New (p, ρ, T) data for carbon dioxide – Nitrogen mixtures from (250 to 400) K at pressures up to 20 MPa

Comprehensive (p, ρ, T) measurements on two binary mixtures (0.10 CO₂ + 0.90 N₂ and 0.15 CO₂ + 0.85 N₂) were carried out in the gas phase at seven isotherms between (250 and 400) K and pressures up to 20 MPa using a single sinker densimeter with magnetic suspension coupling. A total of 69 (p, ρ, T) data for the first mixture and 69 (p, ρ, T) data for the second are presented in this article. The uncertainty in density was estimated to be (0.02 to 0.15)%, while the uncertainty in temperature was 3.9 mK and the uncertainty in pressure was less than 0.015% (coverage factor k = 2). Experimental results were compared with densities calculated from the GERG equation of state and with data reported by other authors for similar mixtures. Results yielded that, while deviations between experimental data and values calculated from the GERG equation were lower than 0.05% in density for low pressures, the relative error at high pressures and low temperatures increased to about (0.2 to 0.3)%. The main aim of this work was to contribute to an accurate density data base for CO₂/N₂ mixtures and to check or improve equations of state existing for these binary mixtures.     

Structure, crystal chemistry and thermal evolution of the δ-Bi2O3-related phase Bi9ReO17

The thermal evolution and structural properties of fluorite-related δ-Bi₂O₃-type Bi₉ReO₁₇ were studied with variable temperature neutron powder diffraction, synchrotron X-ray powder diffraction and electron diffraction. The thermodynamically stable room-temperature crystal structure is monoclinic P2₁/c, a=9.89917(5), b=19.70356(10), c=11.61597(6) Å, β=125.302(2)° (R_p=3.51%, wR_p=3.60%) and features clusters of ReO₄ tetrahedra embedded in a distorted Bi–O fluorite-like network. This phase is stable up to 725 °C whereupon it transforms to a disordered δ-Bi₂O₃-like phase, which was modeled with δ-Bi₂O₃ in cubic Fm3¯m with a=5.7809(1) Å (R_p=2.49%, wR_p=2.44%) at 750 °C. Quenching from above 725 °C leads to a different phase, the structure of which has not been solved but appears on the basis of spectroscopic evidence to contain both ReO₄ tetrahedra and ReO₆ octahedra.     

Modified One‐Pot Protocol for the Preparation of Thioglycosides from Unprotected Aldoses via S‐Glycosyl Isothiouronium Salts*

An efficient one‐pot protocol for the direct preparation of thioglycosides starting from unprotected reducing sugars via S‐glycosyl isothiouronium salts is reported. In this one‐pot methodology, BF₃ · OEt₂ has been used as a general catalyst for both per‐O‐acetylation of sugars and conversion of sugar per‐O‐acetates into S‐glycosyl isothiouronium salts, which was allowed to react with alkylating agents in the presence of a base to furnish thioglycosides in excellent yield.     

Separation and determination of sugars by reversed-phase high-performance liquid chromatography after pre-column microwave-assisted derivatization

In this study the possibility of derivatizing sugars using microwave irradiation was investigated. The amount of reagent, irradiation intensity, and derivatization time were optimized. In the derivatization of sugars with p-nitroaniline the reaction is complete within 5 min at 600 W when the p-nitroaniline-to-sugar and NaBH₃CN-to-sugar mole ratios were above 1.4 and 3.1, respectively. A Doehlert design was used to optimize the mobile phase for separation of p-nitroaniline-labeled sugars; and the best separation was obtained by use of 0.01 mol L⁻¹ acetate buffer at pH 4.40 containing 11.0% acetonitrile. Analysis using this method was highly sensitive and analysis time was short. Finally, a food sample was analyzed using the proposed method.     

载有C60的TiO2纳米粒子光催化活性

以水溶性C₆₀和TiO₂粒子为前驱体,采用水热法制备了载有C₆₀的锐钛矿型TiO₂纳米粒子。应用X射线衍射、透射电子显微镜、红外光谱、紫外-可见漫反射光谱、荧光光谱对产物进行了表征。以对-硝基苯酚为模型污染物研究了产物的光催化活性,结果表明适量负载C₆₀可以提高TiO₂纳米粒子的光催化活性,C₆₀起着传输电子、促进TiO₂光生载流子分离的作用,且经7次循环使用后对-硝基苯酚的降解效率仍能达到74%。讨论了载有C₆₀的TiO₂纳米粒子光催化降解对-硝基苯酚的机理。     

The importance of valencep functions in the bonding of Na2, K2, and Cu2 and their positive and negative ions

Summary The relative importance of the valencep functions for describing the bonding in the valence isoelectronic Na₂, K₂, and Cu₂ molecules and their positive and negative ions is investigated. In absolute magnitude the contribution of thep functions to the dissociation energy follows the trend Cu>Na>K while by percentage of the dissociation energy the importance of thep functions follows the polarizabilities, i.e. K>Na>Cu. The bonding in K₂, K ₂ ⁺ , and K ₂ ^– is analyzed to explain the observed trends.Dedicated to Prof. Klaus Ruedenberg     

Thermodynamic analysis of equilibria between binary liquid and solid solutions in ternary systems. Application to systems in which two guests compete for sites in the same host,tetrakis(4-methylpyridine)nickel(II) isothiocyanate

A thermodynamic analysis is presented of the equilibria between liquid solutions of guest A in guest B and solid solutions of HA in HB, where HA and HB are isomorphous 1:1 compounds of these guests with the host H. (The treatment is applicable whether or not HA and HB are inclusion compounds.) The mole ratio of A to B in the liquid,R ₁, is generally different from the same ratio in the solid,R _s. Data on many systems have indicated a linear relation between InR ₁, and InR _s, but to date no theoretical basis has been forthcoming. The present analysis shows that this relation is usually sigmoidal in shape but, with certain restrictions, is nearly linear. The slope and intercept are interpreted in terms of the equilibrium constant for the displacement of A from HA by B and the deviations from ideality in the liquid and solid phases. If the deviations from ideality in the liquid phase are known or can be estimated, those for the solid phase can be determined, and thermodynamic equilibrium constants and standard free energy changes for the displacement of A by B calculated. These methods were applied to available data for the following pairs of guests with the host Ni(4-mepy)₄(NCS)₂:p-xylene with each ofp-dibromobenzenp-xylene-d₆,p-xylene-d ₁₀,p-bromotoluene,p-chlorotoluene,p-dichlorobenzene,p-fluorotoluene, ethylbenzene, toluene, and benzene, and the pairsp-dichlorobenzene/p-chlorotoluene and ethylbenzene/ toluene.     

The metastable Ni7±xS6, and mixed Ni6±x(S1−ySey)5, phases

The closely related, narrowly non-stoichiometric, metastable as well as thermodynamically stable “phases” in the metal-rich part of the Ni–S phase diagram near the nominal composition Ni_7±xS₆ have been carefully re-investigated via electron diffraction and transmission electron microscope imaging. Two quite distinct polymorphs have been identified, a minority incommensurate interface-modulated polymorph and a (heavily twinned) majority I1a1, a=2a_p, b=2b_p, c=−a_p+c_p superstructure (of an underlying Bmmb, a_p3.3, b_p16.4, c_p11.3 Å parent structure) polymorph. The incommensurate polymorph is shown to be very closely related to the only known polymorph of Ni_6±xSe₅ and is rapidly stabilized to room temperature upon doping of the sulfide compounds with selenium.     

(p, ρ, T, x) properties for CO2/isobutane binary mixtures at T = (280 to 440) K and (3 to 200) MPa

The (p, ρ, T, x) properties for binary mixtures of CO₂ (volume fraction purity 0.99999) and isobutane (mole fraction purity 0.99988) {x₁ CO₂ + x₂ isobutane (x₁ = 0.2482, 0.4718, and 0.7506)} were measured in the compressed liquid phase using a metal-bellows variable volumometer. Measurements were conducted from T = (280 to 440) K and (3 to 200) MPa. The expanded uncertainties (k = 2) were estimated to be: temperature, <3 mK; pressure, 1.5 kPa (p ? 7 MPa), 0.06% (7 MPa < p ? 50 MPa), 0.1% (50 MPa < p ? 150 MPa), 0.2% (p > 150 MPa); density, 0.10%; and composition, 4.4 · 10⁻⁴. At >100 MPa and T = (280 or 440) K, the uncertainties in the density measurements increased to 0.14% and 0.22%, respectively. The data are compared with the available equation of state. The excess molar volumes, , of the mixtures were calculated and plotted as a function of temperature and pressure.     

Luminescent dual sensor for time-resolved imaging of pCO2 and pO2 in aquatic systems

An optical dual sensor for the two-dimensional detection of pCO₂ and pO₂ is described. Tris(tetraoctylammonium)-8-hydroxypyrene-1,3,6-trisulfonate ((TOA)₃HPTS) acting together with the lipophilic buffer tetraoctylammonium hydrogen carbonate ((TOA)HCO₃) as pCO₂-sensing system along with the oxygen indicator tris(4,7-diphenyl-1,10-phenanthroline) ruthenium(II) bis(3-(trimethylsilyl)-1-propanesulfonate) (Ru(dpp)₃TMS₂) are incorporated into a single layer ethyl cellulose matrix. A second layer of black silicone rubber served as an optical isolation. The two indicators were simultaneously excited with a 460-nm LED, and a fast-gateable CCD camera was used as the detector. The time-gated imaging scheme enables the mapping of pCO₂ and pO₂ within one measurement, where images in three different time windows during and after a series of square-shaped excitation pulses are recorded. A numerical evaluation method for the resolution of the single parameter maps from these three overall images is described. The response of the sensor has been optimized for use in aquatic systems.     

Hydrogen bond interactions at the TiO2 surface: Their contribution to the pH dependent photo-catalytic degradation of p-nitrophenol

We have obtained pK_a values of p-nitrophenol–TiO₂ by measuring the adsorption equilibrium constants of p-nitrophenol (PNP) on the TiO₂ surface at different pH values. These values have been obtained from Langmuir isotherms and from a plot of 1/rate vs. 1/[PNP]_o obtained during TiO₂ catalyzed solar light photo-degradation of PNP. Two limit equilibrium constants are readily obtained depending on the solution pH: at pH 5 at which the TiO₂ surface is mainly positively charged and at pH 8 when it is negatively charged. With these and other adsorption equilibrium constants and the PNP pK_a value in solution, thermodynamic cycles are established in order to obtain the PNP pK_a when it is adsorbed on positively charged, neutral and negatively charged TiO₂ surfaces. From these pK_a values useful information on the PNP–TiO₂ interaction is readily obtained. For instance, the PNP nitro group interacts with the TiO₂ surface via a hydrogen bond, arising from the complex of water molecules with the Ti⁴⁺ ions on its surface. The weaker the hydrogen bond donor, the stronger the oxygen nitro group basicity. Therefore, pK_a changes on the phenolic hydroxyl group result from these interactions. Linear free energy correlations, maximum PNP adsorption capacity values (Q_L) and FTIR ATR, spectrum support this proposal. A k_obs vs. pH degradation profile of p-nitrophenol is also provided.     

Molecular electrochemistry of hydrofullerenes C70H36—46

Electrochemistry of a mixture of hydrofullerenes C₇₀H_36—46 composed of C₇₀H₃₆, C₇₀H₃₈, C₇₀H₄₄, and C₇₀H₄₆ (50, 20, 14, and 15%, respectively) was studied by cyclic voltammetry in THF and CH₂Cl₂ in the –43—–13 °C temperature range. Two cathodic peaks, namely, one-electron reversible (E° = –3.16 V (Fc^0/+), Fc is ferrocene) and irreversible (E _p = –3.37 V (Fc^0/+)) were observed for this mixture in THF. The irreversible broad oxidation peak (E _p = 1.22 V (Fc^0/+)) was observed in CH₂Cl₂. The reversible reduction peak (E° = –3.16 V) and irreversible oxidation peak (E _p = 1.22 V) were attributed to the most stable hydrofullerene C₇₀H₃₆. The irreversible reduction (E _p = –3.37 V) and oxidation (E _p = 1.22 V) peaks were attributed to hydrofullerenes C₇₀H_44—46 with a higher degree of hydrogenation. The values of an electrochemical gap, which is an analog of the energy gap (HOMO—LUMO), are 4.38 and 4.59 V for C₇₀H₃₆ and C₇₀H_44—46, respectively, and indicate that these hydrofullerenes are sufficiently hard molecules with low reactivity in redox reactions.     

Anab initio investigation of the inner shell excited states of the molecule Cl2

Restricted Hartree-Fock calculations of the Cl₂ molecule have been carried out to investigate the X-ray excited states below Cl 2p-electron ionization potential. Some inner shell excited states are shown to have a valence or a valence-Rydberg nature that results in a considerable intensity of the appropriate transitions in the X-ray absorption spectrum. A significant interaction among some electron configurations with a 2p vacancy is predicted.     

双配体CuFe@MOFs材料为前驱体的催化剂的组分调控对CO2加氢制C2+醇性能的影响

采用水热法制备了以对苯二甲酸和对氨基苯甲酸为配体的双配体Fe基MOFs材料(MIL-88B(Fe)),在浸渍一定量Cu物种后经氮气气氛焙烧得到活性组分均匀分散的CuFe基催化剂。通过改变2种配体的比例调控催化剂表面Fe活性物种的价态分布,并考察了其用于固定床反应器上CO_2加氢制C_(2+)醇的催化性能,结合X射线衍射(XRD)、H_2程序升温还原(H2-TPR)、N_2吸附-脱附、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)等表征结果发现,对苯二甲酸与对氨基苯甲酸物质的量之比为5∶2时,催化剂表面低价态铁原子占比为71.27%,催化剂展现最优的催化活性,CO_2转化率为8.80%,总醇选择性为31.52%,其中C_(2+)醇的物质的量分数达到94.70%。     

Ab initio calculations on NO2 and NO 2 − : Optimization of diffuse Gaussian exponents

Ab initio calculations of NO₂ and NO ₂ ⁻ , using a Dunning [4s3p] basis augmented by 1 component diffuses andp functions were carried out. The SCF energies of NO₂ and NO_2/− (ground states) as a function of O _s , O _p , N _s , and N _p diffuse function exponents are given and discussed. The curves show some unexpected features which make the optimization of the diffuse function exponents problematic. The SCF vertical electron detachment energy for NO ₂ ⁻ as a function of the diffuse O _s , O _p , N _s , and N _p exponents is then discussed. Except for the case of O _p , the detachment energy is essentially independent of the O _s , N _s , and N _p exponents. Finally, results of SCF and MCSCF/CI calculations of the electron affinity of NO₂ are given and compared with experiment. Work performed under the auspices of the Division of Basic Energy Sciences of the U.S. Department of Energy. By acceptance of this article, the publisher and/or recipient acknowledges the U.S. Government's right to retain a nonexclusive, royalty-free license in and to any copyright covering this paper.     

Isomeric organic ligand dominating polyoxometalate-based hybrid compounds: synthesis and as electrocatalysts and pH-sensitive probes

By introducing isomeric organic ligands into polyoxometalate (POM) systems, two new POM-based hybrid compounds, [Cu₆(m-pyttz)₂(H₂O)][HPMo₁₂O₄₀] (1) and [Ag₃(p-H₂pyttz)(p-Hpyttz)Cl][H₂PMo₁₂O₄₀]·6H₂O (2) (m-/p-H₂pyttz = 3-(pyrid-3/4-yl)-5(1H-1,2,4-triazol-3-yl)-1,2,4-triazolyl), have been hydrothermally synthesized and characterized. Single-crystal structural analysis shows the m-pyttz ligands link Cu^I ions to generate a two-dimensional layer with hanger-like rhombus, which is pillared by the PMo₁₂ anions in 1. Compound 2 exhibits a three-dimensional supramolecular framework, in which PMo₁₂ anions are building blocks facilitating the extension of the whole structure. The influence of the coordination modes of m-/p-H₂pyttz on the structures is discussed in detail. Furthermore, electrochemical properties of 1 and 2 have been studied and they display excellent electrocatalytic activities toward the reduction of nitrite and hydrogen peroxide and pH-dependent electrochemical behaviors.     

Benchmarking and validating algorithms that estimate p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> values of drugs based on their molecular structures

The REGDIA regression diagnostics algorithm in S-Plus is introduced in order to examine the accuracy of pK _a predictions made with four updated programs: PALLAS, MARVIN, ACD/pKa and SPARC. This report reviews the current status of computational tools for predicting the pK _a values of organic drug-like compounds. Outlier predicted pK _a values correspond to molecules that are poorly characterized by the pK _a prediction program concerned. The statistical detection of outliers can fail because of masking and swamping effects. The Williams graph was selected to give the most reliable detection of outliers. Six statistical characteristics (F _exp, R ², , MEP, AIC, and s(e) in pK _a units) of the results obtained when four selected pK _a prediction algorithms were applied to three datasets were examined. The highest values of F _exp, R ², , the lowest values of MEP and s(e), and the most negative AIC were found using the ACD/pK _a algorithm for pK _a prediction, so this algorithm achieves the best predictive power and the most accurate results. The proposed accuracy test performed by the REGDIA program can also be applied to test the accuracy of other predicted values, such as log P, log D, aqueous solubility or certain physicochemical properties of drug molecules.     

Steam pretreatment of acid-sprayed and acid-soaked barley straw for production of ethanol

Barley is an abundant crop in Europe, which makes its straw residues an interesting cellulose source for ethanol production. Steam pretreatment of the straw followed by enzymatic hydrolysis converts the cellulose to fermentable sugars. Prior to pretreatment the material is impregnated with a catalyst, for example, H₂SO₄, to enhance enzymatic digestibility of the pretreated straw. Different impregnation techniques can be applied. In this study, soaking and spraying were investigated and compared at the same pretreatment condition in terms of overall yield of glucose and xylose. The overall yield includes the soluble sugars in the liquid from pretreatment, including soluble oligomers, and monomer sugars obtained in the enzymatic hydrolysis. The yields obtained differed for the impregnation techniques. Acid-soaked barley straw gave the highest overall yield of glucose, regardless of impregnation time (10 or 30 min) or acid concentration (0.2 or 1.0 wt%). For xylose, soaking gave the highest overall yield at 0.2 wt% H₂SO₄. An increase in acid concentration resulted in a decrease in xylose yield for both acid-soaked and acid-sprayed barley straw. Optimization of the pretreatment conditions for acid-sprayed barley straw was performed to obtain yields using spraying that were as high as those with soaking. For acid-sprayed barley straw the optimum pretreatment condition for glucose, 1.0 wt% H₂SO₄ and 220°C for 5 min, gave an overall glucose yield of 92% of theoretical based on the composition of the raw material. Pretreatment with 0.2wt% H₂SO₄ at 190°C for 5 min resulted in the highest overall xylose yield, 67% of theoretical based on the composition of the raw material.     

Hydrothermal synthesis of mesostructured nanocrystalline TiO2 in an ionic liquid–water mixture and its photocatalytic performance

Anatase mesostructured TiO₂ nanocrystalline was prepared in a mixture of 1-butyl-3-methyl-imidazolium tetrafluoroborate (BMIM⁺BF₄⁻) ionic liquid and water by a low temperature hydrothermal method. The obtained materials were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and N₂ adsorption–desorption. The existence of BMIM⁺BF₄⁻ enhanced the polycondensation and crystallization rate, which encouraged the formation of anatase crystal. The TiO₂ particles were thermally very stable and thus resistant to anatase-rutile phase transformation during calcination at high temperatures. The anatase TiO₂ showed high photocatalytic activity in the degradation of p-chlorophenol than that of the commercially available TiO₂, Degussa P25. After 2 h reaction under the UV-irradiation of 250 W, the removing rate of p-chlorophenol was up to 96.3%.     

Competition among aromatic guests for the host tetrakis(4-methylpyridine)nickel(II) isothiocyanate and a basis for the observed selectivity

In continuing attempts to determine the basis for the selectivity shown by the host Ni(4-mepy)₄(NCS)₂ (1) toward aromatic guests, distribution data between solid and liquid phases are reported for seven ternary systems at room temperature. These consist of1,p-xylene, and each of the following:p-bromotoluene,p-chlorotoluene,p-fluorotoluene,p-dichlorobenzene, benzene, and 4-methylpyridine, as well as the system1-p-chlorotoluene-p-dichlorobenzene. The results, as well as those for five systems already published, have been reviewed and a hierarchy of selectivity developed. After correcting the observed selectivity for inequality of guest vapour pressures the order of decreasing preference is found to bep-bromotoluene >p-dichlorobenzene >p-chlorotoluene > deuterated and protiatedp-xylenes > ethylbenzene > 4-methylpyridine >p-fluorotoluene > toluene > benzene. With the exception of 4-methylpyridine, this is the same as the order of decreasing van der Waals length of the guest molecule and, where known, the order of enthalpy of inclusion. Although longer guest molecules and those with higher vapour pressures are favoured in selectivity, guests with longer molecules are likely to have lower vapour pressures. The activity coefficients of the included guests are calculated assuming that the liquid phases follow Raoult's law.Portions of this paper were presented at the Second and Fourth International Symposia on Clathrate Compounds and Molecular Inclusion Phenomena held in Parma, Italy, 1982 and Lancaster, England, 1986.