Examination of the Higuchi Model for the Release of Vitamin B2 from Multilayered Calcium Alginate/Chitosan Beads in Varying pH Medium

The release of model drug vitamin B₂ from calcium alginate/chitosan multi‐layered beads has been studied in the media of varying pH (3 h in the medium of pH 1.0 and for the remaining time in pH 7.4) at 37°C. The quantitative deviation of experimental data from the Higuchi model has been interpretated by using a newly developed ‘curve area measurement’ (CAM) approach. The higher deviation in the initial phase has been explained on the basis of porous structure of beads due to the use of low molecular weight polymers in the preparation of beads.     

聚ε-己内酯的微米硅球固定化猪胰脂肪酶促合成

本文采用微米硅球固定化猪胰脂肪酶为催化剂合成聚ε-己内酯, 以期获得具有较高分子量、 良好生物相容性和使用安全性的生物可降解医用高分子材料.     

In Situ Amperometric Detection of Vesicles and Microgel Phases in an Aggregating System: Calcium Alginate

In situ amperometric characterization of an aggregating system in terms of molecular adsorption and single microparticle interactions at the electrode interface is demonstrated using a model system: alginate/Ca(II) in an aqueous electrolyte solution. Recording of chronoamperometric curves of oxygen reduction at the dropping mercury electrode is designed for detection of dip‐shaped signals of individual gel microparticles. By addition of Ca(II) decrease of alginate adsorption is accompanied by appearance of signals indicating vesicle type association of alginate molecules and microparticles of gel phase. AFM imaging provided evidence of initial stage in calcium alginate gel formation.     

SET‐LRP of vinyl chloride initiated with CHBr3 and catalyzed by Cu(0)‐wire/TREN in DMSO at 25 °C

The single‐electron transfer living radical polymerization (SET‐LRP) of vinyl chloride (VC) initiated with CHBr₃ in dimethylsulfoxide (DMSO) at 25 °C was investigated using Cu(0) powder and Cu(0) wire as the catalyst. It was determined that living kinetics and high conversion are achieved only through the proper calibration of the ratio between Cu(0) and TREN and the concentration of VC in DMSO. For both Cu(0) powder and Cu(0) wire, optimum conversion was achieved with higher levels of TREN than reported in earlier preliminary reports and under more dilute conditions. Using these conditions, 85+% conversion of VC could be achieved with Cu(0) powder and wire to produce white poly(vinyl chloride) (PVC) with M_n = 20,000 and M_w/M_n = 1.4–1.6 in 360 min. The use of Cu(0) wire provides the most effective catalytic system for the LRP of PVC allowing for simple removal and recycling of the catalyst. In the Cu(0) wire‐catalyzed SET‐LRP of VC, the consumption of Cu(0) was monitored as a function of conversion. From these studies, it is evident that the catalyst can be recycled extensively before significant exchange of Cu(0) into Cu(II)X₂ and change in catalyst surface area is observed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 164–172, 2010     

Yolk‐Shell Porous Microspheres of Calcium Phosphate Prepared by Using Calcium L‐Lactate and Adenosine 5′‐Triphosphate Disodium Salt: Application in Protein/Drug Delivery

A facile and environmentally friendly approach has been developed to prepare yolk‐shell porous microspheres of calcium phosphate by using calcium L ‐lactate pentahydrate (CL) as the calcium source and adenosine 5′‐triphosphate disodium salt (ATP) as the phosphate source through the microwave‐assisted hydrothermal method. The effects of the concentration of CL, the microwave hydrothermal temperature, and the time on the morphology and crystal phase of the product are investigated. The possible formation mechanism of yolk‐shell porous microspheres of calcium phosphate is proposed. Hemoglobin from bovine red cells (Hb) and ibuprofen (IBU) are used to explore the application potential of yolk‐shell porous microspheres of calcium phosphate in protein/drug loading and delivery. The experimental results indicate that the as‐prepared yolk‐shell porous microspheres of calcium phosphate have relatively high protein/drug loading capacity, sustained protein/drug release, favorable pH‐responsive release behavior, and a high biocompatibility in the cytotoxicity test. Therefore, the yolk‐shell porous microspheres of calcium phosphate have promising applications in various biomedical fields such as protein/drug delivery.     

ATRP/OMRP/CCT Interplay in Styrene Polymerization Mediated by Iron(II) Complexes: A DFT Study of the α‐Diimine System

A DFT study of various model systems has addressed the interference of catalytic chain transfer (CCT) as a function of the R² substituent in the atom‐transfer radical polymerization (ATRP) of styrene catalyzed by [FeCl₂(R¹N?C(R²)?C(R²)?NR¹)] complexes. All model systems used R¹=CH₃ in place of the experimental Cy and tBu substituents and 1‐phenylethyl in place of the polystyrene (PS) chain. A mechanistic investigation of 1) ATRP activation, 2) radical trapping in organometallic‐mediated radical polymerization (OMRP), and 3) pathways to the hydride CCT intermediate was conducted with a simplified system with R²=H. This study suggests that CCT could occur by direct hydrogen‐atom transfer without any activation barrier. Further analysis of more realistic models with R²=p‐C₆H₄F or p‐C₆H₄NMe₂ suggests that the electronic effect of the aryl para substituents significantly alters the ATRP activation barrier. Conversely, the hydrogen‐atom‐transfer barrier is essentially unaffected. Thus, the greater ATRP catalytic activity of the p‐NMe₂ system makes the background CCT process less significant. The DFT study also compares the [FeCl₂(R¹N?C(R²)?C(R²)?NR¹)] systems with a diaminobis(phenolato) derivative for which the CCT process shows even greater accessibility but has less incidence because of faster ATRP chain growth and interplay with a more efficient OMRP trapping. The difference between the two systems is attributed to destabilization of the Fe^II catalyst by the geometric constraints of the tetradentate diaminobis(phenolato) ligand.     

Production of nanoparticles of methyl methacrylate and butyl methacrylate copolymers by microemulsion polymerization in the presence of maleic acid terminated poly(N-acetylethylenimine) macromonomers as cosurfactant

In this study, MMA/BMA copolymer nanoparticles were synthesized in oil-in-water microemulsions that were stabilized by sodium dodecyl sulphate (SDS) and initiated by potassium persulphate KPS. Maleic acid terminated poly(N-acetylethylenimine) (PNAEI) with two different chain lengths was also included in the recipe, as a cosurfactant and a comonomer. FTIR and ¹H-NMR proved incorporation of the macromonomer in the structure. High polymerization yields were achieved upto 98%. The viscosity average molecular weights of the copolymers were in the range of 2.77-5.50 × 10⁵. The glass transition temperatures of these copolymers were between 50.0 and 63.9 °C. The average diameter of nanoparticles were in range of 40-96 nm. It was possible to produce nanoparticles smaller than 100 nm and with narrower size distributions by using much lower concentrations of SDS by including the macromonomers in the microemulsion polymerization recipe.