二十四面体Pt纳米晶电极上甲酸解离吸附反应动力学研究

研究了甲酸在二十四面体Pt纳米晶（THHPtNCs）电极表面解离吸附反应过程.电化学原位红外反射光谱结果显示,甲酸在低电位（-0.20V（SCE））即可在THHPtNCs电极上氧化到CO2,同时发生分子内化学键断裂生成吸附态CO物种.运用程序电位阶跃暂态方法定量研究甲酸解离吸附反应动力学,测得5×10^-3mol·L^-1 HCOOH＋0.1mol·L^-1 H2SO4溶液中甲酸在THHPtNCs电极上解离吸附的最大平均速率υamax为13.19×10^-10mol·cm^-2·s^-1,是商品Pt/C催化剂电极上υamax的1.5倍.研究结果揭示了THHPtNCs的反应活性显著高于Pt/C催化剂.     

Specific features of interaction between formic acid and oxygen adsorbed on smooth polycrystalline platinum: Transients of the open-circuit potential

Transients of the open-circuit potential, which are observed when formic acid is interacting wit adsorbed oxygen (O_ads) preliminarily accumulated on polycrystalline “smooth” platinum (pcPt), are measure in an aqueous solution of sulfuric acid. It is shown that, as with platinized platinum (Pt/Pt), at large coverage by adsorbed oxygen (θ_O = 1?0.8), adsorbed oxygen interacts directly with molecules of formic acid from solution. In the region of medium coverages (θ_O = 0.8?0.2), on the other hand, a mechanism of “conjugated reactions” is realized. It is established that, in the case of pcPt, the direct interaction of O_ads with molecules of HCOOH from solution proceeds slower by nearly three times and the interaction via the mechanism of “conjugated reactions,” faster by about three times, as compared with Pt/Pt.     

钯纳米晶体在电催化甲酸氧化反应中的形貌效应

本文基于课题组前期工作,选用适当的金属前驱物、还原剂、稳定剂和保护剂,通过调控氧化刻蚀和反应动力学等,成功合成了形貌和尺寸均不相同的Pd纳米晶.经过认真的纳米粒子清洗和电极修饰组装,考察了它们在电催化甲酸氧化反应中的形貌与性能的关系.研究结果表明,Pd纳米晶样品的最大电流密度以纳米八面体（nanooctahedra）、纳米线（nanowires）、纳米立方体（nanocubes）、纳米瓜子（nanotapers）、凹面纳米立方体（concave nanocubes）的顺序递增,催化甲酸氧化反应的起始氧化电位均小于0.2V.研究结果印证了Pd纳米晶催化甲酸氧化反应的催化性能在尺寸效应上主要受活性表面积的影响,扣除表面积效应后的催化性能与其尺寸没有明确关系.该系列Pd纳米晶的催化性能主要取决于其表面结构,得出Pd纳米晶催化甲酸氧化反应遵循{111}晶面〈{100}晶面〈高指数晶面的性能活性顺序.综合最大电流密度和最小操作电位因素发现,Pd凹面纳米立方体和Pd纳米瓜子具有相对较好的商用价值.     

Synthesis and in situ FTIRS characterization of conducting polymers obtained from aminobenzoic acid isomers at platinum electrodes

The electrochemical homo-polymerization of o-, m- and p-aminobenzoic acids has been performed on Pt electrodes in perchloric acid aqueous medium by cyclic scanning of the potential. Different limit potentials were employed to obtain thin polymeric films. When the switching potential was extended beyond the respective monomer oxidation peak, a rather degraded material was obtained. In situ FTIR spectroscopy has been used to characterize the redox response of films synthesized at the lower potential limits. Characteristic absorption features related with benzenoid and quinoid rings and different types of C-N bonds suggest the presence of redox processes similar to those undergone by the parent compound polyaniline. In addition, the existence of a chemical interaction between -COOH and -NH- groups in the reduced state of the three homopolymers studied can be suggested. Carbon dioxide has been detected at potentials higher than 1.0 V (RHE) irrespective of the polymeric material, thus indicating its degradation.     

Identification of adsorption forms by ir spectroscopy for formaldehyde and formic acid on K3PMo12O40

Interaction of HCOOH and H₂CO with K₃PMo₁₂O₄₀ has been studied by IR spectroscopy. HCOOH adsorbed mainly in molecular form due to hydrogen bonds with surface oxygen ions. Two forms of adsorbed H₂CO were observed depending on the pressure. At low pressures it adsorbed on Br?nsted acid sites with the formation of hydrogen-bonded complexes. Dioxymethylene groups and a small amount of polyoxymethylene groups were formed at higher pressures. In contrast to oxide catalysts, formates were formed only in small amounts in the absence of oxygen. This can be explained by the formation of new surface adsorption sites Mo ions-due to a partial reduction of K₃PMo₁₂O₄₀ during its interaction with HCOOH and H₂CO.     

粗糙铂电极上甲酸吸附氧化的电化学原位表面增强拉曼光谱研究

采用循环伏安法和电化学原位表面增强拉曼光谱（SERS）技术研究甲酸的解离 及附与氧化行为。首次报道了甲酸吸附、解离和氧化的电化学原位SERS谱，发现甲 酸在粗糙铂电极上能自发解离吸附；首欠成功地获得了粗糙铂电极上甲酸吸附解离 的强吸附中间体CO和活性中间体COOH的表面增强拉曼光谱，同时首次检测到甲酸氧 化最终产物CO_2的拉曼光谱信号，从分子水平证实甲酸解离吸附反应的双途径机理 。     

A HREELS study of the adsorption of formic acid on slightly oxidized Nb(110) surface

An investigation has been made on the adsorption and decomposition of formic acid on slightly oxidized Nb(110) surface (0/Nb atom ratio = 0.2) using high resolution electron energy loss spectroscopy (HREELS),and a corresponding surface reaction mode is given.At 140 K,formic acid of low exposure on such an Nb(110) surface decomposed to formate,which bonded on Nb in monodentate configuration,simultaneously some formate decomposed to CO,which adsorbed on the surface.Formic acid multilayers formed when the exposure was high.While the temperature was increased to above 190 K,multilayer formic acid desorbed,and the surface was covered with mon-odentate-bonded formate and CO.In the temperature range of 250-300 K,chemisorbed formate changed from monodentate configuration into bridging configuration and CO molecules disappeared.The decomposition of formate at higher temperatures led to the oxidation of Nb.The formate formed in the high exposure case was so stable that it did not decompose even the temperature wa     

Kinetics of dissociative adsorption on stepped surfaces of platinum

The kinetics of dissociative adsorption of oxygen was studied by the Monte Carlo method for a model which supposed that absorption occurs with a high rate only on steps and that O_ads may migrate from steps onto terraces and backward. At the relatively low activation energy of diffusion from steps onto terraces E_dif∼ 75 kJ/mol (E_dif is lower by 4 kJ/mol in the back direction), the function log(s(θ)), wheres is the sticking coefficient and θ is the surface coverage by oxygen atoms, is almost linear at 300 K; that is, the Roginskii-Elovich adsorption equation is obeyed. If it is supposed that the bonding energy of adatoms on terraces is slightly higher than that on steps, and the sticking coefficient is constant and equal to s₀ up to high degrees of coverage as well as in the model of the kinetics of adsorption with a precursor state. Deceased.     

Transients of the Open-Circuit Potential Observed during the Interaction of Formic Acid with Preliminarily Adsorbed Oxygen on a Platinized Platinum Electrode

Transients of the open-circuit potential, which are observed during the interaction of formic acid with preliminarily adsorbed oxygen (O_ads) on a Pt/Pt electrode in 0.5 M H₂SO₄, are measured. It is established, by means of the method of cathodic potentiodynamic pulses, that the slowest interaction of formic acid with O_ads occurs in the region of large coverages of the electrode surface by oxygen (θ_O ∼1–0.8). A presumption is put forward that the process rate in this region is defined by a direct reaction of O_ads with molecules of formic acid from the bulk solution. It is shown that the interaction of formic acid with O_ads in the region of intermediate coverages (θ_O ∼ 0.8–0.2) proceeds via a mechanism of “conjugated reactions.” Transients of the open-circuit potential for formic acid are compared to transients for carbon monoxide obtained in analogous conditions. The substantially shorter overall time of potential decay in the case of CO (at the same concentrations) is caused by a faster reaction of CO with adsorbed oxygen in the region of large θ_O. The difference is explained by assuming that the HCOOH adsorption as opposed to CO bears a dissociative character.__________Translated from Elektrokhimiya, Vol. 41, No. 8, 2005, pp. 936–942.Original Russian Text Copyright © 2005 by Manzhos, Maksimov, Podlovchenko.     

Enhanced electro-oxidation of formic acid by a PdPt bimetallic catalyst on a CeO2-modified carbon support

PdPt bimetallic catalysts that employ CeO2-modified carbon black as a support have been prepared using an organic colloidal method.PdPt/CeO2-C shows excellent performance toward the anodic oxidation of formic acid.The effects of varying both Pd to Pt ratio and CeO2 content have been investigated.The optimal Pd to Pt atomic ratio is 15,indicating that addition of small amounts of Pt can significantly enhance the activity of the catalyst.When the CeO2 content in the catalyst reaches as high as ～15 wt.%,the catalyst shows the maximum activity.Adding CeO2 not only enhances the catalytic activity of the material,but may also change the mechanism of its catalysis of the anodic oxidation of formic acid.Pd15Pt1/15CeO2-C exhibited 60% higher activity than Pd/C,and had a negative shift in onset potential of more than 0.1 V.Based on characterization by X-ray diffraction,X-ray photoelectron spectroscopy,thermogravimetric analysis and transmission electron microscopy,the interactions between the components are revealed and discussed in detail.     

铂单晶电极表面不可逆反应动力学I.Pt(100)单晶电极上甲酸氧化的现场红外反射光谱研究

运用电化学暂态方法和现场时间分辨ＦＴＩＲ反射光谱研究甲酸在Ｐｔ（１００）单晶电极上的解离吸附和氧化过程,深入认识了甲酸解离吸附的反应速率在－０．２５至０．２５Ｖ电位区间呈火山形变化的规律。根据电化学现场时间分辨红外光谱的研究结果,提出在研究反动力学时避免甲酸解离吸附干扰的方法,为进一步研究甲酸在Ｐｔ（１００）电极表面经活性中间体直接氧化至ＣＯ２的反应动力学奠定了基础。     

Kinetics of rhenium dioxide deposition on columnar structured platinum electrodes

The kinetics concerning the early stage of the electrodeposition of rhenium dioxide on columnar-structured platinum electrodes from acid aqueous containing perrhenate ions was studied. The results demonstrate a zero-order kinetics obtained by holding the potential at two different values.     

CeO_2修饰炭载体负载PdPt二元合金催化剂及其在甲酸氧化电催化中的应用

用CeO2修饰炭粉做载体,使用有机溶胶法还原PdPt二元合金的方法制备了一系列PdPt/CeO2-C催化剂.借助电化学测试,探讨催化剂中不同Pd与Pt原子比例的PdPt二元合金和不同含量的CeO2对于甲酸电氧化催化活性的影响.不断减少PdPt合金中Pt的比例可以促使甲酸氧化的起始电位前移,当Pd：Pt=15：1时氧化电流出现极值;同时,随着催化剂中CeO2含量的增加,催化剂对于HCOOH氧化的电流密度增加,当含量为15%时达到最大值.相对于Pd/C催化剂,在Pd15Pt1/15CeO2-C催化剂表面的甲酸氧化反应起始电位负移至少0.1V,氧化的电流密度提高60%以上.结合X射线衍射（XRD）,X射线光电子能谱（XPS）,透射电镜（TEM）和热重（TG）等测试数据可以发现,当极少量的Pt与Pd形成合金,Pt与Pd之间产生电子效应,使得合金表面HCOOH氧化的过电位降低;而CeO2的添加不仅有助于PdPt二元合金的分散,更有可能改变甲酸在PdPt表面的氧化反应路径,发挥双功能机理.     

nitial Potential" Effect on the Dissociative Adsorption of Methanol on A Roughened Platinum Electrode in Acidic Solution

The research of electrocatalytic oxidation of small organic molecules such as methanol, formaldehyde and formic acid has been fascinating electrochemists for more than thirty years, owing to its significance in energy conversion and reaction mechanisms. The surface adsorbed species involved in these electrocatalytic reactions, especially reactive and poisoning intermediates, have been investigated by electrochemical, spectroscopic and other physicochemical methods1. However, Raman spectrosco…     

Kinetics and mechanism of interaction between methanol and adsorbed oxygen on a smooth polycrystalline platinum electrode: Transients of the open-circuit potential

The method of transients of the open-circuit potential, combined with cathodic potentiodynamic pulses, is used for studying the methanol interaction with preliminarily adsorbed oxygen (O_ads) in 0.5 M H₂SO₄. It is established that, for the larger part of the time period required for a full reduction of a monolayer of O_ads in solutions of methanol on polycrystalline platinum, the process occurs at large coverages of the surface by O_ads (?_O). In the region of medium coverages, transients of the open-circuit potential are accurately described by the equation that corresponds to the mechanism of “conjugated reactions.” The mechanism of the methanol interaction with O_ads happens to be close to that for formic acid, which is explained by a dissociative character of these HCO compounds. Kinetic parameters characterizing the methanol reaction with O_ads in the region of large and medium coverages are determined and analyzed.     

Long‐Lasting Oscillations in the Electro‐Oxidation of Formic Acid on PtSn Intermetallic Surfaces

Even when in contact with virtually infinite reservoirs, natural and manmade oscillators typically drift in phase space on a time‐scale considerably slower than that of the intrinsic oscillator. A ubiquitous example is the inexorable aging process experienced by all living systems. Typical electrocatalytic reactions under oscillatory conditions oscillate for only a few dozen stable cycles due to slow surface poisoning that ultimately results in destruction of the limit cycle. We report the observation of unprecedented long‐lasting temporal oscillations in the electro‐oxidation of formic acid on an ordered intermetallic PtSn phase. The introduction of Sn substantially increases the catalytic activity and retards the irreversible surface oxidation, which results in the stabilization of more than 2200 oscillatory cycles in about 40 h; a 30–40‐fold stabilization with respect to the behavior of pure Pt surfaces. The dynamics were modeled and numerical simulations point to the surface processes underlying the high stability.