Polymerization initiated by an electron donor–acceptor complex. Part IV. Kinetic study of polymerization of methyl methacrylate initiated by the charge-transfer complex consisting of poly-2-vinylpyridine and liquid sulfur dioxide

A kinetic study has been made of the polymerization of methyl methacrylate (MMA) initiated by a charge-transfer complex of poly-2-vinylpyridine (electron donor) and liquid sulfur dioxide (acceptor) in the presence of carbon tetrachloride. It is concluded that the polymerization proceeds through free-radical intermediates, as with the pyridine-liquid sulfur dioxide complex system. The association constants K of acceptor and polymer electron donors which range widely in their molecular weight were determined spectrophotometrically, and it has been found that both K and overall rate of polymerization R_p of MMA decrease with increasing molecular weight of polymer donor; contrary to this, molecular weight of PMMA formed increases with increasing molecular weight of the polymer donor. Other kinetic behaviors was essentially the same as in the pyridine–liquid sulfur dioxide system, i.e., R_p is proportional to the square root of the concentration of the complex and to the 3/2-order of the monomer concentration; R_p is clearly sensitive to the carbon tetrachloride concentration at low concentration of carbon tetrachloride, but for a higher concentration it is practically independent of the carbon tetrachloride concentration. It has been deduced from a kinetic mechanism for the initiation that a primary radical may be produced from the reduction of carbon tetrachloride by an associated complex consisting of liquid sulfur dioxide–polymer donor and the monomer.     

Radical [n + 1] annulations with sulfur dioxide

[reaction: see text] A new methodology for [n + 1] radical annulation using sulfur dioxide as a geminal radical acceptor/donor is presented. This methodology provides a novel route to the formation of five-, six-, and seven-membered cyclic sulfones utilizing a radical chain mechanism under very mild conditions.     

Theory of excitation energy transfer regarded as nonadiabatic transition 2: Calculational evidence of nonadiabatic interaction causing intermolecular excitation energy transfer

To clarify whether the excitation energy transfer from a donor molecule or aggregate to a remote acceptor molecule or aggregate can be caused by nonadiabatic interaction as expected in our previous studies 4 ; 5 , we carried out ab initio calculations for three donor–acceptor systems. Even when the acceptor is separated from the donor by 15 Å, it was found that nonadiabatic coupling elements have moderately large values in the nuclear configuration region where the potential energy surfaces at two excited states for the donor–acceptor system are close to each other; otherwise, the conical intersection between the two excited‐state potential energy surfaces appears. In addition, it was found that the adiabatic approximation for the donor–acceptor system holds in the nuclear configuration region in which the initial and final wave packets in the process of the excitation energy transfer lie. These findings lead to the conclusion that the excitation energy transfer between two remote molecules or aggregates can be caused by the nonadiabatic interaction. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 36–43, 2003     

离子色谱法测定气体中痕量二氧化硫

建立了测定气体中痕量二氧化硫的离子色谱法。采用氢氧化钠–过氧化氢溶液为吸收液,将气体样品中痕量二氧化硫转化为硫酸根离子,以离子色谱法测定硫酸根离子,从而得到气体中二氧化硫含量。二氧化硫气体含量在1~100μL/L范围内与色谱峰面积线性关系良好,相关系数为0.999 9。二氧化硫的检出限为0.1μg/L,测量结果的重复性小于2%(n=6),测定标准样品的回收率在98.1%~99.6%之间,准确度优于对照方法。     

Effect of Side Chains on Charge Transfer in Quaterthiophene-Naphthalene Diimide Based Donor-Bridge-Acceptor Dyads

We have probed the effect of side chains on the charge transfer dynamics in dyads containing quaterthiophene (QT) donor and naphthalene diimide (NDI) acceptor. The donor and the acceptor are covalently linked using a flexible linker. Four dyads (1–4) were synthesized with the quaterthiophene bearing hexyl side chain and the naphthalene diimide bearing hydrocarbon, fluorocarbon, branched or polar side chains. The UV-Vis spectra for these dyads showed the existence of a donor-acceptor complex. The time-resolved fluorescence (TRF) decay studies show a rapid quenching of fluorescence in all the dyads upon excitation of the donor. We found that the side chains on the NDI did not alter the quenching rates in solution.     

Design and Synthesis of Aviram–Ratner‐Type Dyads and Rectification Studies in Langmuir–Blodgett (LB) Films

The design and synthesis of Aviram–Ratner‐type molecular rectifiers, featuring an anilino‐substituted extended tetracyanoquinodimethane (exTCNQ) acceptor, covalently linked by the σ‐spacer bicyclo[2.2.2]octane (BCO) to a tetrathiafulvalene (TTF) donor moiety, are described. The rigid BCO spacer keeps the TTF donor and exTCNQ acceptor moieties apart, as demonstrated by X‐ray analysis. The photophysical properties of the TTF‐BCO‐exTCNQ dyads were investigated by UV/Vis and EPR spectroscopy, electrochemical studies, and theoretical calculations. Langmuir–Blodgett films were prepared and used in the fabrication and electrical studies of junction devices. One dyad showed the asymmetric current–voltage (I–V) curve characteristic for rectification, unlike control compounds containing the TTF unit but not the exTCNQ moiety or comprising the exTCNQ acceptor moiety but lacking the donor TTF part, which both gave symmetric I–V curves. The direction of the observed rectification indicated that the preferred electron current flows from the exTCNQ acceptor to the TTF donor.     

A novel fluorescent sensor for Sn4+ detection: Dark resonance energy transfer from silole to rhodamine

A novel dark resonance energy transfer (DRET) off–on cassette SR1 was constructed by coupling a silole donor with a rhodamine acceptor. Due to the intramolecular rotations of the phenyl rings, the silole fluorophore served as a dark donor in solution state and fluorescence leakage from the donor emission could be avoided. Binding with Sn⁴⁺ ion induced the ring‐opening of the rhodamine acceptor, thus increase the overlapping between the emission spectra of the donor and absorption spectra of the acceptor. DRET was turned on and energy was transferred from the silole donor to the rhodamine acceptor. Emission from the rhodamine acceptor was achieved with a large Stokes shift up to 198 nm. The sensor showed good sensitivity and selectivity towards Sn⁴⁺ to other metal ions in methanol aqueous solution through the formation of a 1:1 complex between SR1 and Sn⁴⁺. This research provides a new approach for the development of rhodamine‐based sensors towards metal ions with large Stokes shifts.     

meso‐Tritolylcorrole‐Functionalized Single‐walled Carbon Nanotube Donor?Acceptor Nanocomposites for NO2 Detection

meso‐Tritolylcorrole‐functionalized single‐walled carbon nanotubes (TTC‐SWNT) donor‐acceptor (D–A) heterojunction nanocomposite film was fabricated on a polycarbonate membrane through filtration and non‐covalent functionalization, providing an excellent sensing platform with low‐cost, high flexibility and good gas accessibility. The TTC‐SWNTs nanocomposite displays a fast and sensitive response to nitrogen dioxide with a limit of detection of 10 ppb (S/N=3). The sensing response was significantly amplified compared to the unmodified one, which was ascribed to a D–A heterojunction at the interface between electron donor TTC and electron acceptor SWNTs. This study provides a simple route to fabricate low‐cost and highly sensitive donor‐acceptor nanocomposite‐based gas sensors.     

Regulating Charge-Transfer in Conjugated Microporous Polymers for Photocatalytic Hydrogen Evolution

Bandgap engineering in donor–acceptor conjugated microporous polymers (CMPs) is a potential way to increase the solar-energy harvesting towards photochemical water splitting. Here, the design and synthesis of a series of donor–acceptor CMPs [tetraphenylethylene (TPE) and 9-fluorenone (F) as the donor and the acceptor, respectively], F_0.1CMP , F_0.5CMP , and F_2.0CMP , are reported. These CMPs exhibited tunable bandgaps and photocatalytic hydrogen evolution from water. The donor–acceptor CMPs exhibited also intramolecular charge-transfer (ICT) absorption in the visible region (λ_max=480 nm) and their bandgap was finely tuned from 2.8 to 2.1 eV by increasing the 9-fluorenone content. Interestingly, they also showed emissions in the 540–580 nm range assisted by the energy transfer from the other TPE segments (not involved in charge-transfer interactions), as evidenced from fluorescence lifetime decay analysis. By increasing the 9-fluorenone content the emission color of the polymer was also tuned from green to red. Photocatalytic activities of the donor–acceptor CMPs ( F_0.1CMP , F_0.5CMP , and F_2.0CMP ) are greatly enhanced compared to the 9-fluorenone free polymer ( F_0.0CMP ), which is essentially due to improved visible-light absorption and low bandgap of donor–acceptor CMPs. Among all the polymers F_0.5CMP with an optimum bandgap (2.3 eV) showed the highest H₂ evolution under visible-light irradiation. Moreover, all polymers showed excellent dispersibility in organic solvents and easy coated on the solid substrates.     

Terpolymerization of sulfur dioxide or maleic anhydride with unsaturated compounds under ultraviolet irradiation

The effect of ultraviolet irradiation on the terpolymerization was investigated. In the terpolymerizations of sulfur dioxide–butene-1–acrylonitrile, sulfur dioxide–butene-1–n-butyl acrylate, and maleic anhydride–allyl chloride–acrylonitrile systems, the composition of the terpolymers prepared under ultraviolet irradiation was different from those prepared in the dark. The unit content of sulfur dioxide and butene-1 or of maleic anhydride and allyl chloride in the terpolymer increased under ultraviolet irradiation. The nature of the growing end under ultraviolet irradiation is supposed to be the same as that of the dark polymerization on the basis of the same solvent effect on the terpolymer composition, the rate of polymerization and the molecular weight of polymer. The experimental results suggest that the complex between sulfur dioxide and butene-1 or maleic anhydride and allyl chloride might be excited by ultraviolet light and the excited complex may participate in the terpolymerization.     

Effect of ultraviolet irradiation on terpolymerization of sulfur dioxide with two unsaturated compounds

The terpolymerization of sulfur dioxide, butene-1 and acrylonitrile affords terpolymers containing equimolar amounts of sulfur dioxide and butene-1 with various acrylonitrile contents. Ultraviolet irradiation was found to accelerate the polymerization and decrease the acrylonitrile content in the polymer. This fact is interpreted by a mechanism through a copolymerization of sulfur dioxide–butene-1 complex and acrylonitrile, whereby the polymerizability of sulfur dioxide–butene-1 complexed monomer may be accelerated by ultraviolet light. In fact, a binary system of sulfur dioxide and butene-1 was found to be accelerated by ultraviolet irradiation, and it affords a maximum rate at a 1:1 composition of feed monomer. Ultraviolet light of 250–300 mμ wavelength is effective for the initiation and the propagation. This may be ascribed to the ultraviolet absorption of the sulfur dioxide–butene-1 complex. The temperature coefficient was measured in both dark and ultraviolet irradiation reactions. The ultraviolet irradiation enhances the reactivity of sulfur dioxide–butene-1 complexed monomer at low temperature. In the terpolymerization with sulfur dioxide, isoprene, and butadiene, the ratio of isoprene and butadiene in the terpolymer was not altered by ultraviolet irradiation because both monomers from complexes with sulfur dioxide, perhaps having the same temperature coefficient for the polymerization.     

Conformer-independent ureidoimidazole motifs--tools to probe conformational and tautomeric effects on the molecular recognition of triply hydrogen-bonded heterodimers

Linear arrays of hydrogen bonds are useful for the reversible assembly of “stimuli‐responsive” supramolecular materials. There is thus an ongoing requirement for easy‐to‐synthesise motifs that are capable of presenting hydrogen‐bonding functionality in a predictable manner, such that high‐affinity and high‐fidelity recognition occurs. The design of linear arrays is made challenging as a consequence of their ability to adopt multiple conformational and tautomeric configurations; with each additional hydrogen‐bonding heteroatom added to an array, the available tautomeric and conformational space increases and it can be difficult to anticipate where unproductive conformers/tautomers will arise. This paper describes a detailed study on the complementary ureidoimidazole donor–donor–acceptor (DDA) array ( 1 ) and amidoisocytosine donor–acceptor–acceptor (DAA) array ( 2 ). A specific feature of 1 is that two degenerate, intramolecular hydrogen‐bonded conformations are postulated, both of which present a DDA array that is complementary to appropriate DAA partners. 1D and 2D ¹H NMR spectroscopy, isothermal titration calorimetry, and ab initio structure calculations confirm 1 interacts with 2 (K_a≈33000 M ^?1 in CDCl₃) in a conformer‐independent fashion driven by enthalpy. Comparison of the binding behaviour of 1 with hexylamidocytosine ( 4 ) and amidonaphthyridine ( 5 ) provides insight on the role that intramolecular hydrogen‐bonding plays in mediating affinity towards DAA partners.     

Theory of electron transfer in donor–acceptor pairs

The wave functions of donor–acceptor pairs before and after electron transfer are written as a product of the electron-vibrational wave functions of the donor and acceptor with allowance for the change in the number of electrons on these particles by one after transition. In this approximation, the energy of the initial state is represented as a sum of the electron-vibrational levels of the donor and acceptor and that of the final state as a sum of donor cation and acceptor anion levels. Formulas for the electron transfer probability of symmetrical and nonsymmetrical donor–acceptor pairs have been derived that express the dependence of this process on the ionization potential difference of the donor and the electron affinity of the acceptor, on the vibrational frequencies of these particles, and on temperature.     

以芳香硫醚为桥链的三体化合物的荧光分子开关性能

将一些发色团分子组装成具有特定功能的分子器件,是近年来随超分子化学和分子信息科学兴起而十分活跃的领域［１］,其中具有逻辑功能的光控开关器件是下一代分子计算机的核心,它们可在分子水平实现信息的存储和数据的处理、传输［２］．国内外这方面的研究主要有顺反异...     

Pyridine coordination to manganese(III) porphyrins: The effect of multiple functional substitution in porphyrin

To synthesize donor–acceptor complexes exhibiting biological activity, the reaction of (2,3,7,8,12,13,17,18-octaalkylporphinato)manganese(III) containing axial acetate and chloride ions with pyridine has been quantitatively studied. In all cases, equilibrium is established instantaneously to give 1 : 1 donor–acceptor complexes. The key spectral characteristics and stability parameters have been obtained for donor–acceptor dyads. Multiple functional substitution of the porphyrin macroheterocycle can be used to control the properties of porphyrins and dyads based on them.     

Hydrogen splitting by pyramidalized 13–15 donor–acceptor cryptands: A computational study

A series of new donor–acceptor cryptands, where pyramidalized donor (azaadamantane) and acceptor (bora/ala/adamantane) molecules are spatially oriented toward each other and linked via aromatic spacer, are constructed and computationally studied at M06-2X and ωB97X-D levels of theory. Kinetic stability of the perfluorinated bora- and ala-adamantane with respect to F migration to group 13 element is demonstrated. The effectiveness of the constructed cryptands, featuring pyramidalized perfluorinated acceptor moieties, in the heterolytic splitting of molecular hydrogen is predicted. Hydrogen splitting is highly exothermic and exergonic and is accompanied by small activation barriers. The most promising candidates for the experimental studies are identified. © 2019 Wiley Periodicals, Inc.     

Conjugated random terpolymers based on benzodithiophene,diketopyrrolopyrrole, and 8,10‐bis(thiophen‐2‐yl)‐2,5‐di(nonadecan‐3‐yl)bis[1,3]thiazolo[4,5‐f:5′,4′‐h]thieno[3,4‐b]quinoxaline for Efficient Polymer Solar Cell

A series of novel donor–acceptor (D–A) random conjugated terpolymers P2‐P4 along with the homopolymers P1 (BDT‐DPP) and P5 (BDT‐BTDQ) were designed and synthesized by copolymerizing a benzo[1,2‐b:4,5‐b]dithiophene (BDT) donor with an electron‐deficient diketopyrrolo[3,4‐c]pyrrole (DPP) unit and a benzothiadiazolo[3,4‐e]quinoxaline (BTDQ) moieties of different electron‐withdrawing strengths, and the resultant terpolymers showed broad absorption profile ranging from 300 to 1200 nm. The HOMO levels of the polymers were adjusted from ?5.23 to ?5.11 eV, and the optical bandgaps were controlled from 1.32 to 1.13 eV by changing the molar ratio of DPP and BTDQ acceptors. These terpolymers were used as a donor along with PC₇₁BM as an acceptor for the creation of polymer solar cells, and the performance was optimized via variable the donor to acceptor ratio and solvent vapor annealing. The polymer solar cells made from the random terpolymer P3 showed the highest overall power conversion efficiency of (9.27%), which is higher than that for the corresponding homo‐polymers counterparts, that is, P1 (7.27%) and P5 (7.68%). The results demonstrate that the designing of random D‐A1‐D‐A2 terpolymers may be the best approach for efficient polymer solar cells. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1478–1485     

Formation of Highly Efficient,Long-Lived Charge Separated States in Star-Shaped Ferrocene-Diketopyrrolopyrrole-Triphenylamine Donor–Acceptor–Donor Conjugates

The significance of multiple number of donor–acceptor entities on a central electron donor in a star-shaped molecular system in improving light energy harvesting ability is reported. For this, donor–acceptor–donor type conjugates comprised up to three entities ferrocenyl (Fc)-diketopyrrolopyrrole (DPP) onto a central triphenylamine (TPA), ( 4 – 6 ) by the Pd-catalyzed Sonogashira cross-coupling reactions have been newly synthesized and characterized. Donor–acceptor conjugates possessing diketopyrrolopyrrole (1 to 3 entities) onto the central triphenylamine, ( 1 – 3 ) served as reference dyads while monomeric DPP and Fc-DPP served as control compounds. Both DPP and Fc-DPP carrying conjugates exhibited red-shifted absorption compared to their respective control compounds revealing existence of ground state interactions. Furthermore, DPP fluorescence in 4 – 6 was found to be quantitatively quenched while for 1 – 3 , this property varied between 73–65 % suggesting occurrence moderate amounts of excited state events. The electrochemical investigations exhibited an additional low potential oxidation in the case of Fc-DPP-TPA based derivatives ( 4 – 6 ) owing to the presence of ferrocene unit(s). This was in addition to DPP and TPA redox peaks. Using spectral, electrochemical and computational studies, Gibbs free-energy calculations were performed to visualize excited state charge separation (ΔG_CS) in these donor–acceptor conjugates as a function of different number of Fc-DPP entities. Formation of Fc⁺-DPP^.−-TPA charge separated states (CSS) in the case of 4 – 6 was evident. Using spectroelectrochemical studies, spectrum of CSS was deduced. Finally, femtosecond transient absorption spectral studies were performed to gather information on excited state charge separation. Increasing the number of Fc-DPP entities in 4 – 6 improved charge separation rates. Surprisingly, lifetime of the charge separated state, Fc⁺-DPP^.−-TPA was found to persist longer with an increase in the number of Fc-DPP entities in 4 – 6 as compared to Fc-DPP-control and simple DPP derived donor–acceptor conjugates in literature. This unprecedented result has been attributed to subtle changes in ΔG_CS and ΔG_CR and the associated electron coupling between different entities.     

Panchromatic Light Capture and Efficient Excitation Transfer Leading to Near‐IR Emission of BODIPY Oligomers

All‐BODIPY‐based (BODIPY=boron‐dipyrromethene) donor–acceptor systems capable of wide‐band absorbance leading to efficient energy transfer in the near‐IR region are reported. A covalently linked 3‐pyrrolyl BODIPY–BODIPY dimer building block bearing an ethynyl group at the meso‐aryl position is synthesized and coupled with three different monomeric BODIPY/pyrrolyl BODIPY building blocks with a bromo/iodo group under Pd⁰ coupling conditions to obtain three covalently linked 3‐pyrrolyl‐BODIPY‐based donor–acceptor oligomers in 19–29 % yield. The oligomers are characterized in detail by 1D and 2D NMR spectroscopy, high‐resolution mass spectrometry, and optical spectroscopy. Due to the presence of different functionalized BODIPY derivatives in the oligomers, panchromatic light capture (300–725 nm) is witnessed. Fluorescence studies reveal singlet–singlet energy transfer from BODIPY monomer to BODIPY dimer leading to emission in the 700–800 nm range. Theoretical modeling according to the Förster mechanism predicts ultrafast energy transfer due to good spectral overlap of the donor and acceptor entities. Femtosecond transient absorption studies confirm this to be the case and thus show the relevance of the currently developed all‐BODIPY‐based energy‐funneling supramolecular sytems with near‐IR emission to solar‐energy harvesting applications.     

硫脲催化硝基烯与硫叶立德的不对称Michael加成反应

基于密度泛函理论研究了氯代苯基硫脲催化的硝基苯乙烯与硫叶立德的Michael加成反应,确定了控制反应立体选择性的C―C键形成步骤的过渡态结构,计算了过渡态的相对能量和反应势垒,弄清了硫脲催化的微观反应机理,探讨了硫脲催化性能的微观本质.结果表明,反应有利于反式Michael加成产物的形成,硫脲在反应中作为质子给体,首先与质子受体硝基苯乙烯形成双氢键配合物,通过授受体间的电荷转移活化硝基苯乙烯的β-C原子增强其亲电性,有利于硫叶立德的亲核进攻.