Preparation and polymerization of some vinyl monomers containing the 2-oxo-1,3-dioxolane group

The syntheses and polymerizations of (2-oxo-1,3-dioxolan-4-yl)methyl acrylate, 4-(2-oxo-1,3-dioxolan-4-yl)methyl itaconate, and (2-oxo-1,3-dioxolan-4-yl)methyl maleate are described. Reactivity ratios in the copolymerization of these monomers with other comonomers are reported and the Alfrey-Price Q and e values calculated. The post-polymerization effects of ultraviolet light and heat on these polymers and copolymers are presented and compared to those for similar polymers containing the 2,2-dimethyl-1,3-dixolane groups, which performs as an internal ultraviolet sensitizer. The 2-oxo derivatives are crosslinked thermally but not by ultraviolet light. The crosslinking reaction can be catalyzed by acids, bases, and salts.     

Preparation and polymerization of some vinyl monomers containing the 1,3-dioxolane group

The synthesis and structure determinations of (2,2-dimethyl-1,3-dioxolan-4-yl)-methyl acrylate, 4-(2,2-dimethyl-1,3-dioxolan-4-yl)methyl itaconate, and [(2,2-dimethyl-1,3-dioxolan-4-yl)methyl] methyl fumarate are described. Reactivity ratios in the copolymerization of these monomers with other comonomers are reported and the Alfrey-Price Q and e values calculated. The post-polymerization study of the effects of ultraviolet light and heat on these polymers and copolymers is presented. The 1,3-dioxolane group when appended to the polymer chain performs as an internal ultraviolet sensitizer. A mechanism is offered to explain the crosslinking behavior of these polymers when treated with ultraviolet light.     

Radical copolymerization of proto-hemin dimethyl ester

Iron(III) proto-porphyrin IX dimethyl ester (HDME) can copolymerize with π-conjugated monomers binding at one end of the polymer chain. Apparent Q, e values of HDME were Q = 70 and e = ?0.17. The copolymerization of HDME with π-unconjugated monomer was feasible by using π-conjugated monomer as a third component. When unconjugated vinylimidazoles were used as monomers, the obtained ternary copolymers of HDME formed intramacromolecular complexes of iron(II) porphyrin with vinylimidazole residues, which gave stable carbon monoxide adducts.     

Vinylhydroquinone. III. Copolymerization of vinylhydroquinone and vinyl monomers by tri-n-butylborane

The copolymerization of vinylhydroquinone (VHQ) and vinyl monomers, e.g., methyl methacrylate (MMA), 4-vinyl-pyridine (4VP), acrylamide (AA), and vinyl acetate (VAc), by tri-n-butylborane (TBB) was investigated in cyclohexanone at 30°C under nitrogen. VHQ is assumed to copolymerize with MMA, 4VP, and AA by vinyl polymerization. The following monomer reactivity ratios were obtained (VHQ = M₂): for MMA/VHQ/TBB, r₁ = 0.62, r₂ = 0.17; for 4VP/VHQ/TBB, r₁ = 0.57, r₂ = 0.05; for AA/VHQ/TBB, r₁ = 0.35, r₂ = 0.08. The Q and e values of VHQ were estimated on the basis of these reactivity ratios as Q = 1.4 and e = ?;1.1, which are similar to those of styrene. This suggests that VHQ behaves like styrene rather than as an inhibitor in the TBB-initiated copolymerization. No homopolymerization was observed either under nitrogen or in the presence of oxygen. The reaction mechanism is discussed.     

Copolymerization of new pyrazolone-containing monomers with certain vinyl comonomers

The polymerization ability of two new pyrazolone-containing monomers—3-methyl-1-phenyl-4-crotonoyl-pyrazolone-5 ( Cr ) and 3-methyl-1-phenyl-4-(3′-phenyl-acryloyl) pyrazolone-5 ( Cy )—was investigated. The monomers were obtained by acylation of 3-methyl-1-phenyl-pyrazolone-5 with crotonyl chloride or cinnamoyl chloride, respectively. It was established that the two monomers do not homopolymerize either under the action of ionic and radical initiators nor with γ-rays (doses between 2 and 10 MRad). In contrast to this, the two monomers copolymerize with other vinyl comonomers. Copolymers of Cr and Cy with methacrylic acid (MAA), methyl methacrylate (MMA), and Styrene (St) were synthesized by radical copolymerization. The molecular weights of the polymer products obtained were in the 10,000–65,000 range. It was established that the molecular weight characteristics of the copolymers were affected by the concentration of the pyrazolone-containing monomer and by the chemical nature of the solvent used. The copolymerization of Cr and Cy with MAA was investigated in detail in order to evaluate the relative activity of the new monomers during copolymerization. The reactivity ratios (r) were calculated by three different methods with good agreement. The values obtained for the monomer pairs are: r_MAA = 0.61 ± 0.01, r_Cr = 0.04 ± 0.01; r_MAA = 0.64 ± 0.05, r_Cy = 0.02 ± 0.02. The Q/e values for Cr and Cy were determined using the reactivity ratios of both monomers.     

Copolymerization of trialkylvinyltin compounds

The polymerizations of trimethylvinyltin (TMSnV) and tributylvinyltin (TBSnV) were carried out with the use of γ-ray, radical, or ionic initiators. These monomers did not undergo the polymerization by themselves, but they did copolymerize with styrene (St) or methyl methacrylate (MMA) when a radical initiator was used. From the results obtained by the copolymerization, monomer reactivity ratios and Q–e values were obtained as follows: for the system St(M₁)? TMSnV, r₁ = 44.8, r₂ = 0.001, Q₂ = 0.005, e₂ = 0.962; for the system MMA (M₁)? TMSnV, r₁ = 25.1, r₂ = 0.03, Q₂ = 0.036, e₂ = 0.933; for the system St(M₁)? TBSnV, r₁ = 16.0, r₂ = 0.005, Q₂ = 0.017, e₂ = 0.822; for the system MMA(M₁)? TBSnV, r₁ = 27.9, r₂ = 0.03, Q₂ = 0.031, e₂ = 0.822. The abilities of TMSnV and TBSnV to polymerize are discussed on the basis of the Q and e values obtained.     

Synthesis and characterization of original functional polymers of tetrafluoroethylene and 4,5,5‐trifluoro‐4‐ene pentyl acetate

The bulk radical copolymerization of tetrafluoroethylene (TFE) with 4,5,5‐trifluoro‐4‐ene pentyl acetate (FAc), initiated by tert‐butyl peroxypivalate to synthesize original, functionalized fluorinated poly(TFE‐co‐FAc), was investigated. FAc monomer was prepared from a five‐step process. The copolymerization was carried out in batch at different initial monomer molar ratios ([TFE]_o/[FAc]_o ranging from 95/5 to 10/90 mol %) and at different initiator concentrations (ranging between 0.075 and 1.100 mol % about the monomers) at 70 °C. All the experiments revealed the production of fluorooligomers as evidenced by an allylic‐transfer reaction from FAc. The microstructure of these copolymers (i.e., the molar percentage of both monomers in the copolymers) was assessed by ¹⁹F NMR spectroscopy. From the kinetics of copolymerization, two key characteristics were determined. First, the reaction order to the initiator (being 1.07) and that of FAc monomer (0.85) showed a heterogeneous character of the copolymerization and monomolecular chain‐transfer reaction to FAc. Second, from the Tidwell and Mortimer method, the reactivity ratios of both comonomers were determined, showing a tendency to alternance in a wide range of initial monomeric ratios (30/70–70/30): r_FAc = 0.20 ± 0.26 and r_TFE = 0.18 ± 0.15. Alfrey and Price's Q and e values of FAc were calculated by Greenley's technique [Q_FAc = 0.098 (from Q_TFE = 0.032) and e_FAc = 1.23 (vs e_TFE = 1.63)], indicating that FAc is a strong electron‐withdrawing monomer as TFE. The normalized monomer‐diad and triad fractions as a function of the polymer composition were obtained from the comonomer sequence‐distribution procedure. The average molecular weights and molecular weight distributions as well as the thermal properties (glass‐transition temperature and decomposition temperature) of the fluorocopolymers were assessed and are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1693–1706, 2004     

Vinyl polymerization. 178. Copolymerizations of p-substituted phenyl vinyl sulfides

The copolymerizations of p-substituted phenyl vinyl sulfides (M₂) having OCH₃, CH₃, H, Cl, and Br substituents with styrene and methyl methacrylate (M₁) and their intercopolymerizations at 60°C. were studied. From the results of copolymerizations with styrene and methyl methacrylate, the monomer reactivity ratios and the Q₂e₂ values were determined. For example, the Q and e values for unsubstituted phenyl vinyl sulfide were 0.45 and ?1.26 in the copolymerization with methyl methacrylate. This result indicated the importance of the 3d orbital resonance between the sulfur atom and the adjacent carbon atom in the transition state of copolymerizations. The relative reactivities of these monomers toward the polymer radicals were found to be correlated with the Hammett σ constants of the substituents. In the intercopolymerizations of these monomers, it was also found that the relative reactivities followed the Hammett equation approximately.     

Synthesis and polymerization of fluorinated monomers bearing a reactive lateral group. XIV. Radical copolymerization of vinylidene fluoride with methyl 1,1‐dihydro‐4,7‐dioxaperfluoro‐5,8‐dimethyl non‐1‐enoate

The radical copolymerization in solution of vinylidene fluoride (VDF; or 1,1‐difluoroethylene) with methyl 1,1‐dihydro‐4,7‐dioxaperfluoro‐5,8‐dimethyl non‐1‐enoate (MDP) initiated by di‐tert‐butyl peroxide is presented. Six copolymerization reactions were investigated with initial [VDF]₀/[MDP]₀ molar ratios of 35/65 to 80/20. Both of these comonomers copolymerized in this range of copolymerization. Moreover, these comonomers homopolymerized separately under these conditions. The copolymer compositions of these random copolymers were calculated by means of ¹⁹F NMR spectroscopy, which allowed the quantification of the respective amounts of each monomeric unit in the copolymers. The Tidwell–Mortimer method was used for the assessment of the reactivity ratios (r_i) of both comonomers, which showed a higher incorporation of MDP in the copolymers (r_MDP = 2.41 ± 2.28 and r_VDF = 0.38 ± 0.21 at 120 °C). The Alfrey–Price Q and e values of the trifluoroallyl monomer MDP were calculated to be 0.024 (from Q_VDF = 0.008) or 0.046 (from Q_VDF = 0.015) and 0.70 (vs e_VDF = 0.40) or 0.80 (vs e_VDF = 0.50), respectively, indicating that MDP was an electron‐accepting monomer. The thermal properties of these fluorinated copolymers were also determined. Except for those containing a high amount of VDF, the copolymers were amorphous. Each showed one glass‐transition temperature (T_g) only, and with known laws of T_g's, T_g of the MDP homopolymer was assessed. It was compared to that obtained from the direct radical homopolymerization of MDP and discussed. Indeed, these two values were close (T_g = ?3 °C). Thermogravimetric analyses were performed, and they showed that the copolymers were rather thermostable because the thermal degradation occurred at 280 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3109–3121, 2003     

Synthesis and polymerization of fluorinated monomers bearing a reactive lateral group. XII. Copolymerization of vinylidene fluoride with 2,3,3‐trifluoroprop‐2‐enol

An improved synthesis of 2,3,3‐trifluoroprop‐2‐enol (FA1) and its copolymerization in solution with vinylidene fluoride (VDF, or 1,1‐difluoroethylene) initiated by tert‐butyl peroxypivalate are presented. A new synthesis of FA1, with NaH and lithium diisopropylamine as bases, from 2,2,3,3‐tetrafluoropropanol is described. A series of nine copolymerization reactions were investigated from initial [VDF]₀/[FA1]₀ molar ratios of 9.1/90.9 to 94.2/5.8. The copolymer compositions were calculated via ¹⁹F NMR spectroscopy. From the Tidwell–Mortimer method, the reactivity ratios of both comonomers were determined (r_FA1 = 0.11 ± 0.22 and r_VDF = 0.83 ± 0.77 at 50°C), and they showed an azeotropic point. Alfrey and Price's Q and e values of FA1 were calculated to be 0.0178 (from Q_VDF = 0.008), 0.039 (from Q_VDF = 0.015), and 0.275 (from Q_VDF = 0.036) and 2.74 (vs e_VDF = 1.20), 2.04 (vs e_VDF = 0.50), and 1.94 (vs e_VDF = 0.4), respectively, and they indicated that FA1 is an electron‐accepting monomer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3634–3643, 2002     

Ferrocene-containing polymers. II. Radiation-induced copolymerizations of ferrocenylmethyl methacrylate with styrene,methyl methacrylate,and ethyl acrylate

Ferrocenylmethyl methacrylate (FMMA) was copolymerized with styrene (St), methyl methacrylate (MMA), and ethyl acrylate (EA) in benzene solution at 25°C by γ radiation. The reactions proceeded by a free radical mechanism, and monomer reactivity ratios were derived by the Tidwell–Mortimer method for St(M₁)–FMMA(M₂), r₁ = 0.35 and r₂ = 0.46; for MMA(M₁–FMMA)(M₂), r₁ = 0.85 and r₂ = 1.36; for EA(M₁)–FMMA(M₂), r₁ = 0.36 and r₂ = 3.03. The Q and e values of FMMA determined from copolymerization with St were 0.97 and 0.55, respectively. Terpolymerization of a MMA–FMMA–EA system based on the Alfrey–Goldfinger equations was studied. This is a typical terpolymerization system in which reactivities of the monomers obey the Q–e scheme. Comparing the results obtained here with those previously reported for other monomers, we concluded that FMMA is one of the most highly reactive monomers among alkyl methacrylates.     

Synthesis and polymerization of fluorinated monomers bearing a reactive lateral group 13. Copolymerization of vinylidene fluoride with 2-benzoyloxypentafluoropropene

The synthesis of 2-benzoyloxypentafluoropropene (BPFP) and its radical copolymerization with vinylidene fluoride (VDF), initiated by tert-butyl peroxypivalate is presented. In a first step, the preparation of two monomers [F₂CC(CF₃)OCOR were R stands for CH₃ or C₆H₅] was attempted. In contrast to the acetoxy derivative that could not be isolated, the benzoyl monomer was purified and then copolymerized with VDF. A series of 11 copolymerization reactions was achieved starting from initial [VDF]₀/([BPFP]₀+[VDF]₀) molar ratios ranging from 19 to 99 mol%. The molar compositions of the obtained copolymers were assessed by means of ¹⁹F nuclear magnetic resonance spectroscopy. From the Tidwell and Mortimer method, this kinetics of copolymerization led to the determination of the reactivity ratios, r_i, of both comonomers (r_VDF=0.77±0.40 and r_BPFP=0.11±0.32). Hence, the Alfrey and Price equation enabled one to assess the Q and e parameters of BPFP as follows: 0.019 (from Q_VDF=0.008), 0.043 (from Q_VDF=0.015) or 0.182 (from Q_VDF=0.036) and 1.97 (vs e_VDF=0.40), 2.07 (vs e_VDF=0.50) or 2.77 (vs e_VDF=1.20), respectively. These Q-e parameters and r_i were compared to those of other fluoroalkenes and are discussed.     

Radical copolymerization of crotonyl compounds with styrene

The monomer reactivity ratios for the radical copolymerization of crotononitrile (CN), methyl crotonate (MC), and n-propenyl methyl ketone (PMK) with styrene (St) were measured at 60°C. in benzene and little penultimate unit effect was shown for these systems. The values obtained were: St–CN, r₁ = 24.0, r₂ = 0; St–MC, r₁ = 26.0, r₂ = 0.01; St–PMK, r₁ = 13.7, r₂ = 0.01. The rate of copolymerization and the viscosity of the copolymer decreased markedly as the molar fraction of the crotonyl compound in the monomer mixture increased. The Q–e values were also calculated to be as follows: CN, e = 1.13, Q = 0.009; MC, e = 0.36, Q = 0.015; PMK, e = 0.61, Q = 0.024. A linear relationship was obtained between the e values of the crotonyl compounds and their Hammett constants σ_m.     

Synthesis and polymerization of N-[1-(1-substituted-2-oxopropyl)]acrylamides and -methacrylamides. copolymerization of these monomers with styrene and substituent effects

The synthesis and polymerization of N-[1-(1-substituted-2-oxopropyl)]acrylamides and -methacrylamides are described. Seven new monomers were prepared by two kinds of synthetic procedure. The polymerization of these monomers was carried out. Monomer reactivity ratios in the polymerization of these monomers with styrene were determined and the Alfrey-Price Q and e values calculated. The effects of substituents on the reactivities in copolymerization were observed, and an interpretation of the results is given.     

Radical polymerization of muconic acid and ethyl muconate

Muconic acid (Mu-acid) was found to polymerize to trans-1,4-poly(Mu-acid) with the use of azobisisobutyronitrile (AIBN) as an initiator. Similarly, a muconic acid derivative, ethyl muconate (EMu), was readily polymerized through a trans-1,4 addition mechanism by the use of a radical or anionic catalyst, but did not polymerize when a cationic catalyst such as boron trifluoride etherate was used. Moreover, the copolymerization of Mu-acid and EMu with various comonomers such as styrene, acryronitrile, and 2-vinylpyridine was carried out and Q–e values of Mu-acid and EMu are discussed. These substituted diene monomers always polymerized through trans-1,4 addition with all catalysts and any comonomers.     

Complexed copolymerization of vinyl compounds with alkylaluminum halides

The monomer reactivity in the complexed copolymerization of vinyl compounds with alkylaluminum halides has been extensively surveyed. Equimolar copolymers were obtained in various combinations of monomers which are classified into two monomer groups, A and B. The group B monomers are conjugated vinyl compounds having nitrile or carbonyl groups in the conjugated position and form complexes with alkylaluminum halides. The group A monomers are donor monomers having low values, such as olefins, haloolefins, dienes, and unsaturated esters. These A monomers belong to the same group of monomers which give alternating copolymers in conventional radical copolymerization with maleic anhydride, SO₂, and so on. In addition the complexed copolymerization has the same specific characteristics as the conventional alternating copolymerization, i.e., high reactivities of allyl-resonance monomers and inner olefins and no transfer of halogen atom to the copolymers in CCl₄. These features suggest little or no participation of the A monomer radical. The Q-e scheme is also discussed in terms of the monomer reactivity. More than two monomers selected from groups A and B give multicomponent copolymers in which alternating sequential structures hold with respect to A and B. Anomalous mutual reactivities between two B monomers in the terpolymerization were observed and indicate that the nature of radical in the complexed copolymerization may be different from that expected by the Lewis-Mayo equation. The complexed radical mechanism previously proposed is discussed in connection with the specific behavior mentioned above.     

Reactivity ratios for copolymerization of vinyl chloride with 2-methylpentyl vinyl brassylate by computerized linearization

A computerized version of the Fineman-Ross linearization procedure was used to determine reactivity ratios for copolymerization of vinyl chloride (monomer 1) and 2-methylpentyl vinyl brassylate (monomer 2). From differential refractometry data for the products of low-conversion copolymerization, the procedure gave r₁ = 1.06 and r₂ = 0.234. The ratios computed from chlorine contents of the same products were r₁ = 1.10 and r₂ = 0.239. The polarity factor (e₂) and general monomer reactivity (Q₂) calculated for monomer 2 from these ratios were, respectively, ?0.95 to ?0.98 and 0.032–0.033. The interquartile range for the copolymerization of a mixture of 60% monomer 1 and 40% monomer 2 was 1.4%. These values suggest that from suitable proportions of reactants, sufficiently homogeneous distribution of monomers can be achieved in copolymers of vinyl chloride and 2-methylpentyl vinyl brassylate to offer the possibility of effective internal plasticization.     

N‐Vinylpyrrolidone and Ethoxyethyl Methacrylate Copolymer: Synthesis,Characterization and Reactivity Ratios

Free radical copolymerization of N‐vinyl‐2‐pyrrolidone with 2‐ethoxyethyl methacrylates was carried out with 2,2′‐azobisisobutyronotrile as an initiator in 1,4‐dioxane. The resulting copolymer was characterized by FTIR, H¹‐NMR and C¹³‐NMR spectroscopic techniques thermal properties of copolymer were determined by DSC and TGA. The reactivity ratios of the monomers were computed by the Fineman‐Rose (F‐R), Kelen‐Tudos (K‐T) and extended Kelen‐Tudos (EK‐T) method at lower conversion, using the data obtained from both FTIR and elemental analysis studies; the results are in good agreement with each other. The average reactivity ratio, Alfrey‐Price Q and e values were found to be r ₁=0.769, r ₂=0.266 and Q ₁=0.0859, e ₁=0.4508, respectively for NVP/EOEMA copolymer. The distribution of monomer sequence along the copolymer chain was calculated using a statistical method based on obtained reactivity ratio. The number average molecular weight and polydispersity were determined by GPC.     

Vinylhydroquinone. IV. Preparation and polymerization behavior of 2-methyl-5-vinylhydroquinone derivatives

As in the case of vinylhydroquinone (I), its alkyl-substituted derivative, 2-methyl-5-vinylhydroquinone (II) was found to copolymerize with methyl methacrylate by tri-n-butylborane in cyclohexanone at 30°C. II was prepared from the O,O′-bisether compound, 2-methyl-5-vinyl-O,O′-bis(1′-ethoxyethyl)hydroquinone (III). The monomer reactivity ratios (M₂ = II) were determined to be r₁ = 0.37 and r₂ = 0. No homopolymerization proceeded under the same conditions. Ordinary free-radical initiators, such as azobisisobutyronitrile and benzoyl peroxide, were not effective in the homopolymerization of II. 1:1 Copolymers were obtained from II and maleic anhydride by using tri-n-butylborane as an initiator. The copolymers exhibited no definite melting range and decomposed at 370–375°C endothermally (DSC). The polymerization behavior of III was also investigated. Although tri-n-butylborane did not initiate the homopolymerization of the monomer, azobisisobutyronitrile was capable of initiating the homopolymerization and copolymerization of III. The monomer reactivity ratios (M₁ = styrene) were determined to be r₁ = 0.83 and r₂ = 0.18. The ratios gave the following Q and e values; Q = 0.15 and e = ?2.2.     

Radical copolymerization of vinylidene fluoride with 1‐bromo‐2,2‐difluoroethylene

The radical copolymerization of vinylidene fluoride (VDF) and 1‐bromo‐2,2‐difluoroethylene (BDFE) in 1,1,1,3,3‐pentafluorobutane solution at different monomer molar ratios (ranging from 96/4 to 25/75 mol %) and initiated by tert‐butylperoxypivalate (TBPPI, mainly) is presented. Poly(VDF‐co‐BDFE) copolymers of various aspects (from white powders to yellow viscous liquids) were produced depending on the copolymer compositions. The microstructures of the obtained copolymers were characterized by ¹⁹F and ¹H NMR spectroscopy and by elementary analysis and these techniques enabled one to assess the contents of both comonomers in the produced copolymers. VDF was shown to be more incorporated in the copolymer than BDFE. From the extended Kelen and Tudos method, the kinetics of the radical copolymerization led to the determination of the reactivity ratios, r_i, of both comonomers (r_VDF = 1.20 ± 0.50 and r_{BDFE =} 0.40 ± 0.15 at 75 °C) showing that VDF is more reactive than BDFE. Alfrey‐Price's Q and e values of BDFE monomer were calculated to be 0.009 (from Q_VDF = 0.008) or 0.019 (from Q_VDF = 0.015) and +1.22 (vs. e_VDF = 0.40) or +1.37 (vs. e_VDF = 0.50), respectively, indicating that BDFE is an electron‐accepting monomer. Statistic cooligomers were produced with molar masses ranging from 1,800 to 5,500 g/mol (assessed by GPC with polystyrene standards). A further evidence of the successful copolymerization was shown by the selective reduction of bromine atoms in poly(VDF‐co‐BDFE) cooligomers that led to analog PVDF. The thermal properties of the poly(VDF‐co‐BDFE) cooligomers were also determined and those containing a high VDF amount exhibited a high thermal stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3964–3976, 2010.