water were seeked. In the optimized method, separations were carried out in acetonitrile with 1-mol/L acetic acid, 80-mmol/L cetyltrimethylammonium bromide, and 6% (v/v) water. Interesting positive effects of a small water content in the BGE on electroosmotic flow and resolution of liquid crystal substances from their impurities were observed and discussed. Samples of five liquid crystal substances, both pure and containing impurities from synthesis, were analyzed. The identification of analytes was based on a comparison of relative migration times related to the migration time of mesityl oxide. For all five samples, impurities were separated from the liquid crystals and the method thus showed its viability. To the best of our knowledge, this method is used for the first time for the purity control of newly synthesized liquid crystals. This method can be used to confirm or complement the results obtained by commonly used high-performance liquid chromatography and supercritical fluid chromatography methods. Furthermore, the electrokinetic chromatography method requires very small amounts of sample, solvents, and buffer constituents. Overall, its operational costs are significantly lower.     

Pharmaceutical applications of micelles in chromatography and electrophoresis

This review surveys the use of micelles as separation media in chromatography and electrophoresis. Applications to pharmaceuticals whose molecular masses are relatively small are focused on in this review. In high-performance liquid chromatography (HPLC), chromatography using micelles and reversed-phase stationary phases such as octadecylsilylized silica gel (ODS) columns is known as micellar liquid chromatography (MLC). The main application of MLC to pharmaceutical analysis is the same as in ion-pair chromatography using alkylsulfonate or tetraalkylammonium. In most cases, selectivity is much improved compared with other short alkyl chain ion-pairing agents such as pentanesulfonate or octanesulfonate. Direct plasma/serum injection can be successful in MLC. Separation of small ions is also successful by using gel filtration columns and micellar solutions. In electrophoresis, especially capillary electrophoresis (CE), micelles are used as pseudo-stationary phases in capillary zone electrophoresis (CZE). This mode is called micellar electrokinetic chromatography (MEKC). Most of the drug analysis can be performed by using the MEKC mode because of its wide applicability. Enantiomer separation, separation of amino acids and closely related peptides, separation of very complex mixtures, determination of drugs in biological samples etc. as well as separation of electrically neutral drugs can be successfully achieved by MEKC. Microemulsion electrokinetic chromatography (MEEKC), in which surfactants are also used in forming the microemulsion, is successful for the separation of electrically neutral drugs as in MEKC. This review mainly describes the typical applications of MLC and MEKC for the analysis of pharmaceuticals.     

Electrokinetically-driven cation-exchange chromatography of proteins and its comparison with pressure-driven high-performance liquid chromatography.

This paper examines protein ion-exchange behavior in electrokinetically-driven open-tubular chromatography with columns produced by immobilization of poly(aspartic acid) on capillary walls. Retention and selectivity are similar in the electrokinetic elution mode to that observed in HPLC. The separation mechanism was found to depend on the relationship of mobile phase pH to that of protein pI and ionic strength. Column efficiency in the electrokinetic elution mode was found to be 10-100-times higher than in HPLC. The best separations were achieved at intermediate ionic strength and high pH. The great advantage of these low-phase-ratio, high-efficiency open tubular columns is that isocratic separations in the electrokinetic elution mode were equivalent to gradient elution in the HPLC mode. Low phase ratio has the net effect of collapsing the chromatogram into a narrow elution window while the very high efficiency produces the requisite resolution.     

Reduction of silanophilic interactions in liquid chromatography with the use of ionic liquids

A suppression of silanophilic interactions by the selected ionic liquids added to the mobile phase in thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC) is reported. Acetonitrile was used as the eluent, alone or with various concentrations of water and phosphoric buffer pH 3. Selectivity of the normal (NP) and the reversed (RP) stationary phase material was examined using a series of proton-acceptor basic drugs analytes. The ionic liquids studied appeared to significantly affect analyte retention in NP-TLC, RP-TLC and RP-HPLC systems tested. Consequently, the increased separation selectivity was attained. Due to ionic liquid additives to eluent even analytes could be chromatographed, which were not eluted from the silica-based stationary phase materials with 100% of acetonitrile in the mobile phase. Addition of ionic liquid already in very small concentration (0.5%, v/v) could reduce the amount of acetonitrile used during the optimization of basic analytes separations in TLC and HPLC systems. Moreover, the influence of temperature on the separation of basic analytes was demonstrated and considered in practical HPLC method development.     

Application of protein-liposome conjugate as a pseudo-stationary phase in capillary electrophoresis

Liposomes have very similar structure to cell plasma membranes. Using liposomes as stationary phase in liquid chromatography (LC) or micellar electrokinetic chromatography (MEKC) has been demonstrated to be a good, dynamic method for the study of the interaction between cell membranes and important biomolecules. There has been no report on integrating plasma membrane proteins with phospholipids as pseudo-stationary phase in MEKC. In this paper, a novel mode of capillary electrophoresis (CE) is developed, that is, protein-liposome conjugate. This protein-liposome biomimetic membrane is demonstrated for the first time to be applicable as pseudo-stationary phase in MEKC. The protein is able to significantly improve chromatographic performance and stability. The experimental phenomena are further confirmed in terms of specific capacity factors and free binding energy. This new CE mode is used to investigate the interaction between dopamine transporter and dopamine-nomifensine.     

Emulsification liquid phase microextraction followed by on-line phase separation coupled to high performance liquid chromatography

An emulsification liquid phase microextraction followed by on-line phase separation coupled to high performance liquid chromatography (HPLC) is introduced based on a novel idea for the separation of dispersed organic phase from aqueous phase. In this method, the dispersed organic extraction phase was filtered using an in-line filter and it was separated from the water sample. The new approach is simple and, in addition to improving some limitations of the conventional emulsification liquid phase microextraction, eliminates the need for centrifugation in the phase separation step.     

Monitoring of cefepime in human serum and plasma by micellar electrokinetic capillary chromatography: Improvement of sample preparation and validation by liquid chromatography coupled to mass spectrometry

Cefepime monitoring in deproteinized human serum and plasma by micellar electrokinetic capillary chromatography and liquid chromatography coupled to mass spectrometry in presence of other drugs is reported. For micellar electrokinetic capillary chromatography, sample preparation comprised dodecylsulfate protein precipitation at pH 4.5 using an increased buffer concentration compared to that of a previous assay and removal of hydrophobic compounds with dichloromethane. This provided robust conditions for cefepime analysis in the presence of sulfamethoxazole and thus enabled its determination in samples of patients that receive cotrimoxazole. The liquid chromatography assay is based upon use of a column with a pentafluorophenyl‐propyl modified and multiendcapped stationary phase and the coupling to electrospray ionization with a single quadrupole detector. The performances of both assays with multilevel internal calibration were assessed with calibration and control samples and both assays were determined to be robust. Cefepime levels monitored by micellar electrokinetic capillary chromatography in samples from patients that were treated with cefepime only and with cefepime and cotrimoxazole were found to compare well with those obtained by liquid chromatography coupled to mass spectrometry. Cefepime drug levels determined by micellar electrokinetic capillary chromatography could thereby be validated.     

Stir bar sorptive extraction-liquid desorption applied to the analysis of hop-derived bitter acids in beer by micellar electrokinetic chromatography

Stir bar sorptive extraction-liquid desorption (SBSE-LD) has been applied as an efficient sample preparation method for the analysis of beer bitter acids. Extracts free of almost all interfering compounds were obtained, allowing simultaneous analysis of iso-alpha-acids and reduced iso-alpha-acids. A robust micellar electrokinetic chromatography (MEKC) method was developed that enables fast separation of iso-alpha-acids and reduced iso-alpha-acids. Quantitative data are in good agreement with results obtained by high-performance liquid chromatography (HPLC) using direct beer injection.     

Determination of trace anions in liquefied petroleum gas using liquid absorption and electrokinetic migration for enrichment followed by ion chromatography

A simple sample enrichment technique, electrokinetic migration enrichment in single phase using a designed device, coupled with ion chromatography is presented for the determination of four anions (H(2)PO(4)(-), Cl(-), NO(3)(-), and SO(4)(2-)) in liquefied petroleum gas by liquid adsorption. The electrokinetic migration enrichment is based on the phenomenon of ion electrokinetic migration to the opposite electrode. When the anions migrated to the anode in a smaller volume chamber under the electric field, the concentration was realized. The main parameters affecting enrichment efficiency of applied voltage and enrichment time were investigated. The ion chromatography condition for anions separation was also studied. Under the optimal electrokinetic migration enrichment and ion chromatography conditions, the four anions were detected simultaneously with good linear relationship (r(2) = 0.9908-0.9968) and high precisions (less than 5% of the relative standard deviations of peak areas). The limits of detection of anions (S/N of 3) were in the range of 8-600 μg L(-1). The enrichment factors of the four anions ranged from 3.1 to 5.8. The established method was successfully applied to the analysis of the trace anions in liquefied petroleum gas by liquid adsorption with satisfactory results. The advantages of this method are simple operation and low cost.     

Determination of ketoprofen in plasma using high-performance liquid chromatography. Comparison with gas--liquid chromatography (author's transl)

A new method of determination of ketoprofen 2-(3-benzoyl phenyl) propionic acid in plasma using high-performance liquid chromatography (HPLC) is described. After extraction by diethyl either in acidic medium, ketoprofen and the internal standard, 2-(4-benzoyl phenyl) butyric acid, are methylated with gaseous diazomethane and their concentrations measured by HPLC using in LiChrosorb Si 60 (5 micrometer) column and dichloromethane-hexane (60:40) as the mobile phase. The absolute retention times of the internal standard and ketoprofen are 11.6 and 12.8 min, respectively. The precision of the methods is +/- 4% and the lower detection limit ranges from 0.06 to 0.10 microgram/ml. The results obtained by HPLC show a very good correlation with those obtained by gas--liquid chromatography. The proposed method is sensitive, reproducible and rapid and very suitable for ketoprofen determination in pharmacokinetic studies.     

Determination of the purity of phenoxymethylpenicillin by micellar electrokinetic chromatography and reversed phase liquid chromatography on a monolithic silica column

A micellar electrokinetic chromatographic and a fast reversed‐phase liquid chromatographic method have been developed for determination of the purity of phenoxymethylpenicillin. The optimized running buffer composition was 40 mM phosphate–borate–125 mM SDS–3.5% (v/v) methanol. The HPLC method employed a monolithic silica C18 column and a mobile phase composed of phosphate buffer, pH 3.5, and ACN, the flow‐rate being 3.5 mL/min. Both methods were successfully validated. Linearity, intermediate precision, limits of quantitation, accuracy, and a good correlation of the HPLC and MEKC results were demonstrated. Both methods proved to be fast and reliable and sufficiently sensitive. A combination of the two methods can be very useful in impurity profiling.     

A Quarter Century of Thin-Layer Chromatography—An Interim Report

Thin-layer chromatography (TLC) has been in general use since 1958. The prerequisites were the use of very small particle size material in the layers and the demonstration that not only lipophilic mixtures but also mixtures of cardiac glycosides, alkaloids, sugars, and amino acids could be separated quickly and simply on silica gel layers. The impressive separations obtained using the method later encouraged attempts to use adsorbants having such, narrow-range small particles in column chromatography. In order to achieve sufficient flow rates the use of high pressures was necessary. Thus, high pressure or high performance liquid chromatography (HPLC) was born, whose godfather, as far as instrumental development is concerned, was gas chromatography (GC). Today, chromatography is classified according to the nature of the transport phase: liquid, gas, or “electro” chromatography. Sample preparation often requires more time than the actual separation. rapid thermal separation and application techniques (TAS, TFG) have brought advantages to TLC. As before, the art of chromatography consists in choosing the appropriate mobile phase, stationary phase, and separation technique. Gradient TLC offers new possibilities; for example, gradient layers make it possible to obtain selective information on the individual components of a mixture and also allow significant focussing effects to be achieved. Sequential and centrifugal TLC have paved the way for further advances. The questions arise whether the standard conditions, formulated 25 years ago, are still applicable and how the variations which have been introduced should be judged. Group- and substance specific methods of detection are discussed in addition to universal methods. Quantitation is critically discussed and it is concluded that HPLC has the better chance in the furture. Combination and coupling techniques ease the positive identification of individual substances. Finally, it is discussed why TLC is the simplest, most versatile, most cost effective, and most widely used chromatographic method and reasons are proposed as to why it will remain so for the foreseeable future.     

Hybridation of different chiral separation techniques with ICP-MS detection for the separation and determination of selenomethionine enantiomers: chiral speciation of selenized yeast

Enantioseparation and determination of selenomethionine enantiomers in selenized yeast was investigated using chiral separation techniques based on different principles, coupled on-line to inductively coupled plasma mass spectrometry (ICP-MS) for selenium-specific detection. High performance liquid chromatography (HPLC) on a beta-cyclodestrin (beta-CD) column, cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC), gas chromatography (GC) on a Chirasil-L-Val column, and HPLC on a Chirobiotic T column have been investigated as the chiral separation techniques. For HPLC separation on the beta-CD column, and also for CD-MEKC, selenomethionine enantiomers were derivatized with NDA/CN(-). For chiral separation by GC, selenomethionine enantiomers were converted into their N-trifluoroacetyl (TFA)-O-alkyl esters. The developed hybridation methodologies are compared with respect to enantioselectivity, sensitivity and analysis time. The usefulness of the best-suited method [HPLC (Chirobiotic T)-ICP-MS] was demonstrated by its application to the successful chiral speciation of selenium and D-and L-selenomethionine content determination in selenized yeast.     

Separation of 4-dimethylamino-6-(4-methoxy-1-naphthyl)-1,3,5-triazine-2-hydrazine derivatives of carbonyl compounds by reversed-phase capillary electrochromatography

4-Dimethylamino-6-(4-methoxy-1-naphthyl)-1,3,5-triazine-2-hydrazine (DMNTH) is a novel derivatizing reagent specially designed for the determination of carbonyl compounds. In this work, we describe the separation of DMNTH-derivatized carbonyl compounds by reversed-phase capillary electrochromatography (CEC). After systematic investigations of the effects of experimental conditions viz. pH and concentration of buffer, type of stationary phase, injection volume of sample, organic modifier, and temperature, optimal conditions were found. The sample compounds, which were separated with gradient high performance liquid chromatography (HPLC), were separated by CEC under isocratic elution due to the high efficiency. Comparisons of separations by CEC and micellar electrokinetic chromatography (MEKC) were made.     

High Performance Liquid Chromatography versus Stacking-Micellar Electrokinetic Chromatography for the Determination of Potentially Toxic Alkenylbenzenes in Food Flavouring Ingredients

Alkenylbenzenes, including eugenol, methyleugenol, myristicin, safrole, and estragole, are potentially toxic phytochemicals, which are commonly found in foods. Occurrence data in foods depends on the quality of the analytical methodologies available. Here, we developed and compared modern reversed-phase high performance liquid chromatography (HPLC) and stacking-micellar electrokinetic chromatography (MEKC) methods for the determination of the above alkenylbenzenes in food flavouring ingredients. The analytical performance of HPLC was found better than the stacking-MEKC method. Compared to other HPLC methods found in the literature, our method was faster (total run time with conditioning of 15 min) and able to separate more alkenylbenzenes. In addition, the analytical methodology combining an optimized methanol extraction and proposed HPLC was then applied to actual food flavouring ingredients. This methodology should be applicable to actual food samples, and thus will be vital to future studies in the determination of alkenylbenzenes in food.     

Complimentary Role of Micellar Electrokinetic Capillary Chromatography and High Performance Liquid Chromatography in the Separation of Plant Phenolics

Abstract

A comparison was made between the efficiency of micellar electrokinetic capillary chromatography (MECC) and reversed phase high performance liquid chromatography (RP-HPLC) to separate a mixture of plant phenolics. Of a range of buffers 6 mM borate/10 mM phosphate/100 mM SDS at pH 8.5 was the most effective in separating a complex mixture of phenolics using MECC. Using this buffer the elution order and resolution was different from that obtained by HPLC using a reversed phase C18 column. These results illustrate how MECC and RP-HPLC are complimentary when examining complex mixtures such as those obtained from plant extracts. MECC using these conditions was applied to the examination of phenolics from leaf tissue of Eucalyptus margmata (jarrah).     

Analysis of biomass sugars using a novel HPLC method

The precise quantitative analysis of biomass sugars is a very important step in the conversion of biomass feedstocks to fuels and chemicals. However, the most accurate method of biomass sugar analysis is based on the gas chromatography analysis of derivatized sugars either as alditol acetates or trimethylsilanes. The derivatization method is time consuming but the alternative high-performance liquid chromatography (HPLC) method cannot resolve most sugars found in biomass hydrolysates. We have demonstrated for the first time that by careful manipulation of the HPLC mobile phase, biomass monomeric sugars (arabinose, xylose, fructose, glucose, mannose, and galactose) can be analyzed quantitatively and there is excellent baseline resolution of all the sugars. This method was demonstrated for standard sugars, pretreated corn stover liquid and solid fractions. Our method can also be used to analyze dimeric sugars (cellobiose and sucrose).     

Comparison of HPLC and MEEKC for Miconazole Nitrate Determination in Pharmaceutical Formulation

A simple solid phase extraction (SPE) method coupled with high performance liquid chromatography (HPLC) using UV detector and microemulsion electrokinetic chromatography (MEEKC) has been developed and compared for the quantitative determination of miconazole nitrate in pharmaceutical formulation. For HPLC method, two parameters were optimized, namely, the wavelength and the mobile phases. The optimized condition was at the 225 nm wavelength and the mobile phase of ACN:MeOH (90:10 v/v). There are seven MEEKC parameters that were optimized, in this research, which were applied to voltage, temperature, wavelength, sodium dodecyl sulfate (SDS) concentration, buffer pH, buffer concentration and butan-1-ol concentration. The optimum MEEKC condition was obtained using 86.35 % (w/w) 2.5 mM borate buffer pH 9, 0.25 % (w/w) SDS, 0.8 % (w/w) ethyl acetate, 6.6 % w/w butan-1-ol and 6.0 % (w/w) acetonitrile. The combination of SPE using a diol column with HPLC–UV and the MEEKC methods were successfully applied for the determination of miconazole nitrate in a pharmaceutical formulation with the recovery percentage of 98.35 and 92.50 %, respectively.

     

Determination of the herbicide metribuzin and its major conversion products in soil by micellar electrokinetic chromatography

In this paper, a multiresidue method for the analysis in soils of metribuzin (M) and its major conversion products, deaminometribuzin (DA), diketometribuzin (DK) and deaminodiketometribuzin (DADK) is developed. Considering the neutral and charged nature of the molecules, micellar electrokinetic chromatography (MEKC) is a very efficient method for the separation of these compounds, providing high efficiency and short analysis times. Different electrophoretic parameters were studied to optimize the separation, such as the buffer pH and concentration, sodium dodecyl sulphate (SDS) concentration, injection conditions and applied voltage. Excellent separation of the studied compounds was achieved within about 7 min. Soil samples were previously extracted using methanol in an ultrasonic bath and then a SPE procedure was applied to pre-concentrate the analytes by passage through a LiChrolut EN sorbent column. Detection limits at the low microgkg(-1) level were obtained. The proposed method has been satisfactorily applied in soil samples showing recoveries ranging from 86.7% to 104.2% and represents a valuable alternative to high-performance liquid chromatography (HPLC).