Diffractive scanning mechanism for laser marker

We present a new idea of marking based on spectral properties of CO₂ laser radiation. The idea has been illustrated on RF excited waveguide CO₂ lasers in different configurations: single channel, multi-waveguide and slab-waveguide ones. The pulse operation of the laser has been considered as well. The advantage of the presented diffraction marker is avoiding complicated and fallible mechanical elements. The only executive elements of the marker are a diffraction grating and a piezoceramic transducer. It has been shown that the slab-waveguide configuration of the RF excited CO₂ laser equipped with an unstable resonator is the most promising configuration for application to the diffraction marker.     

光折变法制备的As2S8条形波导的光阻断效应

实验研究了As₂S₈薄膜光折变现象.提出并采用紫外光激励的方法试制了As₂S₈条形波导，导模激励显示该波导具有良好的导波特性.在此基础上，考察了As₂S₈条波导的光阻断效应，实现了光-光效应的开关功能. 关键词： 光波导技术 2S₈条形波导')" href="#">As₂S₈条形波导 光阻断效应 光激励法     

Optical waveguides in LiNbO<Subscript>3</Subscript> and stoichiometric LiNbO<Subscript>3</Subscript> crystals by proton exchange

The formation of optical planar waveguides in LiNbO₃ and stoichiometric LiNbO₃ crystals by proton exchange was reported. The prism-coupling method was used to characterize the dark-line spectroscopy at the wavelength of 633 and 1539 nm, respectively. The mode optical near-field outputs from proton-exchanged LiNbO₃ and SLN waveguides at 633 nm were presented. The mode field from stoichiometric LiNbO₃ (SLN) waveguide is lighter and more uniform than that from LiNbO₃ waveguide, which means the quality of the waveguide in SLN crystal is better than that of the LiNbO₃ waveguide. For proton-exchanged LiNbO₃ waveguides, the evolution of the refractive index profile with annealing was presented. The disorder profiles of Nb atoms in proton-exchanged LiNbO₃ waveguides were obtained by Rutherford backscattering/channeling technique. It is shown that the longer the exchange time, the larger the displacement of Nb atoms. Supported by the National Natural Science Foundation of China (Grant No. 10475052) and the Scientific Research Start-up Financing of Qufu Normal University     

Output mode characteristics of an in-phase locked gain waveguide array CO2 laser

In this paper,experimental and theoretical studies of the output mode characteristics of an in-phase locked gain waveguide array CO 2 laser are reported.The experimental results of the optical oscillation mode frequency,the far-field intensity distribution and the burnt pattern of the sliced waveguide array laser are obtained.A revised mode expression of the rectangle waveguide,which is suited for this waveguide array CO 2 laser,is proposed.The theoretical simulation results based on the revised mode expression are shown to be in good agreement with the experimental results.     

Loss reduction of dielectric-coated metallic hollow waveguides for CO2 laser light transmission

A condition for reducing transmission loss of a dielectric-coated metallic hollow waveguide is shown theoretically when the inner metallic surface is not perfect. It is also shown that the transmission loss for CO₂ laser light is 10.6 μm wavelength is able to be estimated from an attenuation spectrum of a short waveguide. By fabricating a ZnSe coated Ag hollow waveguide of short length, we have shown that it has a lower loss than a Ge coated waveguide for CO₂ laser light.     

A dielectric rod waveguide coupled with metal rectangular waveguide

Measurements have been done in the millimeter wave region on a composite waveguide which comprises a dielectric rod waveguide connecting two metal rectangular waveguides. Such a waveguide has been used by us in a Josephson harmonic mixer installed in a small metal cryostat, to prevent the thermal invasion from outside environment and to transmit both signal and LO waves with small losses. The measured transmission loss, that is caused mainly by the coupling loss between metal rectangular waveguides (TE₁₀ mode) and a dielectric rod waveguide (HE₁₁ mode), has been less than 2dB in the frequency range of 52–104 GHz.     

A DC excited waveguide multibeam CO2 laser using high frequency pre-ionization technique

High power industrial multibeam CO₂ lasers consist of a large number of closely packed parallel glass discharge tubes sharing a common plane parallel resonator. Every discharge tube forms an independent resonator. When discharge tubes of smaller diameter are used and the Fresnel numberN ≪ 1 for all resonators, they operate in waveguide mode. Waveguide modes have excellent discrimination of higher order modes. A DC excited waveguide multibeam CO₂ laser is reported having six glass discharge tubes. Simultaneous excitation of DC discharge in all sections is achieved by producing pre-ionization using an auxiliary high frequency pulsed discharge along with its other advantages. Maximum 170 W output power is obtained with all beams operating in EH₁₁ waveguide mode. The specific power of 28 W/m is much higher as compared to similar AC excited waveguide multibeam CO₂ lasers. Theoretical analysis shows that all resonators of this laser will support only EH₁₁ mode. This laser is successfully used for woodcutting     

WKB approximation for optical modes in a periodic planar waveguide

The application of the WKB method to a periodic dielectric graded-index waveguide is presented. Its justification is then verified by calculating the complex effective index of a graded-index waveguide operating in the basic TE₀ mode with three radiating diffraction orders.     

Propagation of the <Emphasis Type="Italic">H</Emphasis><Subscript>10</Subscript> mode in a rectangular waveguide with a dielectric discontinuity

The transmission of the H ₁₀ wave through a waveguide-capillary cavity in the form of a section of a rectangular waveguide with a square liquid-filled capillary inside is studied theoretically. The capillary passes through the center of the waveguide perpendicularly to its wide walls. The problem is solved by constructing the mirror images of the capillary on the narrow walls of the waveguide with subsequent consideration of the diffraction of the Brillouin components of the H ₁₀ waveguide mode by a periodic “array of capillaries.” It is shown that a resonance minimum in the frequency dependence of the energy coefficient of transmission of the H ₁₀ wave through the waveguide-capillary cavity can be explained by the destructive interference of diffraction harmonics propagating in antiphase. The experimentally found existence of the capillary optimum dimension at which the resonance minimum is the most pronounced is corroborated analytically.     

近场光学显微镜研究CdS0.65Se0.35纳米带空间分辨光致荧光谱

通过热蒸发方法成功制备出CdS_0.65Se_0.35纳米带，得到的纳米带表面光滑，宽度厚度均一，表现出很高的结晶质量.使用近场光学显微镜对纳米带室温下的带边荧光波导和光致荧光近场光谱进行研究.发现CdS_0.65Se_0.35纳米带呈现良好的光波导的特性；同时通过近场光学显微镜得到的空间分辨光谱，发现随着传播距离的增大，纳米带的光致荧光光谱有持续的红移现象.这种光谱红移现象是带间跃迁过程中带尾态的吸收效应引起的，并作了光谱带尾态吸收的理论模拟与实验结果进行比较.光波导传输过程中光谱的变化反映了信息在整个传导过程中的情况，体现了信息传递过程中的稳定性和有效性.三元合金材料CdS_0.65Se_0.35纳米带的波导和光谱性质研究，对于其他组分可调的三元合金纳米结构的制备和研究，及发展新型的纳米功能器件有重要意义.     

Quartz CO2 waveguide laser with a separated diffraction grating

A quartz CO₂ waveguide laser with external totally reflecting mirrors and a NaCl plate for the output power coupling is described. The output power was measured as a function of the distance of the mirrors from the waveguide aperture. Using a diffraction grating instead of one of the mirrors the output power at the 10 P(20) line was measured as a function of the mirror position. The results sustain the assumption of a multimode waveguide structure.     

Optothermal spectroscopy of CH3CN by a waveguide CO2 laser: Atlas of absorption lines

An investigation of the absorption of CH₃CN at 63 lines of a tunable waveguide CO₂ laser has been performed using the optothermal technique.     

Hybrid mode trasmission in 62-m corrugated waveguide

Experimental measurements by wavepacket reflectometry are carried out to verify the low transmission loss of hybrid mode on HE₁₁ in the corrugated waveguide with 88.9 mm in diameter. The HE₁₁ mode is injected into the 62-m straight circular corrugated waveguide and the beat between the HE₁₁ and HE₂₁ (including degenerated TE₀₁ and TM₀₂) modes is observed. The loss is too small to measure and inferred to be less than 2 db/km. The result shows that the use of HE₁₁ mode for electron cyclotron heating system is suitable.     

Polarization Insensitive Wavelength Conversions by a LiNbO3 Waveguide Using a Multi-Ring Configuration

A novel configuration is proposed for polarization insensitive wavelength conversions using a LiNbO₃ waveguide with a periodically domain inverted structure. The proposed configuration consists of multiple rings, which are connected by a polarization sensitive wavelength converter such as the LiNbO₃ waveguide described. One ring containing a pump light source is used to pump the wavelength converter bidirectionally, while the other rings containing a polarization beam splitter and a 90° polarization rotator are used to couple in the input signal and extract the converted light. The proposed method is proven experimentally by the wavelength conversion based on sum frequency generation.     

Diffraction Radiation from a Slot in the Impedance End of a Semi-Infinite Rectangular Waveguide

Using the induced magnetomotive force method, we obtain an approximate analytical solution of the problem of diffraction of the H₁₀ mode by a narrow slot which is cut in the impedance finite-thickness wall on the end of a semi-infinite rectangular waveguide and radiates into free half-space over an infinite, perfectly conducting screen. The scattering-matrix coefficients of a slotted waveguide radiator are studied numerically for the values of the complex surface impedance which correspond to some particular types of a thin-film coating of the waveguide end wall.     

Investigation of the phase transitions of ferroelectric KIO3 and KNbO3 crystals by optical diffraction

Optical diffraction is reviewed as a technique for investigation of the phase transitions in crystals with a multidomain structure. It has been used to study the phase transitions in KIO₃ and KNbO₃ single crystals. Strong optical diffraction bands resulted from electric domains in KNbO₃ crystals and their change with temperature were observed when a laser beam passed through the crystals. The diffraction patterns observed changed abruptly at 427°C, 223°C, and -50°C respectively, at which KNbO₃ crystals undergo structural phase transitions. It is considered that the change of the diffraction patterns with temperature is due to change of the electric domains in the crystals.     

Theoretical expression for change of extraordinary refractive index in annealed proton exchanged LiNbO3 optical waveguides

A general expression for the change in extraordinary refractive index of the annealed proton exchanged LiNbO₃ waveguide has been deduced. The expression deduced explains the experimental results of decrease in change of extraordinary refractive index with annealing. The effect of annealing time has also been incorporated following Cao's model (Cao, Ramaswamy, Srivastava, J. Lightwave Technol. 10 (1992) 1302–1313). The concentration profile of protons in the annealed waveguide has been deduced theoretically, which is consistent with the previous results. The spontaneous polarization has been considered as the central mechanism for change in extraordinary refractive index due to proton exchange with annealing.     

Acoustooptic extension of the frequency tunability of CW CO2 lasers: New FIR lasers emissions from CH3OH and13CH3OH

We have increased the frequency tunability of our CW waveguide CO₂ lasers by means of an acoustooptic amplitude modulator, operating at the fixed frequency of 90 MHz. The up-shifted, or down-shifted, laser optical sideband can be generated independently by adjusting the orientation of the modulator. The efficiency is larger than 50%. The frequency tunability of the CO₂ laser around each laser line is thus increased by 180 MHz. To demonstrate the possibilities of this method, a source composed of the above modulator and of a CW, 300 MHz tunable waveguide CO₂ laser has been used for the search of new large offset FIR laser lines from optically pumped CH₃OH and¹³CH₃OH molecules. As a result 15 and 10 new large offset laser lines were discovered respectively. New assignments of some laser lines are also proposed. We have also measured the Stark effect, the offset, and the polarization of other already known lines. In particular a Stark effect frequency tuning of about 1 GHz is demonstrated for a laser line at 208.399 m.     

White light interferometry test and analysis of LiNbO3 polarizer

White light interferometer can be used to measure the amplitude extinction ratio (ER) of polarizer and coupling distribution in fiber. A LiNbO₃ polarizer coupled with a polarization maintaining fiber and a silica planar waveguide at the two ends was measured using white light interferometer. According to the principles of optical coherence domain polarimeter (OCDP) technique, the test scheme is analyzed and presented to measure the ER of LiNbO₃ polarizer with its apparatus proposed correspondingly. By analyzing the interference intensity, both the ER of LiNbO₃ polarizer and its coupling crosstalk with optical fiber and waveguide are obtained. The results illustrate that the ER of a 5 mm-long LiNbO₃ polarizer is 71 dB and the crosstalk of the coupling points are around 40 dB. The results have good agreement with analysis.     

New CH2F2 FIR laser lines pumped by a tunable WG CO2 laser

8 new large offset FIR laser lines of CH₂F₂ have been discovered by pumping with a high tunability waveguide CW CO₂ laser. Optoacoustic measurements of CH₂F₂ have also been performed and the pump offsets of the new and of previously known lines have been measured and checked. Some assignments are proposed and a few assignments found in literature are checked