Radiation-induced polymerization of glass-forming systems. II. Effect of temperature on the polymerization rate at higher conversion

The effect of temperature and conversion on the polymerization rate at higher conversion was investigated with regard to the γ-ray-induced polymerization of hydroxyethyl methacrylate (HEMA) and glycidyl methacrylate (GMA) in the supercooled phase. The polymerization rate changed from acceleration to depression at various conversions, depending on the polymerization temperature. It was found that T_v at which the viscosity of the system became ca. 10³ cpoise influenced the shape of the polymerization time–conversion curve. The experimentally obtained conversion reflection point in the polymerization time–conversion curve agreed with the conversion where the polymerization temperature is the same as the calculated T_v of the system. When the polymerization temperature was lower than T_v of the monomer, no acceleration of the polymerization occurred. When the polymerization temperature was higher than T_v of the polymer, no depression of the polymerization rate was observed. The effect of temperature on the saturated conversion (final conversion) was also examined in terms of T_g of the polymerization system. The experimentally obtained saturated conversion agreed with the conversion where the polymerization temperature is the same as the calculated T_g of the system.     

Radiation-induced polymerization of glass-forming systems. V. Initial polymerization rate in binary glass-forming systems

The radiation-induced polymerization of binary systems consisting of glass-forming monomer and glass-forming solvent in supercooled phase was studied. The initial polymerization rates were markedly affected by T_g (glass transition temperature) and T_v of the system (30–50°C higher than T_g), which turned to be functions of the composition. The composition and temperature dependence of initial polymerization rate in binary glass-forming systems were much affected by homogeneity of the polymerization system and the T_g of the glass-forming solvent. The composition and temperature dependences in the glycidyl methacrylate–triacetin system as a typical homogeneous polymerization system were studied in detail, and the polymerizations of hydroxyethyl methacrylate–triacetin and hydroxyethyl methacrylate–isoamyl acetate systems were studied for the heterogeneous polymerization systems; the former illustrates the combination of lower T_g monomer and higher T_g solvent and the latter typifies a system consisting of higher T_g monomer and lower T_g solvent. All experimental results for the composition and temperature dependence of initial polymerization rate in binary glass-forming systems could be explained by considering the product of the effect of the physical effect relating to T_v and T_g of the system and the effect of composition in normal solution polymerization at higher temperature, which was also the product of a dilution effect and a chemical or physical acceleration effect.     

Radiation-induced polymerization of glass-forming systems. I. Effect of temperature on the initial polymerization rate

Radiation-induced polymerization of hydroxyethyl methacrylate (HEMA) and glycidyl methacrylate (GMA) was investigated. HEMA and GMA formed a stable supercooled or glassy phase by themselves at low temperatures. It was found that the initial polymerization rate was proportional to ca.0.5 power of the dose rate in the region of relatively high temperatures and the dose rate exponent changed sharply to 1.0 at a temperature T_r, at which the viscosity of monomeric systems reached ca. 10³ cP as the temperature decreased. Moreover, a maximum in the polymerization rate–temperature curve occurred at T_v. It was deduced that the polymerization mechanism changed from the stationary to the nonstationary at T_v. The temperature at which a minimum of the polymerization rate occurred could be calculated kinetically considering the viscosity dependency of termination rate, and it agreed well with that obtained experimentally. It was deduced that occurrence of the minimum polymerization rate above T_v was attributable mainly to the decrease in termination rate due to diffusion control.     

Radiation-induced polymerization of glass-forming systems. IV. Effect of the homogeneity of polymerization phase and polymer concentration on temperature dependence of initial polymerization rate

The effect of homogeneity of polymerization phase and monomer concentration on the temperature dependence of initial polymerization rate was studied in the radiation-induced radical polymerization of binary systems consisting of glass-forming monomer and solvent. In the polymerization of a completely homogeneous system such as HEMA–propylene glycol, a maximum and a minimum in polymerization rates as a function of temperature, characteristic of the polymerization in glass-forming systems, were observed for all monomer concentrations. However, in the heterogeneous polymerization systems such as HEMA–triacetin and HEMA–isoamyl acetate, maximum and minimum rates were observed in monomer-rich compositions but not at low monomer concentrations. Furthermore, in the HEMA–dioctyl phthalate polymerization system, which is extremely heterogeneous, no maximum and minimum rates were observed at any monomer concentration. The effect of conversion on the temperature dependence of polymerization rate in homogeneous bulk polymerization of HEMA and GMA was investigated. Maximum and minimum rates were observed clearly in conversions less than 10% in the case of HEMA and less than 50% in the case of GMA, but the maximum and minimum changed to a mere inflection in the curve at higher conversions. A similar effect of polymer concentration on the temperature dependence of polymerization rate in the GMA–poly(methyl methacrylate) system were also observed. It is deduced that the change in temperature dependence of polymerization rate is attributed to the decrease in contribution of mutual termination reaction of growing chain radicals to the polymerization rate.     

Radiation-induced solid-state polymerization in binary systems. IV. Solid-state polymerization in the glassy phase

The radiation-induced polymerization of glass-forming systems containing monomers has been investigated. It was found that irradiation below the second-order transition temperature T_g of the systems causes no in-source polymerization but causes a rapid postpolymerization on warming above the T_g after initial irradiation below the T_g. The post-polymerization was followed by differential thermal analysis and ESR spectra. It is caused above the T_g by the release of peroxy radicals trapped below the T_g, and its rate is proportional to the irradiation dose to some extent, often is explosively high, and brings about a remarkably large temperature rise by accumulation of polymerization heat. Irradiation above the T_g causes rapid in-source polymerization which is accelerated by the high viscosity of the monomeric system between T_g and T_s (WLF temperature) compared to crystal or ordinary solution polymerization. The temperature dependence of the in-source polymerization of glassy systems shows a peak between the T_g and T_s which may be the result of competing effects of the rate increase by the decreased termination near T_s and the rate decrease by the decreased propagation caused by the diffusion prevented near the T_g. The degree of polymerization was also investigated. The temperature dependence of the degree of polymerization of the polymers obtained by in-source polymerization shows a peak similar to that of the temperature dependence of conversion. Unusually large values of the Huggins constant k' are noted between T_g and T_s. The degree of polymerization of the polymer obtained by post-polymerized increases with the increase of irradiation dose and the polymerization rate; this may be the result of decreased chain transfer to nonpolymerizable components.     

Radiation-induced polymerization of glass-forming systems. VII. Polymerization in supercooled state under high pressure

Radiation-induced polymerization of glass-forming monomers such as 2-hydroxyethyl methacrylate and glycidyl methacrylate under high pressure was studied. The glass transition temperature of these monomers was heightened by increased pressure. The temperature dependence of polymerizability showed a characteristic relation; similar to those in supercooled-phase polymerization under normal pressure, that had a maximum at T_v which shifted to higher levels of temperature as well as to T_g under high pressure. Polymerizability in the supercooled state also increased under increased pressure.     

Simultaneous kinetic and microdielectric studies of some epoxy–amine systems

Three reactive epoxy–amine systems based on diglycidyl ether of bisphenol A (DGEBA) with 4,4′-diaminodiphenylsulfone (DDS), 4,4′-methylenebis [3-chloro 2,6-diethylaniline] (MCDEA), and 4,4′-methylenebis [2,6-diethylaniline] (MDEA), were studied during isothermal curings at 140 and 160°C. The simultaneous kinetic and dielectric studies allow to express conductivity, σ, in terms of conversion, x, and of glass transition temperature, T_g. The conductivity, σ₀, of the initial monomer mixture and, σ_∞ of the fully cured network are measured. It is found that:

• The glass transition temperature, T_g, versus conversion, x, curves follows the equation of Di Benedetto modified by Pascault and Williams
• There exists a linear relation between log σ/log σ₀ and T_g.

So, it is possible to predict both kinetic and dielectric behaviors of these epoxy-amine systems by the knowledge of T_g0, ΔC_p0, and σ₀, respectively, glass transition temperature, heat capacity, and conductivity of initial monomer mixture, T_g∞ and ΔC_p∞, and σ_∞, respectively, glass transition temperature and heat capacity and conductivity of fully cured network. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2911–2921, 1998     

Glass‐Transition Temperature as a Function of Conversion in Hyperbranched Polymers Obtained by Self‐Condensing Vinyl Polymerization

Chain‐end free volume theory is extended for studying the glass‐transition temperature (T_g) as a function of conversion in hyperbranched polymers. T_g is found to have a non‐linear inverse relationship to the molecular weight for polymers obtained by self‐condensing vinyl polymerization (SCVP). During the monomer conversion process, T_g decreases with the increase in molecular weight (P) in the low conversion range, then levels off in the high conversion range.     

Glass transition temperature of allyl methacrylate‐n‐butyl acrylate gradient copolymers in dependence on chemical composition and molecular weight

Glass transition temperatures (T_gs) of P(AMA‐co‐BA) copolymers and the corresponding homopolymers, where AMA is allyl methacrylate and BA is n‐butyl acrylate, obtained by means of atom transfer radical polymerization were measured using differential scanning calorimetry. Because of the (pseudoliving) nature of this polymerization technique an increase in molecular weight (MW) is produced as the reaction progresses, which gives rise to an increase in T_gs. This increment can be adequately described by the Fox–Flory's equation in both homopolymers. However, in the spontaneous gradient copolymers of P(AMA‐co‐BA), the expected increase in T_g with the augment of the monomer conversion is compensated by the enrichment of BA as the polymerization reaction progresses. These opposite effects with respect to the T_g values almost balance each other, and therefore no significant influence on the MW or on conversion is found. This fact establishes that T_gs can be used to describe the profile of these gradient copolymers, and can be theoretically determined because of its dependence on the molar fraction in the copolymer. From this dependence on chemical composition along with the experimental behavior, a prediction of the T_g variation with the MW was performed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1845–1855, 2007     

The effect of sodium methacrylate on the soapless emulsion copolymerization of methyl methacrylate and n-butyl acrylate

The soapless emulsion polymerization of methyl methacrylate (MMA) and n-butyl acrylate (BA) containing various concentrations of sodium methacrylate (NaMA) or methacrylic acid (MMA) is studied. The hydrosoluble yields in final latexes are not larger than 1.3–5%, depending on the concentration of NaMA used. Below 25% conversion, the change of conversion with reaction time follows the square rule and the particle size is proportional to the 2/3 power of time. Above 25% conversion, serious gel effect occurs, and the conversion follows the seventh power on time and the growth of particle diameter obeys the 2.5 power on time. The multiple glass transition (T_g) occur below 20% conversion, where monomer droplets exist. NaMA added induces more T_gs. The effect of molecular weight of the copolymers obtained on T_g (even the molecular weight distributions were shown to be shouldertype bimodal) is estimated to be insignificant. Thus, the heterogeneity of copolymer compositions for multiple T_gs is ascribed to be caused from neither the molecular weight heterogeneity nor the shifts in compositions due to the difference of the monomer reactivity ratios. Referring to the results mentioned, we assume the sublayer surrounding the particle, rich with SO₄^? and COO^? groups, and the concentration gradients of monomers in particles to illustrate particle morphology. In addition, the relatively hydrophilic sublayer is proposed to be closely relative with the occurrence of the composition heterogeneity in particles.     

Synthesis and characterization of polytulipalin‐g‐polylactide copolymers

Graft copolymers of poly(tulipalin A) (PT) and poly(DL‐lactide) (PDLLA) (PT‐g‐PDLLA) having various graft lengths and ratios were synthesized by free‐radical copolymerization of α‐methylene‐γ‐butyrolactone (MBL) and PDLLA macromonomers (HEMA‐PDLLA) terminated by 2‐hydroxyethyl methacrylate (HEMA)‐terminated. HEMA‐PDLLA were synthesized by ring opening polymerization (ROP) of DL‐lactide in the presence of HEMA. Both HEMA‐PDLLA and the copolymers were characterized by NMR spectroscopy and gel permeation chromatography (GPC). The thermal properties of the graft copolymers were found to depend on the graft length and the ratio. The copolymers consisting of PDLLA side chains of M_n = 500 Da showed a single T_g between T_gs of the two component polymers, suggesting a miscible state of PT and PDLLA. In contrast, the copolymers consisting of PDLLA side chains of M_n = 1100, 2000, and 7000 Da showed two isolated T_g, suggesting two segregated domains. The AFM phase images of the copolymers supported the single and phase‐separated morphologies for the former and latter systems, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Design and synthesis of highly photopolymerizable styrenyl compounds in solid‐state photoinitiated polymerization

We designed a new type of styrenyl compound applicable to conventional photopolymerization systems, aiming at the production of polymers with improved mechanical properties, resistance to chemicals, and elevated glass‐transition temperatures (T_g's). A series of styrenyl monomers bearing 2,5‐dithio‐1,3,4‐thiadiazole groups were prepared, and their reactivity was studied in solid‐state photopolymerization initiated by 2‐(4′‐methoxystyryl)‐4,6‐bis(trichloromethyl)‐1,3,5‐triazine. These monomers exhibited much higher polymerization rates than usual, and the final conversion nearly reached completion, despite the relatively high T_g of the solid‐state photopolymerization system. Even at temperatures below T_g, the polymerization proceeded without a ceiling phenomenon. These features were explained by intermolecular interactions between the monomers that induced monomer alignments effective for solid‐state polymerization, large excess free volumes arising from rotation around the methylthio groups, and intramatrix radical migration leading to encounters with the remaining monomers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3227–3242, 2003     

Gamma-Irradiated Gelatin-Based Films Modified by HEMA for Medical Application

The present article describes the synthesis and characterization of bi-component polymer systems based on gelatin films incorporated with 2-hydroxyethyl methacrylate (HEMA) monomer, developed for medical application. Gelatin films were prepared by the addition of HEMA of different concentrations (0–30 wt.%) and irradiated with various radiation doses (0–5 kGy). Tensile strength and tear strength of the irradiated gelatin films were found to increase with increasing HEMA up to 20 wt.% as well as radiation doses (1 kGy) as optimized. The maximum tensile and tear strengths of irradiated gelatin films with HEMA were found to be 79.1 MPa and 83.2 N/mm, respectively, at the optimum conditions, and these values were about double that of a reference film prepared without additives. In addition, morphological analysis was done by scanning electron microscopy (SEM) and showed how HEMA cemented and was covered with gelatin in the blend. Thermomechanical analysis was carried out to investigate the shifting of glass transition temperature (T_g) towards higher temperature due to HEMA addition, and the effect of this film was tested on the human body in order to determine whether it can be applied for medical purposes.     

Polar,functionalized diene‐based material. III. Free‐radical polymerization of 2‐[(N,N‐dialkylamino)methyl]‐1,3‐butadienes

The bulk free‐radical polymerization of 2‐[(N,N‐dialkylamino)methyl]‐1,3‐butadiene with methyl, ethyl, and n‐propyl substituents was studied. The monomers were synthesized via substitution reactions of 2‐bromomethyl‐1,3‐butadiene with the corresponding dialkylamines. For each monomer the effects of the polymerization initiator, initiator concentration, and reaction temperature on the final polymer structure, molecular weight, and glass‐transition temperature (T_g) were examined. Using 2,2′‐azobisisobutyronitrile as the initiator at 75 °C, the resulting polymers displayed a majority of 1,4 microstructures. As the temperature was increased to 100 and 125 °C using t‐butylperacetate and t‐butylhydroperoxide, the percentage of the 3,4 microstructure increased. Differential scanning calorimetry indicated that all of the T_g values were lower than room temperature. The T_g values were higher when the majority of the polymer structure was 1,4 and decreased as the percentage of the 3,4 microstructure increased. The Diels–Alder side products found in the polymer samples were characterized using NMR and gas chromatography‐mass spectrometry methods. The polymerization temperature and initiator concentration were identified as the key factors that influenced the Diels–Alder dimer yield. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4070–4080, 2000     

PMMA/organomodified montmorillonite nanocomposites prepared by in situ bulk polymerization

Kinetics of the in situ bulk polymerization of methyl methacrylate in the presence of organomodified montmorillonite (MMT) was investigated using differential scanning calorimetry (DSC) and gravimetrically. Different amount and types of MMT under the trade names Cloisite were employed. Using DSC, the amount of heat released versus time, under isothermal conditions, was recorded, and eventually, the time evolution of polymerization rate and monomer conversion was calculated. Results on the variation of monomer conversion with reaction time were in good agreement to corresponding from the gravimetric measurements. The nanocomposites prepared were characterized with WAXD, TEM and FTIR, and their glass transition temperature, T _g, was measured with DSC. Depending on the added amount of nano-MMT, either exfoliated or intercalated structures were obtained. An enhancement of the polymerization rate with the presence of the nanoparticles was observed especially in the gel effect region. This was accompanied by a higher T _g and average molecular weight, as measured by GPC, of all nanocomposites compared to neat PMMA.     

Effect of cyclobutane carbonitrile rings on the glass transition temperature of vinyl copolymers

A wide compositional range of copolymers of 1-cyclobutene carbonitrile (CBCN) and 1-bicyclobutance carbonitrile (BBCN) with common vinyl monomers was prepared in order to study systematically the effect of cyclobutane carbonitrile ring incorporation on the glass transition temperature (T_g). In general, the T_g's of the copolymers are increased in proportion to the weight percent of the small-ring monomer incorporated, but the 1,2-mode of incorporation raises T_g more than the 1,3-mode. Attempts were made to correlate data with quantitative T_g–composition relationships (Fox–Johnston equations). Prediction for nitrile homopolymer T_g's are compared with literature values.     

Glass transition temperature for epoxy-diamine networks

The glass transition temperature of systems based on epoxy resin and a number of diamines has been determined by using a torsion pendulum. An equation relating composition and crosslink density with the glass transition temperature has been established which gives reasonable predictions of the glass transition temperatures for systems based on aliphatic or aromatic amines and methylated amines and for systems containing a monofunctional epoxy diluent. The equation may be used to predict T_g for systems with non-stoichiometric quantities of curing agent and blends of amines. Deviation of the predicted and observed values for T_g is interpreted in terms of differences between definitions of T_g used by other workers and, also the occurrence of competing side reactions during polymerization which lead to additional crosslinks.     

Kinetics and mechanism of emulsifier-free emulsion polymerization. III. Styrene/nonionic comonomer (2-hydroxyethyl methacrylate) system

The emulsifier-free emulsion polymerizations of styrene in the presence of about 0.33–2.7% (relative to styrene) of the water soluble comonomer, 2-hydroxyethyl methacrylate (HEMA), and of the initiator, potassium persulfate (KPS), were carried out. It was found that KPS plays a predominant role in the particle nucleation process, since the number density of polymer particles (N_p) was dependent on the 0.97-power of [KPS]. The nucleation ability of HEMA was weak, since N_p was dependent only on the 0.17-power of [HEMA]. The particle nucleation stage ceased quite early before 1% conversion, leading to nearly monodispersed polymer particles. The nucleation is suggested to be via the homogeneous nucleation mechanism. The particles grow via the core-shell structure mechanism (shell region polymerization), since the particle size is rather large—from 1500 to 6000 Å. The amount of HEMA can affect the shell thickness and physical properties of the shell, such as the monomer swelling capacity and monomer diffusion rate.     

Syntheses and properties of poly(diethyl vinylphosphonate) initiated by lanthanide tris(borohydride) complexes: Polymerization controllability and mechanism

Polymerization of diethyl vinylphosphonate (DEVP) is achieved by using lanthanide tris(borohydride) complexes, Ln(BH₄)₃(THF)₃ (Ln = Y, La, Nd, Sm, Gd, Dy, Lu) as an initiator. The characteristics and mechanism of polymerization as well as the properties of the resulting poly(diethyl vinylphophonate)s (PDEVPs) are studied. The effects of the lanthanide elements, the molar ratios of monomer to initiator ([M]/[ln]), reaction temperature and time on polymerization have been investigated in detail. The optimized polymerization conditions are 40 °C, 1 h in bulk with [M]/[ln] = 300. The kinetic study indicates that the polymerization of DEVP undergoes a controlled manner as the molecular weights (MWs) of PDEVPs increase with monomer conversion linearly maintaining moderate MW distribution (1.7–1.9). Additionally, a coordination anionic polymerization mechanism is proved by end‐group analysis with ESI mass and ¹H NMR spectroscopy. The obtained PDEVPs have low glass transition temperature (T_g = ?62 °C) and high thermal decomposition temperature (T_d > 300 °C) determined by differential scanning calorimetry and thermogravimetric analysis respectively. The thermosensitive behavior of PDEVP is characterized by evaluating the lower critical solution temperature of PDEVP in water by ultraviolet transmittance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2409–2415     

Radical and radiation-induced grafting of some synthetic high polymers within the temperature range of their glass transition

The temperature dependence of radiation-induced grafting onto poly(ethylene terephthalate), polyamides, polyacrylonitrile, and polypropylene has been investigated for several monomers. In all cases a maximum grafting yield is obtained when the reaction is performed in the temperature range of the glass transition T_g of the polymer used. This maximum yield does not only appear with radiation-induced simultaneous grafting. It also appears when the graft polymerization is induced by pre-irradiation or even by thermal decomposition of organic peroxides. It is assumed that the pronounced maximum of the reactivity at T_g is obtained because in the glassy state below T_g the radicals formed cannot react due to a reduced diffusion of the monomer, whereas above T_g the number of radicals available for polymerization will be reduced with increasing temperature.