Nitrosation kinetics of phenolic components of foods and beverages

The kinetics of the reactions between sodium nitrite and phenol or m-, o-, or p-cresol in potassium hydrogen phthalate buffers of pH 2.5–5.7 were determined by integration of the monitored absorbance of the C-nitroso reaction products. At pH > 3, the dominant reaction was C-nitrosation through a mechanism that appears to consist of a diffusion-controlled attack on the nitrosatable substrate by NO⁺/NO₂H₂⁺ ions followed by a slow proton transfer step; the latter step is supported by the observation of basic catalysis by the buffer which does not form alternative nitrosating agents as nitrosyl compounds. The catalytic coefficients of both anionic forms of the buffer have been determined. The observed order of substrate reactivities (o-cresol ≈ m-cresol > phenol ≫ p-cresol) is explained by the hyperconjugative effect of the methyl group in o- and m-cresol, and by its blocking the para position in p-cresol. Analysis of a plot of ΔH^# against ΔS^# shows that the reaction with p-cresol differs from those with o- and m-cresol as regards the formation and decomposition of the transition state. The genotoxicity of nitrosatable phenols is compared with their reactivity with NO⁺/NO₂H₂⁺. © 1997 John Wiley & Sons, Inc.     

Mass spectrometry of onium salts—I. Studies on anilinium oxides

The mass spectra of the three isomeric trimethylanilinium oxides and their methyl-d₃ analogues show that the m- and p- isomers undergo intermolecular trans-O-alkylation before evaporation. In the o-isomer, only 10% transalkylated product is observed and there is strong evidence that most of this isomer evaporates without undergoing structural changes. By indirect introduction, however, the o-isomer showed only transalkylated product. The most important fragmentation patterns on electron-impact are α-cleavage on the N-methyl carbon or expulsion of the O-substituent with formation of a quinoid structure. The latter dominates for the o- and p-methyl ethers while the former is the most important pathway for the m-isomer and for the corresponding phenols. Lower fragments are of modest intensity.     

Bio-based vinylphenol family: Synthesis via decarboxylation of naturally occurring cinnamic acids and living radical polymerization for functionalized polystyrenes

A series of bio-based vinylphenols or hydroxystyrenes is prepared by simple decarboxylation of various naturally occurring cinnamic acids such as o-, m-, and p-coumaric; caffeic; ferulic; and sinapinic acids, which possess hydroxy groups and other substituents at different positions on the aromatic ring. After protection of the phenolic moieties with trialkylsilyl groups, reversible addition–fragmentation chain-transfer polymerization is accomplished with cumyl dithiobenzoate to afford various bio-based hydroxyl-protected polystyrenes with controlled molecular weights and narrow molecular weight distributions. Subsequent deprotection of the silyl groups under mild conditions results in a series of well-defined functionalized polystyrenes possessing different numbers (mono-, di-, tri-) of hydroxy groups at different positions (o, m, p). The obtained functionalized polystyrenes show unique thermal properties depending on the substituents, and those with phenol and catechol groups serve as reducing agents for silver ions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 91–100     

Influence of substituted groups on the binding ability of benzoyl-modified β-cyclodextrins

A series of substituted benzoyl modified β-cyclodextrins, including mono-6-O-(p-methylbenzoyl)-β-CD (1), mono-6-O-(m-methylbenzoyl)-β-CD (2), mono-6-O-(o-methylbenzoyl)-β-CD (3), mono-6-O-(p-methoxylbenzoyl)-β-CD (4), mono-6-O-(m-methoxylbenzoyl)-β-CD (5), mono-6-O-(o-methoxylbenzoyl)-β-CD (6), mono-6-O-(m, p-dimethoxylbenzoyl)]-β-CD (7), mono-6-O-(o,m-dimethoxylbenzoyl)-β-CD (8), and mono-(6-O-benzoyl)-β-CD (9) were synthesized and their inclusion properties were studied by using fluorescence spectroscopy. The binding constants (K_a) of the modified β-CD derivatives with 2-p-toluidinylnaphthalene-6-sulfonate (TNS) were determined on the basis of the fluorescence spectroscopy. The effect of types and location of substituted groups of the benzene ring of the modified β-cyclodextrins on the binding property was discussed. Results indicated that the substituents had significant influences on the binding abilities of modified β-cyclodextrins.     

Radical polymerization behavior of hydroxystyrenes

Homopolymerizations of m- and p-hydroxystyrene and their copolymerizations with styrene and methyl methacrylate by use of azobisisobutyronitrile as initiator were investigated, and the results were compared with those obtained previously o-hydroxystyrene. Intrinsic viscosities of m- and p-hydroxystyrene polymers obtained by bulk and solution polymerizations were ca. 2 to 3 times larger than those of o-hydroxystyrene polymers obtained by the similar conditions. The structures of the polymers thus produced were investigated by infrared and ultraviolet spectroscopy. These studies suggested that all of the homopolymers consisted mainly of structures of normal vinyl type polymer. R_p was proportional to [I]^0.52 for m-hydroxystyrene and to [I]^0.50 for p-hydroxystyrene, for o-hydroxystyrene R_p was proportional to [I]^0.72. A reasonable chain transfer mechanism for these monomers was postulated. The apparent activation energies of polymerization for m- and p-hydroxystyrene were found to be 20.1, and 18.0 kcal/mole, respectively, compared to the value of 21.5 kcal/mole for o-hydroxystyrene. Monomer reactivity ratios and Q ? e values for m- and p-hydroxystyrene were determined, and the results were also compared with the case of o-hydroxystyrene. Copolymerization generally gave a polymer with relatively high intrinsic viscosity, even in the case of o-hydroxystyrene.     

Paradoxes in Thermal Stability of the Liquid-Crystal Phase of Phenylpropargyl Phenyl Ethers: I. Synthesis and Mesogenic Properties of Phenylpropargyl Phenyl Ethers

The ethers PhCCCH₂OC₆H₃RR' were prepared in 51-83% yields by reactions of phenylpropargyl tosylate in alkaline solution with appropriate p- and o-substituted phenols. Below are given R, R', and the ranges of existence of the nematic mesophase (°C): p-I, H, 104-137; p-Cl, H, 65-117; p-F, H, 33-53; p-OMe, H, 79-120; H, H, 44-115; p-(Me)₃C, H, 74-82; p-COOH, H; p-NO₂, H, 77-96; o-NO₂, H, 83-139; o-CHO, H, 75-115; p-Br, o-NO₂, 95-132; p-Cl, o-NO₂, 71-123; p-F, o-NO₂, 79-120; o-Cl, H, none; p-COOPr, H, none; and p-COOPh, H, 116-134. In contrast to the traditional views, the presence of the o-nitro group enhances, rather than distorts, the thermal stability of the mesophase. The stability increases in parallel with the -R effect of the o-substituent.     

(o-Hydroxyphenyl)methylphosphonic acids: Synthesis and potentiometric determinations of their pKa Values

(o-Hydroxyphenyl)methylphosphonic acids are readily obtained from o-(bromomethyl)- or o-(hydroxymethyl)phenols and trialkyl phosphites. Subsequent hydrolysis leads to the corresponding phosphonic acids. For a series of such compounds, the pK_a values have been determined by potentiometry. Their dependence on additional substituents in the aromatic ring is discussed in terms of electronic and steric effects.     

Effect of methoxy position on dynamic mechanical and shape memory properties of methoxyphenol-based polybenzoxazines

Abstract

Two series of benzoxazines were synthesized from o-, m-, and p-methoxyphenols, two polyetheramines with different molecular weights, and formaldehyde. The glass transition temperatures (T _gs) of m-methoxyphenol-based polybenzoxazines are respectively higher than those of o- and p-methoxyphenol-based counterparts. The polybenzoxazines exhibit thermally induced one-way dual-shape memory behavior based on T _g, and the o- and p-methoxyphenol-based polybenzoxazines exhibit higher shape memory performance than m-methoxyphenol-based counterparts under motion constraints.     

On the CO elimination from [M – CH3]+ ions in substituted phenyl methyl ethers

It was inferred from the collisional activation spectra that CO loss from [M – CH₃]⁺ ions generated from o-,m- and p-cyanoanisole yields a common ion, presumably the cyanocyclopentadienyl cation. A similar product ion is found to be generated in the three dimethoxybenzene isomers. In case of o-dimethoxybenzene loss of CO was also found to occur via an important additional route, which leads to the formation of protonated phenol.     

Thermal Decomposition of Trialkyl/Arylphosphine Gold(I) Cyanide Complexes

Combined TG/DTA techniques have been used to study the thermal decomposition of R₃PAuCN (where Ris ethyl, cyclohexyl, o-tolyl, m-tolyl, p-tolyl, allyl, cyanoethyl,1-naphthyl and phenyl) complexes. It was observed that all of these complexes underwant decomposition cum redox reactions in the range of 200–600oC with evolution of both transligands, which are phosphine and cyanide, leaving metallic gold as a residue. The thermal decomposition of o-Tol₃PAuCN has revealed that this is a stepwise process. In the first step decomposition takes place with evolution of phosphine and generation of AuCN, which in second step undergoes a redox reaction to produce metallic gold. The DTA curves have also confirmed these results. This revised version was published online in July 2006 with corrections to the Cover Date.     

Solvent effects on the proton magnetic resonance spectra of p-substituted phenyltin chlorides

A PMR study of solvent effects on some p-substituted phenyltin chlorides (substituents = CH₃, (CH₃)₃C, CH₃O) is reported. Co-ordination of solvent molecules to the tin atom leads to an unusual low field shift of the o-ring protons. The results for p-tolytin trichloride have been compared with those for p-tolylsilyl trichloride and discussed. In o-, m- and p-tolyltin trichlorides long range spin-spin couplings between the ring methyl protons and the tin atom have been observed. The order of magnitude is o- > p- > m-methyl protons.     

Anharmonic Effect of the Unimolecular Isomerization/Decomposition of Benzyne

The anharmonic and harmonic rate constants were calculated for the unimolecular decomposition of o‐benzyne, the isomerization of o‐benzyne to m‐benzyne, the isomerization of m‐benzyne to p‐benzyne and unimolecular decomposition of p‐benzyne by using the Rice–Ramsperger–Kassel–Marcus (RRKM) theory respectively, in the canonical and microcanonical systems. The geometry and the vibrational frequencies were calculated by MP2 and B3LYP methods with 6‐311G(d,p) basis set and the barrier energies were corrected using CBS‐QB3 theory. The anharmonic effect on the reactions was also examined. Comparison of results for the decompositions of benzyne indicate that both in microcanonical and canonical cases, the anharmonic effect on the decomposition of the o‐C₆H₄ and p‐C₆H₄ are significant, while the anharmonic effect on the two isomerizations are not pronounced.     

Morphology-dependent luminescence properties of poly(benzyl ether) dendrimers

Poly(benzyl ether) dendrimers with o-, m-, and p-isomers of dialkoxybenzene at their focal points [o-, m-, and p-(Gn)₂Ar], having generation numbers (n) of 0–3, were synthesized. ¹H NMR pulse relaxation times (T₁) of the exterior MeO groups of o- and m-(Gn)₂Ar (n = 0–3) all remained in the range of 0.92–1.43 s. In sharp contrast, an exceptionally short T₁ value (0.23 s) was observed for p-(G3)₂Ar. Although their absorption spectral profiles were slightly different from one another, an essential difference was observed for their fluorescence properties. When the generation number was increased, the fluorescence efficiency of o-(Gn)₂Ar increased, but that of p-(Gn)₂Ar decreased, whereas m-(Gn)₂Ar exhibited a relatively small change in the fluorescence efficiency. Fluorescence depolarization studies showed a highly efficient intramolecular energy migration in p-(G3)₂Ar as compared with o-(G3)₂Ar and m-(G3)₂Ar. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3524–3530, 2003     

Isotachophoretic determination of mobility and pKa by means of computer simulation : V. Evaluation of mo and pKa of twenty-eight dipeptides and assessment of separability

Isotachophoretic qualitative indices, R_E, for twenty-eight dipeptides were measured in the range pH 7.4–9.6. The absolute mobility, m_o, and pK_a values were evaluated by the use of the least-squares method, utilizing a simulation of the isotachophoretic steady state. The m_o values were newly evaluated and the pK_a values were in good agreement with literature values. By comparison of the evaluated m_o and pK_a values of the dipeptides with those of the constituent amino acids, simple relationships were found which may be used to estimate the m_o and pK_a values of other dipeptides. The separability of the dipeptides was also evaluated by considering the differences between their simulated effective mobilities. It is concluded that isotachophoresis is very convenient for the separation of dipeptides and their constituent amino acids.     

A pronounced ortho effect in the polymerization of o-substituted β-nitrostyrenes

It was shown in a previous paper that a number of m - and p-substituted β-nitrostyrenes would readily undergo polymerization via anionic initiation with alkoxide ions to yield high polymers, whereas, in all cases, the corresponding o-substituted isomers could not be induced to produce polymers under any conditions tried. This article reports a systematic study of this unexpected “ortho effect” based on the initial postulate that the effect was the result of steric inhibition of the propagation step that would ordinarily lead to polymer. Since the fluorine atom is only slightly larger than the hydrogen atom, the series o-, m-, and p-fluoro-β-nitrostyrenes was synthesized and its alkoxide ion-initiated polymerization studied. Although it was shown in all cases of o-substituted β-nitrostyrenes studied that initiation was rapid, only in the case of o-fluoro-β-nitrostyrene was a substantial amount of polymer obtained. With up to 3 mole % initiator a maximum of 26% polymer was obtained, whereas polymerization was rapid in cases of the meta and para isomers. The values of the propagation rate constants k_p were found to be 1.1 liters/mole-sec for the para isomer as compared with 4.8 × 10^?2 liter/mole-sec for the ortho isomer for a ratio k_p(p)/k_p(o) = 23, the magnitude of this ortho effect for the fluorine atom.     

Base-catalyzed isomerization of phenylpropenes

The prototropic rearrangement of 3-phenyl-1-propenes to the corresponding 1-phenyl-1-propenes was investigated in basic media utilizing 0.1M sodium ethoxide in absolute ethanol at 81°C. It was found that the effect of substituents on the rate of such isomerizations follows the order: p-NO₂ > o-Cl > m-Cl ≥ m-F > p-Br > o-CH₃ > m-CH₃ > m-CH(CH₃)₂ > p-CH(CH₃)₂ ≥ p-C(CH₃)₃ > o-OCH₃. This is consistent with first-order kinetics and “BS” mechanism. Quantitative treatment in terms of Hammett's equation showed a straight line, with a slope (p value) of +2.25. An increase in the strength of the base was also found to cause an increase in the rate of isomerization.     

Formation and stability of gaseous tolyl ions

Collisional activation mass spectra confirm that tolyl ions can be produced from a variety of CH₃C₆H₄Y compounds. High purity o-, m- and p-tolyl ions are prepared by chemical ionization of the corresponding fluorides (Y=F) as proposed by Harrison. In electron ionization of CH₃C₆H₄Y formation of the more stable tropylium and benzyl ionic isomers usually accompanies that of the o-, m- and p-tolyl ions. Isomerization of low energy [CH₃C₆H₄Y]⁺? to [Y–methylenecyclohexadiene]⁺? is proposed to account for most [benzyl]⁺ formation, while the tropylium ion appears to arise from the isomerization of tolyl ions formed with higher internal energies, [o-, m-, p-tolyl]⁺→ [benzyl]⁺→ [tropylium]⁺, consistent with Dewar's predictions from MINDO/3 calculations.     

Protonation constants and thermodynamic properties of amines for post combustion capture of CO2

The leading process for the post combustion capture (PCC) of CO₂ from coal-fired power stations and hence reduction in greenhouse gases involves capture by aqueous amine solutions. Of the reactions that occur in solution, which include CO₂ hydration, de-protonation of carbonic acid, amine protonation and carbamate formation, the protonation of the amine in the absorber and its subsequent de-protonation in the stripper involve the greatest enthalpy changes. In this study, protonation constants (reported as log₁₀ K_prot) of selected series of primary, secondary and tertiary alkanolamines/amines over the temperature range 288–318 K are reported. Selected series studied involve primary, secondary and tertiary mono-, di- and tri-alkanolamines, secondary amines including heterocyclic species, and both –CH₂OH and –CH₂CH₂OH substituted piperidines. van’t Hoff analyses have resulted in the standard molar enthalpies, ΔH_m^o, and molar entropies, ΔS_m^o, of protonation. Trends in ΔH_m^o are correlated with systematic changes in composition and structure of the selected series of amines/alkanolamines, while ΔH_m^o–ΔS_m^o plots generated linear correlations for the mono-, di-, and tri-alkanolamines, the –CH₂OH and –CH₂CH₂OH substituted piperidines, and the alkylamines. These relationships provide a guide to the selection of an amine(s) solvent for CO₂ capture, based on a greater difference in log₁₀ K_prot between the absorber and stripper temperatures.     

Di- and Trinuclear σ-Aryl Iron and Manganese Complexes

Reactions of p- and m-diiodobenzenes, p,p'-diiodobiphenyl, and 1,3,5-triiodobenzene with anions derived from dicarbonyl(cyclopentadienyl)iron and pentacarbonylmanganese, catalyzed by palladium complexes, provide a successful route to mono-, di-, and trinuclear -aryl iron and manganese complexes.     

Synthesis and activity of aryl benzyl methyl sulfonium salts as cationic initiators: Effect of substituent on aryl group

Benzyl o-, m-, and p-substituted phenyl methyl sulfonium salts ( 2b – 2g ) were synthesized and their activities as cationic initiators were evaluated in the bulk polymerization of phenyl glycidyl ether (PGE). Especially, their activities were estimated with respect to the effect of substituents on the aryl groups. In the polymerizations of PGE with a series of benzyl p-substituted phenyl methyl sulfonium salts, the order of their activities was found to be 2c (CH₃OCOO) > 2b (CH₃COO) > 2d (CH₃O) ～ 2a (HO). In particular, 2c was the most active initiator of all, capable of initiating the polymerization of PGE even at room temperature. In the polymerizations with 2a, 2e (m-Cl), 2f (o-CH₃), and 2g (m-CH₃), the activity of 2e was the highest of all while those of 2a, 2f , and 2g were almost the same. These results strongly suggested that the electron-withdrawing group placed on the aryl group undoubtedly enhanced the activity of the sulfonium salts as the cationic initiators.