Nonlinear optical property calculations of polyynes with long-range corrected hybrid exchange-correlation functionals

Polarizabilities (alpha), second-hyperpolarizabilities (gamma), and the gamma scaling factors (c) of polyynes [H-(C[triple bond]C)(n)-H, n = 1-8] were evaluated using the long-range corrected (LC) density functional theory (DFT) and LC-DFT with a short-range Gaussian attenuation (LCgau), as well as high quality wavefunction methods. We show that the c values obtained from LC- and LCgau-DFT are consistent with those from CCSD(T) calculations. Furthermore, the polyyne c values we obtained are seen to be smaller than the c values derived from previously calculated polyene gamma values [Sekino et al., J. Chem. Phys. 126, 014107 (2007)] in all the methods we consider. We compare our results with those obtained experimentally [Shepkov et al., J. Chem. Phys. 120, 6807 (2004).] from end-capped polyynes [i-Pr(3)Si-(C[triple bond]C)(n)-Sii-Pr(3)], which show larger c values for polyynes than polyenes. Our alpha and gamma calculations with i-Pr(3)Si-(C[triple bond]C)(n)-Sii-Pr(3) (n = 4, 5, 6, and 8) show that i-Pr(3)Si- may participate in pi molecular orbital delocalization, which can unexpectedly affect the c value. We also confirm the importance of molecular geometry in these nonlinear optical calculations. We find that while LC- and LCgau-DFT excellently reproduce experimental geometries and bond length alternation (BLA), MP2 optimized geometries have a BLA that is too short to be used for accurate alpha and gamma calculations.     

Long-range corrected hybrid density functionals with damped atom-atom dispersion corrections

We report re-optimization of a recently proposed long-range corrected (LC) hybrid density functional [J.-D. Chai and M. Head-Gordon, J. Chem. Phys., 2008, 128, 084106] to include empirical atom-atom dispersion corrections. The resulting functional, omegaB97X-D yields satisfactory accuracy for thermochemistry, kinetics, and non-covalent interactions. Tests show that for non-covalent systems, omegaB97X-D shows slight improvement over other empirical dispersion-corrected density functionals, while for covalent systems and kinetics it performs noticeably better. Relative to our previous functionals, such as omegaB97X, the new functional is significantly superior for non-bonded interactions, and very similar in performance for bonded interactions.     

First hyperpolarizability of polymethineimine with long-range corrected functionals

Using the long-range corrected (LC) density functional theory (DFT) scheme introduced by Iikura et al. [J. Chem. Phys. 115, 3540 (2001)] and the Coulomb-attenuating model (CAM-B3LYP) of Yanai et al. [Chem. Phys. Lett. 393, 51 (2004)], we have calculated the longitudinal dipole moments and static electronic first hyperpolarizabilities of increasingly long polymehtineimine oligomers. For comparison purposes Hartree-Fock (HF), Moller-Plesset perturbation theory (MP2), and conventional pure and hybrid functionals have been considered as well. HF, generalized gradient approximation (GGA), and conventional hybrids provide too large dipole moments for long oligomers, while LC-DFT allows to reduce the discrepancy with respect to MP2 by a factor of 3. For the first hyperpolarizability, the incorrect evolution with the chain length predicted by HF is strongly worsened by BLYP, Perdew-Burke-Ernzerhof (PBE), and also by B3LYP and PBE0. On the reverse, LC-BLYP and LC-PBE hyperpolarizabilities are correctly predicted to be positive (but for the two smallest chains). Indeed, for medium and long oligomers LC hyperpolarizabilities are slightly smaller than MP2 hyperpolarizabilities, as it should be. CAM-B3LYP also strongly improves the B3LYP results, though a bit less impressively for small chain lengths. The present study demonstrates the efficiency of long-range DFT, even in very pathological cases.     

Exchange coupling constants using Density Functional Theory: long-range corrected functionals

The presence of the self-interaction error in common exchange correlation functionals is one of the main drawbacks of calculations using methods based on Density Functional Theory. The recently developed asymptotically corrected functionals are an alternative way to solve the erroneous asymptotic behavior that may be at the origin of this error. Some of these functionals have been tested in the calculation of the exchange coupling constants of a number of transition metal dinuclear complexes. Correction of the self-interaction error is especially important for calculations of this kind. This error leads to the inclusion of some static correlation terms that overestimate the J values. This study shows that some of the long-range corrected functionals tested give promising results.     

Assessment of the efficiency of long-range corrected functionals for some properties of large compounds

Using the long-range correction (LC) density functional theory (DFT) scheme introduced by Iikura et al. [J. Chem. Phys. 115, 3540 (2001)] and the Coulomb-attenuating model (CAM-B3LYP) of Yanai et al. [Chem. Phys. Lett. 393, 51 (2004)], we have calculated a series of properties that are known to be poorly reproduced by standard functionals: Bond length alternation of pi-conjugated polymers, polarizabilities of delocalized chains, and electronic spectra of extended dyes. For each of these properties, we present cases in which traditional hybrid functionals do provide accurate results and cases in which they fail to reproduce the correct trends. The quality of the results is assessed with regard to experimental values and/or data arising from electron-correlated wave function approaches. It turns out that (i) both LC-DFT and CAM-B3LYP provide an accurate bond length alternation for polyacetylene and polymethineimine, although for the latter they decrease slightly too rapidly with chain length. (ii) The LC generalized gradient approximation and MP2 polarizabilities of long polyphosphazene and polymethineimine oligomers agree almost perfectly. In the same way, CAM-B3LYP corrects the major part of the B3LYP faults. (iii) LC and CAM techniques do not help in correcting the nonrealistic evolution with chain length of the absorption wavelengths of cyanine derivatives. In addition, though both schemes significantly overestimate the ground to excited state transition energy of substituted anthraquinone dyes, they provide a more consistent picture once a statistical treatment is performed than do traditional hybrid functionals.     

Analytic derivatives for perturbatively corrected "double hybrid" density functionals: theory, implementation, and applications

A recently proposed new family of density functionals [S. Grimme, J. Chem. Phys. 124, 34108 (2006)] adds a fraction of nonlocal correlation as a new ingredient to density functional theory (DFT). This fractional correlation energy is calculated at the level of second-order many-body perturbation theory (PT2) and replaces some of the semilocal DFT correlation of standard hybrid DFT methods. The new "double hybrid" functionals (termed, e.g., B2-PLYP) contain only two empirical parameters that have been adjusted in thermochemical calculations on parts of the G2/3 benchmark set. The methods have provided the lowest errors ever obtained by any DFT method for the full G3 set of molecules. In this work, the applicability of the new functionals is extended to the exploration of potential energy surfaces with analytic gradients. The theory of the analytic gradient largely follows the standard theory of PT2 gradients with some additional subtleties due to the presence of the exchange-correlation terms in the self-consistent field operator. An implementation is reported for closed-shell as well as spin-unrestricted reference determinants. Furthermore, the implementation includes external point charge fields and also accommodates continuum solvation models at the level of the conductor like screening model. The density fitting resolution of the identity (RI) approximation can be applied to the evaluation of the PT2 part with large gains in computational efficiency. For systems with approximately 500-600 basis functions the evaluation of the double hybrid gradient is approximately four times more expensive than the calculation of the standard hybrid DFT gradient. Extensive test calculations are provided for main group elements and transition metal containing species. The results reveal that the B2-PLYP functional provides excellent molecular geometries that are superior compared to those from standard DFT and MP2.     

Assessment of long-range corrected functionals performance for n-->pi* transitions in organic dyes

The first n-->pi* transitions of 18 nitroso and 16 thiocarbonyl dyes have been computed by time-dependent density functional theory (TD-DFT) using pure as well as global and range-separated hybrid functionals. It turns out that the accuracy of all hybrids is relatively similar, i.e., the inclusion of a growing fraction of exact exchange does neither worsen nor improve significantly the raw TD-DFT estimations. However, after a simple linear regression, it appears that the range-separated hybrids provide a better accuracy than global hybrids.     

Local hybrid functionals based on density matrix products

We present a novel similarity metric comparing exact and semilocal density functional theory (DFT) exchange holes in real space. This metric is obtained from the product of the one-particle density matrix and the uniform electron gas model density matrix. The metric is bound between 0 and 1, 1 in the uniform electron gas, 0 in regions asymptotically far from finite systems, and can detect delocalization of the exact exchange hole and effective fractional occupations. We also present a parameter-free local hybrid functional that uses this similarity metric to locally mix exact and semilocal DFT exchange energy densities. The resulting functional gives better thermochemistry and reaction barrier heights than our original local hybrids [Jaramillo et al., J. Chem. Phys. 118, 1068 (2003)], while retaining moderate accuracy for symmetric radical cation dimers.     

Ab initio molecular dynamics using hybrid density functionals

Ab initio molecular dynamics simulations with hybrid density functionals have so far found little application due to their computational cost. In this work, an implementation of the Hartree-Fock exchange is presented that is specifically targeted at ab initio molecular dynamics simulations of medium sized systems. We demonstrate that our implementation, which is available as part of the CP2K/Quickstep program, is robust and efficient. Several prescreening techniques lead to a linear scaling cost for integral evaluation and storage. Integral compression techniques allow for in-core calculations on systems containing several thousand basis functions. The massively parallel implementation respects integral symmetry and scales up to hundreds of CPUs using a dynamic load balancing scheme. A time-reversible multiple time step scheme, exploiting the difference in computational efficiency between hybrid and local functionals, brings further time savings. With extensive simulations of liquid water, we demonstrate the ability to perform, for several tens of picoseconds, ab initio molecular dynamics based on hybrid functionals of systems in the condensed phase containing a few thousand Gaussian basis functions.     

Water cluster anions studied by the long-range corrected density functional theory

Long-range corrected density functional theory (LC-DFT) is applied to a series of small water cluster anions(n= 2-6) to compute their vertical detachment energies (VDEs). The LC scheme is shown to eliminate an unphysical overestimation of the electron-water attraction in the hybrid functional by properly accounting for the long-range exchange repulsions. It is shown that a correct correlation energy behavior for a rapidly varying density is also important for describing a spatially extent, excess electron. The one-parameter progressive (OP) correlation functional, which satisfies this condition, leads to a remarkable improvement in the calculated VDE over the conventional one. The LC-BOP method produces highly accurate VDEs with a mean absolute deviation of 13.8 meV from the reference CCSD(T) results, reducing the error of B3LYP by more than 15 times. LC-BOP is found to be more accurate than MP2 which yields an excess electron underbound by 43.6 meV. The effect of basis sets on the calculated VDE is also examined. The aug-cc-pVDZ basis set with an extra diffuse function is found to be more accurate and reliable than the extended Pople-type basis sets used in the previous works. The extrapolation of the calculated VDE of different electron binding motifs is compared with the VDEs of experimentally observed three isomers (Verlet, J. R. R.; Bragg,A. E.; Kammrath, A.; Cheshnovsky, O.; Neumark, D. M. Science 2005, 307, 93).     

Predictive power of long-range corrected functionals on the spectroscopic properties of tetrapyrrole derivatives for photodynamic therapy

Porphyrin and chlorin based compounds possess promising properties to be utilized as photosensitizers in photodynamic therapy (PDT). However, the photosensitizers available on the market today are not ideal for use in PDT, which has emphasized the need for new photosensitizers with improved photodynamic properties to be developed. Computational drug-design can be utilized in the search for improved pharmaceutical compounds, provided that the methods used are able to reproduce experimental data. In the present study we investigated, by the use of time-dependent density functional theory (TD-DFT), the performance of the long-range corrected functionals ωB97, ωB97X and ωB97XD on their ability to predict low-lying singlet excitations (>600 nm) of a set of well-known photosensitizing compounds. It was found that ωB97X reproduced the experimental red-most absorption band most satisfactorily. The use of either B3LYP, ωB97XD or M06 in geometry optimizations has a minor effect on the spectra in most cases. Calculated energy differences between the optimized singlet ground states and optimized first excited triplet states show consistent and overall higher triplet state energies for B3LYP, M06, and PBE0 compared with ωB97, ωB97X, and ωB97XD. The calculated triplet state energies are, however, sufficient to generate singlet oxygen in most cases.     

Double-hybrid density functionals with long-range dispersion corrections: higher accuracy and extended applicability

The objective of this work is the further systematic improvement of the accuracy of Double-Hybrid Density Functionals (DHDF) that add non-local electron correlation effects to a standard hybrid functional by second-order perturbation theory (S. Grimme, J. Chem. Phys., 2006, 124, 034108). The only known shortcoming of these generally highly accurate functionals is an underestimation of the long-range dispersion (van der Waals) interactions. To correct this deficiency, we add a previously developed empirical dispersion term (DFT-D) to the energy expression but leave the electronic part of the functional untouched. Results are presented for the S22 set of non-covalent interaction energies, the G3/99 set of heat of formations and conformational energies of a phenylalanyl-glycyl-glycine peptide model. We furthermore propose seven hydrocarbon reactions with strong intramolecular dispersion contributions as a benchmark set for newly developed density functionals. In general, the proposed composite approach is for many chemically relevant properties of similar quality as high-level coupled-cluster treatments. A significant increase of the accuracy for non-covalent interactions is obtained and the corrected B2PLYP DHDF provides one of the lowest ever obtained Mean Absolute Deviations (MAD) for the S22 set (0.2-0.3 kcal mol(-1)). Unprecedented high accuracy is also obtained for the relative energies of peptide conformations that turn out to be very difficult. The significant improvements found for the G3/99 set (reduction of the MAD from 2.4 to 1.7 kcal mol(-1)) underline the importance of intramolecular dispersion effects in large molecules. In all tested cases the results from the standard B3LYP approach are also significantly improved, and we recommend the general use of dispersion corrections in DFT treatments.     

The importance of middle-range Hartree-Fock-type exchange for hybrid density functionals

Hybrid functionals are responsible for much of the utility of modern Kohn-Sham density functional theory. When rigorously applied to solid-state metallic and small band gap systems, however, the slow decay of their nonlocal Hartree-Fock-type exchange makes hybrids computationally challenging and introduces unphysical effects. This can be remedied by using a range-separated hybrid which only keeps short-range nonlocal exchange, as in the functional of Heyd et al. [J. Chem. Phys. 118, 8207 (2003)]. On the other hand, many molecular properties require full long-range nonlocal exchange, which can also be included by means of a range-separated hybrid such as the recently introduced LC-omegaPBE functional [O. A. Vydrov and G. E. Scuseria, J. Chem. Phys. 125, 234109 (2006)]. In this paper, we show that a three-range hybrid which mainly includes middle-range Hartree-Fock-type exchange and neglects long- and short-range Hartree-Fock-type exchange yields excellent accuracy for thermochemistry, barrier heights, and band gaps, emphasizing that the middle-range part of the 1/r potential seems crucial to accurately model these properties.     

Molecular dynamics simulation of liquid water: hybrid density functionals

The structure, dynamical, and electronic properties of liquid water utilizing different hybrid density functionals were tested within the plane wave framework of first-principles molecular dynamics simulations. The computational approach, which employs modified functionals with short-ranged Hartree-Fock exchange, was first tested in calculations of the structural and bonding properties of the water dimer and cyclic water trimer. Liquid water simulations were performed at the state point of 350 K at the experimental density. Simulations included three different hybrid functionals, a meta-functional, four gradient-corrected functionals, and the local density and Hartree-Fock approximations. It is found that hybrid functionals are superior in reproducing the experimental structure and dynamical properties as measured by the radial distribution function and self-diffusion constant when compared to the pure density functionals. The local density and Hartree-Fock approximations show strongly over- and understructured liquids, respectively. Hydrogen bond analysis shows that the hybrid functionals give slightly smaller average numbers of hydrogen bonds than pure density functionals but similar hydrogen bond populations. The average molecular dipole moments in the liquid from the three hybrid functionals are lower than those of the corresponding pure density functionals.     

Many-electron self-interaction and spin polarization errors in local hybrid density functionals

Errors for systems with noninteger occupation have been connected to common failures of density functionals. Previously, global hybrids and pure density functionals have been investigated for systems with noninteger charge and noninteger spin state. Local hybrids have not been investigated for either of those systems to the best of our knowledge. This study intends to close this gap. We investigate systems with noninteger charge to assess the many-electron self-interaction error and systems with noninteger spin state to assess the spin polarization error of recently proposed local hybrids and their range-separated variants. We find that long-range correction is very important to correct for many-electron self-interaction error in cations, whereas most full-range local hybrids seem to be sufficient for anions, where long-range-corrected density functionals tend to overcorrect. On the other hand, while all hitherto proposed long-range-corrected density functionals show large spin polarization errors, the Perdew-Staroverov-Tao-Scuseria (PSTS) functional performs best of all local hybrids in this case and shows an outstanding behavior for the dependence of the energy on the spin polarization.