Accuracy in the Isotope Dilution Mass Spectrometry of Uranium in Rubidium Uranium Sulphate Rb2U(SO4)3

Abstract

Problems encountered in the determination of uranium in rubidium uranium sulphate (Rb₂U(SO₄)₃) employing isotope dilution thermal ionisation mass spectrometry (ID-TIMS) are discussed. The positive bias of 0.2 to 0.3% in the determination of uranium in Rb₂U(SO₄)₃ by ID-TIMS with respect to the stoichiometric composition has been resolved by modifying the chemical exchange procedures. The concentration of uranium in Rb₂U(SO₄)₃ could be determined with an accuracy better than 0.1% employing the HClO₄ treatment for proper isotopic exchange between the spike and sample isotopes.     

Die Kristallstruktur von Cu7(OH)6(TeO3)2(SO4)2

The crystal structure of the new phase Cu₇(OH)₆(TeO₃)₂(SO₄)₂ [a=7.389 (1),b=7.638 (1),c=7.662 (2) Å, =75.17 (1), =75.90 (1), =84.19 (1)°;Z=1] was determined by direct methods andFourier summations from X-ray intensities, and was refined in space group P -C _i ¹ toR=0.039. As usual, the Cu(II) atoms are coordinated to four O atoms forming approximately a square with average Cu-O=1.96 (3) Å; one or two more distant O neighbours complete the coordination. The shape of the TeO₃ group is a rather clear-cut trigonal pyramid. A disorder was found for the SO₄ tetrahedra. The compound was synthesized under hydrothermal conditions [500 (10) K, saturation vapour pressure].

Herrn Prof. Dr.K. Komarek zum 60. Geburtstag gewidmet.     

Regioselective sulfation of trimethylsilyl cellulose using different SO3-complexes

Trimethylsilyl cellulose (DS_Si = 2.9) dissolved in dry tetrahydrofurane was reacted with SO₃-complexes of N,N-dimethylformamide, triethylamine, pyridine and ethyldiisopropylamine. Under the given reaction conditions, i.e. 25 °C, 24 h, 2.2 mol equivalent SO₃-complex, the SO₃ attacks the trimethylsilyl ether groups followed by the formation of sodium sulfate cellulose under sodium hydroxide work-up conditions. The regioselectivity of the sulfation is controlled by the complex partner of SO₃. Cellulose sulfates with preferred O-6 sulfation were obtained using SO₃-N,N-dimethylformamide. In case of SO₃-triethylamine, cellulose-2-sulfates could be prepared with good regioselectivity. Small residual amounts of silicon in the cellulose sulfates (0.1–0.2% w/w) can be quantified using inductively coupled plasma-optical emission spectroscopy (ICP-OES), and can be decreased up to 80% by heating (70 °C, 24 h) the polymers in vacuum.     

Enhanced Visible-Light-Driven Photocatalytic Activity by Fe(Ш)-Doped Graphitic C3N4

Fe(Ш)-doped graphitic carbon nitride (Fe(Ш)-CN) photocatalysts with various Fe(Ш) ions content were prepared via ultrasonic method. Detailed physical characterization indicated that Fe(Ш) ions had been successfully doped into the frame of g-C₃N₄. The photocatalytic activities were investigated, and methyl orange (MO) and tetracycline hydrochloride (TC) were used as the targeted pollutants. The as-prepared Fe(Ш)-CN materials exhibited higher photocatalytic activities than those of the pure g-C₃N₄. Specifically, the degradation rate of 2Fe(Ш)-CN under visible light was 2.06 times higher for MO and 2.65 times higher for TC than that of g-C₃N₄. The increased photocatalytic activities of Fe(Ш)-CN were mainly attributed to the enhanced light absorption ability and the rapid separation of photogenerated carriers. Moreover, the importance of active species during the reaction process was also explored, and the results indicated that •O₂⁻ is the main active species.     

Die Kristallstruktur von Dikalium-trikobalt(II)-dihydroxid-trisulfat-dihydrat,K2Co3(OH)2(SO4)3·2H2O

Crystals of K₂Co₃(OH)₂(SO₄)₃·2H₂O were synthesized under hydrothermal conditions. The crystal structure [a=17.945 (4) Å,b=7.557 (2) Å,c=9.760 (3) Å, space group Cmc2₁,Z=4] was determined by direct methods and refined with single crystal X-ray data. The H atoms were located byFourier syntheses. Their structural parameters were refined, too. The finalR-values areR=0.025 andR _w =0.028 (w=1/) for 612 reflections withF ₀>3 (F ₀). Both Co(II) atoms are octahedral six coordinated and form zigzag chains running parallel [001]. These chains are connected via sulfate groups to built up sheets parallel (100). The KO₉ polyhedron and one of the four hydrogen bonds link these sheets.

     

Synthesis and thermal investigation of Na2Cd(SO4)2·2H2O

The synthesis and thermal decomposition of Na₂(SO₄)₂·2H₂O in both air and nitrogen are described. The synthesis was performed by two different procedures, but in both cases the same product was obtained, corresponding to the general formula given above. The crystals obtained were investigated by methods of X-ray powder diffraction, and chemical and thermal analysis. The differences in thermal decomposition in air and nitrogen are discussed.     

Study of SO2 Removal Using Non-thermal Plasma Induced by Dielectric Barrier Discharge (DBD)

Dielectric Barrier Discharge (DBD) non-thermal plasma reactors built with three different dielectric materials for SO₂ removal were studied. The discharge characteristics of the three dielectrics, namely glass, Teflon, and glass fiber-based epoxy resin, were analyzed using Lissajous figures. From the Lissajous figures, the transition charge and energy deposition for each dielectric material were determined. When both the discharge characteristics and mechanical processability were considered, glass fiber-based epoxy resin was regarded as the best dielectric barrier among the three for DBD plasma reactors. A multi-cell DBD reactor built with glass fiber-based epoxy resin was used for treating air stream containing SO₂. SO₂ % removal decreased with increasing initial SO₂ concentration in a biphasic fashion. SO₂ removal was greatly improved by adding NH₃ into the air stream. Raising the relative humidity of the air stream also helped SO₂ removal. A SEM (scanning electron microscope) test illustrated some changes in surface morphology of Teflon and glass fiber-based epoxy resin.     

A new and convenient synthesis of phendiones oxidated by KBrO3/H2SO4 at room temperature

<正>A new method is described to synthesize phendione derivatives from 1,10-phenanthrolines using potassium bromate and 60% sulfuric acid as oxidant,which was easily applicable to scale-up.The reaction conditions are mild and the yields are excellent.The target compounds have been characterized by ~1H NMR,and IR.     

Interaction Between Two Similar Plane Parallel Double Layers for (NH4)2Fe(SO4)2 or (NH4)2Cu(SO4)2 Type Complex Salt Electrolytes at Positive Surface Potential

Interaction energies between two similar plane parallel double layers for (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ type complex salt electrolytes at positive surface potential were expanded in a power series and accurate numeral results were given for 0.1 ≤ y _e  < y ₀ ≤ 20. The general expressions were given for the interaction energies of A _ν +B _ν′ +C_ν? type complex salt electrolytes at y > 0. The interaction energies for simple salts NaCl, CaCl₂, Na₂SO₄, FeCl₃, Na₃PO₄, Mg₃(PO₄)₂, Al₂(SO₄)₃, and complex salts (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ at y ₀ = 1 were compared. There was hardly difference between these simple salts and this complex salt for the interaction energies. The interaction energy for complex salt (NH₄)₂Fe(SO₄)₂ was close to that for simple salt Na₃PO₄.

Supplemental files are available for this article. Go to the publisher's online edition of the Journal of Dispersion Science and Technology to view the free supplemental file.     

Metathesis polymerisation of phenylacetylene catalysed by (arene)Mo(CO)3 activated by electron acceptor chloranil

Phenylacetylene (PA) was polymerised by employing (arene)Mo(CO)₃/chloranil mixture as the catalyst. Preliminary kinetic studies of the polymerisation showed the presence of an induction period before commencement of polymerisation, attributable to the activation of the (arene)Mo(CO)₃ by chloranil through charge-transfer. It was shown that better control over polymer molecular weight and polydispersity was achieved with prior mixing of the metal carbonyl complex with the acceptor and by delaying the addition of the monomer. Polymerisation by metathesis route was ascertained by copolymerisation, sequential addition of monomers and also by end-capping reactions.     

Tribochemistry and kinetics of Al2(SO4)3·xH2O decomposition

The thermal decomposition of tribochemically activated Al₂(SO₄)₃·xH₂O was studied by TG, DTA and EMF methods. For some of the intermediate solids, X-ray diffraction and IR-spectroscopy were applied to learn more about the reaction mechanism. Thermal and EMF studies confirmed that, even after mechanical activation of Al₂(SO₄)₃·xH₂O, Al₂O(SO₄)₂ is formed as an intermediate. Isothermal kinetic experiments demonstrated that the thermochemical sulphurization of inactivated Al₂(SO₄)₃·xH₂O has an activation energy of 102.2 kJ·mol^?1 in the temperature range 850–890 K. The activation energy for activated Al₂(SO₄)₃·xH₂O in the range 850–890 K is 55.0 kJ·mol^?1. The time of thermal decomposition is almost halved when Al₂(SO₄)₃·xH₂O is activated mechanically. The results permit conclusions concerning the efficiency of the tribochemical activation of Al₂(SO₄)₃·xH₂O and the chemical and kinetic mechanisms of the desulphurization process.     

Synthesis of 3,4-Dihydropyrimidin-2(1H)-ones Using Ce(SO4)2-SiO2 as a Heterogeneous and Recyclable Catalyst

A simple and efficient synthesis of 3,4-dihydropyrimidinones or thiones is described, using silica-supported ceric sulfate [Ce(SO₄)₂-SiO₂] as a heterogeneous catalyst from an aldehyde, 1,3-dicarbonyl compound, and urea or thiourea at 110 °C under solvent-free conditions. Compared with the classical Biginelli reaction, this new method consistently has better yields, short reaction time, easy separation, and tolerance toward various functional groups.     

Investigation on The Thermal Properties of Fe2O(SO4)2. Part II

Fe₂O(SO₄)₂ is a secondary product of the decomposition of FeSO₄⋅H₂O. Part I of this study presents results on the synthesis of Fe₂O(SO₄)₂ in gaseous environment containing either low or high concentration of oxygen. In this paper the existence of differences between the structures of Fe₂O(SO₄)₂ and Fe₂(SO₄)₃ is proved on the basis of a detailed thermal study of Fe₂O(SO₄)₂ upon dynamic heating (differential thermal analysis) and upon isothermal heating (thermal-analytic balance) in various gaseous environments as well as by presenting kinetic data on the processes of decomposition of both compounds. This revised version was published online in July 2006 with corrections to the Cover Date.     

中性配合物Cr(acac)3、mer-和fac-[Cr(bza)3]的光学拆分

本文用新方法合成了Cr(bza)₃,改进了其mer-、fac-异构体的分离方法;增大了Cr(acac)₃的化学拆分量(1.5g)。试制了DBT(二苯甲酰-d-酒石酸)吸附型手性固定相(CSP),并成功地用于色谱拆分标题配合物的对映体,mer-[Cr(bza)₃]的部分拆分是首次发现的,其他配合物的拆分结果均优于文献方法。根据mer-[Cr(bza)₃)拆分流出液前、后组分的CD光谱,指定了其对映体绝对构型     

Synthese und Strukturanalyse von Na3SbSe3·3Sb2O3·0,5Sb(OH)3

Investigations in the system Sb-Se-NaOH-H₂O, hydrothermal conditions, yielded crystals of the compound Na₃SbSe₃·3Sb₂O₃·0,5Sb(OH)₃. The structure of this compound (a=14.40 Å,c=5.568 Å; space group P 6₃-C ₆ ⁶ ;Z=2) was determined from 985 independent X-ray intensities — collected on an automaticWeissenberg type diffractometer — by thePatterson method and refined by the least squares method toR=8.3% (with -weighting 5.9%). The structure consists of SbO₃ pyramids which are connected via common oxygen corners to tubes parallel [001]. These tubes and SbSe₃ pyramids are combined by Na atoms to a framework. The Sb(OH)₃ groups are statistically located within the channels of the tubes.

     

Decomposition of P2S2N4(Si(CH3)3)4A12C14 as Studied by FT-Raman and Quantum Chemistry Means

The dimeric title compound decomposes upon heating to give the monomer and desulphurized monomer as shown by FT-Raman and quantum chemical means.     

Synthesis, structure and physical properties of LnNi(Sn,Sb)3 (Ln=Pr, Nd, Sm, Gd, Tb)

Five new analogues of the β-CeNiSb₃ family have been synthesized and found to be LnNi(Sn,Sb)₃ and isostructural to the previously reported β-CeNiSb₃. LnNi(Sn,Sb)₃ (Ln=Pr, Nd, Sm, Gd, or Tb) crystallizes in the orthorhombic space group, Pbcm, with lattice parameters of a∼12.9 Å, b∼6.1 Å, c∼12.0 Å. The structure consists of layers of nearly square nets of X (X=Sn/Sb) atoms and highly distorted NiX₆ octahedra. Lanthanide atoms are located between layers of X and NiX₆ octahedra. All analogues are metallic and experimental effective magnetic moments are in agreement with the respective Ln³⁺ calculated moments.     

Preparation of ethyl levulinate from wheat stalk over Zr(SO4)2/SiO2

A series of Zr(SO₄)₂/SiO₂ solid acid catalysts with different Zr(SO₄)₂ loadings were prepared by water-soluble-impregnation method at room temperature. Then, the prepared catalysts were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy and energy-dispersive X-ray spectrum, X-ray diffraction, adsorption/desorption of N₂, and temperature-programmed desorption of NH₃. The results showed that the active component Zr(SO₄)₂ was successfully adhered to the mesoporous SiO₂, and the acid amount of Zr(SO₄)₂/SiO₂ increased with the increasing of the Zr(SO₄)₂ loadings. Finally, the wheat stalk was used as raw material and depolymerized over Zr(SO₄)₂/SiO₂ to produce ethyl levulinate (EL). The reaction mixture was separated and purified by filtration and vacuum distillation. The kinetic characteristics and the reaction pathway were also studied. A comparative study showed that 20 wt.% Zr(SO₄)₂/SiO₂ exhibited higher catalytic activity. When reaction temperature, time, catalyst dosage and Zr(SO₄)₂ loadings were 190 °C, 50 min, 20 wt.% and 30 wt.%, the EL yield reached a maximum of 17.14%. The relative content of EL exceeded 90% after three steps of distillation.     

Raman spectroscopic study of K3H(SO4)2 (phases I and II) single crystals

A Raman study of K₃H(SO₄)₂ as a function of temperature reveals that this compound undergoes a phase transition at T_c = 483 K prior to the decomposition at 508 K.     

Enthalpies of crystallization of equilibrium solid phases occurring in the system K2SO4-(NH4)2SO4-H2O at 298.15 K

The concentration dependences of the differential enthalpies of solution were measured along several crystallization paths in the above-mentioned system, and the enthalpies of crystallization of mixed crystals occurring as a stable solid phase in the system were calculated on this basis. The obtained results confirmed the existence of a region of breaking continuity in the equilibrium solid phases.

---

Zusammenfassung Für die obengennanten Systeme wurden, mehrere Kristallisationsradien entlang, die Messungen der Konzentrationsabhängigkeiten durchgeführt, die es unter differentiellen Lösungsenthalpien gibt. Auf dieses Grundlage wurden die Kristallisationenthalpien von Mischkristallen, die als stabile feste Phase vorkommen, bestimmt.Die erreichten Ergebnisse bestätigen die Tatsache, daß ein unterbrochenes Gebiet in den gleichgewichten festen Phasen vorkommt.