交联核壳结构PBA/PS和PBA/PMMA纳米微球的制备与应用

考察了聚丙烯酸丁酯/聚苯乙烯(PBA/PS)以及聚丙烯酸丁酯/聚甲基丙烯酸甲酯(PBA/PMMA)交联核壳结构纳米高分子微球的制备方法,并对其在尼龙复合材料中的应用进行了初步研究.结果表明,通过交联剂的引入使粒子核层和壳层内部均形成了高度交联的结构,可以限制亲水性较小的聚苯乙烯(PS)壳层向粒子内部迁移的趋势;制备出的微球平均粒径为40~50 nm,粒径分布很窄.采用饥饿态加料方式加入第二单体不仅可以使微球具有较高的产率和凝胶率,而且可以使其具有更理想的核壳结构和更窄的粒径分布.此外,将合成出的PBA/PMMA核壳粒子对尼龙6基体进行复合的结果表明,由于该微球表面与尼龙6基体之间具有较强的界面相互作用且微球具有较大的形变能力,可以在基体中形成良好的分散,在保持材料强度的同时有效地提高了其刚性和韧性.     

核壳聚合物粒子

介绍了核壳聚合物的用途、研究手段以及合成方法，探讨了影响核壳结构形成的热力学因素、及核壳结构的形成机理。     

NaYF4∶Yb3+,Er3+@NaGdF4@TaOx多模态纳米探针的合成及其在生物成像中的应用

采用溶剂热法在稀土掺杂NaYF4∶Yb3+,Er3+上转换纳米粒子上包覆一层NaGdF4,再利用反相微乳液法在NaGdF4上覆盖一层TaOx,从而合成NaYF4∶Yb3+,Er3+@NaGdF4@TaOx核壳壳结构的纳米探针。使用透射电镜(TEM)、X射线衍射(XRD)及X射线能量色散谱分析(EDS)对NaYF4∶Yb3+,Er3+@NaGdF4@TaOx纳米探针的结构和组成进行表征。并通过荧光光谱、磁滞回线以及电子计算机X射线横断扫描(CT)造影成像等方法对其性能进行了表征,证明该纳米探针具有良好的光学、磁学和CT造影特性。将NaYF4∶Yb3+,Er3+@NaG-dF4@TaOx纳米探针应用于小鼠活体成像实验,结果表明,这种纳米探针对小鼠肿瘤部位的磁共振成像(MRI)和CT信号均有较好的增强效果,表明其在多模态造影成像方面有潜在的应用前景。     

NiO@SiO_2核壳催化剂在浆态床中低温甲烷化研究

采用改进的Stber方法,可控制备出具有不同形貌的NiO@SiO_2核壳结构催化剂,并在浆态床反应器(320℃)上,对其合成气低温甲烷化性能进行评价;同时借助XRD、TEM、XPS和N_2物理吸附等方法对反应前后催化剂的物化性质进行了表征。研究表明,实验制备的催化剂形貌规整、粒径均匀,且具有较好的热稳定性。在相同的制备条件下,核颗粒粒径增大,其SiO_2壳层的厚度随之增加。在反应过程中,部分催化剂的核壳结构遭到破坏并出现SiO_2空壳,是CO与壳层内的Ni作用生成易迁移的Ni羰基化物种(Ni(CO)_x)所致。催化剂的甲烷化活性随着核颗粒粒径的增加呈现下降趋势;在不同的反应阶段,催化剂的失活速率存在明显差异,在反应的前20 h内,催化剂出现快速失活,20 h后失活缓慢,但是催化剂的甲烷选择性都保持在80%左右。催化剂的失活,一方面,是因为反应过程中,Ni核颗粒发生了长大;另一方面,是由于壳层中3-5 nm的介孔的减少以及催化剂比表面积、孔容的下降。     

SiO2／LaF3：Eu3＋核壳结构发光粒子的制备与表征

采用简单的液相法合成了SiO2/LaF3:Eu3 核壳结构发光粒子,并对其结构及发光性能进行了表征.XRD分析表明包覆层LaF3:Eu3 为立方晶相结构,红外光谱表明SiO2颗粒表面有柠檬酸的修饰,电镜照片表明合成了球形的核-壳结构的复合粒子,包覆层厚度为10～20 nm,光谱测试表明核-壳复合粒子与纯的LaF3:Eu3 具有相同的发光性能,均以589 nm附近的5D0-7F1磁偶极跃迁为最强发射峰,说明Eu3 在LaF3基质中占据的格位相同.     

MAA存在下VAc/BA核壳乳液聚合过程中的胶粒形态研究

用ＴＥＭ和电位滴定法对不同配方和工艺条件得到的胶粒形态结构和羧基分别进行了表征。结果表明：加入甲基丙烯酸有利于胶粒的稳定和形成规则的核壳胶粒。半连续加料不会形成完全反转的核壳结构,但是,核层在反应过程中由于聚合物簇的迁移会造成形变。由于胶粒中聚合物浓度高,粘度大,因而胶粒形态变化受动力学影响甚大,羧基分布主要是由动力学确定的。     

核壳型含氟丙烯酸酯共聚物的合成及性能

采用饥饿态半连续种子乳液聚合方法, 在十二烷基硫酸钠(SDS)/辛基苯基聚氧乙烯醚(TX-10)复合乳化剂的作用下, 分别选用甲基丙烯酸三氟乙酯(TFEM)、甲基丙烯酸六氟正丁酯(HFBM)和甲基丙烯酸十二氟庚酯(DFHM)为含氟单体, 合成以丙烯酸正丁酯(BA)、甲基丙烯酸甲酯(MMA)和含氟单体为原料的核壳型结构含氟丙烯酸酯共聚物乳液. FTIR, 1H NMR, TEM和DSC分析结果显示, 获得了BA/MMA/含氟单体的共聚物乳液, 且乳液具有明显的核壳结构. DSC, TGA和SEM-EDX的分析显示, 核壳型结构的共聚物具有优异的热力学稳定性能和成膜性能; 长侧链或短侧链含氟单体对共聚物的热稳定性影响不明显, 但侧链较长的含氟单体所获得的聚合物在成膜过程中更易向表面迁移, 更能体现含氟聚合物的优点.     

核壳结构对聚苯乙烯／聚丙烯酸酯LIPN力学性能的影响

本文系统研究了核壳结构对聚苯乙烯/聚丙烯酸酯(PS/PA)LIPN力学性能的影响.通过改变加料顺序、溶胀时间及双相互穿等多步聚合方法,考察了动态力学和力学性能变化的规律.结果表明,核壳结构随加料顺序的变化,导致力学性能相差十分悬殊.增加溶胀时间及采用多步聚合的双相互穿,能明显地提高互穿程度,使玻璃化温度发生内移,力学性能得到改善.     

Cu/ZnO@H-β-P催化剂在合成气制备液化石油气反应中的性能研究

采用共沉淀法制备Cu/ZnO催化剂、水热合成法制备H-β分子筛、通过物理包膜法制备了具有核壳结构的Cu/ZnO@H-β-P催化剂,并用于合成气制备液化石油气(LPG)反应。通过XRD、NH3-TPD、BET和SEM-EDS等手段对催化剂进行了表征,利用固定床连续反应装置对催化剂进行了活性评价。结果表明,Cu/ZnO@H-β-P催化剂是具有中孔的核壳结构材料,其协同作用打破了原有的热力学平衡,促进了甲醇→DME→LPG串联反应的连续进行。与物理混合的Mix-Cu/ZnO-H-β催化剂相比,Cu/ZnO@H-β-P催化剂的CO转化率和LPG选择性更高,空速和反应温度对催化剂活性影响明显,最佳空速和反应温度分别为2 400 h~(-1)和350℃。使用Cu/ZnO@H-β-P催化剂在最佳条件下进行合成气制备LPG反应,CO转化率达到了57.22%,LPG选择性达到了60.52%。     

Darstellung,Kristallstrukturen, Schwingungsspektren und Normalkoordinatenanalyse von vier bindungsisomeren Trichlorotrirhodanoosmaten(IV)

Preparation, Crystal Structures, Vibrational Spectra, and Normal Coordinate Analysis of four Linkage Isomeric Trichlorotrirhodanoosmates(IV) By treatment of fac-[OsCl₃I₃]^2? with (SCN)₂ in dichloromethane the linkage isomers fac-[OsCl₃(NCS)₃]^2? ( 1 ), mer-[OsCl₃(NCS)₂^c(SCN)]^2? ( 2 ), mer-[OsCl₃(NCS)(SCN)₂^t]^2? ( 3 ), and mer-[OsCl₃(NCS)(SCN)₂^c]^2? ( 4 ) are formed which have been separated by ion exchange chromatography on diethylaminoethyl cellulose. X-Ray structure determinations have been performed on single crystals of fac-(Ph₄As)₂[OsCl₃(NCS)₃] (triclinic, space group P1 , a = 12.142(5), b = 13.233(5), c = 19.300(5) Å, α = 98.642(5)º, β = 100.509(5)º, γ = 112.514(5)º, Z = 2), mer-(Ph₄As)₂[OsCl₃(NCS)₂^c (SCN)] · acetone (triclinic, space group P1 , a = 11.707(5), b = 13.238(5), c = 19.048(5) Å, α = 75.960(5)º, β = 88.981(5)º, γ = 69.999(5)º, Z = 2), mer-(Ph₄As)₂[OsCl₃(NCS)(SCN)₂ ^t] (triclinic, space group P1, a = 10.6861(12), b = 11.6587(5), c = 12.5232(5) Å, α = 112.069(8)º, β = 95.052(8)º, γ = 92.559(7)º, Z = 1) and mer-(Ph₄As)₂[OsCl₃(NCS)(SCN)₂ ^c] · 2acetone (triclinic, space group P1 , a = 11.444(5), b = 14.661(5), c = 15.830(5) Å, α = 75.790(5)º, β = 80.273(5)º, γ = 75.205(5)º, Z = 2). The complex anions are completely ordered. The via N or S coordinated thiocyanate groups are located nearly direct above one of the cis-positioned Cl ligands with Os? N? C angles of 169.1º, 171.5º, 175.7º ( 1 ), 175.6º, 178.6º ( 2 ), 172º ( 3 ), and 173.1º ( 4 ) and Os? S? C angles of 106.2º ( 2 ), 106.1º, 106.6º ( 3 ), 105.1º, and 108.2º ( 4 ). Using the molecular parameters of the X-Ray determinations the low temperature (10 K) IR and Raman spectra of the (n-Bu₄N) salts of all four linkage isomers have been assigned by normal coordinate analyses based on a modified valence force field. The valence force constants are f_d(OsN) = 1.71 ( 1 ), 1.46 and 1.62 ( 2 ), 1.69 ( 3 ), and 1.61 ( 4 ), f_d(OsS) = 1.27 ( 2 ), 1.36 ( 3 ), 1.32, and 1.49 mdyn/Å ( 4 ). Taking into account increments of the trans influence a good agreement between observed and calculated frequencies is achieved.     

Darstellung und Kristallstruktur von (n-Bu4N)3[Ir(NCS)(SCN)5]

Preparation and Crystal Structure of (n-Bu₄N)₃[Ir(NCS)(SCN)₅] The evaporated ethanolic extrakt of the reaction product of K₃[IrCl₆] and HNO₃, refluxed with an aqueous KSCN solution yields a mixture of the linkage isomers [Ir(NCS)_n(SCN)_6?-n]^3?, n = 0? 2, and small amounts of linkage isomeric chloropentarhodanoiridates(III), from which [Ir(NCS)(SCN)₅]^3? has been isolated by ion exchange chromatography on DEAE-cellulose. The X-Ray structure determination on a single crystal of (n-Bu₄N)₃[Ir(NCS)(SCN)₅] (monoclinic, space group P 2₁/a, a = 17.513(5), b = 32.607(5), c = 23.661(5) Å, β = 94.757(5)°, Z = 8) confirms the existance of a heteroleptic hexakis(thiocyanato(N)-thiocyanato(S))iridate(III) with an Ir? N distance of 2.03 Å and Ir? S bond lengths between 2.29 and 2.38 Å. The SCN groups with angles between 166 and 175° are nearly linear with Ir? S? C angles from 99.9 to 109.4°. The Ir? N? C angles of the two crystallographic independent anions are 166 and 174°.     

Comparative Thermogravimetric Studies of Poly(ether-ketone/sulfone) Imides and Their Parent Polymers: I. Poly(ether-ketone/sulfone) ethylimide

Thermogravimetry (TG) was employed to study the thermal degradation kinetics of poly(etherketone/sulfone)ethylimide (PEK-IE and PES-IE). The corresponding decomposition activation energies and reaction orders were obtained and the comparison was made with their parent polymerspoly(ether-ketone/sulfone) with Cardo group (PEK-C and PES-C). The results show that the degradation activation energies of PEK-IE and PES-IE were lower than that of PEK-C and PES-C; and two stages of the degradation process were found for all the four polymers. For PEK-IE and PES-IE, the activation energies in the first decomposition stage are much lower than that in the second stage and the two stages can be taken as slow induction and fast degradation, whereas for PEK-C and PES-C the activation energies in the first decomposition stage are larger than that in the second stage, and the two stages can both be taken as two fast degradation stages. The decomposition mechanism of the two stages was also speculated.This revised version was published online in November 2005 with corrections to the Cover Date.     

Darstellung,Kristallstrukturen, Schwingungsspektren und Normalkoordinatenanalyse von vier bindungsisomeren Tetrachlorodirhodanoosmaten(IV)

Preparation, Crystal Structures, Vibrational Spectra, and Normal Coordinate Analysis of Four Linkage Isomeric Tetrachlorodirhodanoosmates(IV) By treatment of cis- or trans-[OsCl₄I₂]^2? with (SCN)₂ in dichloromethane the linkage isomers cis-[OsCl₄(NCS)₂]^2? ( 1 ), trans-[OsCl₄(NCS)(SCN)]^2? ( 2 ), cis-[OsCl₄(NCS)(SCN)]^2? ( 3 ) and trans-[OsCl₄(SCN)₂]^2? ( 4 ) are formed which have been separated by ion exchange chromatography on diethylaminoethyl cellulose. The X-Ray structure determinations on single crystals of cis-(Ph₄As)₂[OsCl₄(NCS)₂] (triclinic, space group P1 , a = 10.019(5), b = 11.702(5), c = 21.922(5) Å, α = 83.602(5)°, β = 85.718(5)°, γ = 73.300(5)°, Z = 2), trans-(Ph₄As)₂[OsCl₄ · (NCS)(SCN)] (monoclinic, space group P2₁/c, a = 18.025(5), b = 11.445(5), c = 23.437(5) Å, β = 94.208(5)°, Z = 4), cis-(Ph₄As)₂[OsCl₄(NCS)(SCN)] (triclinic, space group P1 , a = 10.579(5), b = 11.682(5), c = 22.557(5) Å, α = 81.073(5)°, β = 85.807(5)°, γ = 87.677(5)°, Z = 2) and trans-(Ph₄As)₂ · [OsCl₄(SCN)₂] (triclinic, space group P1 , a = 10.615(5), b = 11.691(5), c = 11.907(5) Å, α = 111.314(5)°, β = 96.718(5)°, γ = 91.446(5)°, Z = 1) reveal the complete ordering of the complex anions. The via N or S coordinated thiocyanate groups are located nearly direct above one of the cis-positioned Cl ligands with Os? N? C angles of 171.2° and 174.3° ( 1 ), 162.3° ( 2 ), 172° ( 3 ) and Os? S? C angles of 108.3° ( 2 ), 105.7° ( 3 ) and 105.5° ( 4 ). Using the molecular parameters of the X-Ray determinations the low temperature (10 K) IR and Raman spectra of the (n-Bu₄N) salts of all four linkage isomers are assigned by normal coordinate analyses based on a modified valence force field. The valence force constants are f_d(OsN) = 1.59 ( 1 ), 1.67 ( 2 ), 1.60 ( 3 ) and f_d(OsS) = 1.27 ( 2 ), 1.31 ( 3 ) and 1.32 mdyn Å^?1 ( 4 ). Taking into account increments of the trans influence a good agreement between observed and calculated frequencies is achieved.     

Thermal Degradation of Poly(ε-caprolactone), Poly(L-lactic acid) and their Blends with Poly(3-hydroxy-butyrate) Studied by TGA/FT-IR Spectroscopy

Summary: The thermal degradation behavior of poly(ε-caprolactone) (PCL) and poly(L-lactic acid) (PLA) have been studied in different environment. It was found that these polymers undergo completely different degradation processes in nitrogen and oxygen atmosphere. In oxygen environment PCL and PLA mainly decompose to CO₂, CO, water and short-chain acids. In nitrogen atmosphere PCL releases 5-hexenioc acid, CO₂, CO and ε-caprolactone, whereas PLA decomposes to acetaldehyde, CO₂, CO and lactide. The polymer blends of poly(3-hydroxybutyrate) (PHB) with PCL and PLA decompose similar to the individual homopolymers with crotonic acid as the initial decomposition product of PHB.     

SYNTHESIS AND CHARACTERIZATION OF METAL COMPLEXES WITH AMPICILLIN

Abstract

The reaction, in water, of Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) ions with sodium ampicillinate at room temperature has allowed isolation of dimers with the following general formula [M(amp)Cl]₂ × nH₂O (n = 1.5?3.2). The complexes were characterized by elemental analyses, conductivity measurements, magnetic susceptibilities and spectroscopic methods (IR, Raman, EPR and UV-Visible). A dinuclear structure based on octahedrally coordinated metal ions is proposed.     

Silica gel surface modified with sulfanilamide for selective solid-phase extraction of Cu(II), Zn(II) and Ni(II)

A new chelating matrix has been prepared by immobilising sulfanilamide (SA) on silica gel (SG) surface modified with 3-chloropropyltrimethoxysilane as a sorbent for the solid-phase extraction (SPE) Cu(II), Zn(II) and Ni(II). The determination of metal ions in aqueous solutions was carried out by inductively coupled plasma optical emission spectrometry (ICP-OES). Experimental conditions for effective sorption of trace levels of Cu(II), Zn(II) and Ni(II) were optimised with respect to different experimental parameters using the batch and column procedures. The presence of common coexisting ions does not affect the sorption capacities. The maximum sorption capacity of the sorbent at optimum conditions was found to be 34.91, 19.07 and 23.62 mg g^?1 for Cu(II), Zn(II) and Ni(II), respectively. The detection limit of the method defined by IUPAC was found to be 1.60, 0.50 and 0.61 µg L^?1 for Cu(II), Zn(II) and Ni(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was 4.0% (n = 8). The method was applied to the recovery of Cu(II), Zn(II) and Ni(II) from the certified reference material (GBW 08301, river sediment) and to the simultaneous determination of these cations in different water samples with satisfactory results.     

Energy relationship and the polarization of C_(60) cage in the endohedral complexes (X@C_(60))

In this paper, we carry out the calculation on the system (X@C60)(X=Li, Na, K, Kb, Cs; F, Cl, Br, I), where the position of X changes along 5 typical symmetry directions. For the calculation of quantum chemistry we use EHMO/ASED method, for the calculation of molecular mechanics we use Buckingham potential (exp-6-1) function, and for the calculation of thermo-chemical cycle we use individually isolating the processes such as the structure variation, charge transfer and charge distribution, and their interactions etc. The calculation results show that (1) In the region of radius r≈0.2 nm of the Ceo cage, the potential field is nearly spherical; (2) Except for Li and Na, the systems are the most stable with minimum energies at the center of C60 cage. For Li and Na, the systems are the most stable with minimum energies at r≈0.16 nm and r≈0.13 nm, respectively. In view of the interactive region of chemical bonds, the interactions between X and the C60 cage do not belong to the classical chemical bonds; (     

Drei stereoisomere quadratisch-pyramidale [Ma3b2]-Komplexe: Untersuchungen zur Existenz und zur Struktur kristalliner Dimethylsulfoxid-Komplexe von Antimon- und Bismuttrichlorid

Three Stereoisomeric Square-Pyramidal Complexes [Ma₃b₂]: Investigations of the Existence and the Structures of Crystalline Dimethyl Sulfoxide Complexes of Antimony and Bismuth Trichlorides The formation of solid complexes MCl₃ · n DMSO (M = Sb, Bi; n = 1–4) was reinvestigated. In each system, only two of four presumptive complexes could be isolated as crystalline solids: SbCl₃ · DMSO ( 1 a ) was prepared for the first time, SbCl₃ · 2 DMSO ( 1 b ), BiCl₃ · 2 DMSO ( 2 b ) and BiCl · 3 DMSO ( 2 c ) were reproduced according to literature data. Evidence is presented as to the non-existence of BiCl₃ · 4 DMSO, contrary to previous claims in the literature. A unit cell determination showed 2 c to be structurally identical with the monomeric fac-octahedral complex BiCl₃(DMSO)₃ obtained fortuitously and described elsewhere [Z. anorg. allg. Chem. 620 (1994) 1037]. The compounds 1 a (monoclinic, space group P2₁/c), 1 b (monoclinic, space group P2₁/n) and 2 b (monoclinic, space group C2) represent examples of each of the three possible geometric isomers of a square-pyramidal complex [Ma₃b₂]. In the formally 1/1 adduct 1 a , which is in fact [Sb(1)Cl₃(DMSO)₂ · Sb(2)Cl₃], the Sb(1) atom of the complex unit displays square-pyramidal geometry with the DMSO ligands situated in the apical and one of the basal positions. These units are linked into chains by SbCl₃ molecules acting as Cl-acceptors. Sb(2) forms two chelating chloro-bridges with cis-Cl atoms of one neighbouring complex and a third chloro-bridge with the remaining Cl of the symmetry-related second neighbour. The resulting Cl₆-geometry around Sb(2) is distorted octahedral. 1 b consists of square-pyramidal molecules, in which the DMSO ligands occupy two basal cis-positions; the monomeric units are loosely linked through the apical Cl atoms to form a chain of octahedra sharing trans-vertices. The asymmetric unit of 2b is a square pyramid with trans-basal DMSO ligands. The pyramids are connected by symmetry-equivalent basal chlorine atoms into chains of octahedra sharing cis-vertices. 1a displays remarkably short Sb? O dative bonds (204.7/212.9 pm); the M? O bond distances of 1b and 2b are 223.0/234.6 and 234.5/238.7 pm, respectively.     

具有聚集诱导发光性质的近红外荧光染料

聚集诱导发光(AIE)现象的发现为解决传统有机荧光分子在高浓度和聚集形态下存在的荧光猝灭问题提供了最佳方案,并实现了在光电器件、化学传感、生物成像和靶向治疗等众多领域的广泛应用.随着对AIE 发光机理研究的不断深入,AIE 分子体系得到了极大的扩展.其中,一类具有给体-受体结构的AIE分子能够显著降低分子能隙,使发光分...