A medium-controlled fluorescence dual-responsive probe for Cu2+ and Hg2+ in aqueous solutions

In this study, we report a histidine-based fluorescence probe for Cu(2+) and Hg(2+), in which the amino group and imino group were modified by two common protective groups, 9-fluorenylmethoxycarbonyl and trityl group, respectively. In a water/methanol mixed solution, the probe displayed a selective fluorescence "turn-off" response to Cu(2+) when the ratio of CH(3)OH/H(2)O was higher than 1:1. Specifically, when the solvent is changed to 1:1 methanol/water, the 304 nm fluorescence peak is enhanced, while the 317 nm peak is weakened, upon addition of either Cu(2+) or Hg(2+) ions. The mechanism for such distinct responses of the probe to Cu(2+) and Hg(2+) was further clarified by using NMR and molecular simulation. The experiment results indicated that the polarity of solvent could influence the coordination mode of 1 with Cu(2+) and Hg(2+), and control the fluorescence response as a "turn-off" or ratiometric probe.     

Thiol-functionalized hierarchical zeolite nanocomposite for adsorption of Hg2+ from aqueous solutions

A thiol-functionalized hierarchical zeolite nanocomposite was synthesized and investigated with a view to remove mercury from aqueous solutions. The hierarchical zeolite was prepared by the use of a beta zeolite and of cetyltrimethylammoniumbromide (CTAB). The ligand, 3-mercaptopropyltrimethoxysilane containing thiol (–SH) groups, was then immobilized on the surface of the hierarchical zeolite through grafting with surface silanol groups. FTIR, XRD, SEM, TG-DTG, and N₂ adsorption–desorption techniques were used to characterize the nanocomposite before and after functionalization. Adsorption experiments showed that this adsorbent was an excellent one to bind mercury with high selectivity; an adsorption capacity of 8.2 mequiv·g⁻¹ of adsorbent was obtained. Furthermore, the adsorbent retained most of its capacity after regeneration with nitric acid and thiourea solutions. The adsorption data was fitted to the Freundlich isotherm.     

Formation of mercury clusters during pulsed radiolysis of aqueous Hg 2 2+ solutions

Pulsed radiolysis, EPR, and optical spectroscopy were used to investigate the radiation-induced reduction of Hg ₂ ²⁺ ions in aqueous solutions. It was shown that the Hg ₂ ⁺ ions that form as a result of the reduction reaction react rapidly with Hg ₂ ²⁺ with formation of Hg ₄ ³⁺ . Constants of formation and disappearance of these ions were determined. The process of disappearance of this species results in the formation of more complex clusters containing six or more mercury atoms. Further complication of the clusters affords colloidal metal particles.Institute of Physical Chemistry, Russian Academy of Sciences, Moscow 117915. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 9–12, January, 1992.     

Detection of Hg2+ in aqueous solutions with a foldamer-based fluorescent sensor modulated by surfactant micelles

[structure: see text] A hybrid foldamer constructed from six cholate units and two methionines was labeled with a DANSYL (DNS) group. The foldamer was solubilized by surfactant micelles to allow its usage as a fluorescent sensor for mercury ions present in the micromolar range in aqueous solutions. Its sensitivity was largely independent of the concentration of nonionic surfactants but was strongly influenced by both the nature and the concentration of ionic surfactants.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

Amin-functionalized magnetic-silica core-shell nanoparticles for removal of Hg2+ from aqueous solution

Magnetic nanoparticles with monodisperse shape and size were prepared by a simple method and covered by silica. The prepared core-shell Fe₃O₄@silica nanoparticles were functionalized by amino groups and characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer-Emmett-Teller (BET) and Fourier transform infrared spectroscopy (FT-IR) techniques. The synthesized nanoparticles were employed as an adsorbent for removal of Hg²⁺ from aqueous solutions, and the adsorption phenomena were studied from both equilibrium and kinetic point of views. The adsorption equilibriums were analyzed using different isotherm models and correlation coefficients were determined for each isotherm. The experimental data were fitted to the Langmuir–Freundlich isotherm better than other isotherms. The adsorption kinetics was tested for the pseudo-first-order, pseudo-second-order and Elovich kinetic models at different initial concentrations of the adsorbate. The pseudo-second-order kinetic model describes the kinetics of the adsorption process for amino functionalized adsorbents. The maximum adsorption occurred at pH 5.7 and the adsorption capacity for Fe₃O₄@silica-NH₂ toward Hg²⁺ was as high as 126.7 mg/g which was near four times more than unmodified silica adsorbent.     

Polyphenylsulfone/multiwalled carbon nanotubes mixed ultrafiltration membranes: Fabrication,characterization and removal of heavy metals Pb2+, Hg2+, and Cd2+ from aqueous solutions

Polyphenylsulfone/multiwalled carbon nanotubes/polyvinylpyrrolidone/1-methyl-2-pyrrolidone mixed matrix ultrafiltration flat-sheet membranes were fabricated via phase inversion process to inspect the heavy metals separation efficacy from aqueous media. Fabricated membranes cross-sectional morphological changes and the topographical alterations were assessed with Scanning electron microscopy (SEM) and atomic force microscopy (AFM). Particularly, MWCNTs assisted membranes exhibited better permeability ability as well as heavy metal removal enactment than virgin membrane. The dead-end filter unit was engaged in current research to examine the permeability and heavy metal removal competence of membranes. With the continuous enhancement of MWCNTs wt% in a polymer matrix, significant enhancement was observed with pure water flux study, from 41.69 L/m² h to >185 L/m² h as well as with the heavy metals separation study. Added additive MWCNTs can impact the pore sizes in membranes. The heavy metal separation results achieved, the membrane with 0.3 wt% of MWCNTs (PCNT-3) exhibited >98%, >76% and >72% for Pb²⁺, Hg²⁺ and Cd²⁺ ions, respectively. Overall, MWCNTs introduced PPSU membranes exposed best outcomes with heavy metals contained wastewater treatment.     

Synthesis and characterization of electroactive ferrocene derivatives: ferrocenylimidazoquinazoline as a multichannel chemosensor selectively for Hg2+ and Pb2+ ions in an aqueous environment

The synthesis and characterization of ferrocene (Fc) derivatives 4-[2,5-diferrocenyl-4-(4-pyridyl)imidazolidin-1-ylmethyl]pyridine (1), ferrocenylmethylenepyridin-3-ylmethylamine (2), N,N'-bis(ferrocenylmethylene)-2,4,6-trimethylbenzene-1,3-diamine (3), and 6-ferrocenyl-5,6-dihydro[4,5]imidazo[1,2-c]quinazoline (4) have been described. Structures of 1, 2, and 4 have been determined by single-crystal X-ray diffraction analyses. At 25 °C, 1-3 are nonfluorescent, while 4 displays moderate fluorescence and chromogenic, fluorogenic, and electrochemical sensing selectively toward Hg(2+) and Pb(2+) ions. Association constants (K(a)) for Hg(2+) and Pb(2+) have been determined by the Benesi-Hildebrand method. Job's plot analysis supported 1:1 and 1:2 stoichiometries for Hg(2+) and Pb(2+) ions. Cyclic voltammograms of 1-4 exhibited reversible waves corresponding to a ferrocene/ferrocenium couple. The wave associated with 4 (+0.0263 V) exhibited positive (ΔE(pa) = 0.136 V) and negative (ΔE(pa) = 0.025 V) shifts in the presence of Hg(2+) and Pb(2+) ions, respectively. The mode of interaction between metal ions and 4 has been supported by (1)H NMR spectroscopy and mass spectrometry studies and verified by theoretical studies. It presents the first report dealing with ferrocene-substituted quinazoline as a multichannel chemosensor for Hg(2+)/Pb(2+) ions.     

Comparative structural stability of natural clays and zeolites in contact with60Co2+ aqueous solutions

The ability of synthetic and natural Mexican zeolites and clays to remove radioactive Co from aqueous solutions is discussed. In the various samples, crystallinity was determined by X-ray diffraction. The amount of radionuclide sorbed by the aluminosilicates was determined by -spectrometry.     

Dual-mode unsymmetrical squaraine-based sensor for selective detection of Hg2+ in aqueous media

A novel chemosensor based on unsymmetrical squaraine dye (USQ-1) for the selective detection of Hg(2+) in aqueous media is described. USQ-1 in combination with metal ions shows dual chromogenic and "turn-on" fluorogenic response selectivity toward Hg(2+) as compared to Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ba(2+), Al(3+), Cu(2+), Cd(2+), Mn(2+), Fe(3+), Ag(+), Pb(2+), Zn(2+), Ni(2+) and Co(2+) due to the Hg(2+)-induced deaggregation of the dye molecule. A recognition mechanism based on the binding mode is proposed based on the absorption and fluorescence changes, (1)H NMR titration experiments, ESI-MS study, and theoretical calculations.     

A rhodamine-based Hg2+-selective fluorescent probe in aqueous solution

A new rhodamine-based Hg²⁺-selective fluorescent probe (I) was designed and synthesized. Compound I displays excellent selective and sensitive response to Hg²⁺ over other transition metal ions in neutral aqueous solutions. I itself is a colorless, nonfluorescent compound. Upon addition of Hg²⁺ to its solution, the thiosemicarbazide moiety of I undergoes an irreversible desulfurization reaction to form the corresponding 1,3,4-oxadiazole (II), a colorful and fluorescent product, causing instantaneous development of visible color and strong fluorescence emission. Based on this mechanism, a fluorogenic probe for Hg²⁺ was developed. The fluorescence increases linearly with the Hg²⁺ concentration up to 0.8 μmol L⁻¹ with the detection limit of 9.4 nmol L⁻ (3σ).     

"Turn-on" fluorescent sensor for Hg2+ via displacement approach

A new Cu2+ compound Cu- NB, (where H2 NB is bis(2-hydroxyl-naphthalene-carboxaldehyde) benzil dihydrazone) was synthesized as a highly selective fluorescence chemosensor for the detection of Hg2+ in aqueous media through a displacement "turn-on" signaling strategy. Whereas the coordination of Cu2+ resulted in a considerable quenching of the typical luminescence of the naphthol rings in Cu-NB, the addition of Hg2+ ion led to a dramatic increase in the emission intensity of Cu-NB at about 530 nm (excitation at 430 nm). The competitive fluorescent experiments showed that alkali, alkaline earth metal ions, the group 12 metals Zn2+, Cd2+, the first-row transition-metal ions such as Mn2+, Fe2+, Co2+, and Ni2+, as well as Pb2+ could not inhibit the Hg2+-binding fluorescent enhancement. It is postulated that the existence of Cu2+ in the luminescent probe Cu-NB could turn away the interferences of other metal cations from Hg2+ detection. The optical responses of the free ligand upon addition of Cu2+ ion, and of the Hg-H2NB compound upon the addition of Cu2+ were also investigated for comparisons.     

A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

A highly selective colorimetric sensor for Hg2+ based on a copper (II) complex of thiosemicarbazone in aqueous solutions

By applying an indirect strategy, a new copper (Ⅱ) complex of a thiosemicarbazone L has been successfully developed as a colorimetric chemosensor for the sensitive detection of mercury (Ⅱ) ions. In the presence of copper (Ⅱ) ions, the colorless solution of L became yellow; however, upon the addition of traces of mercury (Ⅱ) ions, the yellow color faded to colorless immediately. Other ions, including Fe3+ , Ag+ , Ca2+ , Zn2+ , Pb2+ , Cd2+ , Ni2+ , Co2+ , Cr3+ and Mg2+ had a negligible influence on the probe behavior. The detection limits were 5.0×10 -6 M and 3.0×10 -7 M of Hg2+ using the visual color changes and UV-vis changes respectively. Test strips based on Cu-L were fabricated, which could act as a convenient and efficient Hg2+ test kits.     

A highly selective chemodosimeter for the rapid detection of Hg2+ ions in aqueous media

A novel S,S′-diallyl carbohydrazonodithioate derivative 3 of rhodamine B hydrazone was developed as a chemodosimeter for selective detection of mercury ions based on Hg²⁺ promoted cyclization. The allyl groups of 3 play a key role in the binding and selection of Hg²⁺ ions. The probe responds selectively to Hg²⁺ over various other competitive cations with marked chromo- and fluorogenic changes. The formation of stable oxadiazole derivative 8 was a strong driving force for this high selectivity. Practically, this probe is more promising because of the remarkable high selectivity, faster response, low detection limit, and aqueous solubility of 3.     

Rhodamine B thiolactone: a simple chemosensor for Hg2+ in aqueous media

Rhodamine B thiolactone is developed as a simple chemosensor towards Hg(2+) in neutral aqueous solution with high selectivity.     

Chromenone-rhodamine conjugate for naked eye detection of Al3+ and Hg2+ ions in semi aqueous medium

Chromenone-rhodamine conjugate 1 has been synthesized and its metal ion binding properties have been studied in CH₃CN/water (3:1, v/v; 10 mM HEPES buffer; pH = 6.85). Compound 1 senses multiple metal ions such as Al³⁺ and Hg²⁺ by exhibiting turn on fluorescence and color change (colorless to pink). Al³⁺ and Hg²⁺ ions have been distinguished with the aid of tetrabutylammonium iodide (TBAI). While in the presence of I^? the pink color of the 1.Hg²⁺ complex was completely discharged; under identical conditions the pink color of 1.Al³⁺ complex was retained.     

Interaction of positronium with Co2+ and Cu2+ ions in aqueous solutions

Interactions of positronium in aqueous solutions of Co²⁺ and Cu²⁺ ions have been investigated at room temperature (297 K) at varying concentrations using both lifetime and Doppler broadening of annihilation radiation techniques. In the case of Co²⁺, the results indicate spin conversion reaction alone. However, in the case of Cu²⁺, oxidation is predominant with a small contribution of spin conversion reaction. The corresponding rate constants have been evaluated.