Radical polymerization of methyl methacrylate in the presence of isotactic poly(methyl methacrylate)

Methyl methacrylate (MMA) was polymerized by radical initiation at 25°C in DMF in the presence of preformed isotactic PMMA (iMA) with about 90% isotactic triads and different M?_v's, viz., iMA-1: 7.2 × 10⁵; iMA-2, 5.0 × 10⁵; iMA-3, 3.5 × 10⁵; iMA-4, 1.25 × 10⁵; and iMA-5, 1.15 × 10⁵. The MMA:iMA ratio was 6:1. The collected polymers were separated into two fractions by extraction with boiling acetone and characterized by 60 MHz NMR. It is found that the M?_v of the polymer formed ran parallel to the M?_v of iMA. In all cases syndiotactic PMMA (s-PMMA) was produced which associated with the isotactic substrate to form acetone-insoluble stereocomplexes. The syndiotactic polymers probably consist of long syndiotactic and heterotactic sequences. The syndiotacticity decreased with conversion and was generally highest in the presence of iMA-1. With iMA-1 even the formation of some additional i-PMMA (in the acetone-insolubles) was indicated, especially in the later stages of the polymerization. Characterization of the acetone-soluble fractions indicated that i,s-stereoblock polymers were also produced, of which the persistence ratios ρ increased with the M?_v of iMA. From these results it is concluded that this reaction differs from the conventional radical polymerization and can be considered a stereospecific replica polymerization, the driving force being the strong tendency of i- and s-PMMA to associate. The formation of i,s-stereoblock polymers and additional i-PMMA indicates that s-PMMA in its turn can also act as a polymer matrix.     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). II. Syndiotactic PMMA as matrix

Methyl methacrylate (MMA) was polymerized by radical initiation at 25°C in DMF in the presence of preformed syndiotactic PMMA (sMA) with about 90% syndiotactic triads and of different M?_v, viz., sMA-1, 1.6 × 10⁵; sMA-2, 3.0 × 10⁵; and sMA-3, 8.7 × 10⁵. The MMA:sMA ratio was 6:1. The collected polymers were separated into two fractions by extraction with boiling acetone and characterized by 60 MHz NMR. In all cases isotactic PMMA (i-PMMA) was produced, especially in the initial reaction stages, which associated with the syndiotactic substrate to form acetone-insoluble 1:2 i/s-stereocomplexes. The isotacticity decreased with conversion and was highest in the presence of sMA-3. Characterization of the acetone-soluble fractions indicated that i,s-stereoblock polymers were also produced. From these results it is concluded that this reaction can be considered a stereospecific replica polymerization, the driving force being the strong tendency of i-PMMA and s-PMMA to associate. With sMA of M?_v below about 1.2 × 10⁵, no i-PMMA is formed; in other words, no replica polymerization occurs. For polymerizations in the presence of sMA-2, the critical M?_v of propagating chains, with has to be exceeded before stereoassociation is strong enough to effectuate replica polymerization, has been estimated to be 0.6 × 10⁵.     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). IV. Influence of solvent type

Methyl methacrylate (MMA) was polymerized by radical initiation at 25°C or 35°C in various solvents in the presence of stereoregular poly(methyl methacrylate) (PMMA). The occurrence of stereospecific replica polymerization appeared to be related to the capability of stereoassociation of isotactic and syndiotactic PMMA. The solvents can be roughly divided into three types. Type A solvents are polar solvents, which promote stereoassociation resulting in gelation and precipitation. Examples are dimethylformamide, dimethyl sulfoxide, and acetone. Type B solvents are nonpolar aromatic solvents like benzene and toluene, wherein stereoassociation is weaker but still leads to gelation. Type C solvents are very good solvents, in which stereoassociation does not occur. Chloroform and dichloromethane belong to this class. In solvents of type A as well as type B, polymerization in the presence of i-PMMA as a polymer matrix was syndiospecific. However, in the presence of s-PMMA as a polymer matrix the polymerization was isospecific only in type A solvents. The syndiotactic or isotactic triad contents of the polymer formed could be as high as ca. 90% at low conversions. In solvents of type C, polymerization in the presence of stereoregular PMMA proceeds according to a normal radical mechanism. Syndiotacticity was always less than 70%. Stereocomplexes formed in situ during replica polymerization were partly crystalline as detected by x-ray diffraction. The highest crystallinity was detected in those formed in type A solvents.     

Poly(styrene-co-p-(hexafluoro-2-hydroxy-2-propyl)-styrene) blends with syndiotactic and/or isotactic poly(methyl methacrylate)

A modified polystyrene, poly(styrene-co-p-(hexafluoro-2-hydroxy-2-propyl)styrene) (FPS), was blended with syndiotactic and/or isotactic poly(methyl methacrylate) (PMMA) in toluene. Blends were prepared under different conditions to control the self-aggregation of the PMMA segments. The formation of hydrogen bonding and the attendant changes in the aggregation or crystallization of PMMA segments were determined in the solid state by means of FTIR and DSC. The results indicate that for the binary blends, the aggregation of PMMA segments is diminished by hydrogen bonding interaction with either s-PMMA or i-PMMA, and that the interaction is stronger with the s-PMMA blends. For the ternary blends, FPS/s-PMMA/i-PMMA, the preference for stereocomplexation in the system with hydrogen bonding may be attributed to the “kink-nucleated” mechanism, which needs relatively short chain lengths of PMMA segments. Regardless of the order of addition of the components, the formation of crystalline stereocomplexes of s- and i-PMMA could be readily detected. Therefore, the miscibility of the polymer blends is dependent on the competition between the self-aggregation of the s- or i-PMMA segments, stereocomplexation and the hydrogen bonding interaction of PMMA segments with FPS.     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). III. Influence of temperature

Methyl methacrylate (MMA) was polymerized by radical initiation at 0, 25, 50, 75 and 100°C in DMF in the presence of preformed isotactic PMMA (iMA) or preformed syndiotactic PMMA (sMA) with different M?_v and also without preformed PMMA (“blank” polymerizations). From the tacticities of the formed polymers it is concluded that blank polymerization does not conform to simple Bernoulli statistics, but follows at least first-order Markov statistics. The formation of long syndiotactic sequences in the presence of iMA and long isotactic sequences in the presence of sMA denotes still higher-order Markov statistics. The stereoregulating action is improved by higher M?_v of the preformed polymer (matrix) and lower reaction temperature. These influences can be explained by assuming an equilibrium between polymer growth on the matrix and in the “free” solution. For polymerizations in the presence of iMA or sMA below 300°K, the differences in activation enthalpies (ΔH_s/i? – ΔH_i/s?) are practically equal to that for the blank polymerization, ca. 900 cal/mole, whereas the differences in activation entropies (ΔS_s/i? – ΔS_i/s?) differ considerably. (ΔS_s/i? – ΔS_i/s?) values are highly negative in the presence of iMA and highly positive in the presence of sMA. From these results it is concluded that the isotactic and syndiotactic polymer matrices exert a steric influence on the monomer addition process, thus promoting so-called stereospecific replica polymerization.     

Solid matrix polymerization and stereoisomeric complexes of poly(methyl methacrylate)

The polymerization of methyl methacrylate within solid matrices of stereoregular poly(methyl methacrylate) has been studied by proton NMR and wide angle X-ray diffraction. The semi-crystalline isotactic (i-) PMMA matrix was synthesized in the laboratory by anionic polymerization initiated by phenylmagnesium bromide, and the syndiotactic (s-) PMMA matrix was synthesized through a Ziegler–Natta reaction. Matrix polymerization of the monomer was initiated through the redox activation of benzoyl peroxide with N,N-dimethyl-p-toluidine. NMR measurements of triad distributions in matrix-polymerized chains suggest that the well-known stereospecific replica polymerization in PMMA (syndiotactic sequences promote isotactic sequences and vice versa) plays only a limited role in the systems studied. Experimental results indicate that chains grown within the i-PMMA or s-PMMA solid matrices have greater degrees of configurational disorder. The greater concentration of atactic triads in these chains could be the result of limited free volume or steric effects during polymerization in a highly condensed environment. X-ray diffraction studies of solution cast blends of isotactic PMMA and PMMA with conventional tacticity reveal some crystallinity with a structure characteristic of the stereocomplex formed by isotactic and syndiotactic PMMA from suitable solvents. Evidence was obtained for the presence of this complex in solidified mixtures of the i-PMMA solid matrix and liquid monomer. This observation is an example of special intermolecular structures that can form under conditions of in situ growth of chains within a pre-polymerized matrix.     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). V. Kinetics of initial template polymerization

The influence of stereoregular poly(methyl methacrylate) (PMMA) as a polymer matrix on the initial rate of radical polymerization of methyl methacrylate (MMA) has been measured between ?11 and +60°C using a dilatometric technique. Under proper conditions an increase in the relative initial rate of template polymerization with respect to a blank polymerization was observed. Viscometric studies showed that the observed effect could be related to the extent of complex formation between the polymer matrix and the growing chain radical. The initial rate was dependent on tacticity and molecular weight of the matrix polymer, solvent type and polymerization temperature. The accelerating effect was most pronounced (a fivefold increase in rate) at the lowest polymerization temperature with the highest molecular weight isotactic PMMA as a matrix in a solvent like dimethylformamide (DMF), which is known to be a good medium for complex formation between isotactic and syndiotactic PMMA. The acceleration of the polymerization below 25°C appeared to be accompanied by a large decrease in the overall energy and entropy of activation. It is suggested that the observed template effects are mainly due to the stereoselection in the propagation step (lower activation entropy Δ S_p^?) and the hindrance of segmental diffusion in the termination step (higher activation energy Δ E_t^?) of complexed growing chain radicals.     

Methacrylic acid and methyl methacrylate oligomers adsorbed to porous isotactic poly(methyl methacrylate) ultrathin films and mechanistic studies of living template polymerization

Methacrylic acid (MAA), methyl methacrylate (MMA), methacrylamide, and oligomers of MAA and MMA were selected as a model of active radical species in living template polymerization using stereocomplex formation. The adsorption behaviors of the aforementioned model compounds were examined toward porous isotactic‐(it‐) poly(methyl methacrylate) (PMMA) ultrathin films on a quartz crystal microbalance, which was prepared by the extracting of syndiotactic‐(st‐) poly(methacrylic acid) (PMAA) from it‐PMMA/st‐PMAA stereocomplexes. The apparent predominant adsorption of oligomers to monomers was observed in both PMAA and PMMA oligomers, suggesting that the mechanism of template polymerization follows the pick up mechanism. Although vinyl monomers were not incorporated into the porous it‐PMMA ultrathin film, both PMMA and PMAA oligomers were adsorbed at the initial stages. However, adsorbed amounts were limited to about 5 and 15% at 0.1 mol L^?1, respectively, which are much smaller values than corresponding st‐polymers. The results imply that radical coupling reaction is prevented during template polymerization to support the resulting living polymerization. ATR‐IR spectral patterns of oligomer complexes and it‐PMMA slightly changed in both cases, suggesting complex formation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5879–5886, 2008     

Conformational characteristics of stereoregular PMMA and of the stereocomplex: new insights from FTIR measurements

Isotactic (i) and syndiotactic (s) PMMA polymers differ markedly in the physical properties. The fact that these physically unlike macromolecules strongly attract each other with the resultant formation of stereocomplexes is indeed remarkable. Although stereoregular PMMAs and the stereocomplex have been studied over decades, their conformational characteristics are yet a matter of controversy. We performed variable-temperature FTIR measurements on i-PMMA and s-PMMA, followed by a detailed analysis of the temperature dependence of integrated band intensities for C-O stretching modes in the region 1050-1300 cm⁻¹ and achieved, for the first time, the unambiguous conformational assignment for the C-O bands. This enabled reliable IR spectroscopic determination of conformational energies for the backbone and for the ester group. Besides, a comparative analysis of the C-O band intensities in the FTIR spectra of single-component and stereocomplex PMMA films, based on the established band assignments, revealed new features in the structure of the stereocomplex.     

RAFT Polymerization: Adding to the Picture

SUMMARY: Factors affecting the choice of RAFT agent [RSC(Z) = S] for a given polymerization are discussed. For polymerization of methyl methacrylate (MMA), tertiary cyanoalkyl trithiocarbonates provide very good control over molecular weight and distribution and polymerizations show little retardation. The secondary trithiocarbonate RAFT agents with R = CHPh(CN) also gives good control but an inhibition period attributed to slow reinitiation is manifest. Radical induced reduction with hypophosphite salts provides a clean and convenient process for removal of thiocarbonylthio end groups of RAFT-synthesized polymers. Two methods providing simultaneous control over stereochemistry and molecular weight distribution of chains formed by radical polymerization are reported. Polymerization of MMA in the presence of scandium triflate provides a more isotactic PMMA. A similar RAFT polymerization with trithiocarbonate RAFT agents also provides control and avoids issues of RAFT agent instability seen with dithiobenzoate RAFT agents in the presence of Lewis acids. RAFT polymerization of tetramethylammonium methacrylate at 45 °C provides a more syndiotactic PMMA of controlled molecular weight and distribution (after methylation; mm:mr:rr 2:21:77 compared to 3:35:62 when formed by bulk polymerization of MMA).     

Stereospecific polymerization of 9-fluorenyl methacrylate: Tacticity effects on the thermal and photophysical properties of the polymers

Poly(9-fluoreneyl methacrylate) was obtained through anionic polymerization with t-BuLi and t-BuMgBr and through radical polymerization with α,α′-azobisisobutyronitrile. Anionic polymerization with t-BuLi in tetrahydrofuran and radical polymerization afforded syndiotactic polymers (rr ∼ 90%), whereas anionic polymerization with Li and Mg initiators in toluene and CH₂Cl₂ led to isotactic polymers. The thermal and photophysical properties of the polymers were examined. A syndiotactic polymer tended to show higher glass transition and decomposition temperatures than an isotactic polymer. However, polymers with different tacticities were not likely to assume specific, distinctive conformations such as a helix or a π-stacked conformation in solution. An isotactic polymer showed stronger interactions in a CH₂Cl₂ solution with 2,4,7-trinitro-9-fluorenylidenemalononitrile, an electron-acceptor molecule, than a syndiotactic polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4656–4665, 2004     

Thermally stimulated depolarization currents of tactic polymethyl methacrylates and their mixtures

Summary Thermally stimulated depolarization currents (TSDC) of atactic (a), syndiotactic (s) and isotactic (i) PMMA and mixtures ofs- andi-PMMA were measured. In pure tactic PMMA, TSDC peak was obtained at a temperature corresponding to the glass transition temperature of each PMMA. TSDC of mixtures isolated as precipitates from 1/1 and 1/2 (i/sweight ratio) mixed solutions showed a peak which can be attributed to the glass transition temperature of the stereocomplex. TSDC of original l/1 mixture showed two peaks which are ascribed to the glass transition temperature of residual i-PMMA and the stereocomplex. The results suggests that stereocomplex formation occurs ini/s weight ratio of 1/2 independent of the way of preparation.With 9 figures and 1 table     

Adsorption of stereoregular poly(methyl methacrylates) on γ-alumina: Spectroscopic analysis

ABSTRACTS: Three poly(methyl methacrylates) (PMMA) with a racemic fraction ranging from 0.25 to 0.91 have been adsorbed from a chloroform solution on γ-alumina and studied by diffuse reflectance infrared spectroscopy (DRIFT) and solid-state ¹³C NMR spectroscopy. From DRIFT spectra, it is seen that the fraction of carbonyl groups bonded to the surface goes from 0.29 for s-PMMA to 0.41 for i-PMMA, but there is a larger amount of s-PMMA retained on the surface (at any given solution concentration). NMR spectroscopy indicates, from shifts of the methylene and α-methyl carbon peaks (due to the γ-gauche effect), that the adsorption is accompanied by changes in conformation, with an increase in the number of trans conformers, particularly with i-PMMA. These results indicate that s-PMMA adsorbs on γ-alumina in a brush-like configuration, with a relatively small number of groups attached to the surface, and tails and loops sticking out of the surface, whereas i-PMMA adsorbs in a sheet-like configuration, with a greater number of interacting groups. In both cases, the adsorption is accompanied with an increase in the number of trans conformers as compared to the bulk conformation. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2985–2995, 1999     

Effect of tetraalkylammonium salts on the tacticity of poly(methyl methacrylate), 1. Initiation by ethyl α-lithioisobutyrate

The anionic polymerization of methyl methacrylate (MMA) was carried out in the presence of ethyl α-lithioisobutyrate (α-LiEtIB)/quaternary ammonium salts (QAS) in toluene and tetrahydrofuran/toluene (vol. ratio 75/25) at −60°C. It was found that the tacticity of PMMA strongly depends on size and shape of QAS. A highly isotactic polymerization in toluene was observed, when using the system α-LiEtIB/trimethylhexadecylammonium bromide. The initiator system α-LiEtIB/tetrahexylammonium chloride produces polymers with a high (>50%) syndiotactic content and relatively low polydispersity. The influence of QAS on the mode of polymerization is due to specific salt effect resulting from the cation exchange reaction, from the participation of the bulky substituent in the primary solvation shell, and ionic aggregation between the growing anion, Q⁺ and LiX.     

Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

Polymerization of methyl methacrylate using bis(β‐ketoamino)nickel(II)–MAO catalytic systems

The polymerization of methyl methacrylate (MMA) was investigated using a series of bis(β‐ketoamino)nickel(II) complexes in combination with methylaluminoxane in toluene solution. The binary catalyst is necessary for initiating MMA polymerization and producing PMMA with high molecular weights but broad molecular weight distributions. The effects of reaction temperature and Al:Ni molar ratios on the polymerization of MMA were examined in detail. Both steric bulk and electronic effects of the substituents around the imino group in the ligand on MMA polymerization activities could be observed. Relative to electronic effects, the steric hindrance of the ligands displayed a more significant effect on the catalytic activities, with the catalytic activity sequence observed in the order 4 > 1 > 2 > 3 > 5 > 6. Structural analyses of the polymers by ¹³C NMR spectra indicate that polymerization yields PMMA with a syndiotactic‐rich atactic microstructure. Copyright © 2006 John Wiley & Sons, Ltd.     

Single electron transfer‐living radical polymerization of methyl methacrylate in fluoroalcohol: Dual control over molecular weight and tacticity

The Cu(0)‐mediated single electron transfer‐living radical polymerization (SET‐LRP) of methyl methacrylate (MMA) using ethyl 2‐bromoisobutyrate (EBiB) as an initiator with Cu(0)/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine as a catalyst system in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was studied. The polymerization showed some living features: the measured number‐average molecular weight (M_n,GPC) increased with monomer conversion and produced polymers with relatively low polydispersities. The increase of HFIP concentration improved the controllability over the polymerization with increased initiation efficiency and lowered polydispersity values. ¹H NMR, MALDI‐TOF‐MS spectra, and chain extension reaction confirmed that the resultant polymer was end‐capped by EBiB species, and the polymer can be reactivated for chain extension. In contrast, in the cases of dimethyl sulfoxide or N,N‐dimethylformamide as reaction solvent, the polymerizations were uncontrolled. The different effects of the solvents on the polymerization indicated that the mechanism of SET‐LRP differed from that of atom transfer radical polymerization. Moreover, HFIP also facilitated the polymerization with control over stereoregularity of the polymers. Higher concentration of HFIP and lower reaction temperature produced higher syndiotactic ratio. The syndiotactic ratio can be reached to about 0.77 at 1/1.5 (v/v) of MMA/HFIP at ?18 °C. In conclusion, using HFIP as SET‐LRP solvent, the dual control over the molecular weight and tacticity of PMMA was realized. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6316–6327, 2009     

Radical polymerizations and copolymerizations of dimethylstannyl dimethacrylate and trimethylstannyl methacrylate

The radical polymerizations and copolymerizations of dimethylstannyl dimethacrylate (DSM) and trimethylstannyl methacrylate (TSM) in dimethylformamide (DMF) were studied. These monomers did not polymerize thermally, but easily underwent polymerization in the presence of α,α′-azobisisobutyronitrile and on irradiation with ultraviolet light. The polymer obtained from TSM was soluble in DMF and methanol, but that from DSM was insoluble in any organic solvents; this polymer probably consists of a network structure. These polymers were converted to poly(methyl methacrylate) (PMMA) by means of acid hydrolysis and then methylation with diazomethane. The content of syndiotactic triad was determined from infrared spectra of PMMA derived from the polymers of DSM and TSM. It was noted that the content of syndiotactic triad was greater in the radical polymerization of TSM than those of DSM at every temperature investigated. The differences in the activation enthalpy (ΔΔH?) and in the activation entropy (ΔΔS?) between isotactic and syndiotactic additions were determined as follows: for DSM, ΔΔH? = ～0 cal/mole, ΔΔS? = ?0.856 eu; for TSM, ΔΔH? = 229 cal/mole, ΔΔ = ?1.09 eu. From the radical copolymerizations of DSM and TSM with styrene at 60°C, the copolymerization parameters, Q and e, were evaluated as follows: for DSM, Q = 1.36, e = 0.41; for TSM, Q = 0.45, e = ?0.37. These results were compared with the reported effects of stannic chloride and zinc chloride on the radical polymerization of methyl methacrylate.     

Polymerization of (E)‐1,3‐Pentadiene and (E)‐2‐methyl‐1,3‐pentadiene with neodymium catalysts: Examination of the factors that affect the stereoselectivity

(E)‐1,3‐Pentadiene (EP) and (E)‐2‐methyl‐1,3‐pentadiene (2MP) were polymerized to cis‐1,4 polymers with homogeneous and heterogeneous neodymium catalysts to examine the influence of the physical state of the catalyst on the polymerization stereoselectivity. Data on the polymerization of (E)‐1,3‐hexadiene (EH) are also reported. EP and EH gave cis‐1,4 isotactic polymers both with the homogeneous and with the heterogeneous system, whereas 2MP gave an isotactic cis‐1,4 polymer with the heterogeneous catalyst and a syndiotactic cis‐1,4 polymer, never reported earlier, with the homogeneous one. For comparison, the results obtained with the soluble CpTiCl₃‐based catalyst (Cp = cyclopentadienyl), which gives cis‐1,4 isotactic poly(2MP), are examined. A tentative interpretation is given for the mechanism of the formation of the stereoregular polymers obtained and a complete NMR characterization of the cis‐1,4‐syndiotactic poly(2MP) is reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3227–3232     

Anionic polymerization of biomass‐derived furfuryl methacrylate: Controlling polymer tacticity and thermoreversibility

Biomass‐derived furfuryl methacrylate (FMA) has been successfully polymerized for the first time by anionic polymerization to produce atactic (at‐), isotactic (it‐), or syndiotactic (st‐) poly(furfuryl methacrylate) (PFMA), depending on initiator structure and reaction conditions. Thermal properties of the PFMA materials are strongly affected by the polymer tacticity. Most notably, while both isotactic and syndiotactic polymers can undergo inter‐ or intrachain crosslinking reactions when heated to 290 °C, there is no evidence for the atactic polymer to perform the same reaction. Furthermore, the PFMA tacticity also greatly affects the amount of stable carbonaceous materials it produces when heated to 650 °C, with st‐PFMA forming the largest amount of such materials (26.9%), as compared to only 5.6% by at‐PFMA. Using the Diels–Alder (DA) “click reaction” between the reactive furfuryl group within the PFMA polymers as the diene equivalent and a bismaleimide as the dienophile, thermoreversible smart polymers have been successfully prepared. Thermoreversibility of the preformed crosslinked polymers has been demonstrated, thanks to the facile retro‐DA reaction upon heating and the DA reaction upon cooling of such self‐healing materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2793–2803