Influence of the preparation method on the physicochemical properties of econazole-β-cyclodextrin complexes

Econazole (C₁₈H₁₅Cl₃N₂O) is one of the common antifungal agents whose poor aqueous solubility restricts its use for the treatment of oropharyngeal candidiasis, which is the first symptom of HIV infection. Therefore, the aim of the current study was to investigate the effect of different preparation methods (i.e. kneading, coevaporation, sealed-heating, and supercritical carbon dioxide (SC CO₂)) for obtaining solid inclusion complexes between β-cyclodextrin and econazole. The physico-chemical properties of the different products were characterized by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and powder X-ray diffractometry (PXRD). For the complexes prepared by the SC CO₂ method, the effects of temperature and pressure have also been investigated and related to the solubility of econazole in SC CO₂. Results suggested the validity of the SC CO₂ method for preparing solid complexes between cyclodextrins and econazole, avoiding the use of organic solvents and problems of their complete removal. Moreover, temperature played a major role in promoting drug-carrier interactions, whereas pressure had limited effects.     

Solubility-dependent complexation of active pharmaceutical ingredients with trimethyl-β-cyclodextrin under supercritical fluid condition

The effect of the solubility of active pharmaceutical ingredients (APIs) in supercritical carbon dioxide (SC-CO₂) on their complexation behavior with trimethyl-β-cyclodextrin (TM-β-CD) has been investigated. Flurbiprofen or naproxen, the solubility of which is lower than that of ibuprofen, was mixed with TM-β-CD and the complexation phenomena on SC-CO₂ processing was evaluated using powder X-ray diffraction, differential scanning calorimetry and IR measurement. Drug complexation depended both on SC-CO₂ treatment time and on drug solubility in CO₂. The inclusion complex formation of flurbiprofen with TM-β-CD proceeded slowly compared with the case of ibuprofen. The slower complexation behavior was also observed when naproxen was used as the guest molecule. These results indicate that dissolution of drug molecules in SC-CO₂ is a rate-determining step for the inclusion complex formation with TM-β-CD and that complexation proceeds after dissolving the both components in SC-CO₂.     

Extraction of atabron residues from cabbage with supercritical carbon dioxide

Summary In this work we present a new procedure for extraction of Atabron residues from cabbage samples using supercritical carbon dioxide. The results obtained with this procedure were compared with those obtained using traditional extraction methods for Atabron residues. The extraction yields found by both procedures are similar but SFE has several advantages, especially higher speed, greater economy, better selectivity and greater reproducibility.     

Efficient synthesis of isoindoles using supercritical carbon dioxide

Bicyclopyrroles were efficiently converted to the corresponding isoindoles by a retro Diels-Alder reaction in supercritical carbon dioxide. By adding ethylene gas as an oxygen scavenger, the isoindole yield was further improved.     

Solubility of iodopropynyl butylcarbamate in supercritical carbon dioxide

Supercritical carbon dioxide has been considered an appropriate alternative for extraction and purification process of cosmetics, pharmaceuticals, food supplements and natural products. Solubility information of biological compounds is essential for choosing supercritical fluid (SCF) processes. The solubility of iodopropynyl butylcarbamate (IPBC), a fungicide and anti-dandruff agent, was measured in supercritical carbon dioxide with a high pressure apparatus equipped with a variable volume view cell at 313.15, 323.15, and 333.15 K and at pressure between 80 and 35 MPa. The experimental data were correlated well with Peng–Robinson equation of state (PR EOS) and quasi-chemical nonrandom lattice fluid model.     

Measurement and correlation of solubility of artemisinin in supercritical carbon dioxide

Artemisinin is an effective antimalarial drug isolated from the herbal medicine Artemisia annua L. Supercritical fluid extraction is an environment-friendly method for the extraction of artemisinin. In this work, the solubility of artemisinin in supercritical carbon dioxide was determined by static method at three temperatures of 313 K, 323 K, 333 K and pressures from 11 to 31 MPa. The range of experimental solubility data was from 0.498 × 10⁻³ to 2.915 × 10⁻³ mol/mol under the above-mentioned conditions. Two density-based models (Chrastil and Mendez–Santiago–Teja models) were selected to correlate the experimental data of this work, and the average absolute relative deviation (AARD) was 8.32% and 8.33%, respectively. The correlation results showed good agreement with the experimental data.     

Lewis acids catalyzed ring-opening reactions of methylenecyclopropanes and epoxides in supercritical carbon dioxide or modified supercritical carbon dioxide with perfluorocarbon

The reactions of methylenecyclopropanes (MCPs) and epoxides with alcohols and aromatic amines can be carried out in supercritical carbon dioxide (scCO₂) or modified scCO₂ with perfluorocarbon which offer a way to synthesize various alcohols, amino-alcohols, homoallylic ethers, and amines under an environmentally benign condition.     

Diffusion coefficients of metal acetylacetonates in supercritical carbon dioxide

Binary diffusion coefficients, D₁₂, of the metal acetylacetonates, palladium(II) acetylacetonate and cobalt(III) acetylacetonate, were measured from 308.2 to 343.2 K over the pressure range from 9 to 40 MPa at infinite dilution in supercritical carbon dioxide using the chromatographic impulse response method. The effects of pressure, temperature, density, and viscosity on D₁₂ values were examined. It was observed that the D₁₂ values of palladium(II) acetylacetonate and cobalt(III) acetylacetonate were larger than those of lipids with similar molecular weights, such as arachidonic acid and monoolein, respectively. Furthermore, the measured D₁₂ data of each metal acetylacetonate were well correlated by the hydrodynamic equation D₁₂/T as a function of carbon dioxide viscosity.     

Solubilities of cinnamic acid,phenoxyacetic acid and 4-methoxyphenylacetic acid in supercritical carbon dioxide

The solid solubilities of cinnamic acid, phenoxyacetic acid and 4-methoxyphenylacetic acid in supercritical carbon dioxide were measured using a semi-flow apparatus. The experiments were taken at 308.2, 318.2 and 328.2 K. The pressure range was from 11 to 24 MPa. These data were confirmed as equilibrium solid solubilities based on a plug flow mass transfer model. The solid solubilities were further correlated using the equations of state or semi-empirical models. The correlation results are satisfactory with optimally fitted binary interaction parameters in the Peng–Robinson equation of state.     

Measurement and correlation of solubility of anthraquinone dyestuffs in supercritical carbon dioxide

Solubility data of 1,4-diaminoanthraquinone (C.I. Disperse Violet 1) and 1,4-bis(ethylamino)anthraquinone (C.I. Solvent Blue 59) in supercritical carbon dioxide (sc-CO₂) have been measured at the temperatures of (323.15, 353.15, and 383.15) K and over the pressure range from (12.5 to 25.0) MPa by a flow-type apparatus. The solubility of two anthraquinone dyestuffs was obtained over the mole fraction ranges of (1.3 to 26.1) · 10⁻⁷ for 1,4-diaminoanthraquinone (C.I. Disperse Violet 1) and (1.1 to 148.5) · 10⁻⁷ for 1,4-bis(ethylamino)anthraquinone (C.I. Solvent Blue 59). The experimental results have been correlated with the empirical equations of Mendez-Santiago–Teja and Kumar–Johnston expressed in terms of the density of sc-CO₂, and also analyzed thermodynamically by the regular solution model with the Flory–Huggins theory and the Peng–Robinson equation of state modified by Stryjek and Vera (PRSV-EOS) with the conventional mixing rules. Good agreement between the experimental and calculated solubilities of the dyestuffs was obtained.     

Measurement and correlation of solubility of benzamide in supercritical carbon dioxide with and without cosolvent

The experimental equilibrium solubility of benzamide in supercritical carbon dioxide was measured at temperatures between 308 K and 328 K and for pressures from 11.0 MPa to 21.0 MPa using a dynamic flow method. The effects of three cosolvents - ethanol, acetone and ethylene glycol, were investigated at a cosolvent molar concentration of 3.5%. The results showed that the solubility was enhanced by the presence of the three cosolvents, and ethanol exhibited the highest cosolvent effect. The solubility data in the absence and presence of cosolvents were correlated by two density-based models. The calculated results showed satisfactory agreement with the experimental data.     

Iridium-catalyzed asymmetric hydrogenation of imines in supercritical carbon dioxide using phosphite-type ligands

A series of chiral phosphite-type ligands has been evaluated in the iridium-catalyzed asymmetric hydrogenation of acyclic arylimines in supercritical CO₂. High reactivities (100% conversion in 50-120 min) and enantioselectivities (up to 95%) were obtained.     

Measurements for the solid solubilities of antipyrine, 4-aminoantipyrine and 4-dimethylaminoantipyrine in supercritical carbon dioxide

The solid solubilities of three active pharmaceutical ingredients (APIs) of antipyrine, 4-aminoantipyrine and 4-dimethylaminoantipyrine in supercritical carbon dioxide were measured by a semi-flow apparatus. The experiments were taken at 308.2, 318.2 and 328.2 K. The pressure range was from 10 to 22 MPa. These experimental results were correlated by the semi-empirical models of Mendez–Santiago–Teja and Chrastil. A solution model was also employed to fit the measured data. The average absolute relative deviation in solid solubility from semi-empirical models was 4–6%, and that from the solution model was 5–8%. The measured data satisfied the self-consistency test, and the parameters in the semi-empirical models are feasible for data extrapolation.     

Studies on the oxidative degradation of nylons by nitrogen dioxide in supercritical carbon dioxide

Oxidative degradation of nylons was carried out using nitrogen dioxide (NO₂) as the oxidizing agent and supercritical carbon dioxide (scCO₂) as the reaction medium. Seven typical nylons were studied: three ring opening polymerization type nylons (nylon-6, -11 and -12) and four condensation co-polymerization type nylons (nylon-4/6; -6/6; -6/9 and -6/12). All the nylons decomposed in the NO₂/scCO₂ system under relatively mild conditions (140 °C, 1 h, and 10 MPa) and provided aliphatic α, ω-diacids such as succinic, glutaric and adipic acids in good yields. The product distribution of these α, ω-diacids strongly depended on the reaction conditions such as temperature, time and amount of NO₂, but not on the total pressure. Furthermore, the proportions of the products were affected by the type of nylon. A mechanism is proposed and a detailed discussion regarding the degradation of nylon in the NO₂/scCO₂ system is provided.     

Dry ice-originated supercritical and liquid carbon dioxide extraction of organic pollutants from environmental samples

Packed in a high-pressure vessel and under calculated conditions, dry ice can be used as a source of carbon dioxide for supercritical CO₂ extraction or liquid CO₂ of organic compounds from environmental samples. Coupled with a fluid modifier such as toluene, dry ice-originated supercritical CO₂ (Sc CO₂) achieves quantitative extraction of many volatile organic compounds (VOCs) and semivolatile organic compounds (SOCs) including polycyclic aromatic hydrocarbons (PAHs), n-alkanes, and polychlorinated biphenyls (PCBs) from solid matrices. Compared to contemporary manual or automated supercritical fluid extraction (SFE) technologies, this novel technique simplifies SFE to a minimum requirement by eliminating the need of a high-pressure pump and any electrical peripherals associated with it. This technique is highly suitable to analytical areas where sample preservation is essential but difficult in the sampling field, or where sample collection, sample preparation, and analysis are to be done in the field.     

Palladocarbosilane dendrimers as catalysts for the asymmetric hydrovinylation of styrene in supercritical carbon dioxide

The palladocarbosilane dendrimers 2 and 3, containing the P-stereogenic phosphine [P(2-biphenylyl)PhCH₂] fragment, and the model compound Me₃Si(P(2-biphenylyl)PhCH₂)(PdCl(η³-2-MeC₃H₄)), 1, were tested as precatalysts in the hydrovinylation of styrene, in supercritical CO₂ medium. Na[BARF] was used as a cocatalyst. In all cases, the activity was somewhat less than that observed in CH₂Cl₂, but the selectivity and enantiomeric excess were excellent and comparable with the results obtained using the conventional solvent.     

Measurements of the solubilities of derivatized amino acids in supercritical carbon dioxide

The solubilities of phenylalanine and tyrosine in supercritical carbon dioxide (SCCO₂) were measured after derivatization as the N-acetyl amino acid ethyl ester, N-carbobenzoxy amino acid and N-acetyl amino acid. Using an SCCO₂ flow system, a measuring method of the saturated solubilities of the derivatized amino acids was established in which the contact height of the extraction cell, i.e. a packed column, is increased till the concentration of a derivatized amino acid at the exit of the cell reaches a plateau. The solubilities of N-acetyl phenylalanine ethyl ester (APEE) exceeded 0.001 mole fraction, which is higher than those of caffeine produced in industrial SCCO₂ processes. A possible way of separating the amino acid mixtures using polarity differences in different amino acid side chains was demonstrated using the solubility data of the N-acetyl-amino acid ethyl esters in SCCO₂, as the solubilities of APEE are higher than those of N-acetyl tyrosine ethyl ester by two orders of magnitude.     

Palladium‐catalyzed carbonylation of primary amines in supercritical carbon dioxide

The chemoselectivity of the palladium‐catalyzed carbonylation of amines was affected by the addition of MeOH in supercritical carbon dioxide. The results show different selectivity in supercritical carbon dioxide CO₂(sc) from that in alcohol. Methyl carbamate and its derivatives were obtained in high yields in CO₂(sc).     

Solubility of disperse yellow 54 in supercritical carbon dioxide with or without cosolvent

Extraction of disperse yellow 54 with supercritical carbon dioxide was conducted at 393.2 K and 30 MPa over a wide range of contact times. Saturated solubilities of the disperse dyestuff in supercritical carbon dioxide with or without cosolvent were also measured over the temperature and pressure ranges of 353.2 K to 393.2 K and 15 MPa to 30 MPa. Either ethanol or dimethyl sulfoxide, up to 5 mol%, was used as a cosolvent. As evidenced from the experimental results, the magnitudes of equilibrium solubility can be effectively enhanced in the presence of both two cosolvents. Dimethyl sulfoxide was found to yield higher solubility enhancement. Cosolvent effects were discussed on the basis of the Kamlet-Taft solvatochromic solvent parameters of cosolvents. The saturated solubility data were correlated with the Chrastil and the Mendez-Santiago and Teja equations. The Chrastil model correlated the solubility data to about within the experimental uncertainty. The correlated results of the Mendez-Santiago–Teja model supported the consistency of the solubility data over the entire experimental conditions.     

Enzymatic resolution of trans-2-hydroxycyclohexanecarbonitrile in supercritical carbon dioxide

A novel, highly enantioselective (E ? 100) and environmentally benign method is presented for the kinetic resolution of trans-2-hydroxycyclohexanecarbonitrile in supercritical carbon dioxide. Using Candida antarctica Lipase B as a biocatalyst and vinyl acetate as an acyl donor, enantiomerically pure (1S,2R)-acetoxycyclohexanecarbonitrile and (1R,2S)-hydroxycyclohexanecarbonitrile were obtained in quantitative yields and excellent ee (98%) values.