Chromatographic evaluation of some stationary phases based on poly(methyloctylsiloxane) immobilized onto silica

Several stationary phases were prepared by thermal immobilization of poly(methyloctylsiloxane) onto a silica surface using different amounts of poly(methyloctylsiloaxane), and different times and temperatures of immobilization to provide different carbon contents for the phases. The chromatographic properties were evaluated using the Tanaka test. Comparison of the results obtained with literature data using hierarchical cluster analysis showed dissimilarity with most of the commercial phases. Some basic pharmaceuticals, including six benzodiazepines were separated on one of the better PMOS phases.     

Poly(1-allylimidazole)-grafted silica,a new specific stationary phase for reversed-phase and anion-exchange liquid chromatography

A new specific stationary phase based on poly(1-allylimidazole)-grafted silica has been synthesized and characterized, by infrared spectra, elemental analysis, thermogravimetric analysis and X-ray photoelectron spectroscopy. The results of test showed that poly(1-allylimidazole) can effectively mask the residual silanol groups and reduce the adverse effect of residual silanol. Using this stationary phase, phenol compounds, aniline compounds, and polycyclic aromatic hydrocarbons were successfully separated with symmetric peak shapes in the reversed-phase chromatography. Inorganic anions (IO₃⁻, BrO₃⁻, Br⁻, NO₃⁻, I⁻, SCN⁻) were also separated completely in the anion-exchange chromatography using sodium chloride solution as the mobile phase. The effects of pH and the concentration of eluent on the separation of inorganic anions were studied. The separation mechanism appears to involve the mixed interactions of hydrogen bonding, hydrophobic, π–π, electrostatic, and anion-exchange interactions.     

奎宁功能化聚乙烯咪唑修饰硅胶亲水相互作用色谱固定相的制备及应用

通过表面自由基链转移聚合和亲核取代反应制备了一种新型奎宁功能化聚乙烯咪唑修饰硅胶亲水色谱固定相(Sil-PIm-Qn)。通过元素分析和红外光谱对该固定相进行表征,并在亲水相互作用色谱(HILIC)模式下对其进行了色谱性能评价。结果表明,该固定相对5种氨基酸、9种磺胺以及10种碱基核苷有较好的分离选择性。实验考察了流动相中有机相乙腈体积分数和水相中乙酸铵浓度对待分离物质保留行为的影响,并进一步对固定相分离的重复性进行了考察,其保留时间的相对标准偏差(RSD)为0.08%～2.30%(n=10)。该亲水色谱固定相制备方法简单,并且表现出了优异的亲水色谱分离性能,有望在磺胺类药物及生物样品中碱基核苷等亲水性物质的分离分析中有一定应用。     

Thermodynamic investigations on shape selective separation behaviors of poly(4-vinylpyridine)-grafted silica for polycyclic aromatic hydrocarbons in both normal-phase and reversed-phase high-performance liquid chromatography

With the successful implementation of poly(4-vinylpyridine)-grafted silica prepared by grafting-from approach (GF-VP(n)) as a stationary phase for the separation of polycyclic aromatic hydrocarbons (PAHs) in normal-phase HPLC, this paper describes the chromatographic retention behaviors of PAHs with GF-VP(n) in reversed-phase HPLC. Significantly higher retention factor along with enhanced shape selectivity were observed with GF-VP(n). Thermodynamic study on the retention behaviors of PAHs with GF-VP(n) in normal-phase and reversed-phase HPLC revealed that retention of PAHs was exothermic in both phases. Furthermore, higher entropic contribution was observed in reversed-phase HPLC compared to normal-phase HPLC.     

聚乙烯基咪唑/陶瓷复合膜的渗透汽化性能

通过自由基接枝聚合反应在硅烷化处理的沉积有SiO2活性层的无机陶瓷微孔膜上接枝乙烯基咪唑（VI）,经质子化后,制备出一种聚电解质亲水性有机-无机复合膜。用FT-IR表征了接枝PVI前后化学组成的变化;用TGA 测定了单体在二氧化硅粉末上的接枝率;用SEM观察了接枝反应前后膜表面形态的变化;系统研究了操作条件对膜的渗透汽化分离性能的影响。结果表明,这种膜用于醇/水、酸/水等水溶液的分离有很好的选择性和渗透性,膜的渗透性随操作温度的变化表现异常,结合SEM的结果可以推断有机单体主要是在无机膜的孔内接枝形成活性分离层。     

Poly(1-vinylimidazole) Prospects in Gene Delivery

Polymeric amines are being studied intensively as components of systems for gene delivery in genetic engineering and gene therapy of genetic disorders, including cancer. Despite remarkable achievements in the field, polymeric amines, such as polyethyleneimine, show some disadvantages. Strong interaction between the amine-containing polymer and nucleic acid hampers the release of nucleic acid in the cell cytoplasm. Amine groups can interact with the cell membrane which results in cell death. These limitations of polymeric amines stimulated an investigation of new structures for gene delivery. Imidazole-containing polymers have attracted attention as lesser basic substances, while they are able to interact with polymeric acids. Further development of imidazole-based gene delivery agents requires knowledge about some fundamental aspects of interaction between nucleic acids, and polymeric imidazoles. In this work, we studied the complexation of poly(1-vinylimidazole) and oligomeric DNA. We found that the number of active sites capable of binding with negatively charged phosphate groups is comparable with the number of protonated imidazole units in the case of high molecular weight polymer. The increase in polymer charge by 1-bromopropane quaternizating 1%?5% imidazole units or by decreasing the pH to 6.5?7 considerably increased the ability of poly(1-vinylimidazole) to interact with oligonucleotides. The pH sensitivity of this interaction is interesting for cancer gene therapy because the tumours have a lowered intercellular pH (stable oligonucleotide complex) and a higher extracellular pH which can lead to complex dissociation. Minimal critical length for complexation of quaternized poly(1-vinylimidazole) and DNA is below eight units which corresponds to polymers with amine groups. Fluorescence-tagged poly(1-vinylimidazole) samples were obtained and their potential for monitoring the polymer and polymer-oligonucleotide complex internalization into living cells was demonstrated.     

Entrapment of invertase in an interpenetrated polymer network of alginic acid and poly (1-vinylimidazole)

In this work, we have investigated the synthesis and characterization of a proton conductor based on alginic acid and poly (1-vinylimidazole). The polymer network was obtained by mixing alginic acid and poly (1-vinylimidazole) at various stoichiometric ratios. The polymer electrolytes were characterized by elemental analysis and FT-IR spectroscopy. Invertase was entrapped in the polymer networks during complex formation. Additionally, the maximum reaction rate and Michaelis-Menten constant were investigated for the immobilized invertase. The temperature and pH optimization, operational stability and shelf life of the polymer network were examined.     

Preparation and applications of weak acid cation exchanger based on monodisperse poly(ethylvinylbenzene-co-divinylbezene) beads

New technology is reported here for the synthesis of an effective weak acid-cation exchanger for ion chromatography. Monodisperse macroporous poly(ethylvinylbenzene-co-divinylbezene) (PEVB-DVB) beads of 5 microm diameter were prepared by a two-step swelling and polymerization method. Then carboxyl groups were introduced by polymerization of maleic anhydride with unreacted vinyl groups on the resin beads, followed by hydrolysis of the maleic anhydride groups. A column packed with the carboxylate beads was used to separate alkali and alkaline earth metal ions in a single isocratic run. Separations were found to be better than those with similar resin particles that are simply coated with maleic acid. The columns containing the new particles were 100% compatible with solvents commonly used for HPLC. Additionally, the prepared column was stable and could be used for a long time in a wide range of pH. The column gave good resolution, low detection limits and good repeatability for the separation of common cations. Satisfactory results were also obtained for separations of organic amines and of common cations in rainwater.     

Studies on synthesis and properties of poly(ferrocenyldimethylsilanes) and poly(ferrocenylmethylphenylsilanes)

Poly(ferrocenyldimethylsilane) and poly(ferrocenylmethylphenylsilane) have been prepared via the thermal ring-opening polymerization of the corresponding strained, silicon-bridged ferrocenophanes. It was found that the molecular weights of resultant polymers depend on the polymerization time. Their electrochemical behavior in aqueous electrolytes was investigated by cyclic voltammetry.     

pH-responsive poly(methacrylic acid)-grafted hollow silica vesicles

Poly(methacrylic acid)-grafted hollow silica vesicles (PMAA-g-hollow silica vesicles) were obtained through a grafting-from approach. PMAA brushes were formed by performing atom-transfer radical polymerisation of sodium methacrylate with an initiator attached to the hollow silica spheres. PMAA-g-hollow silica vesicles were characterised by using TEM, thermogravimetric analysis (TGA) and FTIR spectroscopy. pH-dependent ξ potential and (1)H NMR spectra of PMAA-g-hollow silica vesicles were measured, and the results indicated that MAA brushes in PMAA-g-hollow silica vesicles had a lower ionisation degree and low solubility in acidic aqueous solution, for example, pH 3.4, but a higher ionisation degree and high solubility when the pH was higher than 7. Also it was demonstrated that calcein blue and fluorescein isothiocyanate (FITC) labelled dextran (M(n):10 kDa) could be encapsulated in the interiors of the PMAA-g-hollow silica vesicles with a negligible amount in PMAA brushes at pH 2, and pH-triggered release of calcein blue and FITC-labelled dextran from PMAA-g-hollow silica vesicles was observed at pH 7.4.     

Preparation of magnetic poly(vinylimidazole‐co‐divinylbenzene) nanoparticles and their application in the trace analysis of fluoroquinolones in environmental water samples

Nanosized spherical magnetic poly(vinylimidazole‐co‐divinylbenzene) particles were synthesized and used as a sorbent for the enrichment of trace fluoroquinolones (FQs) from environmental water samples. A suspension polymerization procedure was used to prepare the sorbent. The magnetic sorbent was characterized by SEM, transmission electron microscopy, elemental analysis, and FTIR spectroscopy. Analysis of enrofloxacin, marbofloxacin, fleroxacin, lomefloxacin, and sparfloxacin in environmental water samples by the combination of the magnetic sorbent and HPLC with diode array detection was selected as a paradigm for the practical application of the new adsorbent. Several extraction conditions, including desorption solvent, extraction and desorption time, pH value, and ionic strength in sample matrix, were optimized. Results showed that the new sorbent had high affinity for FQs and could be used to extract them effectively. Under the optimum conditions, low detection (S/N = 3) and quantification (S/N = 10) limits were achieved for the target analytes, within the ranges of 0.20–1.46 and 0.68–4.84 μg/L, respectively. Method repeatability was achieved in terms of intra‐ and interday precisions, indicated by the RSDs, which were both <10.0%. The method also showed good linearity, simplicity, practicality, and environmental friendliness for the extraction of FQs. Finally, the developed method was successfully applied to the determination of FQs in lake water, surface water, and reservoir water samples. Acceptable recoveries of spiked target compounds in these water samples were in the range of 52.1–104.5%.     

SYNTHESIS AND PROPERTIES OF TWO POLY(PHENYL METHACYLATE)S FUNCTIONALIZED WITH PEDENT DIHYDROPYRIMID(THI)ONE GROUPS

New polymers with functionalized dihydropyrimidones were synthesized.The methacryloyl chloride was first reacted with 4-hydroxybenzaldehyde,and the affording aldehyde was upon the one-pot Biginelli reaction to afford new monomers with dihydropyrimidone as pending groups (M1,M2).Two new monomers were polymerized via radical polymerization to afford interesting color changeable polymers in different pH.The polymers were characterized by ~1H-NMR and IR methods.The color changeable properties were also inves...     

Surface derivatization of poly(p-phenylene terephthalamide) fiber designed for novel separation and extraction media

The surface derivatization of poly(p-phenylene terephthalamide) fiber was studied. The obtained surface-derivatized filaments were packed into a fused-silica capillary to evaluate its surface characteristics by using GC. As the stationary phase for GC the surface-derivatized fibers showed higher retention for alkanes and alkylbenzenes than that with the untreated Kevlar fiber. The improvements on the retention power and the peak shape were observed on the benzyl-modified fibrous stationary phase. The derivatized fibrous materials were also evaluated as the extraction medium in fiber-in-tube SPE, and the effect of the surface modification on the extraction power was compared to the parent fiber. The results indicated that the modified fiber possessed a higher extraction power than the untreated fiber. Based on the facts, the successful modification of the fiber surface was estimated.     

Determination of poly(ethylene glycol)s by both normal-phase and reversed-phase modes of high-performance liquid chromatography

A normal-phase HPLC system using an amino column has been developed to characterise oligomers of poly(ethylene glycol)s (PEGs) of average M_r 400 to 2000 with derivatisation by dinitrobenzoate. Normal-phase HPLC with gradient elution using ternary solvents of hexane, dichloromethane and methanol has produced a baseline resolution for oligomers of PEG 400, 600 and 1000, while PEG 1000 and 2000 were analysed by using binary solvents of acetonitrile and water. Mixtures of PEGs have been determined by these HPLC systems. PEG 400 in a textile finish has also been determined with satisfactory recovery. It has been found that the hydroxyl group of solvents in normal-phase HPLC plays an important role in resolution and retention of PEG oligomers. Derivatisation efficiency for PEGs by dinitrobenzoyl chloride and quantitative determination of derivatised PEGs by HPLC have been studied. A reversed-phase (RP) mode of HPLC was examined for determination of PEG 400 oligomers. The normal-phase system provided greater resolution for oligomers of PEGs.     

Effect of molecular weight on the polymorphic transformation of isotactic poly(1-butene)

The effect of molecular weight on the polymorphic transformation of isotactic poly(1-butene)(iPB) under room temperature had been investigated by fourier transform infrared spectroscopy(FT-IR). The phase transformation time, phase transformation rate and phase transformation time difference between phase I and phase II at a given transformation degree were used to analysis the phase transformation kinetics of iPB aging at room temperature. The results show that the reduction of phase II can occur quickly at room temperature and seem less dependent on the molecular weight. However, the molecular weight has great effect on the formation of phase I. When the phase transformation degree for phase I reach 90%, a distinct transformation time difference can be observed. In order to clearly explain the difference in the reduction of phase II and the growth of phase I, a phase transformation model from the chain conformation level for iPB with different molecular weight have been drawn. DSC analysis was used to support the proposed model.     

Thermal and crystallization characteristics of poly(trimethylene terephthalate)/poly(ethylene naphthalate) blends

Poly(trimethylene terephthalate) (PTT)/poly(ethylene naphthalate) (PEN) blends were miscible in the amorphous state in all of the blend compositions studied, as evidenced by a single, composition-dependent glass transition temperature (T_g) observed for each blend composition. The variation in the T_g value with the blend composition was well predicted by the Gordon-Taylor equation, with the fitting parameter being 0.57. The cold-crystallization peak temperature decreased with increasing PTT content, while the melt-crystallization peak temperature decreased with increasing amount of the minor component. The subsequent melting behavior after both cold- and melt-crystallization exhibited melting point depression, in which the observed melting temperatures decreased with increasing amount of the minor component. During melt-crystallization, both components in the blends crystallized concurrently just to form their own crystals. The blend with 60% w/w of PTT exhibited the lowest total apparent degree of crystallinity.     

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide),PEG-b-(PNIPAM)_2,were successfully synthesized through atom transfer radical polymerization(ATRP).A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly(ethylene glycol) monomethyl ether(PEG).The copolymers were obtained via the ATRP of N-isopropylacrylamide(NIPAM) at 30℃with CuCl/Me_6TREN as a catalyst system and DMF/H_2O(v/v = 3:1) mixture as solvent.The resulting copo...     

Determining the vinyl alcohol distribution in poly(vinyl butyral) using normal-phase gradient polymer elution chromatography

The application of film-forming organic polymers, which are in common use in membrane technology, as chromatographic adsorbents for packed and capillary columns has been suggested. The chromatographic characteristics of poly[1-(trimethylsilyl)-1-propine] (PTMSP) as an adsorbent were studied. The film-forming properties of PTMSP simplify manufacturing of capillary and packed gas–solid columns. It was shown that separation of C₁–C₄ hydrocarbon gases on the columns with PTMSP is of practical interest. In the authors’ opinion, PTMSP is also promising for the separation of inorganic gases.     

Copolymer of poly(4-vinylpyridine)-g-poly(ethylene oxide) respond sharply to temperature, pH and ionic strength

The stimuli-responsive copolymers with poly(ethylene oxide) (PEO) as side chain were prepared by free-radical copolymerization of methacrylamide end-capped PEO macromonomer and 4-vinylpyridine (4VP). Phase transition behavior of these copolymers of poly(4-vinylpyridine)-g-poly(ethylene oxide) (P4VP-g-PEO) was investigated as a function of polymer concentration, temperature, pH and ionic strength by monitoring the turbidity of the polymer solutions. The copolymers displayed sharp response to temperature and pH. The LCST of P4VP-g-PEO copolymer increased with the increase of PEO content and decreased with increasing pH due to the deprotonation of the pyridine ring, indicating well-tunable LCST. In addition, the LCST of P4VP-g-PEO9 presented a unique phase transition behavior with varying salt concentration, showing a minimum with 1 M NaCl solution at pH 6.0.     

Preparation of telechelic oligomers by controlled thermal degradation of isotactic poly(1-butene) and poly(propylene-ran-1-butene)

It was found that telechelic isotactic oligo(1-butene) and telechelic oligo(propylene-ran-1-butene) could be isolated as nonvolatile oligomers from polymer residues resulting from the thermal degradation of isotactic poly(1-butene) and poly(propylene-ran-1-butene), respectively. Their structures were determined by ¹H and ¹³C NMR with attention being paid to their reactive end groups. The maximum average number of terminal vinylidene groups per molecule (f_TVD) was 1.8, indicating that about 80 mol% were α,ω-diene oligomers having two terminal vinylidene groups. This useful new telechelic oligomer had a lower polydispersity than the original polymer, in spite of its lower molecular weight and T_m. The composition of end groups of nonvolatile oligomers obtained by thermal degradation of poly(propylene-ran-1-butene) could be explained by the differences in bond dissociation energy and activation energy of elementary reactions during thermal degradation, based on the monomer composition of the original polymer.