The strong-field tripodal phosphine donor, [PhB(CH2PiPr2)3]-, provides access to electronically and coordinatively unsaturated transition metal complexes

This paper introduces a sterically encumbered, strong-field tris(diisopropylphosphino)borate ligand, [PhBP(iPr)(3)] ([PhBP(iPr)(3)] = [PhB(CH(2)P(i)Pr(2))(3)](-)), to probe aspects of its conformational and electronic characteristics within a host of complexes. To this end, the Tl(I) complex, [PhBP(iPr)(3)]Tl (1), was synthesized and characterized in the solid-state by X-ray diffraction analysis. This precursor proves to be an effective transmetallating agent, as evidenced by its reaction with the divalent halides FeCl(2) and CoX(2) (X = Cl, I) to produce the monomeric, 4-coordinate, high-spin derivatives [PhBP(iPr)(3)]FeCl (2) and [PhBP(iPr)(3)]CoX (X = Cl (3), I (4)) in good yield. Complexes 2-4 were each characterized by X-ray diffraction analysis and shown to be monomeric in the solid-state. For conformational and electronic comparison within a system exhibiting higher than 4-coordination, the 16-electron ruthenium complexes [[PhBP(iPr)(3)]Ru(mu-Cl)](2) (5) and [[PhBP(3)]Ru(mu-Cl)](2) (6) were prepared and characterized ([PhBP(3)] = [PhB(CH(2)PPh(2))(3)](-)). The chloride complexes 2 and 3 reacted with excess CO to afford the divalent, monocarbonyl adducts [PhBP(iPr)(3)]FeCl(CO) (7) and [PhBP(iPr)(3)]CoCl(CO) (8), respectively. Reaction of 4 with excess CO resulted in the monovalent, dicarbonyl product [PhBP(iPr)(3)]Co(I)(CO)(2) (9). Complexes 5 and 6 also bound CO readily, providing the octahedral, 18-electron complexes [PhBP(iPr)(3)]RuCl(CO)(2) (10) and [PhBP(3)]RuCl(CO)(2) (11), respectively. Dimers 5 and 6 were broken up by reaction with trimethylphosphine to produce the mono-PMe(3) adducts [PhBP(iPr)(3)]RuCl(PMe(3)) (12) and [PhBP(3)]RuCl(PMe(3)) (13). Stoichiometric oxidation of 3 with dioxygen provided the 4-electron oxidation product [PhB(CH(2)P(O)(i)Pr(2))(2)(CH(2)P(i)Pr(2))]CoCl (14), while exposure of 3 to excess oxygen results in the 6-electron oxidation product [PhB(CH(2)P(O)(i)Pr(2))(3)]CoCl (15). Complexes 2 and 4 were characterized via cyclic voltammetry to compare their redox behavior to their [PhBP(3)] analogues. Complex 4 was also studied by SQUID magnetization and EPR spectroscopy to confirm its high-spin assignment, providing an interesting contrast to its previously described low-spin relative, [PhBP(3)]CoI. The difference in spin states observed for these two systems reflects the conformational rigidity of the [PhBP(iPr)(3)] ligand by comparison to [PhBP(3)], leaving the former less able to accommodate a JT-distorted electronic ground state.     

Spin-state tuning at pseudotetrahedral d(7) ions: examining the structural and magnetic phenomena of four-coordinate [BP3]CoII-X systems

Electronic structure, spin-state, and geometrical relationships for a series of pseudotetrahedral Co(II) aryloxide, siloxide, arylthiolate, and silylthiolate complexes supported by the tris(phosphino)borate [BP(3)] ligands [PhBP(3)] and [PhBP(i)()(Pr)(3)] ([PhB(CH(2)PPh(2))(3)](-) and [PhB(CH(2)P(i)()Pr(2))(3)](-), respectively) are described. Standard (1)H NMR, optical, electrochemical, and solution magnetic data, in addition to low-temperature EPR and variable temperature SQUID magnetization data, are presented for the new cobalt(II) complexes [PhBP(3)]CoOSiPh(3) (2), [PhBP(3)]CoO(4-(t)()Bu-Ph) (3), [PhBP(3)]CoO(C(6)F(5)) (4), [PhBP(3)]CoSPh (5), [PhBP(3)]CoS(2,6-Me(2)-Ph) (6), [PhBP(3)]CoS(2,4,6-(i)()Pr(3)-Ph) (7), [PhBP(3)]CoS(2,4,6-(t)()Bu(3)-Ph) (8), [PhBP(3)]CoSSiPh(3) (9), [PhBP(3)]CoOSi(4-NMe(2)-Ph)(3) (10), [PhBP(3)]CoOSi(4-CF(3)-Ph)(3) (11), [PhBP(3)]CoOCPh(3) (12), [PhBP(i)()(Pr)(3)]CoOSiPh(3) (14), and [PhBP(i)()(Pr)(3)]CoSSiPh(3) (15). The low-temperature solid-state crystal structures of 2, 3, 5-10, 12, and 15 are also described. These pseudotetrahedral cobalt(II) complexes are classified as featuring one of two limiting distortions, either umbrella or off-axis. Magnetic and spectroscopic data demonstrate that both S = (1)/(2) and S = (3)/(2) ground-state electronic configurations are accessible for the umbrella distorted structure type, depending on the nature of the X-type ligand, its denticity (eta(1) versus eta(3)), and the tripodal phosphine ligand employed. Off-axis distorted complexes populate an S = (1)/(2) ground-state exclusively. For those four-coordinate complexes that populate S = (1)/(2) ground states, X-ray data show two Co-P bond distances that are invariably shorter than a third Co-P bond. The pseudotetrahedral siloxides 2, 10, and 11 are exceptional in that they display gradual spin crossover in the solid state. The diamagnetic cobalt(III) complex {[PhBP(3)]CoOSiPh(3)}{BAr(4)} ({16}{BAr(4)}) (Ar = Ph or 3,5-(CF(3))(2)-C(6)H(3)) has also been prepared and structurally characterized. Accompanying electronic structure calculations (DFT) for complexes 2, 6, and {16}(+) support the notion of a close electronic structure relationship between these four-coordinate systems and octahedral, sandwich, and half-sandwich coordination complexes.     

Considering Fe(II/IV) redox processes as mechanistically relevant to the catalytic hydrogenation of olefins by [PhBP iPr 3]Fe-H x species

Several coordinatively unsaturated pseudotetrahedral iron(II) precursors, [PhBP(iPr)(3)]Fe-R ([PhBP(iPr)(3)] = [PhB(CH(2)P(i)Pr(2))(3)](-); R = Me (2), R = CH(2)Ph (3), R = CH(2)CMe(3) (4)) have been prepared from [PhBP(iPr)(3)]FeCl (1) that serve as precatalysts for the room-temperature hydrogenation of unsaturated hydrocarbons (e.g., ethylene, styrene, 2-pentyne) under atmospheric H(2) pressure. The solid-state crystal structures of 2 and 3 are presented. To gain mechanistic insight into the nature of these hydrogenation reactions, a number of [PhBP(iPr)(3)]-supported iron hydrides were prepared and studied. Room-temperature hydrogenation of alkyls 2-4 in the presence of a trapping phosphine ligand affords the iron(IV) trihydride species [PhBP(iPr)(3)]Fe(H)(3)(PR(3)) (PR(3) = PMe(3) (5); PR(3) = PEt(3) (6); PR(3) = PMePh(2) (7)). These spectroscopically well-defined trihydrides undergo hydrogen loss to varying degrees in solution, and for the case of 7, this process leads to the structurally identified Fe(II) hydride product [PhBP(iPr)(3)]Fe(H)(PMePh(2)) (9). Attempts to prepare 9 by addition of LiEt(3)BH to 1 instead lead to the Fe(I) reduction product [PhBP(iPr)(3)]Fe(PMePh(2)) (10). The independent preparations of the Fe(II) monohydride complex [PhBP(iPr)(3)]Fe(II)(H)(PMe(3)) (11) and the Fe(I) phosphine adduct [PhBP(iPr)(3)]Fe(PMe(3)) (8) are described. The solid-state crystal structures of trihydride 5, monohydride 11, and 8 are compared and demonstrate relatively little structural reorganization with respect to the P(3)Fe-P' core motif as a function of the iron center's formal oxidation state. Although paramagnetic 11 (S = 1) is quantitatively converted to the diamagnetic trihydride 5 under H(2), the Fe(I) complex 8 (S = (3)/(2)) is inert toward atmospheric H(2). Complex 10 is likewise inert toward H(2). Trihydrides 5 and 6 also serve as hydrogenation precatalysts, albeit at slower rates than that for the benzyl complex 3 because of a rate-contributing phosphine dependence. That these hydrogenations appear to proceed via well-defined olefin insertion steps into an Fe-H linkage is indicated by the reaction between trihydride 5 and ethylene, which cleanly produces the ethyl complex [PhBP(iPr)(3)]Fe(CH(2)CH(3)) (13) and an equivalent of ethane. Mechanistic issues concerning the overall reaction are described.     

Bis(imino)pyridine ligand deprotonation promoted by a transient iron amide

Addition of 2 equiv of LiNMe(2) to the bis(imino)pyridine ferrous dichloride, ((i)(Pr)PDI)FeCl(2) ((i)(Pr)PDI = (2,6-(i)()Pr(2)-C(6)H(3)N=CMe)(2)C(5)H(3)N), resulted in deprotonation of the chelate methyl groups, yielding the bis(enamide)pyridine iron dimethylamine adduct, ((i)(Pr)PDEA)Fe(NHMe(2)) ((i)(Pr)PDEA = (2,6-(i)Pr(2)-C(6)H(3)NC=CH(2))(2)C(5)H(3)N). Performing a similar procedure with KN(SiMe(3))(2) in THF solution afforded the corresponding bis(THF) adduct, ((i)(Pr)PDEA)Fe(THF)(2). ((i)(Pr)PDEA)Fe(NHMe(2)) has also been prepared by addition of the free amine to the iron dialkyl complex, ((i)(Pr)PDI)Fe(CH(2)SiMe(3))(2), implicating formation of a transient iron amide that is sufficiently basic to deprotonate the bis(imino)pyridine methyl groups. Deprotonation of the amine ligand in ((i)(Pr)PDEA)Fe(NHMe(2)) has been accomplished by addition of amide bases to afford the ferrous amide-ate complexes, [((i)(Pr)PDEA)Fe(mu-NMe(2))M] (M = Li, K).     

The coordination chemistry of "[BP3]NiX" platforms: targeting low-valent nickel sources as promising candidates to L3Ni=E and L3Ni(triple bond)E linkages

A series of divalent, monovalent, and zerovalent nickel complexes supported by the electron-releasing, monoanionic tris(phosphino)borate ligands [PhBP3] and [PhBPiPr3] ([PhBP3] = [PhB(CH2PPh2)3]-, [PhBPiPr3] = [PhB(CH2PiPr2)3]-) have been synthesized to explore fundamental aspects of their coordination chemistry. The pseudotetrahedral, divalent halide complexes [PhBP3]NiCl (1), [PhBP3]NiI (2), and [PhBPiPr3]NiCl (3) were prepared by the metalation of [PhBP3]Tl or [PhBPiPr3]Tl with (Ph3P)2NiCl2, NiI2, and (DME)NiCl2 (DME = 1,2-dimethoxyethane), respectively. Complex 1 is a versatile precursor to a series of complexes accessible via substitution reactions including [PhBP3]Ni(N3) (4), [PhBP3]Ni(OSiPh3) (5), [PhBP3]Ni(O-p-tBu-Ph) (6), and [PhBP3]Ni(S-p-tBu-Ph) (7). Complexes 2-5 and 7 have been characterized by X-ray diffraction (XRD) and are pseudotetrahedral monomers in the solid state. Complex 1 reacts readily with oxygen to form the four-electron-oxidation product, [[PhB(CH2POPh2)2(CH2PPh2)]NiCl] (8A or 8B), which features a solid-state structure that is dependent on its method of crystallization. Chemical reduction of 1 using Na/Hg or other potential 1-electron reductants generates a product that arises from partial ligand degradation, [PhBP3]Ni(eta2-CH2PPh2) (9). The more sterically hindered chloride 3 reacts with Li(dbabh) (Hdbabh = 2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene) to provide the three-coordinate complex [kappa2-PhBPiPr3]Ni(dbabh) (11), also characterized by XRD. Chemical reduction of complex 1 in the presence of L-type donors produces the tetrahedral Ni(I) complexes [PhBP3]Ni(PPh3) (12) and [PhBP3]Ni(CNtBu) (13). Reduction of 3 following the addition of PMe3 or tert-butyl isocyanide affords the Ni(I) complexes [PhBPiPr3]Ni(PMe3) (14) and [PhBPiPr3]Ni(CNtBu) (15), respectively. The reactivity of these [PhBP3]NiIL and [PhBPiPr3]NiIL complexes with respect to oxidative group transfer reactions from organic azides and diazoalkanes is discussed. The zerovalent nitrosyl complex [PhBP3]Ni(NO) (16) is prepared by the reaction of 1 with excess NO or by treating 12 with stoichiometric NO. The anionic Ni(0) complexes [[kappa2-PhBP3]Ni(CO)2][nBu4N] (17) and [[kappa2-PhBPiPr3]Ni(CO)2][ASN] (18) (ASN = 5-azoniaspiro[4.4]nonane) have been prepared by reacting [PhBP3]Tl or [PhBPiPr3]Tl with (Ph3P)2Ni(CO)2 in the presence of R4NBr. The photolysis of 17 appears to generate a new species consistent with a zerovalent monocarbonyl complex which we tentatively assign as [[PhBP3]Ni(CO)][nBu4N], although complete characterization of this complex has been difficult. Finally, theoretical DFT calculations are presented for the hypothetical low spin complexes [PhBP3]Ni(NtBu), [PhBPiPr3]Ni(NtBu), [PhBPiPr3]Ni(NMe), and [PhBPiPr3]Ni(N) to consider what role electronic structure factors might play with respect to the relative stability of these species.     

Tuning the electronic structure of octahedral iron complexes [FeL(X)] (L = 1-alkyl-4,7-bis(4-tert-butyl-2-mercaptobenzyl)-1,4,7-triazacyclononane,X = Cl,CH(3)O,CN, NO). The S = 1/2 <==>3/2 Spin equilibrium of [FeL(Pr)(NO)

Two new pentadentate, pendent arm macrocyclic ligands of the type 1-alkyl-4,7-bis(4-tert-butyl-2-mercaptobenzyl)-1,4,7-triazacyclononane where alkyl represents an isopropyl, (L(Pr))(2-), or an ethyl group, (L(Et))(2-), have been synthesized. It is shown that they bind strongly to ferric ions generating six-coordinate species of the type [Fe(L(alk))X]. The ground state of these complexes is governed by the nature of the sixth ligand, X: [Fe(III)(L(Et))Cl] (2) possesses an S = 5/2 ground state as do [Fe(III)(L(Et))(OCH(3))] (3) and [Fe(III)(L(Pr))(OCH(3))] (4). In contrast, the cyano complexes [Fe(III)(L(Et))(CN)] (5) and [Fe(III)(L(Pr))(CN)] (6) are low spin ferric species (S = 1/2). The octahedral [FeNO](7) nitrosyl complex [Fe(L(Pr))(NO)] (7) displays spin equilibrium behavior S = 1/2<==>S = (3)/(2) in the solid state. Complexes [Zn(L(Pr))] (1), 4.CH(3)OH, 5.0.5toluene.CH(2)Cl(2), and 7.2.5CH(2)Cl(2) have been structurally characterized by low-temperature (100 K) X-ray crystallography. All iron complexes have been carefully studied by zero- and applied-field M?ssbauer spectroscopy. In addition, Sellmann's complexes [Fe(pyS(4))(NO)](0/1+) and [Fe(pyS(4))X] (X = PR(3), CO, SR(2)) have been studied by EPR and M?ssbauer spectroscopies and DFT calculations (pyS(4) = 2,6-bis(2-mercaptophenylthiomethyl)pyridine(2-)). It is concluded that the electronic structure of 7 with an S = 1/2 ground state is low spin ferrous (S(Fe) = 0) with a coordinated neutral NO radical (Fe(II)-NO) whereas the S = 3/2 state corresponds to a high spin ferric (S(Fe) = 5/2) antiferromagnetically coupled to an NO(-) anion (S = 1). The S = 1/2<==>S = 3/2 equilibrium is then that of valence tautomers rather than that of a simple high spin<==>low spin crossover.     

Elucidation of a low spin cobalt(II) system in a distorted tetrahedral geometry

We have prepared a series of divalent cobalt(II) complexes supported by the [PhBP(3)] ligand ([PhBP(3)] = [PhB(CH(2)PPh(2))(3)](-)) to probe certain structural and electronic phenomena that arise from this strong field, anionic tris(phosphine) donor ligand. The solid-state structure of the complex [PhBP(3)]CoI (1), accompanied by SQUID, EPR, and optical data, indicates that it is a pseudotetrahedral cobalt(II) species with a doublet ground state-the first of its type. To our knowledge, all previous examples of 4-coordinate cobalt(II) complexes with doublet ground states have adopted square planar structure types. Complex 1 provided a useful precursor to the corresponding bromide and chloride complexes, ([PhBP(3)]Co(mu-Br))(2), (2), and ([PhBP(3)]Co(mu-Cl))(2), (3). These complexes were similarly characterized and shown to be dimeric in the solid-state. In solution, however, the monomeric low spin form of 2 and 3 dominates at 25 degrees C. There is spectroscopic evidence for a temperature-dependent monomer/dimer equilibrium in solution for complex 3. Furthermore, the dimers 2 and 3 did not display appreciable antiferromagnetic coupling that is typical of halide and oxo-bridged copper(II) and cobalt(II) dimers. Rather, the EPR and SQUID data for solid samples of 2 and 3 suggest that they have triplet ground states. Complexes 1, 2, and 3 are extremely oxygen sensitive. Thus, stoichiometric oxidation of 1 by dioxygen produced the 4-coordinate, high spin complex [PhB(CH(2)P(O)Ph(2))(2)(CH(2)PPh(2))]CoI, (4), in which the [PhBP(3)] ligand had undergone a 4-electron oxidation. Reaction of 1 with TlOAr (Ar = 2,6-Me(2)Ph) afforded an example of a 4-coordinate, high spin complex, [PhBP(3)]Co(O-2,6-Me(2)Ph) (5), with an intact [PhBP(3)] ligand. The latter two complexes were spectroscopically and structurally characterized for comparison to complexes 1, 2, and 3. Our data for these complexes collectively suggest that the [PhBP(3)] ligand provides an unusually strong ligand-field to these divalent cobalt complexes that is chemically distinct from typical tris(phosphine) donor ligand sets, and distinct from tridentate borato ligands that have been previously studied. Coupling this strong ligand-field with a pronounced axial distortion away from tetrahedral symmetry, a geometric consequence that is enforced by the [PhBP(3)] ligand, provides access to monomeric [PhBP(3)]CoX complexes with doublet rather than quartet ground states.     

Synthetic and structural studies on new diiron azadithiolate (ADT)-type model compounds for active site of [FeFe]hydrogenases

A series of new diiron azadithiolate (ADT) complexes (1-8), which could be regarded as the active site models of [FeFe]hydrogenases, have been synthesized starting from parent complex [(μ-SCH(2))(2)NCH(2)CH(2)OH]Fe(2)(CO)(6) (A). Treatment of A with ethyl malonyl chloride or malonyl dichloride in the presence of pyridine afforded the malonyl-containing complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(6) (1) and [Fe(2)(CO)(6)(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)CH(2) (2). Further treatment of 1 and 2 with PPh(3) under different conditions produced the PPh(3)-substituted complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(5)(PPh(3)) (3), [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(4)(PPh(3))(2) (4), and [Fe(2)(CO)(5)(PPh(3))(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)CH(2) (5). More interestingly, complexes 1-3 could react with C(60) in the presence of CBr(4) and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) via Bingel-Hirsch reaction to give the C(60)-containing complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CC(C(60))CO(2)Et]Fe(2)(CO)(6) (6), [Fe(2)(CO)(6)(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)C(C(60)) (7), and [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CC(C(60))CO(2)Et]Fe(2)(CO)(5)(PPh(3)) (8). The new ADT-type models 1-8 were characterized by elemental analysis and spectroscopy, whereas 2-4 were further studied by X-ray crystallography and 6-8 investigated in detail by DFT methods.     

Synthesis, structures, and reactivity of yttrium alkyl and alkynyl complexes with mixed Tp(Me2)/Cp ligands

The structurally characterized Tp(Me2)-supported rare earth metal monoalkyl complex (Tp(Me2))CpYCH(2)Ph(THF) (1) was synthesized via the salt-metathesis reaction of (Tp(Me2))CpYCl(THF) with KCH(2)Ph in THF at room temperature. Treatment of 1 with 1 equiv of PhC≡CH under the same conditions afforded the corresponding alkynyl complex (Tp(Me2))CpYC≡CPh(THF) (2). Complex 1 exhibits high activity toward carbodiimides, isocyanate, isothiocyanate, and CS(2); treatment of 1 with such substrates led to the formation of a series of the corresponding Y-C(benzyl) σ-bond insertion products (Tp(Me2))CpY[(RN)(2)CCH(2)Ph] (R = (i)Pr(3a), Cy(3b), 2,6-(i)Pr-C(6)H(3)(3c)), (Tp(Me2))CpY[SC(CH(2)Ph)NPh] (4), (Tp(Me2))CpY[OC(CH(2)Ph)NPh] (5), and (Tp(Me2))CpY(S(2)CCH(2)Ph) (6) in 40-70% isolated yields. Carbodiimides and isothiocyanate can also insert into the Y-C(alkynyl) σ bond of 2 to yield complexes (Tp(Me2))CpY[(RN)(2)CC≡CPh] (R = (i)Pr(7a), Cy(7b)) and (Tp(Me2))CpY[SC(C≡CPh)NPh] (9). Further investigation results indicated that 1 can effectively catalyze the cross-coupling reactions of phenylacetylene with carbodiimides. However, treatment of o-allylaniline with a catalytic amount of 1 gave only the benzyl abstraction product (Tp(Me2))CpY(NHC(6)H(4)CH(2)CH═CH(2)-o)(THF) (10), without observation of the expected organic hydroamination/cyclization product. All of these new complexes were characterized by elemental analysis and spectroscopic properties, and their solid-state structures were also confirmed by single-crystal X-ray diffraction analysis.     

Versatility of dithiophosphates in the syntheses of copper(I) complexes with bis(diphenylphosphino)alkanes: abstraction of chloride from dichloromethane

Reactions of [Cu(CH(3)CN)(4)]X (X = PF(6), BF(4)) with bis(diphenylphosphino)methane (dppm = Ph(2)PCH(2)PPh(2)) and ammonium dialkyldithiophosphates, (NH(4))[S(2)P(OR)(2)] (R = Et, (i)Pr), yield a series of novel Cu(I) polynuclear complexes, trinuclear [Cu(3)(mu-dppm)(3)(mu(3)-Cl){S(2)P(OEt)(2)}] (PF(6)) 1 and [Cu(3)(mu-dppm)(2){S(2)P(OR)(2)}(2)](PF(6)) (R = Et, 2; (i)Pr, 3), tetranuclear [Cu(4)(mu-dppm)(2) {S(2)P(OEt)(2)}(4)] 4, and hexanuclear [Cu(6)(mu-dppm)(2)(mu(4)-Cl){S(2)P(O(i)()Pr)(2)}(4)](BF(4)) 5. Similarly, the reaction of [Cu(2)(mu-L-L)(2)(CH(3)CN)(2)](PF(6))(2) (L-L, dppm, dppe = Ph(2)PCH(2)CH(2)PPh(2)) with (NH(4))[S(2)P(OR)(2)] yields dinuclear [Cu(2)(mu-dppm)(2){S(2)P(OR)(2)}(2)] 6 (R= (i)Pr, 6A; Et, 6B), trinuclear [Cu(3)(mu-dppe)(3)(mu-Cl)(2){S(2)P(O(i)Pr)(2)}] 9, and polymeric [Cu(mu(2)-dppe){S(2)P(OR)(2)}](n) (R = Et, 7; (i)Pr, 8) complexes. The formation of 1 and 5 involved the abstraction of chloride from dichloromethane when the Cu/S(2)P(OR)(2) ratio exceeded 1, but when ratio was 1:1, no Cl abstraction occurred, as in compound 4. Compound 9, however, was obtained as a 12% byproduct in the synthesis of 8 using a 1:1:1 ratio of Cu/dppe/S(2)P(O(i)Pr)(2). The chloride binds to Cu atoms in a mu(3)-Cl mode by capping one face of the Cu(3) triangle of cluster 1. A mu(4)-Cl caps a single tetragonal face of the trigonal prism of cluster 5, and in the cluster 9, two chlorides bond in mu(2)-Cl modes. Both clusters 2 and 3 exhibit the mu(3)-S mode of bonding for dtp ligands. Only cluster 5 exhibited close Cu...Cu contacts (2.997-3.0238 A). All of compounds were characterized by single-crystal X-ray diffraction and pertinent crystallographic data for 1, 5, and 9 are are follows: (1) C(79)H(76)ClCu(3)F(6)O(2)P(8)S(2), triclinic, P, a = 11.213(1) A, b = 14.142(1) A, c = 25.910(2) A, alpha = 95.328(2) degrees , beta = 99.594(2) degrees , gamma = 102.581(2) degrees , V = 3918.2(6) A(3), Z = 2; (5) C(74)H(100)BClCu(6)F(4)O(8)P(8)S(8), monoclinic, P2(1)/n, a = 25.198(4) A, b = 15.990(3) A, c = 25.421(4) A, beta = 106.027(3) degrees , V = 9845(3)A(3), Z = 4; (9) C(84)H(86)Cl(2)Cu(3)O(2)P(7)S(2), monoclinic, C2/c, with a = 24.965(3) A, b = 17.058(2) A, c = 20.253(2) A, beta = 95.351(4) degrees , V = 8587.4(17)A(3), Z = 4.     

Assembly of an allenylidene ligand, a terminal alkyne, and an acetonitrile molecule: formation of osmacyclopentapyrrole derivatives

Treatment in acetonitrile at -30 C of the hydride-alkenylcarbyne complex [OsH([triple bond]CCH=CPh2)(CH3CN)2(P(i)Pr3)2][BF4]2 (1) with (t)BuOK produces the selective deprotonation of the alkenyl substituent of the carbyne and the formation of the bis-solvento hydride-allenylidene derivative [OsH(=C=C=CPh2)(CH3CN)2(P(i)Pr3)2]BF4 (2), which under carbon monoxide atmosphere is converted into [Os(CH=C=CPh2)(CO)(CH3CN)2(P(i)Pr3)2]BF4 (3). When the treatment of 1 with (t)BuOK is carried out in dichloromethane at room temperature, the fluoro-alkenylcarbyne [OsHF([triple bond]CCH=CPh2)(CH3CN)(P(i)Pr3)2]BF4 (4) is isolated. Complex 2 reacts with terminal alkynes. The reactions with phenylacetylene and cyclohexylacetylene afford [Os[(E)-CH=CHR](=C=C=CPh2)(CH3CN)2(P(i)Pr3)2]BF4 (R = Ph (5), Cy (6)), containing an alkenyl ligand beside the allenylidene, while the reaction with acetylene in dichloromethane at -20 degrees C gives the hydride-allenylidene-pi-alkyne [OsH(=C=C=CPh2)(eta2-HC[triple bond]CH)(P(i)Pr3)2]BF4 (7), with the alkyne acting as a four-electron donor ligand. In acetonitrile under reflux, complexes 5 and 6 are transformed into the osmacyclopentapyrrole compounds [Os[C=C(CPh2CR=CH)CMe=NH](CH3CN)2]BF4 (R = Ph (8), Cy (9)), as a result of the assembly of the allenylidene ligand, the alkenyl group, and an acetonitrile molecule. The X-ray structures of 2, 5, and 8 are also reported.     

Diorganodiselenides and zinc(II) organoselenolates containing (imino)aryl groups of type 2-(RN=CH)C6H4

Several new diorganodiselenides containing (imino)aryl groups, [2-(RN[double bond, length as m-dash]CH)C(6)H(4)](2)Se(2) [R = Me(2)NCH(2)CH(2) (4), O(CH(2)CH(2))(2)NCH(2)CH(2) (5), PhCH(2) (6), 2',6'-(i)Pr(2)C(6)H(3) (7)] were obtained by reacting [2-{(O)CH}C(6)H(4)](2)Se(2) (3) with RNH(2). Treatment of the diselenides 6 and 7 with stoichiometric amounts of K-selectride or Na resulted in isolation of the selenolates K[SeC(6)H(4)(CH[double bond, length as m-dash]NCH(2)Ph)-2] (9) and Na[SeC(6)H(4)(CH[double bond, length as m-dash]NC(6)H(3)(i)Pr(2)-2',6')-2] (10), respectively. The reaction of potassium selenolates with anhydrous ZnCl(2) (2:1 molar ratio) gave Zn[SeC(6)H(4)(CH=NCH(2)Ph)-2](2) (11) and Zn[SeC(6)H(4)(CH[double bond, length as m-dash]NC(6)H(3)(i)Pr(2)-2',6')-2](2) (12). When the dark green solution obtained from diselenide 7 and an excess of Na (after removal of the unreacted metal) was reacted with anhydrous ZnCl(2) a carbon-carbon coupling reaction occurred and the 9,10-(2',6'-(i)Pr(2)C(6)H(3)NH)(2)C(14)H(10) (8) species was obtained. The compounds were investigated in solution by multinuclear NMR ((1)H, (13)C, (77)Se, including 2D and variable temperature experiments) and by mass spectrometry. The molecular structures of 6, 8, 11 and 12 were established by single-crystal X-ray diffraction. All compounds are monomeric in the solid state. In the diselenide 6 the (imino)aryl group acts as a (C,N)-ligand resulting in a distorted T-shaped coordination geometry of type (C,N)SeX (X = Se). For the zinc complexes 11 and 12 the (Se,N) chelate pattern of the selenolato ligands results in tetrahedral Zn(Se,N)(2) cores.     

Utilization of phosphinoamide ligands in homobimetallic fe and mn complexes: the effect of disparate coordination environments on metal-metal interactions and magnetic and redox properties

A series of homobimetallic phosphinoamide-bridged diiron and dimanganese complexes in which the two metals maintain different coordination environments have been synthesized. Systematic variation of the steric and electronic properties of the phosphinoamide phosphorus and nitrogen substituents leads to structurally different complexes. Reaction of [(i)PrNKPPh(2)] (1) with MCl(2) (M = Mn, Fe) affords the phosphinoamide-bridged bimetallic complexes [Mn((i)PrNPPh(2))(3)Mn((i)PrNPPh(2))] (3) and [Fe((i)PrNPPh(2))(3)Fe((i)PrNPPh(2))] (4). Complexes 3 and 4 are iso-structural, with one metal center preferentially binding to the three amide ligands in a trigonal planar arrangement while the second metal center is ligated by three phosphine donors. A fourth phosphinoamide ligand caps the tetrahedral coordination sphere of the phosphine-ligated metal center. M?ssbauer spectroscopy of complex 4 suggests that the metals in these complexes are best described as Fe(II) centers. In contrast, treatment of MnCl(2) or FeI(2) with [MesNKP(i)Pr(2)] (2) leads to the formation of the halide-bridged species [(THF)Mn(μ-Cl)(MesNP(i)Pr(2))(2)Mn(MesNP(i)Pr(2))] (5) and [(THF)Fe(μ-I)(MesNP(i)Pr(2))(2)FeI (7), respectively. Utilization of FeCl(2) in place of FeI(2), however, leads exclusively to the C(3)-symmetric complex [Fe(MesNP(i)Pr(2))(3)FeCl] (6), structurally similar to 4 but with a halide bound to the phosphine-ligated Fe center. The M?ssbauer spectrum of 6 is also consistent with high spin Fe(II) centers. Thus, in the case of the [(i)PrNPPh(2)](-) and [MesNP(i)Pr(2)](-) ligands, zwitterionic complexes with the two metals in disparate coordination environments are preferentially formed. In the case of the more electron-rich ligand [(i)PrNP(i)Pr(2)](-), complexes with a 2:1 mixed donor ligand arrangement, in which one of the ligand arms has reversed orientation relative to the previous examples, are formed exclusively when [(i)PrNLiP(i)Pr(2)] (generated in situ) is treated with MCl(2) (M = Mn, Fe): (THF)(3)LiCl[Mn(N(i)PrP(i)Pr(2))(2)(P(i)Pr(2)N(i)Pr)MnCl] (8) and [Fe(N(i)PrP(i)Pr(2))(2)(P(i)Pr(2)N(i)Pr)FeCl] (9). Bimetallic complexes 3-9 have been structurally characterized using X-ray crystallography, revealing Fe-Fe interatomic distances indicative of metal-metal bonding in complexes 6 and 9 (and perhaps 4, to a lesser extent). All of the complexes appear to adopt high spin electron configurations, and magnetic measurements indicate significant antiferromagnetic interactions in Mn(2) complexes 5 and 8 and no discernible magnetic superexchange in Fe(2) complex 4. The redox behavior of complexes 3-9 has also been investigated using cyclic voltammetry, and theoretical investigations (DFT) were performed to gain insight into the metal-metal interactions in these unique asymmetric complexes.     

Imido Complexes Derived from the Reactions of Niobium and Tantalum Pentachlorides with Primary Amines: Relevance to the Chemical Vapor Deposition of Metal Nitride Films

Reactions of niobium and tantalum pentachlorides with tert-butylamine (>/=6 equiv) in benzene afford the dimeric imido complexes [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) (90%) and [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) (79%). The niobium complex exists as two isomers in solution, while the tantalum complex is composed of three major isomers and at least two minor isomers. Analogous treatments with isopropylamine (>/=7 equiv) give the monomeric complexes NbCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2) (84%) and TaCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2) (84%). The monomeric complexes are unaffected by treatment with excess isopropylamine, while the dimeric complexes are cleaved to the monomers MCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)(2) upon addition of excess tert-butylamine in chloroform solution. Treatment of niobium and tantalum pentachlorides with 2,6-diisopropylaniline affords insoluble precipitates of [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (100%) and [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[TaCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (100%), which react with 4-tert-butylpyridine to afford the soluble complexes [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (45%) and [4-t-C(4)H(9)C(5)H(4)NH](2)[TaCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (44%). Sublimation of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), MCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2), and [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[MCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] leads to decomposition to give [MCl(3)(NR)(NH(2)R)](2) as sublimates (32-49%), leaving complexes of the proposed formulation MCl(NR)(2) as nonvolatile residues. By contrast, [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) sublimes without chemical reaction. Analysis of the organic products obtained from thermal decomposition of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) showed isobutylene and tert-butylamine in a 2.2:1 ratio. Mass spectra of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), and [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2) showed the presence of dimeric imido complexes, monomeric imido complexes, and nitrido complexes, implying that such species are important gas phase species in CVD processes utilizing these molecular precursors. The crystal structures of [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))], [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2), [NbCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2), and [TaCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) were determined. [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] crystallizes in the space group P2(1)/c with a = 12.448(3) ?, b = 10.363(3) ?, c = 28.228(3) ?, beta = 94.92(1) degrees, V = 3628(5) ?(3), and Z = 4. [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2) crystallizes in the space group P2(1)/c with a = 9.586(4) ?, b = 12.385(4) ?, c = 11.695(4) ?, beta = 112.89(2) degrees, V = 1279.0(6) ?(3), and Z = 2. [NbCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) crystallizes in the space group P2(1)/n with a = 10.285(3) ?, b = 11.208(3) ?, c = 23.867(6) ?, beta = 97.53 degrees, V = 2727(1) ?(3), and Z = 2. [TaCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) crystallizes in the space group P2(1)/n with a = 10.273(1) ?, b = 11.241(2) ?, c = 23.929(7) ?, beta = 97.69(2) degrees, V = 2695(2) ?(3), and Z = 2. These findings are discussed in the context of niobium and tantalum nitride film depositions from molecular precursors.     

Formation and reactivity of the cyclometallated N-heterocyclic carbene complexes [Ru(NHC)'(dppe)(CO)H

Thermolysis of [Ru(PPh(3))(dppe)(CO)HCl] (dppe = 1,2-bis(diphenylphosphino)ethane) with the N-heterocyclic carbenes I(i)Pr(2)Me(2) (1,3-diisopropyl-4,5-dimethyl-imidazol-2-ylidene), IEt(2)Me(2) (1,3-diethyl-4,5-dimethyl-imidazol-2-ylidene) or ICy (1,3-dicyclohexylimidazol-2-ylidene) gave the cyclometallated carbene complexes [Ru(NHC)'(dppe)(CO)H] (NHC = I(i)Pr(2)Me(2), 4; IEt(2)Me(2), 5; ICy, 6). Dissolution of 4 in CH(2)Cl(2) or CHCl(3) gave the trans-Cl-Ru-P complex [Ru(I(i)Pr(2)Me(2))'(dppe)(CO)Cl] (7), which converted over hours at room temperature to the trans-Cl-Ru-CO isomer 7'. Chloride abstraction from 7 by NaBPh(4) under an atmosphere of H(2) produced the cationic mono-hydride complex [Ru(I(i)Pr(2)Me(2))(dppe)(CO)H][BPh(4)] (9), which could also be formed by protonating 4 with 1 eq HBF(4)·OEt(2). Treatment of 4 with excess HBF(4)·OEt(2) followed by extraction into MeCN produced the dicationic acetonitrile complex [Ru(I(i)Pr(2)Me(2))(dppe)(CO)(NCMe)(2)][BF(4)](2) (10). The structures of 6, 7, 7' and 10 have been determined by X-ray crystallography.     

Bridging nitrate groups in [Mn(4)O(3)(NO(3))(O(2)CMe)(3)(R(2)dbm)(3)] (R = H, Et) and [Mn(4)O(2)(NO(3))(O(2)CEt)(6)(bpy)(2)](ClO(4)): acidolysis routes to tetranuclear manganese carboxylate complexes

New synthesis procedures are described to tetranuclear manganese carboxylate complexes containing the [Mn(4)O(2)](8+) or [Mn(4)O(3)X](6+) (X(-) = MeCO(2)(-), F(-), Cl(-), Br(-), NO(3)(-)) core. These involve acidolysis reactions of [Mn(4)O(3)(O(2)CMe)(4)(dbm)(3)] (1; dbm is the anion of dibenzoylmethane) or [Mn(4)O(2)(O(2)CEt)(6)(dbm)(2)] (8) with HX (X(-) = F(-), Cl(-), Br(-), NO(3)(-)); high-yield routes to 1 and 8 are also described. The X(-) = NO(3)(-) complexes [Mn(4)O(3)(NO(3))(O(2)CR)(3)(R'(2)dbm)(3)] (R = Me, R' = H (6); R = Me, R' = Et (7); R = Et, R' = H (12)) represent the first synthesis of the [Mn(4)O(3)(NO(3))](6+) core, which contains an unusual eta(1):mu(3)-NO(3)(-) group. Treatment of known [Mn(4)O(2)(O(2)CEt)(7)(bpy)(2)](ClO(4)) with HNO(3) gives [Mn(4)O(2)(NO(3))(O(2)CEt)(6)(bpy)(2)](ClO(4)) (15) containing a eta(1):eta(1):mu-NO(3)(-) group bridging the two body Mn(III) ions of the [Mn(4)O(2)](8+) butterfly core. Complex 7 x 4CH(2)Cl(2) crystallizes in space group P2(1)2(1)2(1) with (at -168 degrees C) a = 21.110(3) A, b = 22.183(3) A, c = 15.958(2) A, Z = 4, and V = 7472.4(3) A(3). Complex 15 x (3)/(2)CH(2)Cl(2) crystallizes in space group P2(1)/c with (at -165 degrees C) a = 26.025(4) A, b = 13.488(2) A, c = 32.102(6) A, beta = 97.27(1) degrees, Z = 8, and V = 11178(5) A(3). Complex 7 contains a [Mn(4)(mu(3)-O)(3)(mu(3)-NO(3))](6+) core (3Mn(III), Mn(IV)) as seen for previous [Mn(4)O(3)X](6+) complexes. Complex 15 contains a butterfly [Mn(4)(mu(3)-O)(2)](8+) core. (1)H NMR spectra have been recorded for all complexes reported in this work and the various resonances assigned. All complexes retain their structural integrity on dissolution in chloroform and dichloromethane. Magnetic susceptibility (chi(M)) data were collected on 12 in the 5-300 K range in a 10.0 kG (1 T) field. Fitting of the data to the theoretical chi(M) vs T expression appropriate for a [Mn(4)O(3)X](6+) complex of C(3)(v)() symmetry gave J(34) = -23.9 cm(-)(1), J(33) = 4.9 cm(-)(1), and g = 1.98, where J(34) and J(33) refer to the Mn(III)Mn(IV) and Mn(III)Mn(III) pairwise exchange interactions, respectively. The ground state of the molecule is S = 9/2, as found previously for other [Mn(4)O(3)X](6+) complexes. This was confirmed by magnetization data collected at various fields and temperatures. Fitting of the data gave S = 9/2, D = -0.45 cm(-1), and g = 1.96, where D is the axial zero-field splitting parameter.     

Synthesis and characterization of organo-scandium and yttrium complexes stabilized by phosphinoamide ligands

Addition of three equivalents of phosphinoamine, (ArNHP(i)Pr(2)) [Ar = 3,5-dimethylphenyl] to M(CH(2)SiMe(3))(3)(THF)(2) [M = Sc, Y] precursors gives complexes of the form (ArNP(i)Pr(2))(3)M(THF) [M = Sc, Y]. In the case of scandium, addition of Sc(CH(2)SiMe(3))(3)(THF)(2) to (ArNP(i)Pr(2))(3)Sc(THF) affords (ArNP(i)Pr(2))(2)Sc(CH(2)SiMe(3))(THF), which has been isolated and structurally characterized. In contrast, addition of Y(CH(2)SiMe(3))(3)(THF)(2) to (ArNP(i)Pr(2))(3)Y(THF) generates a distribution of phosphinoamide-containing products consistent with the formulations (ArNP(i)Pr(2))(2)Y(CH(2)SiMe(3))(THF) and (ArNP(i)Pr(2))Y(CH(2)SiMe(3))(2)(THF), as ascertained using NMR spectroscopy. Attempts to react the alkyl-containing phosphinoamide complexes with small molecules such as H(2) led to disproportionation type processes.     

Tris(pyrazolyl)borate carbosilane dendrimers and metallodendrimers

A modified tris(pyrazolylborate) ligand has been prepared in two steps. First, reaction of triisopropylborate with allylmagnesium bromide and further treatment with benzoyl chloride gave CH(2) = CHCH(2)B(O(i)Pr), which was then reacted with potassium pyrazolate and pyrazole to give the compound K[CH(2) = CHCH(2)Bpz(3)]. The new allyl-containing scorpionate anion of acts as a bi- or tri-dentate ligand, as shown by the mononuclear complexes [CH(2) = CHCH(2)Bpz(3)M(LL)] (M = Rh, LL = nbd, ; LL = tfb, ; LL = (CO)(PPh(3)), ; M = Ir, LL = cod, ), obtained from reactions of the chlorido-bridged dinuclear complexes [{M(mu-Cl)(LL)}(2)] with 2. Furthermore, the borate represents a key material to achieve the attachment of tris(pyrazolyl)borate groups to the peripheries of carbosilane dendrimers. Thus, the platinum-catalyzed hydrosilylation reactions of compound with the dendritic cores Si[(CH(2))(3)SiMe(2)H](4) (G(0)-(SiH)(4)), (G(1)-(SiH)(8)), and (G(2)-(SiH)(16)) gave the corresponding borate-containing dendrimers Si[(CH(2))(3)SiMe(2)(CH(2))(3)B(O(i)Pr)(2)](4) (G(0)-B(4)), Si[(CH(2))(3)SiMe{(CH(2))(3)SiMe(2)(CH(2))(3)B(O(i)Pr)(2)}(2)](4) (G(1)-B(8)), and Si[(CH(2))(3)SiMe{(CH(2))(3)SiMe[(CH(2))(3)SiMe(2)(CH(2))(3)B(O(i)Pr)(2)](2)}(2)](4) (G(2)-B(16)) selectively in the anti-Markovnikov direction. Further reactions of G(0)-B(4), G(1)-B(8) and G(2)-B(16) with potassium pyrazolate and pyrazole rendered the corresponding polyanionic dendrimers K(4)[Si{(CH(2))(3)SiMe(2)(CH(2))(3)Bpz(3)}(4)] (G(0)-(Bpz(3))(4)), G(1)-(Bpz(3))(8), and G(2)-(Bpz(3))(16), respectively, which contain 4, 8, and 16 tris(pyrazolyl)borate groups symmetrically located around the dendritic peripheries. These unusual polyanionic dendrimers are excellent scaffolds to support metal centres, as shown by the reactions of G(0)-(Bpz(3))(4), G(1)-(Bpz(3))(8), and G(2)-(Bpz(3))(16) with [{Rh(mu-Cl)(nbd)}(2)] to give the neutral rhodadendrimers [Si{(CH(2))(3)SiMe(2)(CH(2))(3)Bpz(3)Rh(nbd)}(4)] G(0)-(Bpz(3)Rh)(4), G(1)-(Bpz(3)Rh)(8) and G(2)-(Bpz(3)Rh)(16) as stable solids in excellent yields. Following this protocol, mixed rhodium/iridium metallodendrimers can be prepared.     

Cationic rhodium mono-phosphine fragments partnered with carborane monoanions [closo-CB11H6X6]- (X = H, Br). Synthesis, structures and reactivity with alkenes

Addition of the new phosphonium carborane salts [HPR(3)][closo-CB(11)H(6)X(6)] (R = (i)Pr, Cy, Cyp; X = H 1a-c, X = Br 2a-c; Cy = C(6)H(11), Cyp = C(5)H(9)) to [Rh(nbd)(mu-OMe)](2) under a H(2) atmosphere gives the complexes Rh(PR(3))H(2)(closo-CB(11)H(12)) 3 (R = (i)Pr 3a, Cy 3b, Cyp 3c) and Rh(PR(3))H(2)(closo-CB(11)H(6)Br(6)) 4 (R = (i)Pr 4a, Cy 4b, Cyp 4c). These complexes have been characterised spectroscopically, and for 4b by single crystal X-ray crystallography. These data show that the {Rh(PR(3))H(2)}(+) fragment is interacting with the lower hemisphere of the [closo-CB(11)H(6)X(6)](-) anion on the NMR timescale, through three Rh-H-B or Rh-Br interactions for complexes 3 and 4 respectively. The metal fragment is fluxional over the lower surface of the cage anion, and mechanisms for this process are discussed. Complexes 3a-c are only stable under an atmosphere of H(2). Removing this, or placing under a vacuum, results in H(2) loss and the formation of the dimer species Rh(2)(PR(3))(2)(closo-CB(11)H(12))(2) 5a (R = (i)Pr), 5b (R = Cy), 5c (R = Cyp). These dimers have been characterised spectroscopically and for 5b by X-ray diffraction. The solid state structure shows a dimer with two closely associated carborane monoanions surrounding a [Rh(2)(PCy(3))(2)](2+) core. One carborane interacts with the metal core through three Rh-H-B bonds, while the other interacts through two Rh-H-B bonds and a direct Rh-B link. The electronic structure of this molecule is best described as having a dative Rh(I) --> Rh(III), d(8)--> d(6), interaction and a formal electron count of 16 and 18 electrons for the two rhodium centres respectively. Addition of H(2) to complexes 5a-c regenerate 3a-c. Addition of alkene (ethene or 1-hexene) to 5a-c or 3a-c results in dehydrogenative borylation, with 1, 2, and 3-B-vinyl substituted cages observed by ESI-MS: [closo-(RHC[double bond, length as m-dash]CH)(x)CB(11)H(12-x)](-)x = 1-3, R = H, C(4)H(9). Addition of H(2) to this mixture converts the B-vinyl groups to B-ethyl; while sequential addition of 4 cycles of ethene (excess) and H(2) to CH(2)Cl(2) solutions of 5a-c results in multiple substitution of the cage (as measured by ESI-MS), with an approximately Gaussian distribution between 3 and 9 substitutions. Compositionally pure material was not obtained. Complexes 4a-c do not lose H(2). Addition of tert-butylethene (tbe) to 4a gives the new complex Rh(P(i)Pr(3))(eta(2)-H(2)C=CH(t)Bu)(closo-CB(11)H(6)Br(6)) 6, characterised spectroscopically and by X-ray diffraction, which show coordination of the alkene ligand and bidentate coordination of the [closo-CB(11)H(6)Br(6)](-) anion. By contrast, addition of tbe to 4b or 4c results in transfer dehydrogenation to give the rhodium complexes Rh{PCy(2)(eta(2)-C(6)H(9))}(closo-CB(11)H(6)Br(6)) 7 and Rh{PCyp(2)(eta(2)-C(5)H(7))}(closo-CB(11)H(6)Br(6)) 9, which contain phosphine-alkene ligands. Complex has been characterised crystallographically.     

From tetrahydroborate- to aminoborylvinylidene-osmium complexes via alkynyl-aminoboryl intermediates

The tetrahydroborate OsH(η(2)-H(2)BH(2))(CO)(P(i)Pr(3))(2) (1) reacts with aniline and p-toluidine to give the aminoboryl derivatives [chemical structure: see text] (R = H (2), CH(3) (3)) and four H(2) molecules. Treatment of 2 and 3 with phenylacetylene gives Os{B(NHC(6)H(4)R)(2)}(C≡CPh)(CO)(P(i)Pr(3))(2) (R = H (4), CH(3) (5)), which react with HBF(4) to afford the amino(fluoro)boryl species Os{BF(NHC(6)H(4)R)}(C≡CPh)(CO)(P(i)Pr(3))(2) (R = H (6), CH(3) (7)). In contrast to HBF(4), the addition of acetic acid to 4 and 5 induces the release of phenylacetylene and the formation of the six-coordinate derivatives Os{B(NHC(6)H(4)R)(2)}(κ(2)-O(2)CCH(3))(CO)(P(i)Pr(3))(2) (R = H (8), CH(3) (9)). The coordination number six for 4 and 5 can be also achieved by addition of CO. Under this gas Os{B(NHC(6)H(4)R)(2)}(C≡CPh)(CO)(2)(P(i)Pr(3))(2) (R = H (10), CH(3) (11)) are formed. In toluene, these alkynyl-aminoboryl compounds evolve into the aminoborylvinylidenes Os{═C═C(Ph)B(NHC(6)H(4)R)(2)}(CO)(2)(P(i)Pr(3))(2) (R = H (12), CH(3) (13)) via a unimolecular 1,3-boryl migration from the metal to the C(β) atom of the alkynyl ligand. Similarly to 4 and 5, complexes 6 and 7 coordinate CO to give Os{BF(NHC(6)H(4)R)}(C≡CPh)(CO)(2)(P(i)Pr(3))(2) (R = H (15), CH(3) (16)), which evolve to Os{═C═C(Ph)BF(NHC(6)H(4)R)}(CO)(2)(P(i)Pr(3))(2) (R = H (17), CH(3) (18)).