Synthesis of 3,3‐Dimethyl‐4‐chromanones: Improved Procedures Without Ring Opening

A procedure for the 3,3‐dimethylation of 4‐chromanones under basic conditions was improved; the by‐product from chromanone ring opening was isolated and its structure was determined.     

Synthesis of Biodegradable Hydrogel by Radical Ring‐Opening Polymerization of 2‐Methylene‐1,3,6‐Trioxocane

2‐Methylene‐1,3,6‐trioxocane (MTC), maleic anhydride (MA), and poly(ethylene glycol diacrylate) 400 (PEGD) or divinyl adipate (DVA) were terpolymerized in the presence of a radical initiator. Though the obtained gels did not absorb deionized water, the gels could absorb deionized water and saline after hydrolyzing the MA carboxylate anhydride functionality. The absorbing ratios of deionized water and saline were high. The biodegradability of the hydrogels after hydrolysis was found to be good by a biochemical oxygen demand (BOD)‐tester using soil.     

Optimized Procedure for the Synthesis of 6‐Azido‐6‐deoxy‐galactopyranosides From 6‐O‐Tosyl‐galactopyranosides

The reaction conditions for preparation of 6‐azido‐6‐deoxy‐glycoside remain elusive, although there are many successful cases in hand. After careful investigation of the reaction conditions, a practical procedure for the preparation of 6‐azido‐6‐deoxy‐galactopyranoside derivatives was demonstrated.     

Synthesis of Novel Anellated Pyranosides as Precursors of C‐Nucleoside Analogues Using Isopropyl 6‐O‐Acetyl‐3‐deoxy‐4‐S‐ethyl‐4‐thio‐α‐D‐threo‐hexopyranosid‐2‐ulose

Abstract

Isopropyl 6‐O‐acetyl‐3‐deoxy‐4‐S‐ethyl‐4‐thio‐α‐D‐threo‐hexopyranosid‐2‐ulose (3) was converted to the corresponding 3‐[bis(methylthio)methylene] derivative 4 with a push–pull activated C–C double bond. Treatment of 4 with hydrazine and methylhydrazine afforded the pyrano[3,4‐c]pyrazol‐5‐ylmethyl acetates 5a and 5b, respectively. Desulfurization of compound 4 with sodium boron hydride yielded the 3‐[(methylthio)methylene]hexopyranosid‐2‐ulose 7. Compound 7 was reacted with amines to furnish 3‐aminomethylene‐hexopyranosid‐2‐uloses 8, 9. Reaction of 7 with hydrazine hydrate, hydrazines, hydroxylamine, and benzamidine afforded the pyrazolo, isoxazalo, and pyrimido anellated pyranosides (10–13).     

Efficient Synthesis of 2‐Aminothiazole‐4‐phenyl‐5‐acetamides via the Open Chain Tautomers of γ‐Keto Amides

A simple and efficient method is described for the synthesis of new functionalized 2‐aminothiazoles, the 2‐aminothiazole‐4‐phenyl‐5‐acetamides 5, in 67–96% yields based on an application of the Hantzsch synthesis. The method involves the reaction of thiourea with 3‐benzoyl‐3‐bromo‐propionamides 4 prepared from the corresponding 3‐benzoylpropionamides 3. The tautomeric structure of the γ‐keto amides 3 and 6 is directly related to the present study, because 2‐aminothiazoles 5 are readily obtained from the corresponding open chain γ‐keto amides 3.     

Synthesis of Maleated Ionomers via Ring‐Opening Reaction of Epoxidized (Styrene‐Butadiene‐Styrene) Triblock Copolymer with Potassium Hydrogen Maleate and Study of their Properties

A novel method for synthesizing maleated ionomer of (styrene‐butadiene‐styrene) triblock copolymer (SBS) from epoxidized SBS was developed. The epoxidized SBS was prepared via epoxidation of SBS with performic acid formed in situ by 30% H₂O₂ and formic acid in cyclohexane in the presence of polyethylene glycol 600 as a phase transfer catalyst. The maleated ionomer was obtained by a ring‐opening reaction of the epoxidized SBS solution with an aqueous solution of potassium hydrogen maleate. The optimum conditions for the ring‐opening reaction and some properties of the ionomers were studied. It is necessary to use phase transfer catalyst, ring‐opening catalyst and a pH regulator (dipotassium maleate) for obtaining the epoxy group conversion over 90%. The product was characterized by FTIR spectrophotometry and transmission electron microcroscopy (TEM) to be an ionomer with domains of maleate ionic groups. With increasing ionic groups, the water absorbency and the dilute solution viscosity of the ionomer increase, whereas the oil absorbency decreases. The tensile strength and ultimate elongation of ionomers increase with ionic group content and are higher than those of the original SBS without using any ionic plasticizer, which is usually used with the sulfonated ionomer. The ionomers with 1.2–1.7 mmol ionic groups/g exhibit optimum mechanical properties and behave as thermoplastic elastomers. The ionomer can be used as a compatibilizer for the blends of SBS with oil resistant chlorohydrin rubber (CHR). Addition of 3 wt% ionomer to the blend can increase the tensile strength and ultimate elongation of the blend optimally. The compatibility of the blends enhanced by adding the ionomer was shown by scanning electron microscopy (SEM). The blend of equal weight of SBS and CHR compatibilized by the ionomer behaves as a toluene resistant thermoplastic elastomer.     

Synthesis of 4‐Methyl Pyrrolo[2,3‐b]xanthone,a Novel Ring System

A short, high yielding synthesis of a novel substituted pyrrolo[2,3-b]xanthone has been developed. The synthesis begins with a copper catalyzed Ullmann coupling reaction followed by and intramolecular Friedel-Crafts acylation reaction to establish the xanthone core structure. After a regioselective nitration, a Leimgruber-Batcho synthesis establishes the final pyrrole ring.     

Synthesis of 4‐Substituted Piperidines via a Mild and Scalable Two‐Step Cu2O‐Mediated Decarboxylation of Cyanoesters

A four‐step, high‐yielding, kilogram‐scale protocol to prepare aldehyde 5 is reported. The key reaction is a mild, two‐step Cu₂O‐mediated decarboxylation of cyanoester 3 that proceeds in excellent yield. The general applicability of this methodology has also been explored.     

An Efficient Synthesis of Derivatives of 2‐Acetamido‐4‐amino‐2,4,6‐trideoxy‐D‐galactopyranose

Abstract

Methyl 2‐acetamido‐4‐amino‐2,4,6‐trideoxy‐α‐D‐galactopyranoside (10) was synthesized from D‐glucosamine hydrochloride in eight steps in an overall yield of 31%. Key steps include the selective benzoylation at O‐3 of methyl 2‐acetamido‐2,6‐dideoxy‐α‐D‐glucopyranoside in 89% yield and the subsequent Mitsunobu reaction using diphenylphosphoryl azide as the azide source which proceeded in 92% yield. Di‐ and mono‐benzyloxycarbonyl derivatives of 10 were also prepared.     

Synthesis of 4‐Alkyl‐1(2H)‐phthalazinones and 4‐Alkyl‐2,3‐benzoxazin‐1‐ones via Ring Cleavage of 3‐Substituted N‐Alkylated‐3‐hydroxyisoindolin‐1‐ones

Abstract

N‐Alkyl (Me, Et, i‐Pr, t‐Bu)‐substituted phthalimdes 5a–d were easily transformed to 1(2H)‐phthalazinones 8d–i and 2,3‐benzoxazin‐1‐ones 9d, f, and j via a one‐pot addition–decyclization–cyclocondensation process.     

Reductive Ring‐Opening Reaction of 2,3‐Epoxy‐1,4‐butanediones with SbCl3‐Bu4NI in the Presence of Na2S2O3·5H2O

1,4‐Disubstituted 2,3‐epoxy‐1,4‐butanediones were converted to 1,4‐disubstituted 2‐hydroxy‐1,4‐butanediones with SbCl₃‐Bu₄NI in the presence of Na₂S₂O₃ · 5H₂O. The ring opening of terminal epoxides can also be accomplished to afford the corresponding haloalcohol with SbCl₃ and tetrabutylammonium halides, Bu₄NX (X=Cl, Br, I) under the same reaction conditions.     

Synthesis of Substituted 1‐\C\‐Phenyl‐D‐Tetritols and 1‐C‐(1H‐Pyrazol‐4‐yl)‐D‐tetritols by Ring Transformation of 2‐Formylglycals

Abstract

2‐Formylglycals 1a,b reacted with dialkyl 3‐oxoglutarates in the presence of base to furnish the 5‐[(1R,2R(S),3R)‐1,2,4‐tris(benzyloxy)‐3‐hydroxy‐butyl]‐2‐hydroxy‐isophthalic acid dialkyl esters 2a–d. Treatment of 1a,b with hydrazine derivatives afforded the substituted 1,2,4‐tri‐O‐benzyl‐1C‐(1H‐pyrazol‐4‐yl)‐D‐tetritols 5a–d. Deprotection of 5a,b was achieved with Pd/H₂ to yield the 1C‐(1‐methyl‐1H‐pyrazol‐4‐yl)‐D‐tetritols 6a,b.     

Synthesis of Highly Functionalized Piperidines via a Tandem Retro‐Michael‐[2 + 3]‐Cycloaddition

The highly functionalized piperidine 5a was synthesized in only 4 steps starting from ribose using a tandem retro‐Michael‐[2 + 3]‐cycloaddition process as the key transformation. The versatility of the tandem retro‐Michael‐[2 + 3]‐cycloaddition was demonstrated by the synthesis of novel piperidines 5b, 5c, 11 and 16.     

Synthesis of C‐Nucleoside Analogues Starting from 1‐(Methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl)‐4‐phenyl‐but‐3‐yn‐2‐one

Abstract

1‐(Methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl)‐4‐phenyl‐but‐3‐yn‐2‐one (4) was synthesized by the reaction of (methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl)ethanal (2) with lithium phenylethynide and following oxidation. Compound 4 and hydrazine hydrate provided the 3(5)‐(methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl‐methyl)‐5(3)‐phenyl‐1H‐pyrazole (5). The reactions of 4 with amidinium salts and a S‐methyl‐isothiouronium salt, respectively, furnished the pyrimidine C‐nucleoside analogues 6a–6c. Treatment of 4 with 2‐aminobenzimidazole afforded 2‐(methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐ylmethyl)‐4‐phenyl‐benzo [4,5]imidazo[1,2‐a]pyrimidine (7a). Compound 4 and sodium azide yielded 2‐(methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl)‐1‐[5(4)‐phenyl‐1H(2H)‐1,2,3‐triazole‐4(5)‐yl]ethanone (8).     

Synthesis of 6-aryl-2′-deoxyuridine nucleosides via a Liebeskind cross-coupling methodology

Hitherto, the synthesis of 6-substituted 2′-deoxyuridine nucleoside analogues via Pd-catalyzed Suzuki cross-coupling reaction was hampered by the instability of the TIPDS-protected precursor 6-iodo-2′-deoxyuridine 1 in alkaline media due to cleavage of the glycosidic bond. Herein, the successful application of the Liebeskind reaction under base-free conditions is reported. This method comprises of the stoichiometric use of copper thiophene carboxylate (CuTC) as co-reagent at slightly elevated temperatures. Fluoride-mediated desilylation and Yoshikawa-phosphorylation afforded the nucleotide analogues 4b–c, 4e, and 4i.     

A New Synthesis of 5,8‐Dimethyl‐2‐tetralone—A Potential Intermediate for the Synthesis of Ring‐A Aromatic Sesquiterpenes. Novel Transformation During Acetoxylation of 5,8‐Dimethyldihydronapthalene

Abstract

An efficient synthesis of 5,8‐dimethyl‐2‐tetralone 4 starting from 5,8‐dimethyl‐1‐tetralone 2 is described. It was converted into the unsaturated derivative 3, which on epoxidation followed by acid hydrolysis yielded tetralone 4. Acetoxylation of 3 with manganese(III) acetate and potassium bromide afforded dimethylnaphthalene 8 and derivative 9.     

Synthesis of O‐β‐D‐Glucopyranosides of 7‐Hydroxy‐3‐(imidazol‐2‐yl)‐4H‐chromen‐4‐ones

The 7‐hydroxy‐3‐formyl‐4H‐chromen‐4‐one 1 reacted with various cyclic 1,2‐dicarbonyl compounds in the presence of ammonium acetate to furnish 7‐hydroxy‐3‐([4,5‐fused] imidazol‐2‐yl)‐4H‐chromen‐4‐ones 2a–f, which on glucosylation with α‐acetobromoglucose affords 2,3,4,6‐tetra‐O‐acetyl‐β‐D‐glucopyranosyloxy‐3‐([4,5‐fused] imidazol‐2‐yl)‐4H‐chromen‐4‐ones 3a–f. 7‐O‐β‐D‐Glucopyranosyloxy‐3‐([4,5‐fused] imidazol‐2‐yl)‐4H‐chromen‐4‐ones 4a–f were prepared by deacetylation with anhydrous zinc acetate in absolute methanol. The structure of these new O‐β‐D‐glucosides was established on the basis of chemical, elemental, and spectral analysis. These compounds were evaluated for their in vitro biological activity.

     

Synthesis of a Novel Dispiroheterocyclic Framework via the Regioselective 1,3‐Dipolar Cycloaddition Reaction of Azomethine Ylides

2‐Arylidene‐1,3‐indanediones undergo regioselective 1,3‐dipolar cycloaddition with the azomethine ylide generated from acenaphthenequinone and sarcosine to afford a rare class of complex dispiropyrrolidines in good yield. Single‐crystal X‐ray crystal analysis of one of the products confirms the structure and regiochemistry of the cycloaddition.     

Novel Synthesis of Optically Active 2‐Ethylhexanoic Acid, 2‐Ethylhexanol,and 2‐Ethylhexylamine via the Asymmetric Favorskii Rearrangement

The asymmetric Favorskii rearrangement of optically active α‐haloketones, which are easily prepared from chiral menthyl‐4‐toluenesulfoxide in several steps using primary or secondary amines, yields their corresponding secondary or tertiary chiral amides. The secondary chiral amides were converted to acids or amines using acylation followed by hydrolysis or reduction. In addition, the tertiary amides were directly reduced to alcohol with Super‐Hydride^®.     

One‐Step Synthesis of Multiphase Block Copolymers via Simultaneus Free Radical and Ring Opening Polymerization Using Poly(ethylene oxide) Possessing Azo Group

Multiphase block copolymers having the structure of poly(?‐caprolacton‐b‐etyhlene glycol‐b‐styrene‐b‐ethylene glycol‐b‐?‐caprolacton) were synthesized from poly(ethylene oxide) possesing azo group in the main chain by the combination of free radical polymerization (FRP) of styrene (S) and ring opening polymerization (ROP) of ?‐caprolacton (?‐CL) in one‐step. The block copolymers were characterized ¹H‐NMR and FT‐IR spectroscopy and gel permeation chromatography (GPC). ¹H‐NMR and FT‐IR spectroscopy and GPC studies of the obtained polymers indicate that multiphase block copolymers easily formed as a result of combination FRP and ROP in one‐step.