Radical copolymerization of acrylic monomers. IV. Effect of substituents on the radical polymerization and copolymerization of phenyl acrylates

The kinetics of radical polymerization of phenyl, ortho-chlorophenyl, and para-chlorophenyl acrylates, as well as their copolymerization with methyl methacrylate, have been studied dilatometrically. The results obtained indicate that the overall rate of polymerization is affected by the flexibility of the growing radicals. However, the copolymerization of these monomers with methyl methacrylate gives overall rates rather similar for all three systems, being fundamentally regulated by the formation of reversible π complexes between the donor aromatic rings and the acceptor methacrylic double bonds. Dilatometric methods for the study of the copolymerization reactions have been tested and the corresponding binary bonding frequencies B_ij and conversion factors K_ij have been calculated for the copolymerization of ortho- and para-chlorophenyl acrylates with methyl methacrylate.     

Donor-Acceptor Complexes in Copolymerization. XVII. NMR Analyses of Random and Alternating Styrene–α-Chloroacrylonitrile Copolymers

The NMR spectra of random and equimolar alternating copolymers of styrene with a-chloroacrylonitrile were studied. The monomer sequence distribution in the random copolymers, prepared in the presence of free radical catalysts, as determined from NMR analyses, was in accordance with the values expected from the r₁ and r₂ values derived from the conventional copolymerization theory. The alternating structure of the copolymer prepared by complexation with AlEt_1-5 Cl_1-5 was confirmed. The equimolar random copolymer, prepared by free radical initiation, was shown to contain essentially alternating sequences.     

Complexed copolymerization of vinyl compounds with alkylaluminum halides

The monomer reactivity in the complexed copolymerization of vinyl compounds with alkylaluminum halides has been extensively surveyed. Equimolar copolymers were obtained in various combinations of monomers which are classified into two monomer groups, A and B. The group B monomers are conjugated vinyl compounds having nitrile or carbonyl groups in the conjugated position and form complexes with alkylaluminum halides. The group A monomers are donor monomers having low values, such as olefins, haloolefins, dienes, and unsaturated esters. These A monomers belong to the same group of monomers which give alternating copolymers in conventional radical copolymerization with maleic anhydride, SO₂, and so on. In addition the complexed copolymerization has the same specific characteristics as the conventional alternating copolymerization, i.e., high reactivities of allyl-resonance monomers and inner olefins and no transfer of halogen atom to the copolymers in CCl₄. These features suggest little or no participation of the A monomer radical. The Q-e scheme is also discussed in terms of the monomer reactivity. More than two monomers selected from groups A and B give multicomponent copolymers in which alternating sequential structures hold with respect to A and B. Anomalous mutual reactivities between two B monomers in the terpolymerization were observed and indicate that the nature of radical in the complexed copolymerization may be different from that expected by the Lewis-Mayo equation. The complexed radical mechanism previously proposed is discussed in connection with the specific behavior mentioned above.     

Copolymerization of vinyl cyclohexane and α-methyl vinyl cyclohexane with acrylonitrile

Copolymerization of vinyl cyclohexane and α-methyl vinyl cyclohexane with acrylonitrile in the presence of a complexing agent AlEtCl₂ results in the formation of alternate copolymers. In the copolymerization of vinyl cyclohexane with acrylonitrile the copolymer composition depends on the ratio of acrylonitrile to AlEtCl₂. If this ratio is unity, alternating copolymers of the composition 1:1 are formed; with a ratio greater than unity statistical copolymers that contain more than 50% acrylonitrile units are produced. The ¹H-NMR spectroscopy measurements indicate that the interaction between the comonomers and the complexing agent leads to the formation of ternary donor–acceptor complexes of equimolar composition. The equilibrium constants of these complexes at ?60°C have been determined. The effects of temperature, nature of solvent and dilution on the yield, and composition of the copolymers of vinyl cyclohexane with acrylonitrile formed have been studied. By lowering the temperature the yield of copolymers increases but their composition remains equimolar. An increase in the polarity of the medium results in an increase in copolymer yield, whereas the yield decreases if the reaction is conducted in a donor-solvent medium. Dilution of the reaction mixture disrupts the alternation of units in the macrochain of copolymers. The kinetic pecularities of copolymerization have been investigated. The linear dependence of the copolymerization rate on the product of comonomer concentration is observed. The rate of copolymerization is proportional to the square root of the incident light intensity. Various additions of radical type and irradiation accelerate the process of copolymerization. The mechanism of alternating copolymerization of vinyl cyclohexane monomers with acrylonitrile in the presence of AlEtCl₂ is discussed in terms of homopolymerization of the comonomer complex.     

Some aspects of copolymerization of dienes under the influence of π-allyl complexes of nickel

π-Allyl complexes of nickel induce stereospecific homopolymerization of cyclohexadiene-1,3 and 2,3-dimethylbutadiene with the formation of crystalline polymers. These polymers consist of 1,4-monomer units in cis-configuration for polycyclohexadiene and in trans-configuration for poly-2,3-dimethylbutadiene. Peculiarities of copolymerization of cyclohexadiene-1,3 with butadiene and isoprene and of 2,3-dimethylbutadiene with butadiene under the influence of various π-allyl complexes of nickel are studied. By i.r.- and NMR-spectroscopy and radiochemical methods, the composition of copolymers for the above pairs of monomers are determined and the reactivity ratios are found. Influence of the monomers on the microstructure of the chain in copolymerization is established; the mechanism of this phenomenon is discussed.     

Regularities of diene copolymerization by coordination catalytic systems and the mechanism of stereoregulation

A study has been conducted of the relative reactivity of a series of dienes (butadiene, isoprene, 2,3-dimethylbutadiene, cyclohexadiene-1,3), as well as of butadiene and styrene, in copolymerization by various coordination catalyst systems based on transition metals: nickel, cobalt, titanium, chromium, molybdenum, and tungsten. The microstructure of homopolymers and copolymers of dienes has been investigated. Regularities have been established in the mutual influence of the comonomers on the microstructure of a polymer chain. Experimental data on the influence of the concentration of diene monomer, and electron-donating and electron-accepting compounds on the microstructure of polydiene chain have been used in discussing the alternative mechanisms of stereoregulation in diene polymerization by active centers of the π-allyl type.     

Charge transfer complex formation in in-situ maleic anhydride and N-vinyl caprolactam copolymer and copolymer/organo-montmorillonite nanoarchitectures

The binary copolymerization of maleic anhydride (MA) and N-vinyl caprolactam (VCL) or considered as acceptor (A)?donor (D) monomer systems were used (MA:VCL) 50:50 in BPO (0.5%) as an initiator at 70°C under nitrogen atmosphere. The functional copolymers, having a combination of rigid/flexible linkages and an ability of complex-formation with interlayered surface of organo-silicate, and their nanocomposites have been synthesized. Interlamellar in situ complex-radical copolymerization of intercalated monomer complexes of MA and VCL undergoes with stearyl amine surface modified montmorillonite (O-MMT) and monomer mixtures. Charge transfer complex formation was followed and identified by UV-Vis-NIR spectroscopy. Equilibrium constant (K_AD) molar absorption coefficient (?^AD)) of the complex were determined by the Benesi-Hildebrand, Scott and Ketaalar equations respectively. The results show that copolymerization of MA:VCL system was preceded via alternating copolymerization mechanism. Obtained functional alternating copolymer and copolymer/O-MMT nanostructures were characterized by XRD and TEM.     

An alternating copolymer of maleimide and atropic acid with narrow molecular weight distribution prepared by radical mechanism

Three basic conditions for preparation of alternating copolymer with narrow molecular weight distribution were derived from the element kinetic equations of binary radical copolymerization. Using maleimide (MI) and atropie acid (ATA) as model monomer pairs and dioxane as the solvent the alternating copolymer with molecular weight distribution in the range of 1.09--1.20 was prepared successfully by charger transfer complex (CTC) mechanism in the presence of benzoyl peroxide at 85℃. The monomer reactivity ratioes r_1(MI)=0.05±0.01 and r_2(ATA)=0.03±0.02 were measured. The alternating eopolymerization was carried out through formation of a contact-type CTG and then alternating addition of MI and ATA monomers. The molecular weight of the copolymers is nearly independent of the feed ratio in a large range and the polymerization rate dropped with an increase in ATA in feed ratio.     

Anionic copolymerization of 1,1-diphenylethylene and 2,3-dimethylbutadiene

1,1-Diphenylethylene (M₂) and 2,3-dimethylbutadiene (M₁) were copolymerized with n-butyllithium in tetrahydrofuran. The rate of consumption of each monomer was followed by the change of high resolution NMR spectra of the reaction mixture. The copolymerization proceeded alternately, if the ratio of initial monomer concentrations, [M₂]₀/[M₁]₀, was sufficiently larger than unity. By assuming the rate constant k₂₂ to be zero, the constants k₂₁ were obtained from the consumption rates of the monomers. In the alternating copolymerization, 2,3-dimethylbutadiene was incorporated into the copolymer only as the 1,4-structure, while the 1,2-structure was predominant in homopolymerization.     

Controlled radical copolymerization of N-vinylpyrrolidone with 1,1,1,3,3,3-hexafluoroisopropyl-α-fluoroacrylate

Narrow disperse copolymers of N-vinylpyrrolidone with 1,1,1,3,3,3-hexafluoroisopropyl-α-fluoroacrylate have been prepared for the first time by reversible addition fragmentation chain transfer pseudo-living radical polymerization in the presence of benzyl dithiobenzoate. The relative activities of the monomers indicating the occurrence of alternating copolymerization have been estimated. The copolymerization of equimolar N-vinylpyrrolidone-1,1,1,3,3,3-hexafluoroisopropyl-α-fluoroacrylate mixtures shows typical features of reversible addition fragmentation chain transfer pseudoliving radical polymerization: deceleration of polymerization compared to the classical radical process, degeneration of the gel effect, successive increase in the number-average molecular mass with conversion, and formation of narrow disperse copolymers.     

Polymerization behavior of bistrimethylsilyloxycycloalkenes

The radical copolymerizations of bistrimethylsilyloxycycloalkenes, such as 1,2-bistrimethylsilyloxycyclobutene (I), 1,2-bistrimethylsilyloxycyclopentene (II), and 1,2-bistrimethylsilyloxycyclohexene (III), were carried out with acceptor monomers, such as maleic anhydride, N-phenylmaleimide, and methyl methacrylate. I and II gave alternating copolymers with maleic anhydride and random copolymers with N-phenylmaleimide but no copolymer with methyl methacrylate. III gave no copolymer with the acceptor monomers. These polymerization behaviors of bistrimethylsilyloxycycloalkenes were explained primarily in terms of the electron donor–acceptor interaction between both monomers.     

Radiation-induced copolymerization of tetrafluoroethylene with vinyl ethers

Radiation-induced copolymerization of tetrafluoroethylene with various vinyl ethers has been studied. It was found that tetrafluoroethylene can be copolymerized with vinyl ethers to give alternating copolymers over a wide range of the initial monomer concentration in the monomer mixture. The monomer reactivity ratios were determined for the copolymerization of tetrafluoroethylene with n-butyl vinyl ether as 0.005 (r_TFE) and 0.0015 (r_NBVE). The rate of copolymerization is extremely high and has a maximum at an equimolar concentration of two monomers. The alternating structure of the copolymers was confirmed by the analysis of NMR spectra. Some thermal properties of the copolymers were measured by DSC and DTA.     

Synthesis and characterization of new low bandgap polyfluorene copolymers for bulk heterojunction solar cells

Two new low bandgap alternating polyfluorene copolymers based on dioctylfluorene and donor‐acceptor‐donor monomers have been synthesized via a Suzuki polymerization reaction. The resulting copolymers have low optical bandgaps at 1.99–1.98 eV. The bulk heterojunction polymer solar cells were fabricated with the conjugated polymers as the electron donor and 6.6‐phenyl C₆₁‐butyric acid methyl ester as the electron acceptor. The power conversion efficiencies of the solar cells based on copolymers 1 and 2 are 0.37 and 0.42%, respectively, under the illumination of AM 1.5, 100 mW/cm². The results indicate that the two copolymers are promising conjugated polymers for polymer solar cells. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5336–5343, 2009     

Controlled random and alternating copolymerization of (meth)acrylates,acrylonitrile, and (meth)acrylamides with vinyl ethers by organotellurium‐, organostibine‐, and organobismuthine‐mediated living radical polymerization reactions

Random and alternating copolymerizations of acrylates, methacrylates, acrylonitorile, and acrylamides with vinyl ethers under organotellurium‐, organostibine‐, and organobismuthine‐mediated living radical polymerization (TERP, SBRP, and BIRP, respectively) have been studied. Structurally well‐controlled random and alternating copolymers with controlled molecular weights and polydispersities were synthesized. The highly alternating copolymerization occurred in a combination of acrylates and vinyl ethers and acrylonitorile and vinyl ethers by using excess amount of vinyl ethers over acrylates and acrylonitorile. On the contrary, alternating copolymerization did not occur in a combination of acrylamides and vinyl ethers even excess amount of vinyl ethers were used. The reactivity of polymer‐end radicals to a vinyl ether was estimated by the theoretical calculations, and it was suggested that the energy level of singly occupied molecular orbital (SOMO) of polymer‐end radical species determined the reactivity. By combining living random and alternating copolymerization with living radical or living cationic polymerization, new block copolymers, such as (PBA‐alt‐PIBVE)‐block‐(PtBA‐co‐PIBVE), PBA‐block‐(PBA‐alt‐PIBVE), and (PTFEA‐alt‐PIBVE)‐block‐PIBVE, with controlled macromolecular structures were successfully synthesized. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Controlled radical (co)polymerization of (meth)acrylic esters via the reversible addition-fragmentation chain-transfer mechanism

The homopolymerization of acrylic and fluoroacrylic esters mediated by benzyl dithiobenzoate and dibenzyl trithiocarbonate proceeds in the controlled mode via the reversible addition-fragmentation chain-transfer mechanism, while the controlled radical polymerization of methacrylic esters is not effected under these conditions. The molecular-mass characteristics of the copolymers of acrylic and methacrylic esters may be satisfactorily controlled by benzyl dithiobenzoate-mediated copolymerization when the content of acrylic esters is no less than 50 mol %. If a reversible addition-fragmentation chain-transfer agent active with respect to only one of the monomers is used, compositionally homogeneous narrowly dispersed copolymers are formed via the azeotropic copolymerization of the monomers up to high conversions. The controlled copolymerization of N-vinylpyrrolidone and fluoroacrylates allows the synthesis of alternating narrowly dispersed amphiphilic copolymers with properties different from those of alternating copolymers with a broad molecular-mass distribution.     

Alternating copolymerization of maleic anhydride with allyl chloroacetate

Some regularities of radical alternating copolymerization of maleic anhydride with allyl chloroacetate are studied. The formation of donor–acceptor complexes between comonomers with complexing constant K_c = 0.052 L/mol is found using ¹H NMR spectroscopy. The kinetic parameters for this copolymerization reaction are found and the quantitative contribution of monomer complexes to chain-growth radical reactions is calculated. It is shown that either a “free-monomer” mechanism (dilute solutions) or a “mixed” mechanism (concentrated solutions) prevails for chain growth during radical copolymerization depending on total monomer concentration. It is found that inhibition of degradative chain transfer in the course of the reaction studied takes place owing to the presence of α-chlorine atom in the allyl chloracetate molecule and formation of charge transfer complex.     

A General Strategy To Access Alternating Styrene/Substituted Styrene Copolymers by Using a Traceless Controlling Group

We herein report a synthetic strategy for alternating copolymers of styrene and substituted styrenes by utilizing α-styryl boronate pinacol ester ( StBpin ) as the co-monomer through radical alternating copolymerization followed by protodeboronation. The excellent alternating polymerization behavior of the StBpin co-monomer in such a radical polymerization system is considered to be attributed to the steric hindrance and radical stabilization exerted by the Bpin group. This strategy is effective with a wide range of substituted styrene co-monomers regardless of the electronic nature of the substituents, and the protodeboronation of the alternating Bpin-containing polymers is highly efficient without polymer backbone alternation. RAFT living polymerization was also compatible with this approach. Thus, this strategy provides a way to build-up alternating copolymers consisting of similar styrene-type co-monomers, which has been inaccessible by conventional synthetic methods.     

Activity of diallylamido-bis(diethylamido)guanidinium chloride in radical polymerization reactions

The activity of diallylamido-bis(diethylamido)guanidinium chloride in radical polymerization and copolymerization with vinyl monomers giving rise to random copolymers has been studied. A lower activity of diallylamido-bis(diethylamido)guanidinium chloride than that of vinyl monomers has been demonstrated. It has been shown that this monomer readily copolymerizes with sulfur dioxide and alternating copolymers of equimolar composition are formed regardless of the comonomer ratio in the initial mixture and the reaction conditions (the nature of solvent and initiator, temperature, and conversion). The structure of polymers has been studied by ¹³C NMR spectroscopy.     

Reduced‐bandgap triphenylamine‐alt‐benzo[1,2‐b:4,5‐b′]dithiophene copolymers pending benzothiadiazole or diketopyrrolopyrrole units for efficient polymer solar cells

Two new side‐chain donor–acceptor (D‐A)‐based triphenylamine‐alt‐benzo[1,2‐b:4,5‐b′]dithiophene (TPA‐alt‐BDT) copolymers ( P1 and P2 ) with pendant benzothiadiazole (BT)/diketopyrrolopyrrole (DPP) in TPA unit were synthesized by Stille coupling polymerization. Their thermal, photophysical, electrochemical, blend film morphology and photovoltaic properties were investigated. Efficient bulk heterojunction polymer solar cells (PSCs) were obtained by solution process using both copolymers as donor materials and PC₇₁BM as acceptor. The maximum power conversion efficiency (PCE) of 3.17% with a highest open‐circuit voltage (V_oc) of 0.86V was observed in the P1 ‐based PSCs, while the maximum short‐circuit current (J_sc) of 10.77 mA cm^?2 was exhibited in the P2 ‐based PSCs under the illumination of AM 1.5, 100 mW cm^?2. The alternating binary donor units and pending acceptor groups played a significant role in tuning photovoltaic properties for this class of the side‐chain D–A‐based copolymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4103–4110     

Synthesis and characterization of new alternating,amphiphilic, comblike copolymers of poly(ethylene oxide) macromonomer and N‐phenylmaleimide

A surface‐active p‐vinyl benzyloxy‐ω‐hydroxy‐poly(ethylene oxide) macromonomer containing 22 pendant structural units of ethylene oxide (St–PEO₂₂) was synthesized with an initiation method. Because of its solubility in a large variety of solvents, the free‐radical copolymerization with electron‐acceptor N‐phenylmaleimide (NPMI) was performed at 60 °C in benzene and tetrahydrofuran (THF) as isotropic media and in a water–THF mixture or water as a heterogeneous medium. Oil‐soluble 2,2′‐azobisisobutyronitrile and water‐soluble 4,4′‐azobis(4‐cyanovaleric acid) were used as the initiators at fixed concentrations. Two different St–PEO₂₂/NPMI comonomer ratios (1/1 and 3/7) at a fixed total comonomer concentration in the polymerization system were used. The structures, compositions, and microstructure peculiarities of the obtained alternating, amphiphilic, comblike copolymers were determined by NMR analysis. For the copolymers synthesized in hydrophilic media, differential scanning calorimetry showed, near the endothermic peak attributed to the melting of the poly(ethylene oxide) side chains, the presence of a second peak due to the partially ordered phase that could exist between the crystalline state and the isotropic melt. Also, the thermal stability of the obtained copolymers was studied with thermogravimetric analysis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 479–492, 2005