Preparation and radical ring-opening polymerization of 2-substituted-4-methylene-1,3-dioxolanes

2-Methyl-2-phenyl-4-methylene-1,3-dioxolane ( IIa ), 2-ethyl-2-phenyl-4-methylene-1,3-dioxolane ( IIb ), 2-phenyl-2-(n-propyl)-4-methylene-1,3-dioxolane ( IIc ), 2-phenyl-2-(i-propyl)-4-methylene-1,3-dioxolane ( IId ), 2-(n-heptyl)-2-phenyl-4-methylene-1,3-dioxolane ( IIe ), 2-methyl-2-(2-naphthyl)-4-methylene-1,3-dioxolane ( IIf ), and 2,2-diphenyl-4-methylene-1,3-dioxolane ( IIg ) were prepared and polymerized in the presence of a radical initiator. IIa–IIf were found to undergo vinyl polymerization with ring-opening reaction accompanying the elimination of ketone groups in bulk. IIg was found to undergo the quantitative ring-opening reaction accompanying the elimination of benzophenone in solution to obtain polyketone without any side reaction.     

Ring-expansion polycondensation of 2-stanna-1,3-dioxepane (or 1,3-dioxepene) with dicarboxylic acid chlorides

2,2-Dibutyl-2-stanna-1,3-dioxepane 1 (or 1,3-dioxepene 2) were prepared from 1,4-butane (or 1,4-butene) diol and dibutyltin dimethoxide. They were polycondensed at 80°C in n-heptane with adipoyl-, suberoyl, sabacoyl chloride and with decane-1,10-dicarbonyl chloride. In the case of suberoyl chloride and 2,2-dibutyl-2-stanna-1,3-dioxepane reaction time, temperature and stoichiometry were varied to optimize both the molecular weight and the fraction of cyclic polyesters. With a slight excess of the dicarboxylic acid chlorides, only macrocyclic polyesters were obtained in all cases. The resulting cyclic polyesters were characterized by viscosity measurements, by ¹H and ¹³C NMR and by MALDI-TOF mass spectrometry.     

Thermal degradation of poly(alkyl acrylates). II. Primary esters: Ethyl,n-propyl,n-butyl,and 2-ethylhexyl

Quantitative analyses of the products of thermal degradation of poly(ethyl acrylate), poly(n-propyl acrylate), poly(n-butyl acrylate) and poly(2-ethylhexyl acrylate) have been made, principally by the combined application of GLC and mass and infrared spectroscopy. Data are recorded in mass balance tables. The major gaseous products are carbon dioxide and the olefin corresponding to the ester group. The minor gaseous products include the corresponding alkane, the alkane/olefin ratio being of the order of 10^?2–10^?3, and traces of carbon monoxide and hydrogen. The alcohol corresponding to the alkyl group is the major liquid product but there are also traces of monomer and the corresponding methacrylate. Alcohol production exhibits autocatalytic properties. The chain fragment fractions of the products are colored yellow and have average chain lengths of 3.2, 3.3, 3.6, and 5.6 for the ethyl, n-propyl, n-butyl and 2-ethylhexyl esters, respectively. The infrared spectra are similar to those of the parent polymers but with well defined differences. Insolubility develops in the ethyl, n-propyl, and n-butyl esters, but the residual material from poly(2-ethylhexyl acrylate) remains soluble even at very advanced stages of degradation. All of these products and reaction characteristics are accounted for in terms of radical reactions with a unique initiation step.     

Functionality and structure of polymers. I. Photoreaction and fluorescence of polyesters having pendant anthryl groups

Various polyesters having pendant (9-anthryl)methyl groups were prepared from 2-(9-anthryl)methylpropane-1,3-diol and the esters or chlorides of dicarboxylic acids. These polyesters are poly[2-(9-anthryl)-methylpropane-1,3-diyl-oxy-(9-anthryl)methylmalonyl-oxy](PA-1A), poly-[2-9-anthrylmethylpropane-1,3-diyl-oxysuccinyloxy](PA-2), poly-[2-9-anthrylmethylpropane-1,3-diyl-oxyadipyloxy](PA-4), poly[2-(9-anthryl)methylpropane-1,3-diyl-oxysebacyloxy] (PA-8), poly[2-(9-anthryl)methylpropane-1,3-diyl-oxy-(1-naphthyl)methylmalonyloxy](PA-1N), and poly[2-(9-anthryl)methylpropane-1,3-diyl-oxyterephthaloyloxy](PA-Ph). Although the absorption spectrum of the anthryl group is not influenced by the change in the environment in which the anthryl group is located, the fluorescence spectra show characteristic change reflecting the environment around the chromophore. Dimer, aggregates, or excimer fluorescence of anthryl groups and energy transfer from naphthyl to anthryl groups for PA-1N were discussed. The rates of photodimerization of anthryl groups determined spectroscopically in dilute solutions for these polyesters and their monomer model compound(1,3-diacetoxy-2(9-anthryl)methylpropane) (MA), were in the following order; PA-8 > PA-4 > PA-1A > PA-2 > PA-Ph > MA. The effects of polymer structure on the photoreaction were discussed on the basis of information on molecular interactions obtained by fluorescence spectroscopy. The fraction of intramolecular cyclization was estimated from dependence of the rate of photoreaction on the concentration of the polyesters. When anthryl groups are linked by a long, flexible polymethylene chain (PA-8), intramolecular process predominates whereas intermolecular dimerization proceeds almost exclusively for a rodlike molecule(PA-Ph). These results are discussed from the viewpoint of the structure–functionality relationship in polymeric systems.     

Stereoselective synthesis of spiro derivatives of 2,4-dimethyl-2,3,4,4a,5,6-hexahydro-6<Emphasis Type="Italic">H</Emphasis>-benzo[<Emphasis Type="Italic">c</Emphasis>]quinolizine

The reactions of 2-(3,5-dimethylpiperidino)benzaldehyde with Meldrum's acid and cyclohexane-1,3-dione occur as a tandem of the Knoevenagel condensation and cyclization promoted by the tert-amino effect. The cyclization yields only one isomer with the axial hydrogen atoms in positions 4 and 4a of the benzoquinolizine ring. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1492–1494, June, 2005.     

Synthesis and kinetic modeling of biomass‐derived renewable polyesters

The biomass‐derived polyesters poly(1,3‐propylene 2,5‐furandicarboxylate) (PPF), poly(1,3‐propylene succinate) (PPS) and poly(1,3‐propylene 2,5‐furandicarboxylate‐co‐1,3‐propylene succinate) (PPFPS) have been synthesized via a two‐step process involving polycondensation and azeotropic distillation. The kinetic parameters were obtained by fitting the experimental data from a batch polymerization reactor to three different kinetic models for polyesterification reactions. The activation energies of the all monomer systems were obtained by Arrhenius plots. Given the increasing availability of biomass‐derived monomers their use in renewable polyesters as substitutes for fossil fuel derived chemicals becomes a distinct possibility. The kinetic modeling of the uncatalyzed polyesterification reactions will enable further integrative process simulation of the studied bioderived polymers and provide a reference for future practical study or industrial applications of catalyzed polyesterification reactions and other bioderived monomer systems. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2876–2887     

Magnetic nanoparticle supported amine: An efficient and environmental benign catalyst for versatile Knoevenagel condensation under ultrasound irradiation

Amine functionalized silica coated Fe₃O₄ nanoparticles (SiO₂@MNP-A) were successfully prepared as a novel heterogeneous amine. The catalyst was characterized by XRD, FT-IR, TEM, magnetic measurement, elemental analysis and was found to be a magnetically separable and highly active catalyst for ambient Knoevenagel condensation of aromatic aldehydes and α-aromatic (heteroaromatic or polyaromatic)-substituted methylene compounds in water under ultrasonic irradiation to afford the corresponding products in good to excellent yields. Very interestingly, SiO₂@MNP-A successfully catalyze the reaction of the non-cyano substituted compound with benzaldehyde to achieve a key intermediate for the preparation of Atorvastatin calcium in green and atom-economic manner. In addition, the catalyst SiO₂@MNP-A can be reused for 8 times without any obvious loss of its activity. The role of ultrasonication in the Knoevenagel condensation was also discussed with the assistance of UV–vis spectrometry.     

功能化碳纳米管作为固体碱用于Knoevenagel缩合

采用液相沉积方法分别制备了聚乙烯亚胺功能化和聚4-乙烯基吡啶功能化的碳纳米管催化剂,利用N2吸附/脱附、透射电子显微镜(TEM)、热重分析(TG)以及酸碱滴定等方法对所得催化剂的结构和碱性进行了表征,测试了其对于苯甲醛和丙二腈的Knoevenagel缩合反应的催化性能。结果发现,聚乙烯亚胺功能化的碳纳米管具有比聚4-乙烯基吡啶功能化的催化剂更高的碱催化能力。对碳纳米管进行强酸预处理可增加其与修饰剂的相互作用,虽然会降低其碱催化活性,但却可使其稳定性大大提高。     

功能化碳纳米管作为固体碱用于Knoevenagel缩合

采用液相沉积方法分别制备了聚乙烯亚胺功能化和聚4-乙烯基吡啶功能化的碳纳米管催化剂,利用N₂吸附/脱附、透射电子显微镜（TEM）、热重分析（TG）以及酸碱滴定等方法对所得催化剂的结构和碱性进行了表征,测试了其对于苯甲醛和丙二腈的Knoevenagel缩合反应的催化性能。结果发现,聚乙烯亚胺功能化的碳纳米管具有比聚4-乙烯基吡啶功能化的催化剂更高的碱催化能力。对碳纳米管进行强酸预处理可增加其与修饰剂的相互作用,虽然会降低其碱催化活性,但却可使其稳定性大大提高。     

Synthesis,characterization and evaluation of novel benzothiazole clubbed chromene derivatives for their anti-inflammatory potential

Abstract

A series of chromene derivatives (5a–f) were prepared by multistep synthesis process using 2-[3-phenyl prop-2-ene nitrile] 1,3-benzothiazole and dimedone using piperidine as catalyst in ethanol. The reaction was found to proceed via Knoevenagel condensation of aldehydes with benzothiazole, followed by the elimination to afford the 2-(benzo[d]thiazol-2-yl)-3-(aryl)acrylonitrile, which then undergoes Michael addition with 5,5-dimethyl-1,3-cyclohexanedione, followed by intramolecular O-cyclization to give the products. The structures of all novel constructed derivatives were corroborated by elemental analysis and spectral data (FT-IR, ¹H-NMR, ¹³C-NMR and Mass). Subsequently, the compounds were tested for their in-vivo anti-inflammatory activity. This study revealed that these synthesized derivatives tend to have significantly anti inflammatory activity and shall prove as structural templates in the design and development of new anti inflammatory drugs.     

PHOTOCHEMICAL AND FREE RADICAL INITIATED REACTIONS OF1,3-DIMETHYLTHYMINE WITH ISOPROPANOL

Abstract— A photochemically induced reaction of 1 ,3-dimethylthymine (DMT) with isopropanol leads to the formation of four alcohol adducts. The products have been identified as the cis and trans isomers of 5 ,6-dihydro-1,3-dimethyll-6-(2-hydroxy-2-propyl) thymine (I and II), 2.4-diaza-8-hydroxy-2.4,6.8-tetramethylbicyclo[4.2.0]octan-1,3-dione (III), and 5 ,6-dihydro-1,3-dimethyl-6-(2-oxo-l-propyl)-thymine (IV). An acetone photosensitized reaction of DMT with isopropanol gives the same products in a similar relative yield distribution. In both of these reactions, cyclobutane dimers of DMT are produced as well. Free radical reactions of 2-hydroxyisopropyl radicals with DMT, initiated by decomposition of di- t -butyl peroxide, leads to formation of only one of the cis and trans isomers described above. along with 1 ,3-dimethyl-5-(2-hydroxy-2-methyl-1-propyl)uracil (V).     

Preparation and properties of poly(methylene terephthalates)

A systematic study of poly(methylene terephthalates) has been made. Melting points, second-order transition temperatures, and solubility temperatures are presented for the homologous series of terephthalate polyesters of ethylene glycol through 1,10-dodecanediol, and for terephthalate copolyesters of: (1) ethylene glycol/1,3-propanediol and (2) ethylene glycol/1,4-butanediol. Fiber properties of the terephthalate polyesters and the 70/30 ethylene glycol/1,3-propanediol copolyterephthalate ester are presented. Only the first three members of the poly(methylene terephthalate) series show promise for use in textile fibers.     

Combining “click” chemistry and step‐growth polymerization for the generation of highly functionalized polyesters

Aliphatic polyesters bearing pendant alkyne groups were successfully prepared by step‐growth polymerization of different building blocks such as adipic acid and succinic acid in combination with an acetylene‐based diol, 2‐methyl‐2‐propargyl‐1,3‐propanediol, besides 1,4‐butanediol and ethylene glycol. It was demonstrated that the alkyne groups survive the high reaction temperatures (200 °C) in the presence of a radical inhibitor. The alkyne loading has been tuned by the ratio of the different monomers used, up to 25 mol % of alkyne groups. Subsequently, the alkyne groups have been reacted with azides by the copper‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction, a popular type of “click” chemistry. “Click” reactions have been performed quantitatively in the presence of benzyl azide and azide‐terminated poly(ethylene glycol), yielding brush copolymers in the latter case. Kinetic investigations about this click reaction have been performed by means of on‐line Fourier transform mid‐infrared spectroscopy, which was reported for the first time in the field of the click chemistry research. A whole range of functionalized polyesters, based on poly(ethylene succinate) and poly(butylene adipate), is available, the properties of which can be tailored by choosing the appropriate azide compound. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6552–6564, 2008     

Thiophene-2-carbaldehyde and benzaldehyde thiosemicarbazones in reactions with propargyl bromide and 1,3-dibromopropyne

The reaction of thiophene-2-carbaldehyde and benzaldehyde thiosemicarbazones with propargylbromide in methanol provided S-(2-propyne)thiosemicarbazones hydrobromides of thiophene-2-carbaldehyde and benzaldehyde. Reaction products obtained from thiosemicarbazones and 1,3-dibromopropyne in methanol at heating were 2-thenilydene(benzylidene)azino-4-bromomethylidene-4,5-dihydrothiazol-3-ium bromides.     

Polymeric organosilicon systems. XVII. Synthesis and photochemical and conducting properties of poly[o-and m-(disilanylene)phenylene]s

Poly[o-(tetramethyldisilanylene)phenylene] ( 2a ), poly[o-(1,2-dimethyldiphenyldisilanylene)-phenylene] ( 2b ), poly[m-(tetramethyldisilanylene)phenylene] ( 2c ), and poly[m-(1,2-dimethyldiphenyldisilanylene)phenylene] ( 2d ) were prepared by the sodium condensation reaction of the corresponding 1,2-and 1,3-bis (chlorosilyl)benzenes in toluene. Irradiation of thin films of 2a-2d in air resulted in a rapid decrease of absorption maxima in the ultraviolet region. The photolysis of 2b and 2d in benzene afforded photodegradation products with low molecular weights. When thin films of 2b and 2d were doped with antimony pentafluoride vapor, films which have conductivities of semi-conductor level were obtained. © 1993 John Wiley & Sons, Inc.     

Synthesis of diols containing 5-benzyluracil base and their polymers

Preparation of analogs of acyclic nucleoside, two diols containing 5-benzyluracil base derived from 2-(5-benzyluracil-1-yl)propanoic acid (BUPA), and the corresponding model polymers of polynucleotide with linear polyester backbone and 2-(5-benzyluracil-1-yl)propionamido-type pendant as a side chain are described. N-(1′,3′-Dihydroxy-2′-methyl-2′-propyl)-2-(5-benzyluracil-1-yl)propionamide (HEBUPA) and its isomer N(β,β′-dihydroxyethyl)-2-(5-benzyluracil-1-yl)propionamide (HEBUPA) were prepared through the selective N-acylation of primary aminodiol, 2-methyl-2-amino-1,3-propanediol and secondary aminodiol, diethanolamine with BUPA, respectively, by the active ester-N-hydroxy-5-norbornene-2,3-dicarboximide (HONB) method. The resulting diols were polycondensed with active diamide of benzotriazole (HBT) such as 1,1′-(terephthaloyl)bisbenzotriazole (PBBT), 1,1′-(isophthaloyl)bisbenzotriazole (IPBBT), 1,1′-(sebacocyl)bisbenzotriazole (SeBBT), giving semirigid and flexible polyesters containing 5-benzyluracil derivative as the side group, by the selective O-acylation of active diamide-benzotriazole technique. Diols HMBUPA and HEBUPA were found to be very potent inhibitors of uridine phosphorylase isolated from Sarcoma 180 cells, with K_i values of 0.13 and 0.11 μM, respectively.     

Influence of the substituent on azobenzene side-chain polyester optical storage materials

A number of poly(1,3-propylenetetradecanedioates) or poly(1,3-propyleneadipates) with pendant p-substitued azobenzenes linked through a hexylene spacer in the 2-position are prepared. The substituents comprise: cyano, nitro, methoxy, hydrogen, methyl, n-butyl, phenyl, fluoro, trifluoromethyl, chloro, and bromo. ¹³C NMR spectroscopic and molecular mass investigations substantiate good film forming characteristics. The optical storage performance of thin polyester films are investigated through polarization holography. The resulting diffraction efficiency is mapped and discussed as a function of irradiation power and exposure time. Polytetradecanedioates with cyano-, nitro-, methyl-, fluoro-, or trifluoro-methyl-azobenzene reach more than 50% diffraction efficiency. Investigations of anisotropy induced at different temperatures reveal that the polyesters are only photosensitive in a narrow temperature range around T_g.     

Indium Trichloride (InCl3) Catalyzed Synthesis of Fused 7‐Azaindole Derivatives Using Domino Knoevenagel‐Michael Reaction

An efficient and high yielding methodology developed for the synthesis of fused 7‐azaindole derivatives via one pot multicomponent assembly process of cyclic 1,3‐dicarbonyls with substituted aldehydes and 5‐amino‐1‐tert‐butyl‐1H‐pyrrole‐3‐carbonitrile. The transformation occurs via domino Knoevenagel‐ Michael reaction followed by intramolecular cyclization in the presence of catalytic amount of InCl₃ (10 mol %). Mild reaction conditions, easy isolation of products, and good to excellent yields in a shorter period of time are the silent features of present methodology. Structures of all the newly prepared compounds have been corroborated by various spectroscopic methods.     

Synthesis and Thermal Behavior of Polyesters Derived from 1,3‐Propanediol and Various Aromatic Dicarboxylic Acids

Abstract

Seven aromatic dicarboxylic acids were esterified by melt polycondensation in two steps with 1,3‐propanediol (1,3‐PDO) in the presence of tetrabutoxytitanium as catalyst. The acids used were: terephthalic (TPA), isophthalic (IPA), naphthalene‐2,6‐dicarboxylic (2,6‐NDA), naphthalene‐1,4‐dicarboxylic (1,4‐NDA), biphenyl‐4,4^′‐dicarboxylic (4,4^′‐BPDA), diphenylsulfone‐4,4^′‐dicarboxylic (4,4^′‐DPSDA), and pyridine‐2,6‐dicarboxylic acid (2,6‐PDA). In the first step, the esterification reaction was monitored, by measuring the distilled water. The prepared oligomers were polycondensated in a second step under high vacuum using the same catalyst as before. The received poly(propylene dicarboxylate)s were characterized by viscometry, carboxyl end‐group content (CC), color measurement, and were studied by differential scanning calorimetry (DSC). From this study, the above polyesters could be classified to three classes: (a) easily crystallizing polyesters derived from TPA and 2,6‐PDA, (b) slow crystallizing polyesters derived from IPA and 2,6‐NDA, and (c) amorphous polyesters derived from 1,4‐NDA, 4,4^′‐BPDA, and 4,4^′‐DPSDA.     

Amine-catalyzed direct assembly of indanedione-fused spirobenzo[a]carbazoles from α,α-dicyanomethylidenecarbazoles

An unprecedented amine-catalyzed stereoselective reaction of α,α-dicyanomethylidenecarbazoles with indane-1,3-dione and aryl/heteroaryl aldehydes afforded a series of indanedione-fused benzo[a]carbazoles. The plausible mechanism for the formation of the final products result from the above MCR is described based on successive Knoevenagel/Michael/nucleophilic reactions. The products were obtained in moderate to good yields without the use of any chromatographic techniques. The structures of the synthesized spirocycloadducts were confirmed by elemental analysis and spectral data (FT-IR, ¹H NMR, and 13C NMR).