Effective Promotion of Beirut Reaction by β-Cyclodextrin in Water

A mild and highly efficient, environmentally friendly procedure has been developed for the conversion from benzofurazan-N-oxides to quinoxaline di-N-oxides in the presence of β-cyclodextrin in water at room temperature with excellent yields. The application of cyclodextrin precludes the use of organic solvent, and the catalyst can be recovered and reused in subsequent reactions with the same catalytic activity. Herein, the Beirut reaction is carried out in the medium of water for the first time. The reaction mechanism was proposed based on the inclusion complexation of β-cyclodextrin with benzofurazan-N-oxides which was confirmed by ¹H NMR, ultraviolet/visible spectrum, and infrared spectroscopy.      

Stabilization of Water‐Soluble Antioxidant in Water‐in‐Oil‐in‐Water Double Emulsions

Abstract

In this study, we are introducing a method that can effectively stabilize antioxidants in water‐in‐oil‐in‐water (W/O/W) double emulsions. Preliminarily, stable W/O/W double emulsions were produced by manipulating the characteristics of internal aqueous phase via two‐stage emulsification, resulting consequently in the formation of fine internal water droplets in the dispersed oil droplets. From conductivity measurements that can determine the elution amount of internal aqueous phase, it was confirmed that the double emulsion stability could be improved by treating the internal aqueous phase with a hydroxypropyl‐beta‐cyclodextrin. In this study, kojic acid, 5‐hydroxy‐2‐(hydroxymethyl)‐4‐pyrone was selected as a model antioxidant. The stabilization of kojic acid was attempted by locating it in the internal water droplets of the stable W/O/W double emulsions. The stability of kojic acid in the double emulsion system could be maintained at 90% for 10 weeks at high temperature. We believe that these stable W/O/W double emulsions could be used meaningfully as a carrier for many unstable antioxidants.     

Synthesis of 1,8-Dioxo-octahydroxanthene Derivatives Catalyzed by p-Dodecylbenezenesulfonic Acid in Water

With the increasing concerns of the environment, more and more chemists are devoted to the research of the "green synthesis" which means that the reagent, solvent and catalyst are environmentally friendly in the organic chemical reactions. The importance of aqueous reaction is now generally recognized, and development of carbon-carbon bond-forming reactions that can be carried out in aqueous media is now one of the most challenging topics in organic synthesis.[1]Herein, we report a clean synthesis of 3,3,6,6-tetramethyl-9-aryl-1,8-dioxo-octahydroxanthene derivatives from aromatic aldehyde and 5,5-dimethyl-1,3-cyclohexadione using p-dodecylbenezenesulfonic acid (DBSA) as the catalyst in water.This method provides several advantages such as high yield, simple work-up procedure and environmental friendliness and water was chosen as a green solvent. All the products were characterized by m.p., 1H NMR, IR and elemental analyses.     

Replacement of Carbohydrate Sulfates by Sugar C‐Sulfonic Acid Derivatives

Abstract

3′‐Substituted p‐methoxyphenyl β‐lactosides and one of their 3′‐epimer were synthesized. The common feature of these compounds is the presence of a strong negative charge at position C‐3′ in the form of sulfonic acid moieties. The 3′,4′‐diol derivative of p‐methoxyphenyl lactoside was also glycosylated with the thioglycoside of the sulfoulosonic acid. The two‐regioisomeric trisaccharides were isolated but their deprotection failed. The aim of the present study was to find carbohydrate ligand(s), which can inhibit the adhesion between Helicobacter pylori and the gastrointestinal epithelial cells.     

Conversion of d‐Galactose to d‐threo‐Hexos‐2,3‐diulose by Fungal Pyranose Oxidase

Pyranose oxidase (pyranose:O₂ 2‐oxidoreductase, EC 1.1.3.10) purified from mycelia of the basidiomycete fungi Trametes versicolor and Oudemansiella mucida catalyzed oxidation of d‐galactose successively at C‐2 and C‐3 to d‐threo‐hexos‐2,3‐diulose (2,3‐dehydro‐d‐galactose, 2,3‐diketo‐d‐galactose) in the yields up to 80%. The sites of oxidation were deduced from structures of the N,N‐diphenylhydrazone derivatives of the reaction products. Under the reaction conditions used, the diulose was susceptible to non‐enzymatic oxidative decarboxylation to d‐threo‐pentos‐2‐ulose (2‐dehydro‐d‐xylose, 2‐keto‐d‐xylose) in yields of 5–10%.     

Synthesis of 3‐Aryl‐2‐benzoylbenzofuran Derivatives using Manganese(III) Acetate–Mediated Addition of Dimedon to Chalcone Derivatives

3‐Aryl‐2‐benzoylbenzofurans were synthesized by the reaction of α‐carboradical produced from dimedon by oxidizing with manganese(III) acetate in acetic acid and the chalcone derivatives.     

Factors Affecting the Droplet Size of Water‐in‐Oil Emulsions (W/O) and the Oil Globule Size in Water‐in‐Oil‐in‐Water Emulsions (W/O/W)

Multiple emulsions of the W₁/O/W₂ type are promising tools for encapsulating bioactive ingredients in the inner aqueous droplets. It is necessary, however, to control the factors influencing their encapsulation efficiency. One important factor is the particle size because it determines the surface area available for mass transport. Because of the coexistence of water and oil droplets in multiple emulsions, there are numerous factors that have an impact on particle size, for example, oil phase composition, interfacial properties, and viscosity of the phases. The purpose of this study was to systematically investigate the effect of these factors on particle sizes in multiple emulsions.     

Kinetics of the Oxidation of Phenylhydrazine by [Fe(CN)6]3− in Water‐in‐Oil Microemulsions

The oxidation reaction of phenyl hydrazine (Phh) by hexacyanoferrate ([Fe(CN)₆]^3?) has been studied in water‐in‐oil (w/o) microemulsion media. The kinetic profile of the reaction was investigated as a function of [Phh], droplet size, and droplet concentration. Comparison of the kinetic profiles of the reaction in microemulsion, water‐urea, and water‐AOT‐urea media indicates that the kinetic profile of the reaction in microemulsion shows a behavior similar to that of the reaction in water‐AOT‐urea medium at 4 M urea. An initial increase and then a decrease in k_obs is observed with increasing molar ratio, W_o(=[H₂O]/[AOT]) at constant [AOT] (=0.4 M), whereas k_obs decreases upon increasing the AOT concentration at constant molar ratio.     

Three‐Component,One‐Pot Synthesis of Pyrido[2,3‐d]pyrimidine Derivatives Catalyzed by KF‐alumina

Abstract

A series of pyrido[2,3‐d]pyrimidine derivatives were synthesized by the three‐component reaction of arylaldehyde, cyanoacetate, and 4‐amino‐2,6‐dihydroxylpyrimidine in ethyl alcohol at 80°C catalyzed by KF‐Al₂O₃. It was interesting that further aromatization took place automatically. Compared with other synthetic methods, this new method has the advantage of easier workup, milder reaction conditions, and good yields.     

Synthesis of Substituted 1‐\C\‐Phenyl‐D‐Tetritols and 1‐C‐(1H‐Pyrazol‐4‐yl)‐D‐tetritols by Ring Transformation of 2‐Formylglycals

Abstract

2‐Formylglycals 1a,b reacted with dialkyl 3‐oxoglutarates in the presence of base to furnish the 5‐[(1R,2R(S),3R)‐1,2,4‐tris(benzyloxy)‐3‐hydroxy‐butyl]‐2‐hydroxy‐isophthalic acid dialkyl esters 2a–d. Treatment of 1a,b with hydrazine derivatives afforded the substituted 1,2,4‐tri‐O‐benzyl‐1C‐(1H‐pyrazol‐4‐yl)‐D‐tetritols 5a–d. Deprotection of 5a,b was achieved with Pd/H₂ to yield the 1C‐(1‐methyl‐1H‐pyrazol‐4‐yl)‐D‐tetritols 6a,b.     

Three‐Component One‐Pot Synthesis of 1,4‐Dihydropyrano[2,3‐c]pyrazole Derivatives in Aqueous Media

Abstract

6‐Amino‐5‐cyano‐4‐aryl‐1,4‐dihydropyrano[2,3‐c]pyrazoles were synthesized by three‐component reaction of aromatic aldehydes, malononitrile, and 3‐methyl‐1‐phenyl‐2‐pyrazolin‐5‐one using triethylbenzylammonium chloride (TEBA) as catalyst in aqueous media. The reaction has the advantages of good yield, less pollution, ease of separation, and of being environment friendly.     

Effective Utilization of Carbohydrate in Corncob to Synthesize Furfuralcohol by Chemical–Enzymatic Catalysis in Toluene–Water Media

In this study, carbohydrates (cellulose plus hemicellulose) in corncob were effectively converted furfuralcohol (FOL) via chemical–enzymatic catalysis in a one-pot manner. After corncob (2.5 g, dry weight) was pretreated with 0.5 wt% oxalic acid, the obtained corncob-derived xylose (19.8 g/L xylose) could be converted to furfural at 60.1% yield with solid acid catalyst SO₄ ^2?/SnO₂-attapulgite (3.6 wt% catalyst loading) in the water–toluene (3:1, v/v) at 170 °C for 20 min. Moreover, the oxalic acid-pretreated corncob residue (1.152 g, dry weight) was enzymatically hydrolyzed to 0.902 g glucose and 0.202 g arabinose. Using the corncob-derived glucose (1.0 mM glucose/mM furfural) as cosubstrate, the furfural liquor (48.3 mM furfural) was successfully biotransformed to FOL by recombinant Escherichia coli CCZU-A13 cells harboring an NADH-dependent reductase (SsCR) in the water-toluene (4:1, v/v) under the optimum conditions (50 mM PEG-6000, 0.2 mM Zn²⁺, 0.1 g wet cells/mL, 30 °C, pH 6.5). After the bioreduction for 2 h, FAL was completely converted to FOL. The FOL yield was obtained at 0.11 g FOL/g corncob. Clearly, this one-pot synthesis strategy shows high potential application for the effective synthesis of FOL.     

Studies of Kinetics of Coalescence of Water‐in‐Furrial Crude Oil Emulsions by Confocal Microscopy

The kinetic of coalescence of water in Furrial crude oil emulsions (W/O) during the initial stage of demulsification process is showed through of high‐resolution image micrographics by using a confocal microscope. Furrial crude oil from Monagas state is a crude oil extra heavy with severe flocculation/aggregation problems. The kinetic of the initial stage in the coalescence process is critical and of great importance in the definition of the foreword behavior. This information allowed us to characterize the demulsification rate process in a Furrial crude oil. Total W/O emulsion separation was achieved about of 2 hours at 80ºC. The initial fast coalescence is characterized by a short binary coalescence time, which is followed by a large binary coalescence time. Our results demonstrate that the initial coalescence rate determinate the time necessary to achieve a total separation.     

Three‐Component,One‐Pot Synthesis of Pyrazolo[3,4‐b]pyridine Derivatives in Aqueous Media

6‐Amino‐4‐aryl‐5‐cyanopyrazolo[3,4‐b]pyridines were synthesized by a three‐component reaction of aromatic aldehydes, malononitrile, and 5‐amino‐3‐methyl‐1‐phenylpyrazole using sodium 1‐dodecanesulfonic (SDS) as catalyst in aqueous media. The reaction has the advantages of good yields, less pollution, ease of separation, and environmental friendliness.     

Application of Organolithium and Related Reagents in Synthesis,Part 31: Effective Conversion of 3‐Arylphthalides into 2‐(1‐Aryl‐3‐oxo‐4‐alkoxycarbonyl‐butyl)benzoic Acids

A convenient three‐step protocol preparation of the ortho‐alkylated (long‐chain substituent with terminal methylcarbonyl or acetoacetate moiety) aromatic carboxylic acids 15 or 16 from benzoic acids anilides 10 was developed, which exploited the reductive alkylation of phthalides 13 with dimethyl‐6‐methylene‐4‐(trimethoxysiloxy)‐1,3‐diox‐4‐ene (9) as a key step.     

Interfacial and Thermodynamic Properties of Formation of Water‐in‐Oil Microemulsions with Surfactants (SDS and CTAB) and Cosurfactants (n‐Alkanols C5–C9)

The interfacial and thermodynamic properties of water‐in‐oil microemulsion systems consisting of water, isopropyl myristate, n‐alkanol, and surfactant have been investigated using the method of dilution. The surfactants used were hexadecyl trimethylammonium bromide and sodium dodecylsulfate, and the cosurfactants were n‐alkanols with varying chain length from (C₅–C₉). The distribution of cosurfactant (n‐alkanol) between the interface of water and oil regions at the threshold level of stability as well as the energetics of the transfer of the cosurfactant from the oil to the interfacial region have been examined as a function of varying cosurfactant chain length (C₄–C₉) and temperature. The structural parameters (including dimension, population density and effective water pool radius) of the dispersed water droplets in the oil phase have also been evaluated and correlated with alkanol chain length.     

Facile Way to Synthesize Nα‐Boc‐Nβ‐Cbz‐2,3‐ Diaminopropionic Acid Derivatives via 5‐Oxazolidinone

An economical and facile synthesis of N^α‐Boc‐N^β‐Cbz‐2,3‐diaminopropionic acid derivatives is reported. The key aspect of this method is employment of N‐Boc‐5‐oxazolidinone moiety to simultaneously provide proper protection of α‐amido and α‐carboxyl functional groups and affords the desired isocyanate 5 successfully by a Curtius rearrangement. The obtained intermediate 6 can be readily converted to various derivatives of N^α‐Boc‐N^β‐Cbz‐2,3‐diaminopropionic acid by conventional procedure.     

Indium Tris(dodecyl Sulfonate) [In(DS)3]–Catalyzed Formation of 3‐(9H‐Xanthen‐9‐yl)‐1H‐indole Derivatives in Water at Room Temperature

In(DS)₃ catalyzes formation of 9H‐xanthen‐9‐ol with indoles at room temperature in water to afford a class of 3‐(9H‐xanthen‐9‐yl)‐1H‐indole derivatives in high yields.     

Conversion of Epoxides to β‐Chlorohydrins with Thionyl Chloride and β‐Cyclodextrin in Water

Several epoxides are efficiently converted to the corresponding β‐chlorohydrins in impressive yields with thionyl chloride in the presence of β‐cyclodextrin using water as solvent at room temperature.     

Water‐in‐oil Emulsions Stabilized by Hydrophobized Microfibrillated Cellulose

The properties of water‐in‐toluene emulsions stabilized solely by hydrophobized microfibrillated cellulose (MFC) were investigated. By varying the degree of surface substitution (DSS), the wettability of the MFC was altered. All emulsions prepared with MFC displayed excellent stability to coalescence. The stability to gravity‐induced sedimentation increased with increasing MFC concentration, the highest stability being obtained with MFC of moderate hydrophobicity. Drop sizes increased with increasing DSS, with a corresponding decrease in stability to sedimentation. An increase in the toluene:water ratio at constant MFC concentration resulted in a decrease in the average drop size. For all emulsions, the polydispersity in drop size decreased with decreasing average drop diameter.